OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

OSCAM.SERVER ... mit dem fangen wir mal an und arbeiten uns dann durch die anderen Files... ok?

Spoiler

# OSCAM.SERVER

[reader]
label = v14
description = sky
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Ich würde gerne das USB-Paket hier zur Verfügung stellen mit dem ich das NAS zur Smartmouse überreden konnte. Wo mache ich den Upload?

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin .....

Also da hinkt kein Vergleich mit Verlaub..
Das schaffen alle hier aufgeführten Systeme mit einer CPU Load < 1 ...

Die CPU-Last ist ja völlig unstrittig .....
Allerdings reden wir von unterschiedlichen Prozessoren ......

... und an die ~3,5 Watt einer Raspel kommt so schnell keine `Alternative` ran .....

 

[pehedima]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Ändere den Reader wie folgt ab:

mhz                           = 357
cardmhz                       = 357

Mouseeinstellung:

oben,unten,unten,egal

oscam neu starten. Oder Besser gleich die ganze Box.

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin .....

OSCAM.SERVER ... mit dem fangen wir mal an

Die `Frequenzautomatik funktioniert an einer Raspel natürlich nicht

[reader]
label                         = v14
description                   = sky
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
mhz                           = 357
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,10,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Log-File

Spoiler

• 2015/06/30 11:24:04 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10851 (arm-marvell-linux-gnueabi-ssl-libusb)
• 2015/06/30 11:24:04 00000000 s (main) System name = Linux
• 2015/06/30 11:24:04 00000000 s (main) Host name = NAS_SERVER
• 2015/06/30 11:24:04 00000000 s (main) Release = 2.6.32.12
• 2015/06/30 11:24:04 00000000 s (main) Version = #5022 Wed Jan 7 14:19:44 CST 2015
• 2015/06/30 11:24:04 00000000 s (main) Machine = armv5tel
• 2015/06/30 11:24:04 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 16231
• 2015/06/30 11:24:04 00000000 s (main) signal handling initialized
• 2015/06/30 11:24:04 00000000 s (reader) v14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/06/30 11:24:04 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2015/06/30 11:24:04 00000000 s (main) waiting for local card init
• 2015/06/30 11:24:04 0015A0C0 h (webif) webif: decompressed 161818 bytes back into 385592 bytes
• 2015/06/30 11:24:04 0015A0C0 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2015/06/30 11:24:04 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78882
• 2015/06/30 11:24:04 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78512
• 2015/06/30 11:24:04 00159A98 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2015/06/30 11:24:06 00000000 s (main) init for all local cards done
• 2015/06/30 11:24:06 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2015/06/30 11:24:06 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2015/06/30 11:24:06 00000000 s (anticasc) anti cascading disabled

lsusb habe ich nun auch eingefügt

Du musst angemeldet sein, um Bilder zu sehen.

- - - - - - - - - -

Moin .....


Die `Frequenzautomatik funktioniert an einer Raspel natürlich nicht

[reader]
label                         = v14
description                   = sky
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
mhz                           = 357
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,10,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

Soll ich das nun verwenden ?

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin .....

Soll ich das nun verwenden ?

Du könntest ....
... aber du hast ja die Änderungen der Frequenz ja drinne .....

Leider wird die Karte nicht erkannt ....

Ich habe meine V14 in der Raspel auf 6.00MHz laufen ....
... bilde mir ein, daß das etwas stabiler ist ......

Dazu die Dip-Schalter auf oben-unten-oben-oben
und mhz = 600 setzen .....

