AW: Wassertstand zum Thema Timebomb Vu+Solo2
Konntest du dann auf die neuste VTI Version updaten ohne Timebomb?
Nachdem meine Chips endlich mal eingetroffen sind und eingelötet sind (Toshiba NAND in Lonrisun Box) häng ich hier mal ein ein komplettes Bootlog an.
Das hatte hier bisher gefehlt. Ich glaube DaggyDuck wollte das mal haben.
Code:=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.05.13 11:52:28 =~=~=~=~=~=~=~=~=~=~=~= BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42 2012 Vuplus team Copyright (C) Broadcom Corporation. !!!!! UNC read error occurred, while reading from NAND flash !!!!! UNC read error occurred, while reading from NAND flash CPU speed: 1305MHz Total memory(0): 1024MB DDR Freq: 800 MHz DDR Mode: DDR3 DEV TECH: 2048MBIT DDR Width: 32 Boot Device: NAND Total flash: 256MB Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub Saving shmoo values... Saved shmoo values.... CFE initialized. waiting for usb...done checking usb No Priority Usb checking front key readFrontKey 0 0 Checking usbdisk0:/vuplus/solo2/ignore.update......NO Checking usbdisk0:/vuplus/solo2/force.update......NO Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......NO ....NO Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......NO Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......NO Starting splash screen. Found splash image - Width = 720 Height = 480 Non Interlaced Replace list 009f8100 0c800000Interlaced Replace list 009f86a0 0c8005a0 Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M Loading: 0x80001000/6940160 0x8069f600/118992 Entry address is 0x80522e50 Starting program at 0x80522e50 Linux version 3.3.8-2.0 (amedeo@meo-fisso) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Mon Sep 9 11:20:37 CEST 2013 Fetching vars from bootloader... found 16 vars. Options: moca=0 sata=1 pcie=0 usb=1 Using 1024 MB + 0 MB RAM (from CFE) bootconsole [early0] enabled CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) memory: 30000000 @ 20000000 (usable) bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000) bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000) Zone PFN ranges: Normal 0x00000000 -> 0x00050000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 -> 0x00010000 0: 0x00020000 -> 0x00050000 PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584 Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. Memory: 571796k/1048576k available (5349k kernel code, 476780k reserved, 1244k data, 184k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:160 Measuring MIPS counter frequency... Detected MIPS clock frequency: 1305 MHz (163.125 MHz counter) Calibrating delay loop... 869.37 BogoMIPS (lpj=434688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 SMP: Booting CPU1... CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. SMP: CPU1 is running Brought up 2 CPUs devtmpfs: initialized NET: Registered protocol family 16 USB0: power enable is active high; overcurrent is active low USB1: power enable is active high; overcurrent is active low bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource wktmr NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Registering unionfs 2.5.11 (for 3.3.0-rc3) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.30 [Flags: R/W]. msgmni has been set to 1116 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A loop: module loaded ahci: SSS flag set, parallel bus scan disabled ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci strict-ahci.0: flags: ncq sntf stag clo slum part scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41 ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41 brcmstb_nand: NAND controller driver is loaded Found PHY at Address 3 Config GPHY through MDIO ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) No PHY detected, not registering interface:1 bcmgenet: probe of bcmgenet.1 failed with error -5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-brcm ehci-brcm.2: Broadcom STB EHCI ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300 ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ehci-brcm ehci-brcm.3: Broadcom STB EHCI ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500 ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600 hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected ohci-brcm ohci-brcm.2: Broadcom STB OHCI ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400 hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected ohci-brcm ohci-brcm.3: Broadcom STB OHCI ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600 hub 8-0:1.0: USB hub found hub 8-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care. Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): 3151d14aa6e983aa36d51a80d0477859f9ba12af [media] media: remove __dev* annotations 978ae2247fac3b330ecd1095823001d2c08c7efd [media] extract_xc3028.pl: fix permissions 73ec66c000e9816806c7380ca3420f4e0638c40e [media] stv0900: Multistream support IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR SANYO protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized Success! Registering the characther device success with 0 blackhole initialised sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers PM: CP0 COUNT/COMPARE frequency does not depend on divisor EBI CS0: setting up NAND flash (primary) NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit) brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC Bad block table found at page 131008, version 0x04 Bad block table found at page 130944, version 0x04 nand_read_bbt: bad block at 0x000000700000 nand_read_bbt: bad block at 0x000001aa0000 nand_read_bbt: bad block at 0x0000030c0000 nand_read_bbt: bad block at 0x000006b40000 nand_read_bbt: bad block at 0x000007fe0000 nand_read_bbt: bad block at 0x00000a780000 nand_read_bbt: bad block at 0x00000bfa0000 nand_read_bbt: bad block at 0x00000c260000 nand_read_bbt: bad block at 0x00000de80000 nand_read_bbt: bad block at 0x00000e4e0000 Creating 4 MTD partitions on "brcmnand.0": 0x000001f00000-0x000010000000 : "rootfs" 0x000001f00000-0x000010000000 : "rootfs(redundant)" 0x000000200000-0x000000900000 : "kernel" 0x000000900000-0x000000a00000 : "mac" UBI: attaching mtd0 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: max. sequence number: 677 UBI: attached mtd0 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 225 MiB UBI: number of good PEBs: 1788 UBI: number of bad PEBs: 12 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1788 UBI: number of PEBs reserved for bad PEB handling: 17 UBI: max/mean erase counter: 247/9 UBI: image sequence number: 1567225952 UBI: background thread "ubi_bgt0d" started, PID 45 UBIFS: parse sync UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 222969856 bytes (217744 KiB, 212 MiB, 1756 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:14. devtmpfs: mounted Freeing unused kernel memory: 184k freed INIT: version 2.88 booting NET: Registered protocol family 10 procmk_init dvb_bcm7356: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint DVB: registering new adapter (vusolo2) bcm7356: hotplug_callback(): Hotplug - status.connected 0:0 [GP]:brcm_pwm_init brcm_demux_init: $Id: bcm_demux.c,v 0.7 $ [VID]: <6>bcm7335_video_init [AUD]: <6>bcm7335_audio_init DVB: registering adapter 0 frontend 0 (BCM7346 FE)... DVB: registering adapter 0 frontend 0 (BCM7346 FE)... [MPVR]: >> misc_pvr_init BKNI_P_GetTrackAllocEntry_resize: resizing from 4096->8192 BKNI_Malloc(linuxkernel) top users: blocks, bytes, filename:line 694, 33312, magnum/portinginterface/vdc/7346/bvdc_bufferheap_priv.c:737 572, 128656, ../BSEAV/lib/utils/balloc.c:35 536, 21440, ../magnum/basemodules/mem/bmem_system.c:286 365, 43800, magnum/commonutils/mrc/7346/bmrc_monitor.c:940 input: dreambox advanced remote control (native) as /devices/virtual/input/input0 [LCD]: registered [CI]: registered ci0 [DFP]: registered dbox fp [DFP]: Scart 9597 is found 4 [SC]: registered sci0 [SC]: registered sci1 system_time_set wakeup mode get system_time_set wakeup mode get 0xc4 fpga update driver loaded Startting the hotplug events dispatcher udevd (113): /proc/113/oom_adj is deprecated, please use /proc/113/oom_score_adj instead. Synthesizing the initial hotplug events Waiting for /dev to be fully populated udevd-event[208]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory done Displaying bootlogo. [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 Configuring network interfaces... [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.19.4) started Sending discover... Sending discover... Sending discover... No lease, forking to background netlink: 33 bytes leftover after parsing attributes. netlink: 33 bytes leftover after parsing attributes. netlink: 33 bytes leftover after parsing attributes. done. Starting portmap daemon... net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 vm.min_free_kbytes = 16384crond[564]: crond: crond (busybox 1.19.4) started, log level 8 INIT: Entering runlevel: 3 Starting system message bus: dbus. Starting Dropbear SSH server: dropbear. Starting automounter: done. [SCRIPT] start: CCcam_2.2.1 Starting internet superserver: inetd. Starting portmap daemon... creating NFS state directory: done starting 8 nfsd kernel threads: svc: failed to register lockdv1 RPC service (errno 124). done starting mountd: done starting statd: done exportfs: /media/hdd does not support NFS export exportfs: No host name given with /media/hdd (rw,async,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534), suggest *(rw,async,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534) to avoid warning