Hello, Im new here. Can you guys help me with update MMI and navigation in my car. I have AUDI A4 AVANT 2013, in photo i'll show what i have in car actually. I found here some link
but I don't know if it fits in my car. Can someone help me which MMI and NAVI MAPS I have to download and how to install them into car?
Thank you very much
Sie müssen registriert sein, um Links zu sehen.
First i have this in car
HN+_EU_AU3G_P0612
8R0060884AR ECE 6.15.5
, I downloaded from this thread
1a. FW K0942 (nicht für 3G Basic (BNav) oder 3G High (HNav))
then I unpacked it on SD card, put in car and tried to update, but when i clicked on update and choosed SDcard slot 1, it seach for update, then for maybe 0,5sec showed screedn with start update, but after that it says UPDATE NOT FOUND or something like that...
Have I to choose another update or something is wrong?
Thanks B44B , problem was that i wasnt in red menu, MMI update completed, now Im going to update maps, so I put maps on card, again via red menu perform update and then I'll use Keldo 2017 6.24.2 activator script modified by DarkDll) - MAC Adr. wird nicht benötigt).
But I have a problem, I installed maps, everything good, and after that I put key in, waited 10 mins and pressed all 5 buttons at once, then insert card with activator but nothing happens.
Are you crazy? "....pressed all 5 buttons at once...... That's stupid!
Wrong!
Start your MMI, go to Navi, wait ca. 5 Minutes til Message appears "Navi Map is blocked" , insert SD with Activator, wait for first Message, turn a little bit right the big Knop to the right,
second Message appears, take out SD and make a reset (press the 3 buttons for 1 second simultaneously) see picture
Du musst Regestriert sein, um das angehängte Bild zusehen.
Content Keldo Fat32 formated SD-Card
Du musst Regestriert sein, um das angehängte Bild zusehen.
Anhänge
Du musst angemeldet sein, um die Anhangsliste zu sehen.
Okay so ... I updated MMI, then MAPS, then waited 10 minutes, inserted card with keldo, nothing happens, then i put card with vlasoff activator, went to engineer menu clicked update... car restarted and maps is running now (i dont know how it will be after 10minutes)...
so, i know it seems im dumb but im just new in this...
ok, so after 15min of driving with navigation without error its okay?
vlasoff log file says this
01/01/1970 00:02:23 - Failed to get mac-address, was the ignition switch on? continue anyway
01/01/1970 00:02:23 - The WLAN EEPROM token (2380) is not valid for this MMI (), but we know what we are dooing.
01/01/1970 00:02:23 - Installation successful
01/01/1970 00:22:18 - Failed to get mac-address, was the ignition switch on? continue anyway
01/01/1970 00:22:18 - The WLAN EEPROM token (2380) is not valid for this MMI (), but we know what we are dooing.
01/01/1970 00:22:18 - The activation is already installed
okaay hurray, two questions, I have audi SQ5 too, same process for that, i red that A4 maps is same for Q5? and is there another features which i can unlock through just card/script/or some special menu?