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Die Karte war noch nicht im Reader ;-)

Spoiler

• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 10 value f2 time_us 31
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 11 value af time_us 30
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 12 value 69 time_us 31
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 13 value 00 time_us 33
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 14 value ad time_us 12853
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 15 value f5 time_us 37
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 16 value f0 time_us 32
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 17 value ff time_us 31
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 18 value ff time_us 30
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 19 value f5 time_us 30
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 20 value 73 time_us 30
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 21 value 3f time_us 31
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Buffers readed 21 bytes total time_us 149087
• 2015/06/30 11:40:00 00159A98 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2015/06/30 11:40:01 00159A98 r (reader) v14 [mouse] card detected
• 2015/06/30 11:40:01 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78518
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] Setting baudrate to 38400 bps
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
• 2015/06/30 11:40:02 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10851 (arm-marvell-linux-gnueabi-ssl-libusb)
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 76719
• 2015/06/30 11:40:02 00159A98 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2015/06/30 11:40:06 00159A98 r (reader) v14 [mouse] card system not supported
• 2015/06/30 11:40:06 00159A98 r (reader) v14 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2015/06/30 11:40:06 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78681
• 2015/06/30 11:40:07 00159A98 r (reader) v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 11:40:07 00159A98 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/30 11:40:07 00159A98 r (reader) v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2015/06/30 11:40:08 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77134
• 2015/06/30 11:40:08 00159A98 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2015/06/30 11:40:12 00159A98 r (reader) v14 [mouse] card system not supported
• 2015/06/30 11:40:12 00159A98 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 11:40:12 00159A98 r (reader) v14 [mouse] card initializing error
• 2015/06/30 11:40:12 00000000 s (main) init for all local cards done
• 2015/06/30 11:40:12 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2015/06/30 11:40:12 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2015/06/30 11:40:12 00000000 s (anticasc) anti cascading disabled

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin ......

Die Karte war noch nicht im Reader

:363:

Die Karte wird nicht sauber initialisiert ......
Ich würde mal auf 6.0Mhz umstellen ....

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Spoiler

• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78645
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 1 value f1 time_us 9295
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 2 value f4 time_us 35
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 3 value e5 time_us 39708
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 4 value fb time_us 34
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 5 value ee time_us 250
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 6 value ef time_us 36
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 7 value fe time_us 33
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 8 value af time_us 56
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 9 value f3 time_us 32
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 10 value 7f time_us 30
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 11 value bc time_us 9014
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 12 value fc time_us 34
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 13 value fc time_us 32
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 14 value ff time_us 31
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 15 value 7e time_us 30
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 16 value bb time_us 32
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Flush readed byte Nr 17 value ff time_us 31
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Buffers readed 17 bytes total time_us 139069
• 2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2015/06/30 12:05:53 00159A98 r (reader) v14 [mouse] card detected
• 2015/06/30 12:05:53 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78084
• 2015/06/30 12:05:54 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79626
• 2015/06/30 12:05:55 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79978
• 2015/06/30 12:05:57 00159A98 r (reader) v14 [mouse] Error activating card.
• 2015/06/30 12:05:57 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79194
• 2015/06/30 12:05:58 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79974
• 2015/06/30 12:06:00 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79979
• 2015/06/30 12:06:01 00159A98 r (reader) v14 [mouse] Error activating card.
• 2015/06/30 12:06:01 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79244
• 2015/06/30 12:06:03 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 79987
• 2015/06/30 12:06:04 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 82087
• 2015/06/30 12:06:05 00159A98 r (reader) v14 [mouse] Error activating card.
• 2015/06/30 12:06:05 00159A98 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 12:06:05 00159A98 r (reader) v14 [mouse] card initializing error
• 2015/06/30 12:06:06 00000000 s (main) init for all local cards done
• 2015/06/30 12:06:06 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2015/06/30 12:06:06 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2015/06/30 12:06:06 00000000 s (anticasc) anti cascading disabled