Starting syslogd/klogd: done UsbTuner v0.3.12 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting virtual private network daemon: Autostart disabled. starting Busybox Periodic Command Scheduler: crond... /usr/sbin/crond is already running 564 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 setenv('prefix', '/usr', 0) setenv('exec_prefix', '/usr', 0) setenv('bindir', '/usr/bin', 0) setenv('sbindir', '/usr/sbin', 0) setenv('libexecdir', '/usr/libexec', 0) setenv('datarootdir', '${prefix}/share', 0) setenv('datadir', '/usr/share', 0) setenv('sysconfdir', '/etc', 0) setenv('sharedstatedir', '/com', 0) setenv('localstatedir', '/var', 0) setenv('libdir', '/usr/lib', 0) setenv('localedir', '${datarootdir}/locale', 0) setenv('prefix', '/usr', 1) setenv('exec_prefix', '/usr', 1) setenv('bindir', '/usr/bin', 1) setenv('sbindir', '/usr/sbin', 1) setenv('libexecdir', '/usr/libexec', 1) setenv('datarootdir', '/usr/share', 1) setenv('datadir', '/usr/share', 1) setenv('sysconfdir', '/etc', 1) setenv('sharedstatedir', '/com', 1) setenv('localstatedir', '/var', 1) setenv('libdir', '/usr/lib', 1) setenv('localedir', '/usr/share/locale', 1) resolve: resolve ${datadir}/enigma2/encoding.conf resolve: -> /usr/share/enigma2/encoding.conf resolve: resolve ${libdir}/enigma2/python resolve: -> /usr/lib/enigma2/python PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (8) graphics acceleration manager + (9) GFBDC 12150k video mem - double buffering available! 4050kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride[LCD]: unknown cmd 0x1015 : 5760) + (9) gLCDDC found OLED display! lcd buffer 0x6d1c10 8448 bytes, stride 132 + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) Hdmi CEC driver + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver + (21) input device driver Input device "dreambox advanced[CI]: CI interface initialised remote control (native)" is not a keyboard. Found 1 input devices! + (21) Console RC Driver failed to open /dev/tty0 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. CI Slot 0 setSource(0) eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 1 common interface slots + (40) eServiceCenter settings instance. + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 resolve: resolve ${sysconfdir}/enigma2/lamedb resolve: -> /etc/enigma2/lamedb ---- opening lame channel db reading services (version 4) loaded 21 services scanning for frontends.. opening frontend 0 detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported opening frontend 1 detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 1 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 4 enigma2 is the main pvr application... adjust oom score! RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) resolve: resolve ${datadir}/enigma2/skin_default/pal.png resolve: -> /usr/share/enigma2/skin_default/pal.png Loading spinners... resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png found 8 spinner! executing main setIoPrio best-effort level 3 ok resolve: resolve ${libdir}/enigma2/python/mytest.py resolve: -> /usr/lib/enigma2/python/mytest.py resolve: resolve ${sysconfdir}/ resolve: -> /etc/ resolve: resolve ${sysconfdir}/ resolve: -> /etc/ resolve: resolve ${datadir}/fonts/ resolve: -> /usr/share/fonts/ resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ resolve: resolve ${libdir}/enigma2/python/Plugins/ resolve: -> /usr/lib/enigma2/python/Plugins/ resolve: resolve ${datadir}/enigma2/po/ resolve: -> /usr/share/enigma2/po/ resolve: resolve ${datadir}/enigma2/ resolve: -> /usr/share/enigma2/ resolve: resolve ${datadir}/enigma2/ resolve: -> /usr/share/enigma2/ resolve: resolve ${sysconfdir}/enigma2/playlist/ resolve: -> /etc/enigma2/playlist/ resolve: resolve ${datadir}/enigma2/defaults/ resolve: -> /usr/share/enigma2/defaults/ resolve: resolve ${datadir}/enigma2/dealer resolve: -> /usr/share/enigma2/dealer resolve: resolve ${datadir}/meta resolve: -> /usr/share/meta resolve: resolve ${datadir}/enigma2/defaults/ resolve: -> /usr/share/enigma2/defaults/ enumerating block devices... found block device 'loop0': blacklisted found block device 'loop1': blacklisted found block device 'loop2': blacklisted found block device 'loop3': blacklisted found block device 'loop4': blacklisted found block device 'loop5': blacklisted found block device 'loop6': blacklisted found block device 'loop7': blacklisted found block device 'mtdblock0': blacklisted found block device 'mtdblock1': blacklisted found block device 'mtdblock2': blacklisted found block device 'mtdblock3': blacklisted found block device 'mtdblock4': blacklisted not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml' Preferred tag editor set to None Reading satellites.xml main thread is non-idle! display spinner! resolve: resolve ${datadir}/enigma2/unicable.xml resolve: -> /usr/share/enigma2/unicable.xml removing internal link on frontend id 0 sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No slot: 0 configmode: advanced add 192 to 1 add 200 to 2 slot: 1 configmode: advanced add 215 to 3 add 233 to 4 sec config completed resolve: resolve ${datadir}/enigma2/setup.xml resolve: -> /usr/share/enigma2/setup.xml resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/bouquets.