Tntsat + Oscam + Format von aeskeys

[reader]
label = tntsat
description = TNT SAT France0500:030B00
protocol = internal
device = /dev/sci0
readnano = all
cacheex_drop_csp = 1
cacheex_block_fakecws = 1
caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
detect = cd
mhz = 450
cardmhz = 2700
aeskeys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
group = 1
emmcache = 1,3,2,0
blockemm-bylen = 183,81
lb_weight = 300
disablecrccws = 1
deprecated = 1

[account]
user = tnt-sat
pwd = tnt-sat
caid = 0500
au = 1
emmreassembly = 1
group = 1
cacheex_drop_csp = 1
cacheex_block_fakecws = 1
disablecrccws = 1
deprecated = 1

[global]
logfile = /dev/null
clienttimeout = 6000
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
waitforcards_extra_delay = 0
preferlocalcards = 2
dropdups = 1
emmlogdir = /usr/keys/
lb_mode = 1
lb_save = 500
lb_nbest_readers = 2
lb_min_ecmcount = 2
lb_max_ecmcount = 2000
lb_retrylimit = 2800
lb_stat_cleanup = 1
lb_auto_betatunnel = 0
lb_auto_betatunnel_mode = 5
lb_auto_timeout_p = 20
ecmfmt = c/s/l/y
suppresscmd08 = 1

[cache]
delay = 10
max_time = 10
max_hit_time = 7
cwcycle_maxlist = 1000
cwcycle_keeptime = 30
cwcycle_allowbadfromffb = 1
cwcycle_usecwcfromce = 1

[cs378x]
port = xxxxxx
suppresscmd08 = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox

[reader]
label = tnt
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
cardmhz = 2700
mhz = 450
group = 1
emmcache = 1,3,2
aeskeys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
disablecrccws = 1
ident = 0500:030B00
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
P: 0500:030B00 1
[account]
user = tnt-sat
pwd = tnt-sat
au = 1
group = 1

[global]
nice = -1
logfile = stdout
cachedelay = 120
saveinithistory = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = tnt-sat

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 11 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
#V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# für externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# für externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
F: { 53 } 01 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1

# CAS settings (NEW)
#
#[generic]
#reset_rs232_buffer = 1 ; (default: 1) empty RS232 buffer before writing
#
#[slot-n] ; slot section with n=1..18
#include = /foo/slot.cfg ; looking for section parameters in user defined configuration file, only outside of a section defined parameters will be used
#initialization = basic ; (default: basic) [basic,extended] init card in basic or extended mode
#disable_pts = 0 ; (default: 0) enable/disable protocol type selection (PTS) handshake
#enable_ice = 0 ; (default: 0) enable/disable irdeto cryptoworks enveloped support
#enable_onionmode = 0 ; (default: 0) enable/disable irdeto/nagra aladin onion mode (1833(1702)1833)
#alternative_frequency = 0 ; (default: 0) check additional osc frequency, value in kHz, example 8MHz=8000000
#alternative_baudrate = 0 ; (default: 0) check additional baudrate for atr, value in bit/s, example 81861
#byte_delay = 0 ; (default: 0) unit (1e-6 s)
#instruction_delay = 0 ; (default: 0) unit (1e-3 s)
#
#enable_unique_emm = 1 ; (default: 0) set unique emm section filter on demux device
#enable_shared_emm = 1 ; (default: 0) set shared emm section filter on demux device
#enable_global_emm = 1 ; (default: 0) set global emm section filter on demux device
#block_unique_emm = 0 ; (default: 1) block unique address/hex_serial emm
#block_shared_emm = 0 ; (default: 1) block shared address/provider emm
#block_global_emm = 0 ; (default: 1) block global address/all_card emm
#block_user_emm = 0 ; (default: 1) block user emm, read from /var/tmp/remm.txt
#save_processed_emm = 0 ; (default: 0) save processed EMMs to (/var/tmp/scXX.emmproc)
#save_processed_emm_file= /var/keys/sc0X.emmproc; (default: /var/tmp/scXX.emmproc) user defined output file
#save_rejected_emm = 0 ; (default: 0) save rejected EMMs to (/var/tmp/scXX.emmblock)
#save_rejected_emm_file = /var/keys/sc0X.emmblock; (default: /var/tmp/scXX.emmblock) user defined output file
#
#sidfilter = 000C,000D ; define sids can dispatch or not dispatch by card
#sidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line local rule 00
# ; allow_all - old cwshare S-Line local rule 01
# ; allow_defined - old cwshare S-Line local rule 02
# ; deny_defined - old cwshare S-Line local rule 03
#sidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line global rule 00
# ; allow_all - old cwshare S-Line global rule 01
# ; allow_defined - old cwshare S-Line global rule 02
# ; deny_defined - old cwshare S-Line global rule 03
#sidfilter_teacher = card ; [card,network] use selected ecm request source to update sidfilter (add or delete current sid)
# ; card - old cwshare S-Line global rule 03, means allow defined and update by zone0
# ; network - old cwshare S-Line global rule 03, means allow defined and update by zone1
#
#pidfilter = 100C,100D ; define pids can dispatch or not dispatch by card
#pidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#pidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#
########################################################################################
#V13/14 Karten
#Sobald für die Karte eine Verlängerung gesendet wird erstellt die gbox in/tmp eine Datei
#Namens SC01.emmblock.Den dort enthaltenen Verlängerer kopiert ihr dann in eine Datei Namens remm.txt
#und schiebt diese dann nach /tmp die gbox arbeitet diese Datei dann automatisch ab,
#und verlängert dann die Karte.Ihr könnt die V13/14 karte natürlich auch in einen anderen Slot stecken ,
#ihr müßt dann aber die config genauso anlegen wie die für Slot 1.
#Solltet ihr noch mehr Karten haben und ein/en externe/n Reader/s benutzen dann müßt ihr die Slots erweitern.
#Ihr könnt bis zu 18 Slots erstellen. Slot1 und Slot2 sind immer eure internen Reader der Box ,ab Slot3 beginen dann
#eure externen Reader.

[generic]
reset_rs232_buffer = 1

[slot-1] # Exklusiv für V13/14 Karten
initialization = extended
disable_pts = 0
enable_ice = 0 # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
byte_delay = 0
instruction_delay = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 1
save_rejected_emm = 1

[slot-2] # Karten die nicht geblock werden brauchen
initialization = extended
disable_pts = 0
enable_ice = 0 # # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0

/debug/disable_sci=1 # disable card slot 2

===============================================
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: FFF40, MKey: 01, SA: 12 88 00
card 1 response in 232 ms
Card response: 90 00
===============================================

[sci0] <- ca a4 04 00 03
[sci0] -> a4
[sci0] <- ff f4 00
[sci0] -> 90
[sci0] -> 00
[sci0] <- ca f4 00 01 2c
[sci0] -> f4
[sci0] <- 91 08 4c ... 65
[sci0] -> 90
[sci0] -> 00