Digital Eliteboard

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwert bleiben

Hilfe für Homesharing Oscam - CCcam gesucht

oerny1

Ist gelegentlich hier
Registriert
22. Oktober 2012
Beiträge
44
Punkte Reaktionen
4
ich hoffe mal wieder auf Eure tolle Hilfe. Nachdem meine ET9200 im Wohnzimmer jetzt super läuft (bis auf ein paar Freezer, aber da komm ich vielleicht später noch drauf zurück) möchte ich gerne das gleiche auch im Schlafzimmer haben.

Dazu hab ich mir nun gebraucht noch eine et9200 zugelegt und diese soweit ins Heimnetz eingebunden und zum Laufen gebracht.

Jetzt würde ich gerne mit den beiden Geräten HS betreiben und brauche Hilfe, wie ich meine Karte an den 2. Receiver weitergeben kann. Hab zwar schon sehr viel gelesen, weiß aber immer noch nicht, was ich genau wohin schreiben muss.

Karte: V13 mit Sky komplett und HD+


Server (ET9200 WZ)

Adresse: 192.168.178.20, kein Passwort vergeben

OpenATV 4.2

Oscam-Version: oscam-1.20-unstable_svn-r10642


Oscam-Conf

[global]

logfile = /var/log/oscam.log

clienttimeout = 9000

unlockparental = 1

nice = -1

maxlogsize = 1500

waitforcards = 0

dropdups = 1

lb_save = 100

lb_min_ecmcount = 4

lb_savepath = /tmp/.oscam/oscam.stat

failbantime = 15

failbancount = 3



[dvbapi]

enabled = 1

au = 1

user = meinebox

boxtype = dreambox


[webif]

httpport = 83

httphelplang = de

httprefresh = 15

httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255

appendchaninfo = 1


Oscam-User

[account]

user = meinebox

monlevel = 2

keepalive = 1

au = v13

group = 1


Oscam-Server

[reader]

label = v13

protocol = internal

device = /dev/sci0

caid = 09C4

boxid = 12345678

detect = cd

#ins7e11 = 15

mhz = 357

cardmhz = 2700

autospeed = 1

group = 1

emmcache = 1,3,2

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

blockemm-unknown = 1

saveemm-u = 1

ndsversion = 2



Client (Et9200SZ)

Adresse: 192.168.178.31, Kein Passwort vergeben
OpenATV 6.0
CCam 2.3.0


CCam.cfg (Ich hoffe, das ist das richtige, ist da nach der Installation praktisch gar nichts aktiv?)

# CCcam team uvadi CCcam v2.3.0

#

# Special greets go to all our friends all over the world, you know who you are!

#

# Specjalne podziekowania dla Ludzi z Polski, dzieki ktorym jest duzo nowych funkcji w wersji 2.0.0

# Ostatnim razem zapomnielismy o nich wspomniec w readme. DZieki Chlopaki!

#


######################################################################

# friends #

######################################################################

# syntax for to add a friend user to CCcam with the max up hops limit (default = 5)

# sharing of emus (default = 1), allow emm (default = 1), and optional

# downshare limits per share (default = no limits) and optional

# downshare limits per share based on caid:id:sid

# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)

# if no timeslot is defined 24 hrs a day is used

# emus are shared only one level down, even if no limits given

#

# max username length 20

# password length 'unlimited'

#

#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id:)downhops), caid:id:)downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address

#

# example:

#

# F: user1 pass1

#

# user1 gets all our shares at max 5 hops from us

# (our local cards + max five hops away). He can share down to his own

# clients. He also receive emu shares (if he has 'yes' behind his C: entry),

# and is allowed to send us emm.

#

# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }

#

# user2 gets only our local cards but no 0100:000080.

# and our 0622:000000 cards only for himself (1 hop down),

# and 0500 cards for himself plus one additional hop down.

# He also gets our emus, and is NOT allowed to send us emm (updates).

#

# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }

#

# user3 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# But he is not allowed to share 0100:000080 down to other users.

# He gets no emus from us, and he is allowed to send us emm.

#

# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }

#

# user4 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# But he is not allowed to share 0100:000080 down to other users.