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.favourites.tv 12 entries in Bouquet userbouquet.favourites.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 7 entries in Bouquet userbouquet.dbe00.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 4 entries in Bouquet userbouquet.dbe01.tv 3 entries in Bouquet bouquets.tv resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/bouquets.radio resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ loading bouquet... /etc/enigma2/userbouquet.favourites.radio 0 entries in Bouquet userbouquet.favourites.radio 1 entries in Bouquet bouquets.radio [eDVBLocalTimeHandler] enable sync local time with transponder time! add dreampackage scanner plugin added main thread is non-idle! display spinner! [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > cannot open /proc/stb/avs/0/input_choices --> setting scaler_sharpness to: 0000000D couldn't open /proc/stb/misc/12V_output resolve: resolve ${datadir}/enigma2/keymap.xml resolve: -> /usr/share/enigma2/keymap.xml [ePopen] command: ip -o addr show dev eth0 setLCDBrightness 25 setLCDBrightness 127 resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/share/keymaps/ resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/share/keymaps/ resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/share/keymaps/ Activating keymap: Keyboard English resolve: resolve ${datadir}/keymaps/ resolve: -> /usr/share/keymaps/ [ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap Activating language English language set to en_EN FIXME: request for unknown slot FIXME: request for unknown slot FIXME: request for unknown slot [RemoteChannelStreamConverter] fallback to default translation for Remote channel stream converter [RemoteChannelStreamConverter] fallback to default translation for Convert remote channel list for streaming resolve: resolve ${datadir}/enigma2/setup.xml resolve: -> /usr/share/enigma2/setup.xml resolve: resolve ${libdir} resolve: -> /usr/lib [MyTube] MyTubePlayerService - init [MeoBoot] set language to en [MeoBoot] set language to en [MeoBoot] fallback to default translation for E2 Light Multiboot [TranscodingSetup] set port 8002 Restarting internet superserver: inetd . <ZappingModeSelection> set zapping mode : mute resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ resolve: resolve ${sysconfdir}/enigma2/ resolve: -> /etc/enigma2/ [CrossEPG] set language to en --> setting contrast to: 00008000 --> setting saturation to: 00008000 --> setting hue to: 00008000 --> setting brightness to: 00008000 --> setting block_noise_reduction to: 00000000 --> setting mosquito_noise_reduction to: 00000000 --> setting digital_contour_removal to: 00000000 --> setting splitmode to: off --> setting sharpness to: 00000000 --> setting auto_flesh to: 00000000 --> setting green_boost to: 00000000 --> setting blue_boost to: 00000000 --> setting dynamic_contrast to: 00000000 --> applying pep values [AutoShutDown] set language to en [AutoShutDown] set language to en [AutoShutDown] fallback to default Enigma2 Translation for Standby [AutoShutDown] fallback to default Enigma2 Translation for Deepstandby [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown <RemoteControlCode> Write Remote Control Code : 2 remove DVI-PC because it does not exist. hotplug on DVI set Videomode DVI 1080p multi set aspect, policy, policy2, wss 16:9 panscan letterbox auto resolve: resolve ${datadir}/enigma2/ resolve: -> /usr/share/enigma2/ [Softcam] Started restarting enigma dreambox [CI_Assignment] activating ci configs: [CI_Activate] FOUND 1 CI Slots resolve: resolve ${sysconfdir}/enigma2/ci resolve: -> /etc/enigma2/ci [CI_Activate_Config_CI0] no config file found [CI_Activate_Config_CI0] error parsing xml... starting BlackHoleapi handler starting hotplug handler It's now Thu Jan 1 01:00:29 1970 [timer.py] next activation: 129 (in 99974 ms) It's now Thu Jan 1 01:00:29 1970 [timer.py] next activation: 129 (in 99911 ms) [AutoShutDown] start.... Looking for embedded skin port changed to DVI mode changed to 1080p default ('1080p', 'default') preferedmodes ['720p', '1080i', '576p', '480p', '576i', '480i', ('1080p', 'default')] [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat' not showing fine-tuning wizard, config variable doesn't exist showtestcard is false Looking for embedded skin setValue[AUD]: AUDIO_SET_MUTE 0 65 Setvolume: 100 1[AUD]: AUDIO_SET_MIXER -854483480 00 (raw) Setvol[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 ume: 0 0 (-1db) [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 Setvolume: 65 65[AUD]: AUDIO_SET_MIXER -854483480 (raw) Setvolum[AUD]: AUDIO_SET_MIXER : amixl 23, amixr 23 e: 23 23 (-1db) [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [AUD]: AUDIO_SET_MIXER : next left volume -1712, right volume -1712 allocating new converter! reused converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! resolve: resolve ${datadir}/enigma2/%s/ resolve: -> /usr/share/enigma2/%s/ allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! allocating new converter! reused converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! RemovePopup, id = ZapError reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! allocating new converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! reused converter! warning, skin is missing element Universe in <class 'Screens.InfoBar.InfoBar'> reused converter! reused converter! allocating new converter! allocating new converter! allocating new converter! allocating new converter! playing service.. not pauseable. RemovePopup, id = ZapError allocate channel.. 0000:0000 opening frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported [eDVBCAService] new channel 0x7520e6b8! (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12690000 Pol 0 SR 43200000 INV 2 FEC 0 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1390 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:3EE:0:0:C03192:0:0:0: allocate demux resolve: resolve ${sysconfdir}/scan_tp_valid_check.py resolve: -> /etc/scan_tp_valid_check.py [SEC] set static current limiting set sequence pos 3 set sequence pos 4 [SEC] setVoltage 2 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported [SEC] sleep 200ms child has terminated pipes closed child has terminated pipes closed [ePopen] command: route -n | grep eth0 poll: unhandled POLLERR/HUP/NVAL for fd 27(16) poll: unhandled POLLERR/HUP/NVAL for fd 29(17) child has terminated pipes closed nameservers: [[202, 96, 128, 166], [202, 96, 134, 133]] read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:1d:ec:00:07:ae', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}} AT plugin not found ER plugin not found resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src [OpenWebif] loading external plugins... [OpenWebif] no plugins to load [OpenWebif] started on 80 [OpenWebif] started on 443 poll: unhandled POLLERR/HUP/NVAL for fd 28(16) [SEC] invalidate current switch params [SEC] sendDiseqc: e00000(DiSEqC reset) [SEC] sleep 50ms [SEC] sendDiseqc: e00003(DiSEqC peripherial power on) [SEC] sleep 150ms [SEC] sendDiseqc: e01038f3 [SEC] sleep 50ms set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] update curFE tune rent switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 [SEC] sleep 500ms (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 7, inversion off, m_tuning 2 [SEC] set dynamic current limiting FE tune OURSTATE: lost lock, trying to retune (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12690000 Pol 0 SR 43200000 INV 2 FEC 0 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1390 mhz OURSTATE: tuning [SEC] set static current limiting [SEC] setTone 0 [SEC] sleep 25ms set sequence pos 7 [SEC] invalidate current switch params [SEC] sendDiseqc: e00000(DiSEqC reset) [SEC] sleep 50ms [SEC] sendDiseqc: e00003(DiSEqC peripherial power on) [SEC] sleep 150ms [SEC] sendDiseqc: e01038f3 [SEC] sleep 50ms set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 [SEC] sleep 500ms (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 7, inversion off, m_tuning 2 [SEC] set dynamic current limiting FE tune FE tune OURSTATE: lost lock, trying to retune (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12690000 Pol 0 SR 43200000 INV 2 FEC 0 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1390 mhz OURSTATE: tuning [SEC] set static current limiting [SEC] setTone 0 [SEC] sleep 25ms set sequence pos 7 [SEC] invalidate current switch params [SEC] sendDiseqc: e00000(DiSEqC reset) [SEC] sleep 50ms [SEC] sendDiseqc: e00003(DiSEqC peripherial power on) [SEC] sleep 150ms [SEC] sendDiseqc: e01038f3 [SEC] sleep 50ms set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 [SEC] sleep 500ms (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 7, inversion off, m_tuning 2 [SEC] set dynamic current limiting ð
Edit: Update: Die Update.exe vom 08.05 (V3) läuft durch allerdings eben nicht! mit dem beigelegten (3 Pin beschaltetem) seriellen Kabel, sondern
mit einem Nullmodemkabel (standard,voll belegt gekreuzte Beschaltung) ich denke deswegen gings bei einigen nicht bisher....
Zuletzt bearbeitet von einem Moderator:
