Archiv / Down Supportthread_3 Becker Z099, Z103-Z109, Z201-Z205, Z213-Z217, Z302

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Ich finde keine "Device"..nur im Ordner "LICENSE" gibnts ne device_nng . Aber wenn ich die mit dem textpad öfnne erscheinen nur kryptische Zeichen ("hex..."?)

 

[Goldibear]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Hallo,

nun wenn Du mal in der Data.zip unter projecr_config schaust dort liegt eine Becker.ini
des Z203 drin, wenn Du die mal öffnest und etwas runterscrollst dann siehst Du diesen Eintrag
[folders]
secondary_root="igo8"
models="ui_becker\gfx"
das besagt doch ganz klar, schau auf die Speicherkarte ob der Ordner iGO8 dort vorhanden ist
und lese dort ebenfalls die Daten aus und dann sollte das auch klappen mit der Erkennung.
Das das Z203,Z204 und Z205 Baugleich sind haben alle drei auch den gleichen Eintrag dort.

 

[ruderbernd]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Data.zip unter projecr_config

Ich meine das der Device Eintrag auf Data.zip/config/devices verlinkt. Zumindest da habe ich meine selbst erstellte Device für die E4440 Geräte gespeichert

 

[Goldibear]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Ja das ist schon richtig.
Nur in der dortigen ini stehen die Parameter damit das Navi laut seiner Einstellungen
gesteuert werden kann was Lautstärke und sonstiges wie TMC angeht.
Aber der Verweis wo er auch noch nach Daten schauen soll ist nur in der Data.zip\project_config\becker.ini
oder man hat einen Skin drauf dann liegt es dort auch unter project_config.
Aber das Navi wird sich anders benehmen und anders reagieren.

 

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Aber der Verweis wo er auch noch nach Daten schauen soll ist nur in der Data.zip\project_config\becker.ini
oder man hat einen Skin drauf dann liegt es dort auch unter project_config.
Aber das Navi wird sich anders benehmen und anders reagieren.

Ob das was hilft? Hier meine Becker.ini

Spoiler

; ==========================================================
; PROJECT SPECIFIC CONFIGURATION

[2d]
show_planned_route_arrows=0
show_guidance_arrows=0
show_guidance_strip=0
render_during_animation=1

[3d]
show_planned_route_arrows=0
show_guidance_arrows=0
show_guidance_strip=1
car_day="becker_car_gps.mdl"
car_night="becker_car_gps.mdl"
ghost_day="becker_car_ghost.mdl"
ghost_night="becker_car_ghost.mdl"
minimum_flag_distance=2000
planned_route_track_width=6
planned_route_contour_Width=2
forced_fov=26

[3d_config]
disable_roadsign_navigation_mode=0


[debug]
enable_buildings=1
enable_roadshadow=1
enable_roadsign=1
enable_landmark_occlusion=1
allow_discard_sound_queue=0
disable_oasispoi=1
disable_outlookpoi=1
supress_highway_enter=1
supress_leave_ferry=1
already_running_assert=0
skip_eula=1

[feature]
signpost_coloring=1
tmc_event_coloring=1

[folders]
secondary_root="igo8"
models="ui_becker\gfx"

[gps]
default_latitude=48.774274
default_longitude=9.180858
discard_dop_level=49.0

[interface]
distance_unit_limit_meters_0=1000
distance_limit_meters_0_0=0
distance_rounding_meters_0_0=10
distance_limit_meters_0_1=500
distance_rounding_meters_0_1=100
distance_limit_meters_0_2=10000
distance_rounding_meters_0_2=1000

distance_unit_limit_yards_0=2640
distance_limit_yards_0_0=0
distance_rounding_yards_0_0=10
distance_limit_yards_0_1=2640
distance_rounding_yards_0_1=176
distance_limit_yards_0_2=17600
distance_rounding_yards_0_2=1760

distance_unit_limit_meters_1=-1
distance_limit_meters_1_0=0
distance_rounding_meters_1_0=1

distance_unit_limit_yards_1=-1
distance_limit_yards_1_0=0
distance_rounding_yards_1_0=1

