Quantcast
Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Neues IPC 11.6 und Jessie läuft "nicht" nach Systemwechsel von 11.5 und wheezy

druckerberger

druckerberger

Hacker
Registriert
13. August 2010
Beiträge
312
Reaktionspunkte
32
Punkte
88
Ort
Muenchen
Hallo !

Ich komme gerade nicht weiter.
Habe ein raspi mit wheezy und ipc 11.5 schon mehrere Jahre am laufen. Alles einwadfrei, läuft
picobello !

Jetzt wollte ich mal ein komplett neues raspi mit debian Jeezie und ipc 11.6 aufsetzen.
Soweit alles bene. Debian Jessie auf neue Sd-card, geupdatet, ipc installiert, oscam-Dateien übertragen,
udev-Regeln für die Easymäuse wieder angepasst bzw. alles vom alten System übernommen.
Lief da ja wied sau.

Das neue System gestartet, alles fährt hoch, oscam startet automatish, alle reader werden ordentlich initialisert und stehen auf OK, ich verbinde sauber zu allen peers und alle peers verbinden sauber zu mir!

Und jetzt kommt es: Es wird nichts hell !
Im Webif von oscam steht lediglich immer wieder bei current channel "unknown"

Habe ich etwas vergessen ? Habe alles vom alten System übertragen, verwende die gleiche IP (IP-Konflikt habe ich nicht bzw achte ich drauf, es ist das alte System nicht parallel aktiv!), verwende natürlich den gleichen port, stecke auch nur die SD-card um!

Was könnte ich vergessen haben ?
Stecke ich die SDcard mit dem alten Sytem (wheezy,IPC11.5) rein, läuft es sofort einwandfrei !

Danke für Denkanstöße !

Gruß

Drucker Berger
 
hi,
wenn OScam läuft wird es nicht ein IPC Problem sein,
zeig doch mal die Configs und ein log ab start,
werden die Karten überhaupt eingelesen?
deine Fehlerbeschreibung ist sehr mager in der Hinsicht ....
 
Erst einmal danke für eure schnelle Reaktion !
Ich glaube die oscam configs können wir mal auslassen. Wie gesagt, das "alte" System mit den gleichen configs schnurrt wie eine Katze !

oscam.log
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Nov 26 16:50:47 2017
-------------------------------------------------------------------------------
2017/11/26 16:50:47 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11392 (arm-linux-gnueabihf)
2017/11/26 16:50:47 00000000 s (main) System name = Linux
2017/11/26 16:50:47 00000000 s (main) Host name = raspberrypi
2017/11/26 16:50:47 00000000 s (main) Release = 4.14.1+
2017/11/26 16:50:47 00000000 s (main) Version = #1054 Tue Nov 21 15:46:11 GMT 2017
2017/11/26 16:50:47 00000000 s (main) Machine = armv6l
2017/11/26 16:50:47 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 13237
2017/11/26 16:50:47 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/11/26 16:50:47 00000000 s (main) signal handling initialized
2017/11/26 16:50:47 00000000 s (net) newcamd: initialized (fd=5, port=22000)
2017/11/26 16:50:47 00000000 s (net) -> CAID: 1830 PROVID: 003411
2017/11/26 16:50:47 00000000 s (net) gbox: initialized (fd=6, port=7004)
2017/11/26 16:50:47 00000000 s (reader) hd+ [gbox] creating thread for device 127.0.0.1
2017/11/26 16:50:47 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/11/26 16:50:47 00000000 s (main) waiting for local card init
2017/11/26 16:50:47 5237D7C9 p (gbox) we are online - 1 ports to monitor
2017/11/26 16:50:47 5237D7C9 p (reader) 127.0.0.1: resolved ip=127.0.0.1
2017/11/26 16:50:47 5237D7C9 p (gbox) proxy 127.0.0.1 (fd=7, peer id=BBBB, my id=EEEE, my hostname=192.168.0.118,7004, peer's listen port=8010)
2017/11/26 16:50:47 5237D7C9 p (gbox) <- HelloL to hd+
2017/11/26 16:50:47 5237D7C9 p (reader) hd+ [gbox] proxy initialized, server 127.0.0.1:8010
2017/11/26 16:50:47 36149522 h (webif) webif: decompressed 177577 bytes back into 435684 bytes
2017/11/26 16:50:47 36149522 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/11/26 16:50:48 00000000 s (main) init for all local cards done
2017/11/26 16:50:48 00000000 s (anticasc) anti cascading disabled