# He gets no emus from us, and he is allowed to send us emm.

# He is also not allowed to view channel 0100:000080:15df

#

# F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }

#

# user4 gets all cards at a maximum of 5 hops away from us,

# and get's to share them down two further levels beyond his own level.

# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00

# outside these hours the share will not give cw's to the client

#

#

# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1

#

# user5 gets all cards at a maximum of 5 hops away from us

# user5 is only allowed to connect from the host 192.168.1.1

#



######################################################################

# connections #

######################################################################

# syntax for to add a client connection to other CCcam

# add yes on end to use friends emus (non public private key/emu,etc...),

# but only works when corresponding F line on server has '1' for <shareemus>

# optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)

#

#C: <hostname> <port> <username> <password> <wantemus> ( { caid:id:)uphops), caid:id:)uphops), ... } )

#

#note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.

#

# example:

#

# C: someserver.somedomain 12000 user1 pass1

# C: 192.168.1.2 12000 user2 pass2

# connects to CCcam without use of friends emus

#

# C: 192.168.1.2 12000 user3 pass3 yes

# connects to CCcam, and receives friends emus also.



# syntax for to add newcamd server connection

#

#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>

#

# example:

#

# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

#

# add a newcamd card, give it an offset of 2 hops, in the share list

#

# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2

#

# stealthy login on newcamd server:

#

# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1

#

# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic



# syntax for to add radegast server connection

#

#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>

#

# example:

#

# R: 127.0.0.1 678 0100 000080



# syntax for to add camd3 connection

#

#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>

#

# example:

#

# L: 127.0.0.1 567 dummy dummy 0100 000080



# syntax for add gbox connection

#

#G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>

#

# support optional limits just like C line (ignore shares more than 'uphops' away)

# { caid:id:)uphops), caid:id:)uphops), ... }

#

# example:

#

# G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500


######################################################################

# Other config settings #

######################################################################

# server shall listen on this port pro incoming connections

# default port is 12000, disable server with parm -s or set port 0

#

#SERVER LISTEN PORT : 12000


# server can give some info about server and client connections

# and cardinfo using telnet or webbrowser.

#

# Switch on/off access to info

# default is yes

#

#ALLOW TELNETINFO: no

#ALLOW WEBINFO: no


# Show extended client info when showing client list

# default is yes

#

#SHOW EXTENEDED CLIENT INFO : no


# The webinfo service can be protected with a username and password.

# This is switched off by default

#

#WEBINFO USERNAME : <username>

#WEBINFO PASSWORD : <password>


# The telnetinfo service can be protected with a username and password.

# This is switched off by default

#

#TELNETINFO USERNAME : <username>

#TELNETINFO PASSWORD : <password>


# default port for telnet is 16000

# default port for web is 16001

# supported commands:

# info

# activeclients

# clients

# servers

# shares

# providers

# entitlements

# example use:

# echo servers | telnet localhost 16000

# go with your browser to http://ip_CCcam_server:16001

#

#TELNETINFO LISTEN PORT : 16000

#WEBINFO LISTEN PORT : 16001


# time in seconds to keep On Screen Display active.

# default is 0 (turned off)

#

#ZAP OSD TIME : 3


# username used to show popup (default : root)

#OSD USERNAME : root


# password used to show popup (default : dreambox)

#OSD PASSWORD : dreambox


# port used to show popup (default : 80)

#OSD PORT : 80


# Serial reader config. Add as many as you have attached too your system

# replaces old name 'PHOENIX READER PATH', but still works.

# default is none

# optionally add readertype : phoenix,mouse,uniprog,sc8in1,smartreader+

# (when non readertype given defaults to uniprog (e.g. for mastera))

#

# SERIAL READER : <device> <type>

#

# example

#

#SERIAL READER : /dev/tts/0


# Serial reader smartcard write delay.

# Setting to finetune smartcard write speed, optimal setting depends on speed of system, and

# speed of card. Default value is calculated, but can overrule by setting.

# Use number of microseconds delay between bytes, 0 = no delay, -1 = calculated default

# Note: huge difference between values 0 and 1, because of schedular overhead

#

# SMARTCARD WRITE DELAY : <device> <delay>

#

# example, 10ms write delay on smartcard in reader attached to /dev/ttyUSB0

#

#SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000

#

# NOTE on sc8in1; because 8 smartcards are used on the same devicename, use

# devicename_0 .. devicename_7 for settings which require devicename to make

# settings per smartcard. example /dev/ttyS0_0, /dev/ttyS0_1 ..

# example, 8ms write delay between bytes to smartcard on last sc8in1 channel, attached to /dev/tts/0

#

#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000