skin="ui_becker"
builtin_themes="SKIN~Night|skin_night"
theme_night="skin_night"
resolution_dir="480_272"
show_zoombar=1
show_timezoneslider=1
reset_os_timezone=1
vga=0
show_exit=0
inputtext_cursor_char1=0
inputtext_cursor_char2=0
emptylist_counter="1/1"
emptylist_page_number=1
emptylist_page_count=1
quicklist_address_format="$street$ $housenumber$, $city$"
quicklist_poi_format="$poiname$, $city$"
smartkey_for_multistrings=1
compass_velocity=4
laneinfo_signpost_enabled=1
highlighted_cityname_first=1
;use_autohint=0
useminaspect=1
input_check_empty_title=0
showexitnum=0
itinerbrackets=0
enable_stateanim=1
use_big_lang_flag=1
make_up_exonym=0

traffic_voice_recalc=0
traffic_voice_trafficjam=0

night_mode_altitude=0

[itiner]
show_only_ahead_of_car=1
show_only_till_next_viapoint=0
show_prev_manuevers=1

[keyboard]
panels="ui_becker/config/keyboard.ini"

[local]
default_language="english GB"

[map]
zoomscale_disappearing=1
3d_buildings=1
map_mode="3D"
auto_nightmode=0
center_animation=0

[modules]
IHISTORY_MANAGER="QUICKLIST_MANAGER"
IWAYPOINT_LIST_MANAGER="BECKER_WAYPOINT_LIST_MANAGER"
IITINER_LIST_IMP="BECKER_ITINER_LIST"

[mydata]
max_quicklist=250
max_favorites=1
cityhistory_size=1600

[navigation]
maneuver_near_threshold=1000
can_pass_via_from_itinerconfig=0
dead_reckoning_duration=480000
use_duration_for_tunnel=0
stop_at_tunnel_end=1

[oasis]
include_directories="%SDCARD%,%MYFLASHDISK%\GAMES,%MYFLASHDISK%\Media"
game_root="%MYFLASHDISK%\GAMES"
clock0_tz_index=30
clock1_tz_index=47

[oasis.pictures]
slideshow_time=1

[other.becker]
tunnel_auto_dim="1"
tunnel_dim_value=2
oasis_volume_values="0,2,10,25,40,60,80,105,130,155,180"

[other.becker.navigation]
highway_maneuver_near_threshold=3000

[other.becker.route]
avoid_highway_weight=100
avoid_unpaved_weight=100
avoid_ferry_boardingtime=900
avoid_uturn_penalty=1000
permit_needed_weight=150

[other.becker.poi]
poi_on_route_category1="Petrol_Station"
poi_on_route_category2="Parking"
poi_on_route_category3="Restaurant"
poi_search_min_interval=5000
poi_search_max_interval=20000

[poi]
use_multi_poi_icon=0
force_center_poi_icon=1
default_visibility_altitude=3000
use_lastknowngps=1
sort_order="Petrol_Station,Restaurant,Accomodation,Medical,Parking"
priority="Petrol_Station,Restaurant,Accomodation,Medical,Parking"
sort_by_config=1
detour_interval_1=5000
detour_interval_2=10000
detour_interval_3=30000
picturepoi_has_mypicturepoi=0
kml_icon_priority=100000
kml_draw_as_multipoi=0
kml_show_please_wait=1

[popup]
on_state="st_NavigateMap"
popup_state="st_ArrowPlace"

[power]
backlight_lang_view_forced=100
allow_battery_full=1

[route]
allow_save_route=0
city_show_coszip=1
city_show_streetzip=1
streetzip_max_length=10
correctness=100
continue_with_ferry=1
allow_unpaved=1
allow_highway=1
allow_ferry=1
allow_toll=1
allow_charge=1
allow_uturn=1
allow_special=1
cross_border_routes=1
fast_car_speed=130
fast_car_multiplactor=110
low_speed_zone_penalty=150