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Nov 26 17:29:55 2017
-------------------------------------------------------------------------------
2017/11/26 17:29:55 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11392 (arm-linux-gnueabihf)
2017/11/26 17:29:55 00000000 s (main) System name = Linux
2017/11/26 17:29:55 00000000 s (main) Host name = raspberrypi
2017/11/26 17:29:55 00000000 s (main) Release = 4.14.1+
2017/11/26 17:29:55 00000000 s (main) Version = #1054 Tue Nov 21 15:46:11 GMT 2017
2017/11/26 17:29:55 00000000 s (main) Machine = armv6l
2017/11/26 17:29:55 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 689
2017/11/26 17:29:55 00000000 s (config) services reloaded: 0 services freed, 34 services loaded, rejected 0
2017/11/26 17:29:55 00000000 s (config) userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled
2017/11/26 17:29:55 00000000 s (main) signal handling initialized
2017/11/26 17:29:55 00000000 s (config) 21 tier-id's loaded
2017/11/26 17:29:55 00000000 s (net) monitor: initialized (fd=5, port=988)
2017/11/26 17:29:55 00000000 s (net) cccam: initialized (fd=6, port=12121)
2017/11/26 17:29:55 00000000 s (reader) orf [mouse] creating thread for device /dev/ORF
2017/11/26 17:29:55 00000000 s (reader) hd+ [mouse] creating thread for device /dev/HDP
2017/11/26 17:29:55 00000000 s (reader) rlhd [mouse] creating thread for device /dev/RLHD
2017/11/26 17:29:55 00000000 s (reader) peer1 [cccam] creating thread for device xxxxxxxxxx.org
2017/11/26 17:29:55 00000000 s (reader) peer2 [cccam] creating thread for device xxxxxxxxxx.com
2017/11/26 17:29:55 00000000 s (reader) peer3 [cccam] creating thread for device xxxxxxxxx.de
2017/11/26 17:29:55 00000000 s (reader) .......
..........
2017/11/26 17:29:55 00000000 s (reader) peer_xy [cccam] creating thread for device xxxxxxxx.net
2017/11/26 17:29:55 235CF8E8 r (reader) rlhd [mouse] Buffers readed 0 bytes total time_us 78246
2017/11/26 17:29:55 72D172FA r (reader) hd+ [mouse] Buffers readed 0 bytes total time_us 76177
2017/11/26 17:29:55 430EFFB2 p (reader) peer_yx: resolved ip=xx.142.xx.100
2017/11/26 17:29:55 430EFFB2 p (reader) peer_ds [cccam] connecting to xxxxxx.info:12222
2017/11/26 17:29:55 44CDC3E4 p (reader) xxxxxx.dyndns.org: resolved ip=xx.179.xx.1x4
2017/11/26 17:29:55 44CDC3E4 p (reader) peer_as [cccam] connecting to xxxxxxxxxxx.org:47015
2017/11/26 17:29:55 30CB4B9F p (reader) ......
...