# Smartcard clock speed override

# Setting override specified speed for smartcard.

# Don't add setting unless you're sure what you're doing.

# In 99% of the cases the reader selects the optimal speed.

# Adding this setting either slows your card down, or might destroy it.

#

# SMARTCARD CLOCK FREQUENCY : <device> <freq>

#

# example

#

#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000


# if timing should be shown in OSD and debug output

# default is no (turned off)

#

#SHOW TIMING : yes


# enables mini OSD which shows server(type), cardreader, keys or fta only

# default is no (turned off)

#

#MINI OSD : yes


# turns debugging on and off

# default is no (turned off)

#

#DEBUG : yes



# should CCcam try to read and parse newcamd.conf for server connections

# default is no (turned off)

#

#NEWCAMD CONF : yes



# configure what EMM blocker you want. Add as many as readers you have attached

# default is blocking nothing

#

# B: /dev/sci0 01

# 00 - nothing

# 01 - sa blocked

# 02 - ua blocked

# 04 - ga blocked

# and sum of for combinations

#

#examples

#

#B: /dev/tts/0 07

#B: /dev/sci0 01


# disable all EMM readers (clientside setting)

# saves lots of CPU, but you won't get any updates anymore

# (unless you get updates from your clients)

#

# default: no

#

#DISABLE EMM : yes


# control how to deal with global (ga) EMM readers (clientside setting)

# can avoid global (possibly noisy) emm being sent over the network

# shared and unique emm is not affected by this setting

# to block all emm, use DISABLE EMM setting instead

#

# 0 = ignore all global emm

# 1 = accept a small amount of global emm

# 2 = accept all global emm

#

# default: 2 (handle all global emm)

#

# example: seriously reduce the global emm traffic, but allow limited

# global emm when a smartcard does not work (possibly because it needs an update)

#

#GLOBAL EMM : 1


# with this setting you can

# allow a client on two hops away

# to send the updates to the cardserver

#

# default : no

#

#EXTRA EMM LEVEL : yes


# with this setting you can

# configure how many emm listeners are started.

# for example use 2 when recording

# and viewing different systems and both need constant updates

#

# default : 1

#

#EMM THREADS : 1


# overrule the nds boxkey (4 byte hex)

#

# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>

#

#example

#

#BOXKEY: /dev/sci0 00 11 22 33


# set card pin

# * please be very careful with this option as you could lock your card *

#

# PIN: <device> <pin>

#

#example

#

#PIN: /dev/sci0 1234


# overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88

#

# CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>

#

#example

#

#CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88


# overrule the irdeto camdata (64 byte hex)

# trailing zero bytes can be omitted

# default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults

#

# CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>

#

#example, when only the first 15 camdata bytes are nonzero

#

#CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff


# custom add id's for BEEF patched cards

#

# BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>

#

#example

#

#BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0


# what Softcam.Key should CCcam try to read

# defaults to /var/keys/SoftCam.Key

#

#SOFTKEY FILE : /var/keys/SoftCam.Key



# what AutoRoll.Key should CCcam try to read

# defaults to /var/keys/AutoRoll.Key

#

#AUTOROLL FILE : /var/keys/AutoRoll.Key



# what constant.cw should CCcam try to read

# defaults to /var/keys/constant.cw

# file content can be like

#

# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)

#

#STATIC CW FILE : /var/keys/constant.cw



# in this file you can configure what CAIDs CCcam should prefer or ignore

# defaults to /var/etc/CCcam.prio

# file content can have ignores (I) and prio lists (P)

#

# note 1: I line affects both for ecm and emm (receive no emm on ignored systems)

# P line only affects ecm choice (emm still received for all available systems, not just the priority system)

#

# note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.

#

# note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the

# prio lists are checked. In that case, matching is done on caid only, even if the P line

# defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line

# I lines work differently, they are checked two times, once before ecm or emm is received, again

# after ecm or emm are received (and nagra ident should be known)

# P lines are only checked once, before ecm received.

#

# note 4: if a P line contains caid:ident pairs which are not available for the current

# channel, that P line is not used for that channel.

# Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,

# because channel doesn't have 100:96.

# But P line with "1801" works, and also "626,1801" will work for channel

#

# note 5: P lines are parsed in the order in which they are found in the prio file.

# Only the first matching P line is used

#

# situation 1: ignore allways this caid, all idents, on all channels

# I: caid

#

# situation 2: ignore allways this caid/ident pair

# I: caid:ident

#

# situation 3: ignore this caid/ident pair, on channel 'sid'

# I: caid:ident:sid

#

# situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2

# P: caid1, caid2

#

# situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.

# P: caid1:ident1, caid2:ident2, .., caidN:identN

#

# situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.

# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.

# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN

#

#CAID PRIO FILE : /var/etc/CCcam.prio


#

# In this file all provider idents are defined

# The info from this file is being used in the web interface

# format:

# <caid><ident> "Provider description"

#

# PROVIDERINFO FILE : /var/etc/CCcam.providers


#

# In this file all channel idents are defined

# The info from this file is being used in the web interface

# format:

# caid:ident:sid "Channel description"

#

# CHANNELINFO FILE : /var/etc/CCcam.channelinfo


# write wrong logins to file

# defaults is off

#

#LOG WARNINGS : /tmp/warnings.txt


# global setting for stealthy login to newcamd/newcs server, N line can overrule

# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic

# default: 0

#

#NEWCAMD STEALTH : 0


# load balancing between identical cards, list device names of card readers containing identical cards,

# optionally followed by a list of service id's which are to be excluded from loadbalancing

#

# LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }

#

# multiple loadbalance groups can be configured, by adding multiple lines

# warning: restart is required, when loadbalance group config changes

#

#example 1: load balance requests for three identical cards

#

# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2

#

#example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available

#on one of the cards, so requests for these sids shouldn't be loadbalanced

#

# LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }


# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients

# in version 1.4.0 network load was significantly reduced

# in version 1.7.0 dangerous password bug was fixed

# in order to take advantage of these fixes, all clients should upgrade

# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in

#

# default : accept all versions

#

#example 1: avoid disconnecting clients problem

#

#MINIMUM CLIENT VERSION : 1.3.0

#

#example 2: achieve network load decrease

#

#MINIMUM CLIENT VERSION : 2.2.0

#

#example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)

#

#MINIMUM CLIENT VERSION : 1.7.0



# Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.

# Default, only chids advertised by card are accepted.

# This avoids a lot of unwanted card traffic

#

# But if smartcard has hidden/unknown chids, all chids should be tried.

# In that case specify 'TRY ALL CHIDS' option for cardreader.

# Use with care, enabling option causes more card traffic.

# Only use setting when some channels in your subscription don't work without it.

# note: if even this setting don't help decode all channels, try using

# commandline arg -l, to disable all self-learning features (warning: slower)

#

#TRY ALL CHIDS : <device>

#

#example: card in /dev/ttyUSB0 gets ecm for all possible chids, not

#just the chids it officially supports

#

#TRY ALL CHIDS : /dev/ttyUSB0


# perform smartcard post init commands

#

# POSTINIT : <device> <filename> (<autodelete>)

#

# send commands in 'filename' to 'device', and delete 'filename' when

# optional 'autodelete' argument nonzero

#

#example:

#

#POSTINIT : /dev/sci0 /tmp/postinit

#

#example /tmp/postinit contents:

#c134000003000000

#c13201000a


# Option to override autodetected dvb api version. Restart needed.

#

#DVB API: <value>

#

# <value> -1 = no dvb, 1 = dvb api 1, 3 = dvb api 3

#

# WARNING: only use when autodetect fails!

#

#example, disable nonworking dvb hardware:

#DVB API: -1


# Option to set global share limits

#

#GLOBAL LIMITS: { caid:id:)downhops), caid:id:)downhops), ... }

#

#example:

#

#GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }

#

# all users get no 0100:000080.

# and our 0622:000000 cards only for themself (1 hop down),

# and 0500 cards for themself plus one additional hop down.

# global limits are overridden by client specific limits (see F:)


# Option to reject shares with less than required downhops on clientside

#

#MINIMUM DOWNHOPS: <value>

#

# default: 0 (don't ignore any shares)

#

#example:

#

#MINIMUM DOWNHOPS: 1

#

# ignore shares that have less than 1 'downhops' (i.e. can not be shared

# further down to other clients)


# Option to ignore all shares that go through a certain node

#

#IGNORE NODE: <nodeid>

#

#example, ignore two nodes:

#

#IGNORE NODE: ccd536ab515767ad

#IGNORE NODE: aad536ab515761af



# The seca handler is used to better support simulcrypt on the same ident

#

# With this setting you can change the behaviour of how SECA has to be used

# This setting is ignored unless SECA2/SECA3 simulcrypt is detected!!

#

# When disabled CCcam behaves like previous versions

#

# When "prefer SECA3 over SECA2" is enabled try to use SECA3 ecm first, then SECA2

#

# When "Ignore SECA2" is enabled, ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle

#

# When "Ignore SECA3" is enabled, ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle

#

#

# The following settings can be used

#

# SECA HANDLER: <value>

# <value> : 0 = disabled, 1 = prefer SECA3 over SECA2, 2 = prefer SECA2 over SECA3, 3 = Ignore SECA2, 4 = Ignore SECA3

#

# default: 1

#

# Example try to use SECA3 ecm first, then SECA2

#SECA HANDLER: 1

#

# Example try to use SECA2 ecm first, then SECA3

#SECA HANDLER: 2

#

# Example to ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle

#SECA HANDLER: 3

#

# Example to ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle

#SECA HANDLER: 4



# Configure limited list of accepted sids for smartcard

# When omitted, all sids are allowed.

# Can work together with LOADBALANCE configuration (sids which are not allowed will be automatically left out of the loadbalance)

#

# SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }

#

# <device> is the reader devicenode

# <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)

# { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids

#

# when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>

# Check entitlement output for realtime assignment list

#

# WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect

#

#example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5

#

#SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }

#

#example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.

#

#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5

#

#example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned

#

#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }



# Configure list of sids which are not to be handled by smartcard

# When omitted, all sids are allowed (or SMARTCARD SID ASSIGN list is allowed, if available)

# Don't use together with (fixed) SMARTCARD SID ASSIGN list; use one or the other, depending on which gives the shortest list

# Can work together with dynamic SMARTCARD SID ASSIGN list.

# Can work together with LOADBALANCE configuration (sids which are rejected will be automatically left out of the loadbalance)

#

#SMARTCARD SID REJECT: <device> { <sid1>, <sid2>, ... <sidn> }

#

# <device> is the reader devicenode

# { <sid1>..<sidn> } lists the sids that are to be rejected on the smartcard

#

#

#example1: smartcard in device /dev/ttyUSB0 should not handle requests for sids df3, df4, df5

#

#SMARTCARD SID REJECT: /dev/ttyUSB0 { 0df3,0df4,0df5 }


# Option to limit the number of sids active on a single smartcard within a given time period

#

# SID LIMIT: <device> <maxsids> <timelimit>

#

# example: handle max 4 different sids every 11 seconds

#

# SID LIMIT: /dev/sci0 4 11


# Option to overrule the number of sci devices to be opened

#

#SCIDEVICES: <number>

#

#example, don't open any sci devices

#

#SCIDEVICES: 0

#

#example, force 2 devices to be opened

#

#SCIDEVICES: 2

#

# When omitted, attempt to open an autodetected number of sci devices

# WARNING: restart is required before a new SCIDEVICES limit takes effect

# *Merry Christmas* from aff-board.com




Ich danke schon mal im Voraus für die bestimmt tolle Unterstützung

Viele Grüße
Örny
 

dodo83

Super-Moderator
Teammitglied
Registriert
3. Oktober 2008
Beiträge
34.083
Lösungen
1
Punkte Reaktionen
31.591
hi,
am Server in der oscam.conf ein Protocol einrichten
Code:
Bitte, Anmelden oder Registrieren Code-Inhalt anzeigen!
in der oscam.user einen Account für die 2-te Box
Code:
Bitte, Anmelden oder Registrieren Code-Inhalt anzeigen!

am Client in der CCcam.cfg alles raus und nur die Line stehen lassen
Code:
Bitte, Anmelden oder Registrieren Code-Inhalt anzeigen!
 
Registriert
2. November 2012
Beiträge
14.081
Punkte Reaktionen
12.790
@oerny1
Welches Protokoll nutzt der Share?
Um zu erweitern einfach einen weiteren Account in der User hinzufügen der vom Namen her vom ersten abweicht.
 
OP
O

oerny1

Ist gelegentlich hier
Registriert
22. Oktober 2012
Beiträge
44
Punkte Reaktionen
4
@dodo: Vielen Dank. Hat - nach Restart von Oscam und Client - sofort funktioniert. Meine Frau wird es Dir Danken!!!

