DM 920 aber wie.

[Alex]

Der Reader wird mit device = /dev/sci0 angesprochen.
Wie sieht das Log aus?

 

[Haraldo12]

habe es mit sci1 probiert geht auch nicht

hier die Log

Spoiler: oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 18:45:50 2018
-------------------------------------------------------------------------------
2018/01/18 18:45:50 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 18:45:50 00000000 s (main) System name = Linux
2018/01/18 18:45:50 00000000 s (main) Host name = dm920
2018/01/18 18:45:50 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 18:45:50 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 18:45:50 00000000 s (main) Machine = armv7l
2018/01/18 18:45:50 00000000 s (main) Stb model = dm920
2018/01/18 18:45:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 28572
2018/01/18 18:45:50 00000000 s (emu) OSCam-Emu version 739
2018/01/18 18:45:50 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 18:45:50 00000000 s (main) signal handling initialized
2018/01/18 18:45:50 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 18:45:50 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 18:45:50 00000000 s (main) waiting for local card init
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /var/keys
2018/01/18 18:45:50 5C7BA837 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 18:45:50 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 18:45:50 3B257B9A h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 18:45:50 3B257B9A h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 18:45:51 5C7BA837 r (reader) emulator [emu] card detected
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] found card system emu
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /var/keys

 

[supraracer]

Log zu kurz.
HowTo - Wie Poste ich im OScam Bereich richtig

-supraracer

 

[ultima]

device = /dev/sci0 ist richtig. Karte mit Chip nach oben. Oscam auch neu gestartet.
oscam.config, oscam.server und oscam.user werden immer gebraucht, somit auch diese drei Dateien immer posten.

 

[Haraldo12]

OK hier noch einmal komplett:

Spoiler: Oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 18:45:50 2018
-------------------------------------------------------------------------------
2018/01/18 18:45:50 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 18:45:50 00000000 s (main) System name = Linux
2018/01/18 18:45:50 00000000 s (main) Host name = dm920
2018/01/18 18:45:50 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 18:45:50 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 18:45:50 00000000 s (main) Machine = armv7l
2018/01/18 18:45:50 00000000 s (main) Stb model = dm920
2018/01/18 18:45:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 28572
2018/01/18 18:45:50 00000000 s (emu) OSCam-Emu version 739
2018/01/18 18:45:50 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 18:45:50 00000000 s (main) signal handling initialized
2018/01/18 18:45:50 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 18:45:50 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 18:45:50 00000000 s (main) waiting for local card init
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /var/keys
2018/01/18 18:45:50 5C7BA837 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 18:45:50 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 18:45:50 3B257B9A h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 18:45:50 3B257B9A h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 18:45:51 5C7BA837 r (reader) emulator [emu] card detected
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] found card system emu
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /var/keys

mehr ist da nicht drin

Spoiler: Oscam.server

[ reader]
label = reader1_sky_v13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
group = 1
emmcache = 1,3,2
blockemm-u = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Spoiler: Oscam.conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 256
suppresscmd08 = 1

[cs378x]
port = 15000

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 83
httpuser = admin
httpowd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

Spoiler: Oscam.user

[account]
user = local
au = 1
group = 1

[account]
user = wohnzimmer
pwd = wohnzimmer
group = 1

[account]
user = erdgeschoss
pwd = erdgeschoss
group = 1

ich glaube das ist alles

 

[supraracer]

Und hier auch nochmal: Das Log ist zu kurz, man sieht ja nicht mal dass versucht wird die Karte zu lesen oder ein Sender angefragt wird.

-supraracer

 

[Haraldo12]

jetzt steht auf einmal mehr drin

Spoiler: oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 18:45:50 2018
-------------------------------------------------------------------------------
2018/01/18 18:45:50 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 18:45:50 00000000 s (main) System name = Linux
2018/01/18 18:45:50 00000000 s (main) Host name = dm920
2018/01/18 18:45:50 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 18:45:50 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 18:45:50 00000000 s (main) Machine = armv7l
2018/01/18 18:45:50 00000000 s (main) Stb model = dm920
2018/01/18 18:45:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 28572
2018/01/18 18:45:50 00000000 s (emu) OSCam-Emu version 739
2018/01/18 18:45:50 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 18:45:50 00000000 s (main) signal handling initialized
2018/01/18 18:45:50 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 18:45:50 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 18:45:50 00000000 s (main) waiting for local card init
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:50 5C7BA837 r (emu) Key file not found in: /var/keys
2018/01/18 18:45:50 5C7BA837 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 18:45:50 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 18:45:50 3B257B9A h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 18:45:50 3B257B9A h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 18:45:51 5C7BA837 r (reader) emulator [emu] card detected
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] found card system emu
2018/01/18 18:45:52 5C7BA837 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 18:45:52 5C7BA837 r (emu) Key file not found in: /var/keys
2018/01/18 19:22:56 3B257B9A h (webif) Restart requested by WebIF from 192.168.0.175
2018/01/18 19:22:56 3B257B9A h (main) restart oscam requested
2018/01/18 19:22:57 00000000 s (main) init for all local cards done
2018/01/18 19:22:57 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/01/18 19:22:57 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/01/18 19:22:57 00000000 s (anticasc) anti cascading disabled
2018/01/18 19:22:57 00000000 (emu) ERROR: accept() failed
2018/01/18 19:22:57 21416B43 c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2018/01/18 19:22:57 21416B43 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/01/18 19:22:57 21416B43 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/01/18 19:22:57 3B257B9A h (webif) HTTP Server stopped
2018/01/18 19:22:57 00000000 s (dvbapi) dvbapi channelcache saved to /etc/tuxbox/config/oscam.ccache
2018/01/18 19:22:57 00000000 s (emmcache) saving emmcache disabled since no reader is using it!
2018/01/18 19:22:57 00000000 s (emmcache) saving emmstats disabled since no reader is using it!
2018/01/18 19:22:57 00000000 s (client) killing client local
2018/01/18 19:22:57 00000000 s (reader) emulator [emu] Killing reader
2018/01/18 19:22:57 00000000 s (config) userdb 3 accounts freed
2018/01/18 19:22:57 00000000 s (config) readerdb 2 readers freed
2018/01/18 19:22:57 00000000 s (main) cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 19:22:57 2018
-------------------------------------------------------------------------------
2018/01/18 19:22:57 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 19:22:57 00000000 s (main) System name = Linux
2018/01/18 19:22:57 00000000 s (main) Host name = dm920
2018/01/18 19:22:57 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 19:22:57 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 19:22:57 00000000 s (main) Machine = armv7l
2018/01/18 19:22:57 00000000 s (main) Stb model = dm920
2018/01/18 19:22:57 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 30935
2018/01/18 19:22:57 00000000 s (emu) OSCam-Emu version 739
2018/01/18 19:22:57 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 19:22:57 00000000 s (main) signal handling initialized
2018/01/18 19:22:57 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 19:22:57 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 19:22:57 00000000 s (main) waiting for local card init
2018/01/18 19:22:57 4FA78857 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 19:22:57 4FA78857 r (emu) Key file not found in: /var/keys
2018/01/18 19:22:57 4FA78857 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 19:22:57 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 19:22:57 5C7BA837 h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 19:22:57 5C7BA837 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 19:22:58 4FA78857 r (reader) emulator [emu] card detected
2018/01/18 19:22:59 4FA78857 r (reader) emulator [emu] found card system emu
2018/01/18 19:22:59 4FA78857 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 19:23:00 4FA78857 r (emu) Key file not found in: /etc/tuxbox/config
2018/01/18 19:23:00 4FA78857 r (emu) Key file not found in: /var/keys

 

[dodo83]

im log ist kein Reader zu sehen, achte auf Leerzeichen

[ reader]

hinter der [ und vor dem reader ist eins .... somit würde OScam diesen auch nicht erkennen

 

[webman2]

Mal überprüfen, ob die Rechte für das Verzeichnis /etc/tuxbox/config richtig gesetzt sind.

Spoiler: oscam.server

[reader]
label = reader1_sky_v13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-u = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[Haraldo12]

das Leerzeichen habe ich rausgenommen box neu gestartet aber immer noch dunkel.
hier die log

Spoiler: Osacm.Log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 20:35:19 2018
-------------------------------------------------------------------------------
2018/01/18 20:35:19 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 20:35:19 00000000 s (main) System name = Linux
2018/01/18 20:35:19 00000000 s (main) Host name = dm920
2018/01/18 20:35:19 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 20:35:19 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 20:35:19 00000000 s (main) Machine = armv7l
2018/01/18 20:35:19 00000000 s (main) Stb model = dm920
2018/01/18 20:35:19 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 354
2018/01/18 20:35:19 00000000 s (emu) OSCam-Emu version 739
2018/01/18 20:35:19 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 20:35:19 00000000 s (main) signal handling initialized
2018/01/18 20:35:19 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 20:35:19 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 20:35:19 00000000 s (main) waiting for local card init
2018/01/18 20:35:19 3C0362AD h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 20:35:19 3C0362AD h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 20:35:19 024D047D r (emu) Key file not found in: /usr/keys
2018/01/18 20:35:19 024D047D r (emu) Key file not found in: /var/keys
2018/01/18 20:35:19 024D047D r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 20:35:19 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 20:35:20 024D047D r (reader) emulator [emu] card detected
2018/01/18 20:35:21 024D047D r (reader) emulator [emu] found card system emu
2018/01/18 20:35:21 024D047D r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 20:35:21 024D047D r (emu) Key file not found in: /usr/keys
2018/01/18 20:35:21 024D047D r (emu) Key file not found in: /var/keys

ich hab zu wenig erfahrung aber es siehrt so aus als wenn er den Reader erkennt aber ergreift nicht auf die Karte zu. Oder liege ich da falsch.

die Rechte für /etc/tuxbox/config stehen auf 644

 

[dodo83]

laut log wird immer noch kein Reader erkannt,
würde mal per OScam WebIF schauen ob dieser "drin" ist,
ansonsten per WebIF einen einrichten, somit sollte alles an "seinem Platz" hinkommen

 

[webman2]

Rechte für das Verzeichnis /etc/tuxbox/config auf 755 setzen.