2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75239
2017/11/26 17:29:55 235CF8E8 r (reader) rlhd [mouse] Flush readed byte Nr 2 value 11 time_us 16980
2017/11/26 17:29:55 235CF8E8 r (reader) rlhd [mouse] Flush readed byte Nr 3 value e7 time_us 492
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 1 value 3b time_us 7881
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 2 value 78 time_us 226
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 3 value 12 time_us 87
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 4 value 00 time_us 126
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 5 value 00 time_us 252
2017/11/26 17:29:55 35623D15 r (reader) orf [mouse] Flush readed byte Nr 6 value 54 time_us 61
usw
usw
usw

oscam.conf
###################################################################################

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 10
LogFile = /var/log/ipc/OScam.log
maxlogsize = 16384
Level = 15
saveinithistory = 1
unlockparental = 1
preferlocalcards = 2
clientdyndns = 1
lb_mode = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_stat_cleanup = 2

Protocols

[cccam]
port = 12121
reshare = 1
version = 2.3.0
minimizecards = 0
keepconnected = 1
stealth = 0

[monitor]
port = 988
nocrypt = 127.0.0.1

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httpcss =
httptpl =
httpscript =
httprefresh = 0
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns =
httphideidleclients = 0
httpreadonly = 0
 
usw
usw
???
werden die Karten dann eingelesen?
wenn ja, was kommt bei einer Sender Abfrage?
mit usw ist keinem geholfen ...
 
Tja, ich kann ja auch gleich meinen ganzen Server öffentlich machen !?
Möchtest du IP und peers mit oscam.server haben ?

Sie müssen registriert sein, um Links zu sehen.
 
nein danke, das wird nicht benötigt,
die Frage war nur ob die Karten eingelesen werden und was bei einer Anfrage kommt,
wie stellst du dir die Hilfestellung sonst vor? durch raten?

laut deinem Bild werden die Karten eingelesen, es wird die Caid 1843 angefragt, hast du eine Hd02 Karte?
hier wären doch mal die KOMPLETTEN Configs nötig
 
Gleich wirst du ein wenig angepisst sein, aber mal die Frage "warum läuft das alte System" einwadfrei ?
Was soll da das nach-config-gefrage ? Komme mir vor wie jemand, dem der Fuß weh tut, aber er gefragt wird,
wann er zuletzt Stuhlgang hatte !

Ja, ich habe eine HD02-Karte, aber was die Frage hilft,.....

Ich sag erst einmal Danke !
 
Sag ich doch ......"angepisst sein"

2017/11/26 19:07:39 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:07:39 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:07:39 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:07:40 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:07:40 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75341
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75268
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75207
2017/11/26 19:07:41 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:07:42 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:07:42 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:07:42 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:07:43 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:07:43 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:07:43 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:07:43 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:07:43 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:07:44 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:07:44 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26

2017/11/26 19:07:44 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:07:44 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:07:44 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:07:47 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:07:47 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:07:47 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:07:48 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:07:48 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 82134
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75141
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 80696
2017/11/26 19:07:49 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:07:50 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:07:50 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:07:50 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:07:51 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:07:51 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:07:51 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:07:51 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:07:51 421FCC1C c (client) encrypted cccam-client 77.64.196.142 rejected (invalid access)

2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:07:51 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:07:52 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:07:52 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:07:52 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:07:52 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:07:52 37CEEC11 r (reader) orf [irdeto] ready for requests
2017/11/26 19:08:04 762B6E3F c (client) encrypted cccam-client 77.64.196.142 rejected (invalid access)

2017/11/26 19:08:10 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:08:10 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:08:10 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:08:11 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:08:11 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75246

2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75241
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75281
2017/11/26 19:08:12 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:08:13 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:08:13 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:08:13 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:08:14 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:08:14 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:08:14 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:08:14 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:08:14 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:15 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:08:15 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:15 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:08:15 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:15 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:08:23 708719F4 r (reader) hd+ [nagra] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:08:23 708719F4 r (reader) hd+ [nagra] Error getting card status.
2017/11/26 19:08:23 708719F4 r (reader) hd+ [nagra] card ejected
2017/11/26 19:08:24 708719F4 r (reader) hd+ [mouse] card detected
2017/11/26 19:08:24 708719F4 r (reader) hd+ [mouse] Buffers readed 0 bytes total time_us 77991
2017/11/26 19:08:25 708719F4 r (reader) hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2017/11/26 19:08:25 708719F4 r (reader) hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2017/11/26 19:08:25 708719F4 r (reader) hd+ [mouse] Setting baudrate to 115200 bps
2017/11/26 19:08:25 708719F4 r (reader) hd+ [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2017/11/26 19:08:26 708719F4 r (reader) hd+ [mouse] Buffers readed 0 bytes total time_us 75361
2017/11/26 19:08:26 708719F4 r (reader) hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.68 MHz (specified in reader->mhz)
2017/11/26 19:08:26 708719F4 r (reader) hd+ [mouse] Card responded ok for ifsd request of 160
2017/11/26 19:08:27 708719F4 r (reader) hd+ [mouse] detect native nagra card
2017/11/26 19:08:28 708719F4 r (reader) hd+ [mouse] ready for requests
2017/11/26 19:08:28 708719F4 r (reader) hd+ [mouse] found card system nagra
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] ROM: D N A S P 1 8 0
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] REV: M e r 0 0 0
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] SER: ############
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] CAID: 1843
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] Prv.ID: 00 00 00 00
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] IRD ID: ############
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] active to: 2018/01/17 11:59
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] -----------------------------------------
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] |id |tier |valid from |valid to |
2017/11/26 19:08:28 708719F4 r (reader) hd+ [nagra] +----+--------+------------+------------+
2017/11/26 19:08:29 708719F4 r (reader) hd+ [nagra] |8011|0066 |2017/08/28 |2018/08/29 |
2017/11/26 19:08:29 708719F4 r (reader) hd+ [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2017/11/26 19:08:29 708719F4 r (reader) hd+ [nagra] -----------------------------------------

2017/11/26 19:08:38 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:08:38 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:08:38 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:08:39 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:08:39 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75326
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75212
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 80615
2017/11/26 19:08:40 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:08:41 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:08:41 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:08:42 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:08:42 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:08:42 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:08:42 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:08:42 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:08:42 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:08:43 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:09:50 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:09:50 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:09:50 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:09:51 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:09:51 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75232

2017/11/26 19:09:52 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 76383
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 87582
2017/11/26 19:09:53 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)

2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:09:54 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:09:54 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:09:55 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:09:59 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:09:59 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:09:59 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:10:00 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:10:00 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75233

2017/11/26 19:10:01 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75313
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 83903
2017/11/26 19:10:02 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:10:03 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:10:03 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:10:03 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:10:03 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:10:03 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:10:04 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:10:04 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:04 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:10:28 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:10:28 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:10:28 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:10:29 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:10:29 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75187
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75418
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 86298
2017/11/26 19:10:31 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:10:32 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:10:32 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:33 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:10:42 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:10:42 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:10:42 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:10:43 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:10:43 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75255
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 76415
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75184
2017/11/26 19:10:45 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:10:46 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:10:46 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:10:46 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:10:46 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:10:46 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:10:47 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:10:47 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 1, id: BFC5FF
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: FFE0, date: 2017/11/07 - 2018/07/15
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 0001, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 0002, date: 2017/11/25 - 2018/08/02
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 7FFB, date: 2017/11/25 - 2017/12/25
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 7FF7, date: 2017/11/25 - 2017/12/05
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: FFD8, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 2, id: 002500
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 001D, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] entitlements for provider: 4, id: 002700
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] chid: 0031, date: 2015/11/26 - 2015/12/26
2017/11/26 19:10:47 37CEEC11 r (reader) orf [irdeto] ready for requests