[scheduler]
disable_smooth_anim=1

[screen]
menu_animation=1
nightmode=0

[search_preferred_cities]
;Germany
GER_A="10.897884,48.370335,Augsburg"
GER_C="12.921427,50.836375,Chemnitz"
GER_G="7.092494,51.511336,Gelsenkirchen"
GER_I="11.425223,48.762364,Ingolstadt"
GER_N="11.073936,49.454311,Nürnberg"
GER_Q="11.138583,51.793245,Quedlinburg"
GER_R="12.132443,54.078963,Rostock"
GER_S="9.171917,48.767677,Stuttgart"
GER_D="7.458289,51.516611,Dortmund"
GER_M="11.577515,48.136412,München"
;Austria
AUT_A="14.870656,48.124486,Amstetten"
AUT_B="9.743667,47.503790,Bregenz"
AUT_D="9.743774,47.413196,Dornbirn"
AUT_E="16.518944,47.845567,Eisenstadt"
AUT_H="13.092603,47.681465,Hallein"
AUT_M="16.284394,48.085891,Mödling"
AUT_N="16.245504,47.812884,Neustadt(Wiener)"
AUT_O="16.213145,47.287613,Oberwart"
AUT_Q="15.992377,47.882391,Quarb"
AUT_R="13.490046,48.209864,RiedImInnkreis"
AUT_T="14.238473,48.221575,Traun"
AUT_U="15.402185,46.967922,Unterpremstätten"
AUT_V="13.849184,46.618106,Villach"
AUT_W="16.368795,48.202546,Wien"
AUT_Y="14.893834,47.947942,Ybbsitz"
AUT_I="11.391299,47.267990,Innsbruck"
;Switzerland
SUI_A="7.538106,47.551596,Allschwil"
SUI_B="7.587675,47.548743,Basel"
SUI_C="9.531178,46.850215,Chur"
SUI_D="8.622217,47.399783,Dübendorf"
SUI_F="7.153678,46.803740,Fribourg"
SUI_H="8.599023,47.260044,Horgen"
SUI_K="7.414264,46.922874,Köniz"
SUI_M="6.910496,46.431696,Montreux"
SUI_O="7.904015,47.352112,Olten"
SUI_P="6.659788,46.510255,Pully"
SUI_Q="9.241180,47.107897,Quarten"
SUI_R="7.649473,47.584412,Riehen"
SUI_S="9.373708,47.426396,SanktGallen"
SUI_T="7.630175,46.756961,Thun"
SUI_V="6.080469,46.212343,Vernier"
SUI_E="8.302839,47.078403,Emmen"
SUI_L="6.632330,46.519594,Lausanne"
;France
FRA_B="-0.581047,44.836632,Bordeaux"
FRA_C="3.081828,45.777622,Clermont-Ferrand"
FRA_E="4.395527,45.439881,ÉtienneSaint"
FRA_F="6.731776,43.432601,Fréjus"
FRA_K="2.356965,48.812130,Kremlin-BicêtreLe"
FRA_L="4.828965,45.759407,Lyon"
FRA_N="7.278235,43.701534,Nice(Nizza)"
FRA_R="-1.684475,48.107515,Rennes"
FRA_S="7.736423,48.585083,Straßburg"
FRA_T="1.448686,43.605744,Toulouse"
FRA_U="2.169466,48.681617,Ulis(Les)"
FRA_W="3.215265,50.701126,Wattrelos"
FRA_Y="2.488177,48.716611,Yerres"
FRA_A="-0.552371,47.471310,Angers"
FRA_D="5.044187,47.326451,Dijon"
FRA_J="0.662546,47.350945,Joué-lès-Tours"
;Luxembourg
<<hab die ganzen Länder rausgelöscht wegen Länge...

