Gbox von Dream One schon jemand probiert?

[Osprey]

Hi,
hat jemand die gbox Binary der Dream One am OS Mio 4K schon probiert?

 

[Pilot]

Würde gerne testen, weiß nur nicht wie.
1. hab keine V13 Karte
2. Wo bekommeich gbox binary der Dreambox One her.

 

[DVB-T2 HD]

Läuft auf dem OS Mio 4K eine 64Bit Firmware?

 

[DarkStarXxX]

Würde gerne testen, weiß nur nicht wie.
1. hab keine V13 Karte
2. Wo bekommeich gbox binary der Dreambox One her.

Das ist die selbe wie die auf deinen PI.

 

[Pilot]

Läuft auf dem OS Mio 4K eine 64Bit Firmware?

Ja

Das ist die selbe wie die auf deinen PI.

Muß blöd nachfragen: wie bekomme ich die vom PI extrahiert. War Dank der freundlichen Unterstützung von Ostprey und d2z schon im Image enthalten.

 

[Osprey]

Hier mein Freund hat dodo die geladen: Gbox für Dreambox One läuft auf Raspberry Pi 3; 3+; 4
Schiebe die nach /usr/bin und gebe die Berechtigung 755. Dann mit putty starten /usr/bin/gbox -b

 

[Pilot]

Danke

werd es morgen versuchen zu testen.
Jetzt beginnt Abendbrot Zeit und gemeinsame TV Zeit mit meiner Holden.

 

[Osprey]

Falls es läuft pack ich das als ipk.
LG Osprey

 

[Pilot]

Hatte gbox nach usr/bin geschoben. Dort stand: gbox.aarch64. Beim Befehl: /usr/bin/gbox -b kam:-bash usr/bin/gbox: no such file or direktory
Nach Umbennen von gbox.arch64 in gbox kam das:

Spoiler

root@osmio4k:~# /usr/bin/gbox -b
starting now
Could not open gbox_cfg, using default settings!!!

gbox.net 2.2A/Linux@ARM ( Jun 15 2019, 16:35:37 ) git811.N.3
mode 03
AU:03/update:01/Keyfile:01 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
could not open /var/keys/irdeto
could not open /var/keys/seca
could not open /var/keys/via
could not open /var/keys/nagra
could not open /var/keys/conax
could not open /var/keys/crypto
could not open /var/keys/drecrypt
ignore.list file not found
cwshare cfg file not found
CPU ARM
using LinuxTV api3
could not open /var/keys/softcam.cfg
mode: any pid
entering main loop

 

[Osprey]

Es läuft klasse gemacht!

 

[Pilot]

Danke für die Blumen.
Du hast mich aber gut vorbereitet mit Beitrag 6
Was ist mit den Fehlermeldungen?

Spoiler

could not open /var/keys/irdeto
could not open /var/keys/seca
could not open /var/keys/via
could not open /var/keys/nagra
could not open /var/keys/conax
could not open /var/keys/crypto
could not open /var/keys/drecrypt
ignore.list file not found
cwshare cfg file not found
could not open /var/keys/softcam.cfg

 

[Osprey]

Heute Mittag bekommst du das ipk da ist der Ordner Vorhanden mit den configs und es kann los gehen. Läuft mit ATV Image oder?

 

[Pilot]

Ja
Halte openatv 6.3 immer aktuell. Owohl manchmal über 200 updates kommen. Helfe mir dann mit Stick und online flashen

 

[Osprey]

Im Anhang ist das ipk. Probiere mal.

 

[Pilot]

Hat geklappt
Das andere gbox hab ich vorher gelöscht.

Rechte waren auf 750 gesetzt. Hab sie auf 755 gesetzt
Mit dem Befehl: /usr/bin/gbox -b kam das

Spoiler

starting now
RS232gate=0 speed=9600

gbox.cfg

Spoiler

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 11 } 192.168.1.2 8024
F: { 12 } /var/log/ipc
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
#V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1
V: { 00 05 } #only com-ports


# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
F: { 43 } /dev/ttyUSB0 // rs232 com1# für externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# für externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo
#

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1
#F: { 12 } /var/log/gbox

cwshare.cfg

Spoiler

# allow maximum 06 share level for recieved card data
I: { 03 }

# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 00 20 00 2500 4500 }

# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }

# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
# G: { 17020000 1234 }
# G: { 0B000000 ABCD }
# G: { 05021510 AB34 }
# G: { 0D03A000 A234 }

# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
#M: { mydbox2.homeip.net { AA242456 }}

#
# Internet Friends rx tx password cod
#D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

#
# other local boxes
#D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
#D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}