@4gx35: Wenn alles richtig läuft, werd ich mich mal an Sicherungen und Updates machen. Bisher hab ich mich noch nicht so richtig getraut a la "never change a running system".

@filius00: Auch Dir vielein Dank
 
Registriert
18. Mai 2010
Beiträge
17.588
Punkte Reaktionen
5.158
offensichtlich läuft es aber jetzt schon nicht richtig,
freezer sollte es nicht geben, also mach die neue box zum server,
dann musst du auch nichts sichern, oscam configs mit meiner anleitung vergleichen oder übernehmen,
vielmehr kannst du das backup von der neuen box dann auf der alten verwenden
 

dodo83

Super-Moderator
Teammitglied
Registriert
3. Oktober 2008
Beiträge
34.083
Lösungen
1
Punkte Reaktionen
31.591
Meine Frau wird es Dir Danken!!!
:eek: .... da wird meine was dagegen haben :D

zu deinen Freezern ...
nimm mal die Raute vor weg
Code:
Bitte, Anmelden oder Registrieren Code-Inhalt anzeigen!
und starte neu, wird die Karte dann eingelesen?
mal auch mit 14 probieren und AUTOSPEED mal deaktivieren,
ansonsten mal hier ein log posten
 
OP
O

oerny1

Ist gelegentlich hier
Registriert
22. Oktober 2012
Beiträge
44
Punkte Reaktionen
4
Hallo zusammen,
ich brauch mal wieder Eure Profi-Hilfe.

Nachdem sich kürzlich meine XT9000 komplett aufgehängt hatte und nicht mehr booten lies, habe ich ein neues open atv-image aufgespielt
und auch ein aktuelleres Oscam r11392.

Ich habe versucht, die wichtigsten Parameter anzupassen, hab aber wohl was vergessen bzw. falsch gemacht:
Bisher hatte ich unter readers beim Untermenü "write EMM to v13" immer unten eine Logaufstellung, welche EMM geblockt wurden. Da hab ich dann
immer die vermeintlich passende ausgewählt und wenn es nötig war als Verlängerer geschrieben.

Jetzt ist es wieder soweit - die Entitlements laufen morgen ab. Leider gibts das Log nicht mehr. Ist das jetzt woanders oder hab ich was falsch eingestellt?

Hier mal die files

Oscam Version
Unix starttime: 1533416827
Starttime: 04.08.2018 23:07:07
Version: oscam-1.20-unstable_svn-r11392
Compiler: mipsel-unknown-linux-gnu
Box type: et9200 (generic)
PID: 589
TempDir: /tmp/.oscam
ConfigDir: /usr/keys/
WebifPort: 8888

GBox tmp_dir: not defined using: /tmp/.oscam
value read during start up, not refreshed if changed later in webif!

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes


Oscam conf
[global]
logfile = /var/log/oscam.log
clienttimeout = 9000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

[cccam]
port = 12345
version = 2.3.0
reshare = 0

Oscam user
[account]
description = dvbapi
user = linuxsatsupport
group = 1

[account]
user = schlaf
pwd = zimmer
uniq = 3
au = 0
group = 1,2

Oscam server

[reader]
label = v13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
#ins7e11 = 15
mhz = 357
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Braucht Ihr sonst noch was oder reicht das, um mir zu helfen, die eingehenden EMM zu finden?

Danke schon mal
 

Verdi-Fan

Moderator
Teammitglied
Registriert
3. Oktober 2010
Beiträge
4.434
Punkte Reaktionen
12.659
Schalte mal auf Sky Krimi und gehe dann auf das WebIF deiner Box. Da sollte noch ein Verlängerer kommen - bis 2.00 Uhr wird da auch nichts dunkel.

IP deiner Box
192.123.123.12:8888 (und den Port nehmen, den du oben definiert hast 8888)

Sonst musst du die Datei V13_unique_emm.log oder irgendwas mit *unique_emm.log im Verzeichnis händisch suchen.
 
Zuletzt bearbeitet:
OP
O

oerny1

Ist gelegentlich hier
Registriert
22. Oktober 2012
Beiträge
44
Punkte Reaktionen
4
Im WebIf bin ich. Find ich das EMM dann im Lifelog? oder sind die Einstellungen jtétzt so angepasst, daß sie wieder wie früher in dem Untermenü angezeigt, wo ich sie dann auch final auf die Karte schreibe (readers - write EMM to v13).

Ich warte jetzt einfach mal ab
 
Oben