Mit 6MHz ohne Änderungen in der oscam.server

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

mit 3,57MHz

Spoiler

• 2015/06/30 12:14:59 00159A98 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2015/06/30 12:15:00 00159A98 r (reader) v14 [mouse] card detected
• 2015/06/30 12:15:00 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77733
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] Setting baudrate to 38400 bps
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77428
• 2015/06/30 12:15:01 00159A98 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2015/06/30 12:15:05 00159A98 r (reader) v14 [mouse] card system not supported
• 2015/06/30 12:15:05 00159A98 r (reader) v14 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2015/06/30 12:15:06 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78473
• 2015/06/30 12:15:07 00159A98 r (reader) v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 12:15:07 00159A98 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/30 12:15:07 00159A98 r (reader) v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2015/06/30 12:15:07 00159A98 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77772
• 2015/06/30 12:15:07 00159A98 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2015/06/30 12:15:11 00159A98 r (reader) v14 [mouse] card system not supported
• 2015/06/30 12:15:11 00159A98 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 12:15:11 00159A98 r (reader) v14 [mouse] card initializing error
• 2015/06/30 12:15:12 00000000 s (main) init for all local cards done
• 2015/06/30 12:15:12 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2015/06/30 12:15:12 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2015/06/30 12:15:12 00000000 s (anticasc) anti cascading disabled
• 2015/06/30 12:15:12 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10851 (arm-marvell-linux-gnueabi-ssl-libusb)

 

[Pilot]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Mit 6MHz ohne Änderungen in der oscam.server

Hat die Änderung auf 6 mhz nicht übernommen:
2015/06/30 12:05:52 00159A98 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin ......

Mit 6MHz ohne Änderungen in der oscam.server

Warum .....?
Das kann nicht funktionieren .....
Ich zitiere mich mal selbst:

und mhz = 600 setzen .....

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

DICKES SORRY....... lol. Und danke für dein Zitat. Ich habe es übersehen. :wacko1:

Jetzt siehst das mit 6MHz schon etwas besser aus:

Spoiler

• 2015/06/30 12:34:18 00159A68 r (reader) v14 [mouse] card detected
• 2015/06/30 12:34:18 00159A68 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 78147
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] Setting baudrate to 38400 bps
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] Calculated work ETU is 15.50 us reader mhz = 600
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77105
• 2015/06/30 12:34:19 00159A68 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2015/06/30 12:34:20 00159A68 r (reader) v14 [mouse] Card type: P1TV
• 2015/06/30 12:34:20 00159A68 r (reader) v14 [mouse] Rom version: 20AA
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [mouse] Credit available on card: 0 euro
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [mouse] Extended 4C detected
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [mouse] found card system videoguard2
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [videoguard2] card detected
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/30 12:34:21 00159A68 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77950
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] Setting baudrate to 153600 bps
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77074
• 2015/06/30 12:34:22 00159A68 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Card type: P1TV
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Rom version: 20AA
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Credit available on card: 0 euro
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Extended 4C detected
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] FuseByte: 05
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Region Code: 00BO0102
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Country Code: DEU
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] Pincode read: 4367
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] PCB settings: FF FF FF FF
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] ready for requests
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [mouse] found card system videoguard2
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] card detected
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] ------------------------------------------------------------------
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] +---------+----------+---------------------+---------------------+
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 0046 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 007b --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 008e --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00ca --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:23 00159A68 r (reader) v14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/08/28-01:00:00 |
• 2015/06/30 12:34:24 00159A68 r (reader) v14 [videoguard2] ------------------------------------------------------from-ins70--

 

[colt2]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

Moin .....

Jetzt siehst das mit 6MHz schon etwas besser aus:

Jepp ....

Edit:
Wie sehen den nun deine oscam.conf und deine oscam.user aus?
Wie war das auf zumindest einem Client hast du Oscam?

 

[VVahnSinn]

AW: OSCAM auf Synology mit Smartmouse. Hilfe erbeten für erste Schritte

.conf und .user sind noch jungfräulich. Die lohnt es nicht zu posten. Das wäre dann wohl die nächste Baustelle nach der .server.

Die Clients, also die Edision VIP´s, verfügen über CCCam und NewCamd. OScam ist auf denen aktuell noch nicht möglich. Ich werde wohl aber einen der Clients sowieso auf Enigma bringen müssen, da die ILTV anscheinend nicht die EMM´s an die Oscam weiter reichen kann. Ich nehme daher einfach mal an, dass dann dieser Enigma-Client auch Oscam kann.