#OScam lokal
M: { 127.0.0.1 { 1111AAAA }}
D: { 127.0.0.1 { 8010 7004 { 2222CCCC { 5 5 }}}}

softcam.cfg

Spoiler

# CAS settings (NEW)
#
#[generic]
#reset_rs232_buffer = 1 ; (default: 1) empty RS232 buffer before writing
#
#[slot-n] ; slot section with n=1..18
#include = /foo/slot.cfg ; looking for section parameters in user defined configuration file, only outside of a section defined parameters will be used
#initialization = basic ; (default: basic) [basic,extended] init card in basic or extended mode
#disable_pts = 0 ; (default: 0) enable/disable protocol type selection (PTS) handshake
#enable_ice = 0 ; (default: 0) enable/disable irdeto cryptoworks enveloped support
#enable_onionmode = 0 ; (default: 0) enable/disable irdeto/nagra aladin onion mode (1833(1702)1833)
#alternative_frequency = 0 ; (default: 0) check additional osc frequency, value in kHz, example 8MHz=8000000
#alternative_baudrate = 0 ; (default: 0) check additional baudrate for atr, value in bit/s, example 81861
#byte_delay = 0 ; (default: 0) unit (1e-6 s)
#instruction_delay = 0 ; (default: 0) unit (1e-3 s)
#
#enable_unique_emm = 0 ; (default: 0) set unique emm section filter on demux device
#enable_shared_emm = 0 ; (default: 0) set shared emm section filter on demux device
#enable_global_emm = 0 ; (default: 0) set global emm section filter on demux device
#block_unique_emm = 1 ; (default: 1) block unique address/hex_serial emm
#block_shared_emm = 1 ; (default: 1) block shared address/provider emm
#block_global_emm = 1 ; (default: 1) block global address/all_card emm
#block_user_emm = 1 ; (default: 1) block user emm, read from /var/tmp/remm.txt
#save_processed_emm = 0 ; (default: 0) save processed EMMs to (/var/tmp/scXX.emmproc)
#save_processed_emm_file= /var/keys/sc0X.emmproc; (default: /var/tmp/scXX.emmproc) user defined output file
#save_rejected_emm = 0 ; (default: 0) save rejected EMMs to (/var/tmp/scXX.emmblock)
#save_rejected_emm_file = /var/keys/sc0X.emmblock; (default: /var/tmp/scXX.emmblock) user defined output file
#
#sidfilter = 000C,000D ; define sids can dispatch or not dispatch by card
#sidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line local rule 00
# ; allow_all - old cwshare S-Line local rule 01
# ; allow_defined - old cwshare S-Line local rule 02
# ; deny_defined - old cwshare S-Line local rule 03
#sidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line global rule 00
# ; allow_all - old cwshare S-Line global rule 01
# ; allow_defined - old cwshare S-Line global rule 02
# ; deny_defined - old cwshare S-Line global rule 03
#sidfilter_teacher = card ; [card,network] use selected ecm request source to update sidfilter (add or delete current sid)
# ; card - old cwshare S-Line global rule 03, means allow defined and update by zone0
# ; network - old cwshare S-Line global rule 03, means allow defined and update by zone1
#
#pidfilter = 100C,100D ; define pids can dispatch or not dispatch by card
#pidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#pidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#
########################################################################################
#V13/14 Karten
#Sobald für die Karte eine Verlängerung gesendet wird erstellt die gbox in/tmp eine Datei
#Namens SC01.emmblock.Den dort enthaltenen Verlängerer kopiert ihr dann in eine Datei Namens remm.txt
#und schiebt diese dann nach /tmp die gbox arbeitet diese Datei dann automatisch ab,
#und verlängert dann die Karte.Ihr könnt die V13/14 karte natürlich auch in einen anderen Slot stecken ,
#ihr müßt dann aber die config genauso anlegen wie die für Slot 1.
#Solltet ihr noch mehr Karten haben und ein/en externe/n Reader/s benutzen dann müßt ihr die Slots erweitern.
#Ihr könnt bis zu 18 Slots erstellen. Slot1 und Slot2 sind immer eure internen Reader der Box ,ab Slot3 beginen dann
#eure externen Reader.

[generic]
reset_rs232_buffer = 1

[slot-1] # Exklusiv für V13/14 Karten
initialization = extended
disable_pts = 0
enable_ice = 0 # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
byte_delay = 0
instruction_delay = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 0
block_unique_emm = 1
block_shared_emm = 1
block_global_emm = 1
block_user_emm = 0
save_processed_emm = 1
save_rejected_emm = 1

[slot-2] # Karten die nicht geblock werden brauchen
initialization = extended
disable_pts = 0
enable_ice = 0 # # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0