[smartzoom]
overview=0
use2d=1
restore_smartzoom_on=1

[sound]
ding=0
mute_os_key=1
os_muted=0
queue_length=200
sound_muted=0
nocontrol_sound="invalid"
disabled_sound="invalid"
mapclick_sound="mapclick"
incall_sound="incall"

[sound.announcer]
gps_signal_lost=0
gps_disconnected=0

;speech scheduler state table
[speech_sources]
sources="ss_guidance,ss_test,ss_recalculate,ss_warning,ss_asr,ss_dialogout"

; what comes what is
;1: I dont want to hear can go on
;2: I want to hear after can go on
;3: I want to hear now after it can go on
;4: I want to hear now cant go on

[ss_guidance]
ss_guidance=4
ss_test=1
ss_recalculate=4
ss_warning=2
ss_asr=2
ss_dialogout=2

[ss_test]
ss_guidance=3
ss_test=4
ss_recalculate=3
ss_warning=3
ss_asr=2
ss_dialogout=2

[ss_recalculate]
ss_guidance=3
ss_test=3
ss_recalculate=4
ss_warning=2
ss_asr=2
ss_dialogout=2

[ss_warning]
ss_guidance=3
ss_test=3
ss_recalculate=3
ss_warning=2
ss_asr=2
ss_dialogout=2

[ss_asr]
ss_guidance=3
ss_test=3
ss_recalculate=2
ss_warning=2
ss_asr=2
ss_dialogout=2

[ss_dialogout]
ss_guidance=3
ss_test=3
ss_recalculate=2
ss_warning=2
ss_asr=2
ss_dialogout=4

[timezone]
manual_dst=0
sync_os_timezone=0

[tmc]
auto_tuning=1
use_new_standard=1

[traffic.settings]
accident_interaction="ask"
closed_interaction="ask"
heavy_interaction="ask"
congestion_interaction="ask"
roadworks_interaction="ask"
closures_interaction="ask"
danger_interaction="ask"
weather_interaction="show"
police_interaction="show"
invalid_interaction="ask"

[tts]
announce_exit_directions=1
always_say_road_names=1
skip_exit_numbers=2
tts_logics=6
tts_gc_size=524288

;volume channels priority order
[volume_channels]
channels="vmc_phone,vmc_alarmeffect,vmc_user,vmc_voice,vmc_effect,vmc_media"
volumefade=1000

[vmc_phone]
enter_script="sc_volmanager_phone"
vmc_alarmeffect=100
vmc_voice=0
vmc_effect=50
vmc_media=-1

[vmc_alarmeffect]
enter_script="sc_volmanager_alarmeffect"
vmc_voice=50
vmc_effect=100
vmc_media=20

[vmc_voice]
enter_script="sc_volmanager_voice"
vmc_effect=100
vmc_media=20

[vmc_effect]
enter_script="sc_volmanager_effect"
vmc_media=100

[vmc_user]
vmc_voice=0
vmc_effect=0
vmc_media=0

[vmc_media]
enter_script="sc_volmanager_media"

[warning]
speedcam_warning=0
speedcam_soundtype=0
speedcam_visualtype=0
overspeed_sound=""
section_beep_sound="!alert4"
approach_beep_sound="!alert3"
warn_distances="100:1000,70:600,50:280"
approach_beep_distances="-1"
speedcam_max_angle=45

[phone]
unique_callhistory=1
ringtone_delta=5000

 

[Goldibear]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Mal eine Frage.
Woher hast Du diese becker.ini sowas habe ich noch nie gesehen.
Ob das alles da so reingehört das würde ich bezweifeln.
Da hast Du alles reinkopiert was es zu holen gibt nur gehört es dort wirklich so rein.
Schau mal so sieht eine originale becker.ini aus

Spoiler

; ==========================================================
; DEVICE SPECIFIC CONFIGURATION

info_names="BECKER Z204 PNA"

[bluetooth]
driver="SCP"
enum_all_devices=1
devicename="Becker TA"
data_op_method=1
pairpin="0000"

[debug]
nortc=0
max_memory=73400320

[dynamiccompressor]
working=1
highpass_freq=300
thrs=24703
ratio=4
gain=3
length=512

[gps]
port=1
baud=57600
devicename_template="VSP%d:"
maximise_baud=0

[media]
volume_method=1

[modules]
IOSVOLUME_MANAGER="BECKER_OSVOLUME_MANAGER"
IPHONE_MANAGER="BECKER_PHONE_MANAGER"
IOASIS_BLUETOOTH_MANAGER="BECKER_BLUETOOTH_MANAGER"