 

[Haraldo12]

Danke für eure Geduld
Stück für Stück ändert sich was aber immer noch dunkel
hier die neue Log

Spoiler: Osacm.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jan 18 20:57:16 2018
-------------------------------------------------------------------------------
2018/01/18 20:57:16 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2018/01/18 20:57:16 00000000 s (main) System name = Linux
2018/01/18 20:57:16 00000000 s (main) Host name = dm920
2018/01/18 20:57:16 00000000 s (main) Release = 3.14-1.17-dm920
2018/01/18 20:57:16 00000000 s (main) Version = #1 SMP Wed Nov 15 13:02:43 CET 2017
2018/01/18 20:57:16 00000000 s (main) Machine = armv7l
2018/01/18 20:57:16 00000000 s (main) Stb model = dm920
2018/01/18 20:57:16 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 361
2018/01/18 20:57:16 00000000 s (emu) OSCam-Emu version 739
2018/01/18 20:57:16 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/01/18 20:57:16 00000000 s (main) signal handling initialized
2018/01/18 20:57:16 00000000 s (net) cs378x: initialized (fd=6, port=15000)
2018/01/18 20:57:16 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/01/18 20:57:16 00000000 s (main) waiting for local card init
2018/01/18 20:57:16 7BD0A145 r (emu) Key file not found in: /usr/keys
2018/01/18 20:57:16 7BD0A145 r (emu) Key file not found in: /var/keys
2018/01/18 20:57:16 7BD0A145 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/18 20:57:16 592DBE03 h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2018/01/18 20:57:16 592DBE03 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/01/18 20:57:16 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/01/18 20:57:17 7BD0A145 r (reader) emulator [emu] card detected
2018/01/18 20:57:18 7BD0A145 r (reader) emulator [emu] found card system emu
2018/01/18 20:57:18 7BD0A145 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/18 20:57:18 7BD0A145 r (emu) Key file not found in: /usr/keys
2018/01/18 20:57:18 7BD0A145 r (emu) Key file not found in: /var/keys
2018/01/18 20:57:18 00000000 s (main) init for all local cards done
2018/01/18 20:57:18 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/01/18 20:57:18 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/01/18 20:57:18 00000000 s (anticasc) anti cascading disabled
2018/01/18 20:57:18 7C869573 c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2018/01/18 20:57:18 7C869573 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam.ccache
2018/01/18 20:57:18 7C869573 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 stop descrambling program number 2B7A (FFFE@FFFFFE:2B7A unknown)
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B66 PROVID: 000000
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 098C ECM_PID: 1A66 PROVID: 000000
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1F66 PROVID: 000000
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098D ECM_PID: 1C66 PROVID: 000000
2018/01/18 20:58:43 7C869573 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/01/18 20:58:47 7C869573 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/01/18 20:59:00 7C869573 c (-) -- Skipped 2 duplicated log lines --
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 stop descrambling program number 000C (09C4@000000:000C unknown)
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B60 PROVID: 000000
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 098C ECM_PID: 1A60 PROVID: 000000
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1F60 PROVID: 000000
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098D ECM_PID: 1C60 PROVID: 000000
2018/01/18 20:59:00 7C869573 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/01/18 20:59:04 7C869573 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/01/18 20:59:11 7C869573 c (-) -- Skipped 1 duplicated log lines --
2018/01/18 20:59:11 7C869573 c (dvbapi) Demuxer 0 stop descrambling program number 0016 (09C4@000000:0016 unknown)

hier mal aus dem webif

 

[webman2]

Was für eine Oscam-Version ist denn das ?
Ist das noch das original Oscam binary vom feed ?
Das ist zu alt .... die musst Du erstmal updaten.

OE 2.5 Images - newnigma2-deb-daily-OE2.5-dm920-15_12_2017
mips-tuxbox-oe2.0 - oscam-svn11398-mipsoe20-webif-emu_v15_support

 

[Haraldo12]

das ist die vom Feed Oscam modern eine andere finde ich da nicht. wo bekomme ich eine neue her wenn nicht im feed bzw wo finde ich ein Update. Bin schon fast am verzweifeln wollte schon meine 8000er wieder aufbauen.