[other.becker]
tunnel_dim_value=65
backlight_oncharger=100

[phone]
driver="BT"
use_callhistory_ext=1

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 8
backlight_min = 1
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 39
backlight_events = 1
skip_resume_process=1
skip_suspend_process=1
powermgm_state="0"
backlight_day="80"
backlight_night="30"

[rawdisplay]
screen_x=480
screen_y=272
highres=0
class="landscape"
driver="GX"

[scp]
sdsparam= -f "\My Flash Disk\igo8\SDS\SSS.CFG" -s sss_config -k HostAgent.Port=2010 MonitorService.Port=2011 SASService.Port=6010 VerboseLevel=2
pssparam= -f "\My Flash Disk\igo8\PSS\pss_win32.cfg" -s pss_config -k HostAgent.Port=2020 MonitorService.Port=2021 SASService.Port=6020 VerboseLevel=2

[sound]
;mute_os_key=1
;use_method=1
effect_volume=100
voice_volume=90
phone_volume=128
dynamic_volume_type=3
dynamic_volume_minspeed=60
dynamic_volume_maxspeed=160
dynamic_volume_os_volume_max=250
dynamic_volume_os_amplification_step=5
os_volume=190
config=maximum

[timezone]
patch_dst=1

[tmc]
source="gnsport"
version=-1
enable_igo_provider=1
tuner_alg_search_force_on=1
port="COM,1"
baud=38400
tuner_alg_search_force_on=1
tuner_alg_search_timeout=20000
tuneralg_rds_packet_timeout=4000
tuneralg_8a_packet_timeout=6000
tuneralg_3a_packet_timeout=8000
tuneralg_last_8a_packet_timeout=120000

und dann schau einmal in eine gecrackte des gleichen Navis
und auch dort sind die Einträge nicht anders schau mal hier

Spoiler

; ==========================================================
; DEVICE SPECIFIC CONFIGURATION

info_names="BECKER Z204 PNA"

[bluetooth]
driver="SCP"
enum_all_devices=1
devicename="Becker TA"
data_op_method=1
pairpin="0000"

[debug]
nortc=0
max_memory=73400320

[dynamiccompressor]
working=1
highpass_freq=300
thrs=24703
ratio=4
gain=3
length=512

[gps]
port=1
baud=57600
devicename_template="VSP%d:"
maximise_baud=0

[media]
volume_method=1

[modules]
IOSVOLUME_MANAGER="BECKER_OSVOLUME_MANAGER"
IPHONE_MANAGER="BECKER_PHONE_MANAGER"
IOASIS_BLUETOOTH_MANAGER="BECKER_BLUETOOTH_MANAGER"

[other.becker]
tunnel_dim_value=65
backlight_oncharger=100

[phone]
driver="BT"
use_callhistory_ext=1

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 8
backlight_min = 1
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 39
backlight_events = 1
skip_resume_process=1
skip_suspend_process=1
powermgm_state="0"
backlight_day="80"
backlight_night="30"

[rawdisplay]
screen_x=480
screen_y=272
highres=0
class="landscape"
driver="GX"

[scp]
sdsparam= -f "\My Flash Disk\igo8\SDS\SSS.CFG" -s sss_config -k HostAgent.Port=2010 MonitorService.Port=2011 SASService.Port=6010 VerboseLevel=2
pssparam= -f "\My Flash Disk\igo8\PSS\pss_win32.cfg" -s pss_config -k HostAgent.Port=2020 MonitorService.Port=2021 SASService.Port=6020 VerboseLevel=2

[sound]
;mute_os_key=1
;use_method=1
effect_volume=100
voice_volume=90
phone_volume=128
dynamic_volume_type=3
dynamic_volume_minspeed=60
dynamic_volume_maxspeed=160
dynamic_volume_os_volume_max=250
dynamic_volume_os_amplification_step=5
os_volume=190
config=maximum

[timezone]
patch_dst=1

[tmc]
source="gnsport"
version=-1
enable_igo_provider=1
tuner_alg_search_force_on=1
port="COM,1"
baud=38400
tuner_alg_search_force_on=1
tuner_alg_search_timeout=20000
tuneralg_rds_packet_timeout=4000
tuneralg_8a_packet_timeout=6000
tuneralg_3a_packet_timeout=8000
tuneralg_last_8a_packet_timeout=120000

und siehe da nichts von deinen Einträgen, dass sieht
eher nach einer Sys.txt aus die so aufgebaut wurde ob das aber alles sauber arbeitet wie gesagt
das bezweifle ich ganz stark.

 

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Systext ist die hier:
[device]
type="BECKER_Z203"
<<<<<<<<<<<<<<<<<<<<<<<<
Hab grade im Archiv geschaut...selbst vor 4 Jahren schaute diese Datei schon so aus....

Auch beim Pro 50...

Reden wir von unterschiedlichen Ordnern in denen diese Datei ist?
Meine ist aus:
Navigator/ DATAzip/projectconfig

 

[Goldibear]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Hallo,

ja das ist ja richtig.
In der Data.zip\project_config steht diese becker.ini das stimmt schon.
Und schau dir in meinen Post die becker,ini an dann erkennst Du den Unterschied.
Der Verweis in der Sys.txt auf den Devive Eintrag liest die becker.ini in der Data.zip\Config\Device aus und nichts anderes.
Damit greift er doch nicht auf die andere zu beim starten.
Erst wenn alles geladen ist kommt die ins Spiel und nicht anders. Diese ist für den Skin maßgebend also das Menü der
Becker iGO Software damit alle Funktionen gegeben sind die sich im Menü befinden.

 

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Jetzt hab ich nicht verstanden was ich tun soll.
Mein Navi GEHT ja- mit der "falschen" projectconfig.
DU hast ne "device spezifische" ich ne "PROJEKTspezifische".
die KÖNNEN doch nicht aus dem gleichen Ordner sein oder?
Bin am Durchdrehen....

 

[ruderbernd]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Mein Navi GEHT ja

Was ist denn dann dein Problem?

 

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Das hab ich in meinem ersten Beitrag zu dem Thema geschrieben:
Ich HABE Karten auf die SD karte ausgelagert, mit der von mir beschrieben Ordnerstruktur
Waasols Anleitung zu Folge dürfte das Navi die Karten nicht lesen können.
Nun wollte ich Verständnisfragen stellen,
<1.) Warum es scheinbar doch geht (trotz der anderen config)
<2.) was der Unterschied zwischen
Wasools device config und
MEINER project config

WIE kann ein derart zerschossendes Ding funzen?

 

[bobbiman]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

@
Link ist nicht mehr aktiv.

Ich kann jetzt nicht ganz folgen, warum sollte dein Vorhaben nicht möglich sein?
Auf meinem Z099 läuft von Becker bis Primo alles, sowohl mit Karten von MFD als auch von SD, ganz wie ich möchte. Besorge dir für dein Z099 die device.ini vom Z213, pflege sie in die Data.zip ein, und verweise in der sys.txt auf diese Datei. Damit hast du keine Probleme wegen Helligkeit (100%), GPS und auch TMC. Das Ganze funktioniert mit Becker-Soft und auch mit Primo.
Wenn du Sachen auf SD auslagern willst, dann kannst du dir das mal rein ziehen, wenn du lust hast: https://www.digital-eliteboard.com/...software-fuer-den-content-ordner-zugriff.html

 

[frizzzcat]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Es war wie ich vermutete:
Wir (wasol und ich) sprachen von verschiednen Ordnern.
HIER die "DEVICE" specifik config

Spoiler

; ==========================================================
; DEVICE SPECIFIC CONFIGURATION

info_names="BECKER Z203 PNA"

[bluetooth]
driver="SCP"
enum_all_devices=1
devicename="Becker TA"
data_op_method=1
pairpin="0000"

[debug]
nortc=0

[dynamiccompressor]
working=1
highpass_freq=300
thrs=24703
ratio=4
gain=3
length=512

[gps]
port=1
baud=57600
devicename_template="VSP%d:"
maximise_baud=0

[media]
volume_method=1

[modules]
IOSVOLUME_MANAGER="BECKER_OSVOLUME_MANAGER"
IPHONE_MANAGER="BECKER_PHONE_MANAGER"
IOASIS_BLUETOOTH_MANAGER="BECKER_BLUETOOTH_MANAGER"

[other.becker]
tunnel_dim_value=65
backlight_oncharger=100

[phone]
driver="BT"
use_callhistory_ext=1

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 8
backlight_min = 1
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 39
backlight_events = 1
skip_resume_process=1
skip_suspend_process=1
powermgm_state="0"
backlight_day="80"
backlight_night="30"

[rawdisplay]
screen_x=480
screen_y=272
highres=0
class="landscape"
driver="GX"

[scp]
sdsparam= -f "\My Flash Disk\igo8\SDS\SSS.CFG" -s sss_config -k HostAgent.Port=2010 MonitorService.Port=2011 SASService.Port=6010 VerboseLevel=2
pssparam= -f "\My Flash Disk\igo8\PSS\pss_win32.cfg" -s pss_config -k HostAgent.Port=2020 MonitorService.Port=2021 SASService.Port=6020 VerboseLevel=2

[sound]
;mute_os_key=1
;use_method=1
effect_volume=100
voice_volume=90
phone_volume=128
dynamic_volume_type=3
dynamic_volume_minspeed=60
dynamic_volume_maxspeed=160
dynamic_volume_os_volume_max=250
dynamic_volume_os_amplification_step=5
os_volume=190
config=maximum

[timezone]
patch_dst=1

[tmc]
source="gnsport"
version=-1
enable_igo_provider=1
tuner_alg_search_force_on=1
port="COM,1"
baud=38400
tuner_alg_search_force_on=1
tuner_alg_search_timeout=20000
tuneralg_rds_packet_timeout=4000
tuneralg_8a_packet_timeout=6000
tuneralg_3a_packet_timeout=8000
tuneralg_last_8a_packet_timeout=120000

Einwände?

- - - - - - - - - -
Auch bobbiman stelle ich die Frage:
In meiner sys steht nur: Device z203.
TROTZDEM scheint es zu funzen- WARUM?
(igo8)
Gibt es denn MEHRERE sys txt?
in verschiednen Ordnern (so wie bei de configs?)

 

[bobbiman]

Hier ist die: becker_Z213.ini

Kopiere den Inhalt aus dem Spoiler in deinen Text-Editor und speichere die Datei dann als becker_Z213.ini ab

Spoiler

; ==========================================================
; DEVICE SPECIFIC CONFIGURATION

info_names="BECKER Z213 PNA"

[3d]
shapetile_resolution=128
cell_lod_modifier=8

[bluetooth]
driver="SCP"
enum_all_devices=1
devicename="Becker TA"
data_op_method=1
pairpin="0000"
autoconn_cycle_devices_max_count=-1
autoconn_first_device=1
autoconn_last_on_link_loss=1

[debug]
nortc=1

[dynamiccompressor]
compressor=1
config=high

[gps]
port=1
baud=57600
devicename_template="VSP%d:"
maximise_baud=0

[guidancecompressor]
compressor=1
config=high

[media]
volume_method=2

[modules]
IOSVOLUME_MANAGER="BECKER_OSVOLUME_MANAGER"
IPHONE_MANAGER="BECKER_PHONE_MANAGER"
IOASIS_BLUETOOTH_MANAGER="BECKER_BLUETOOTH_MANAGER"

[oasis]
include_directories="%SDCARD%,GAME::%app%/content/games,%MYFLASHDISK%/Media"

[other.becker]
oasis_volume_values="0,2,10,25,40,60,80,105,130,155,180"
voice_volume_scale=180
no_countdown_on_suspend_event=1
power_off_supported=0

[phone]
driver="BT"
use_callhistory_ext=1
play_in_band_tone=255

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 8
backlight_min = 1
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 39
backlight_events = 1
skip_suspend_process_all=1
disconnect_gps_on_suspend=0
powermgm_state="0"
backlight_day="80"
backlight_night="30"
backlight_tunnel_default="30"
tunnel_backlight_enabled=1

[rawdisplay]
screen_x=480
screen_y=272
highres=0
class="landscape"
driver="GX"

[scp]
psscfg="pss_win32.cfg"
psspath="scp"
parserpath="scp"
sacpath="scp"

[sound]
;mute_os_key=1
;use_method=1
effect_volume=70
voice_volume=90
phone_volume=128
dynamic_volume_type=2
dynamic_volume_minspeed=60
dynamic_volume_maxspeed=160
dynamic_volume_voice_volume_max=255
os_volume=255
config=maximum
speech_delay=1000
speaker_resume_sec=0

[timezone]
patch_dst=1

[tmc]
source="gnsport"
version=-1
enable_igo_provider=1
tuner_alg_search_force_on=1
internal_tmc_name="gnsport"
port_read_timeout=8000
port="COM,1"
baud=38400
tuner_alg_search_force_on=1
tuner_alg_search_timeout=10000
tuneralg_rds_packet_timeout=1500
tuneralg_8a_packet_timeout=3500
tuneralg_3a_packet_timeout=5000
ignore_suspend=1
ignore_resume=0

[warning]
truck_max_speed_warn=100

Auch wenn nichts in der sys.txt steht, so sucht sich die Software die richtigen Einstellungen. Ob damit aber alle Bestandteile einstellbar sind , daran zweifele ich.

Hier meine sys.txt für eine Primo 2.4 - Version (andere sehen ziemlich genau so aus)

Spoiler

sdcardpath="\\Storage Card\\"

[device]
type="BECKER_Z213"


[folders]
has_secondary_root=0
maps="..\..\addons\content\map"
poi="..\..\addons\content\poi"
dem="..\..\addons\content\dem"
buildings="..\..\addons\content\building"
tmc="..\..\addons\content\tmc"
phoneme="..\..\addons\content\phoneme"


[loading]
show_statustext=0
loading_bmp="loading.bmp"


[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2
automatic_direction_conversion=1
tts_gc_size=128

[interface]
extra_settings=1
show_exit=1
save_checksum=0
phone=0
;shutdown_time=0
shutdown_time=10


[debug]
experimental_features=1
skip_eula=1
perf_update_autostart = "1"
tmc_provider_list_plus=1
tmc_all_stations=1
hnr=1
show_hnr=1


[sound]
csv_voice_enabled=1
queue_length=150
sound_q_length=150
mute_os_key=1
ding_muted=1
maneuver_chimes=0

[3d]
max_poly_segments_shown_1=400
min_poly_segments_shown_1=200
max_pois=5
max_pois_on_horizont=3
max_speedcam=3
max_speedcam_on_horizont=1
planned_route_visible_behind_mountain

[3d_config]
disable_roadsign_navigation_mode=1
navi_mode_roadsign_dist_limit=200

[map]
set_max_bubble_labels=4
speedcam_visibility=500
poi_grouping_distance=0

[map_update_checker]
enabled=0

[navigation]
junction_view_type=mixed
junction_view_blink_time=1000
junction_view_blink_time_no_lane=1000

[other]
demo_enabled=0

[warning]
speedcam_warning=1
speedcam_enabled=1
is_spoken=1
warn_distances=130:500,120:400,100:400,80:300,70:300,60:250,50:200,30:150

[poi]
use_multi_poi_icon=0

[feature]
tmc_traffic_side=1

signpost_coloring=1
tunnel_guidance=0
;ding=0
ding_muted=0

[network]
available="0"

[tmc-http]
enabled=0

[http]
enabled=0

[camera.roundabout]
enabled=0

[route.histspeed]
enabled=1
show=1

[route]
hnr_ignored_missing_country_ids="*"
minimum_hnr_distance_km=250

 

[Goldibear]

AW: Supportthread_3 Becker Z099, Z1XX, Z2XX, Z302

Weil wie im Post #812 von mir der blau gekennzeichnete Text Eintrag in der becker.ini
im Ordner Data.zip\project_config\ in der dortigen becker.ini steht.
Diese Einträge die sind für den Skin und der Software zuständig daher weiß er das er auch
auf der SD karte nachschauen soll ob es weitere Content Einträge gibt.
Diese liest er aus und deshalb funktioniert es bei Dir.