2017/11/26 19:11:25 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/11/26 19:11:25 37CEEC11 r (reader) orf [irdeto] Error getting card status.
2017/11/26 19:11:25 37CEEC11 r (reader) orf [irdeto] card ejected
2017/11/26 19:11:26 37CEEC11 r (reader) orf [mouse] card detected
2017/11/26 19:11:27 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75298
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75255
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] Setting baudrate to 19838 bps
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] Calculated work ETU is 50.41 us reader mhz = 369
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] Buffers readed 0 bytes total time_us 75242
2017/11/26 19:11:28 37CEEC11 r (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.69 MHz (specified in reader->mhz)
2017/11/26 19:11:29 37CEEC11 r (reader) orf [mouse] Hist. Bytes: TÄ
2017/11/26 19:11:29 37CEEC11 r (reader) orf [mouse] detect irdeto card
2017/11/26 19:11:29 37CEEC11 r (reader) orf [mouse] caid: 0648, acs: 0.05, country code: AUT
2017/11/26 19:11:29 37CEEC11 r (reader) orf [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/11/26 19:11:29 37CEEC11 r (reader) orf [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/11/26 19:11:30 37CEEC11 r (reader) orf [mouse] active providers: 4 (bfc5ff,002500,002600,002700)
2017/11/26 19:11:30 37CEEC11 r (reader) orf [mouse] found card system irdeto
2017/11/26 19:11:30 37CEE
 
Zuletzt bearbeitet von einem Moderator:
Was soll da das nach-config-gefrage ? Komme mir vor wie jemand, dem der Fuß weh tut, aber er gefragt wird,
wann er zuletzt Stuhlgang hatte !
Zum Vergrößern anklicken....
@druckerberger:
Wie man in den Wald schreit....
An IPC liegt es mit Sicherheit nicht, liest ja selbst keine Karten. Für Debian bin ich nicht verantwortlich. Kann eigentlich nur an OScam liegen
Aber jetzt mal ernsthaft: Wie soll dir jemand ohne Configs helfen können? Mit dem Screenshot ist ja nur ersichtlich, dass es eine HD02 ist, sonst gar nix.

2017/11/26 19:08:10 37CEEC11 r (reader) orf [irdeto] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
Zum Vergrößern anklicken....
Der Reader macht an und für sich Probleme. Da es unter Wheezy zu gehen scheint, würde ich mal auf den Kernel des neuen OS tippen
 
Zuletzt bearbeitet:
da irrst du dich,
nur raten wird hier keiner wieso weshalb warum,
eine Fehlersuche benötigt bisschen mehr als die geschnipsel die du gepostet hast,
dein Arzt fragt dich auch bestimmt auch nicht wenn du rein kommst und sagst der Fuß tut weh was du gemacht hast ....

@Alex
da sieht man auch nur das 1843 angefragt wird, kann ich auch bei meiner HD01 eintragen, dann bekomme ich auch so eine Anfrage :)
 
Ok,Alex

Von welchen Configs sprecht ihr ?
Ich werde hier, mal abgesehen davon das das garnichts hilft, keine oscam.server oder oscam.user posten.
Die oscam.config habe ich oben schon hingehängt.
Was wäre dann noch von belang bzw. aussagekraft ?

Ich habe die oscam-version neu compliliert. Bin von 106xx auf 11392 gesprungen. Mehr nicht.
Gleiche oscam-files, nur IPC 11.6 jetzt.
 
nur zur Info:
Jessie mit diesem Kernel auf einem frisch ausgepackten und neu aufgesetzten Raspi3 :
Code: 
Linux raspberrypi 4.9.65-v7+ #1056 SMP Fri Nov 24 13:58:07 GMT 2017 armv7l GNU/L
läuft bei mir ohne Probleme.

LG joerg_999
 

Ähnliche Themen

B
gelöst IPC OScam Updateverzeichnis ändern
Antworten
10
Aufrufe
2K
batic
B
H
gelöst Neue ORF Karte C810 als Nachfolger für P410 lässt sich nicht aktivieren
Antworten
5
Aufrufe
2K
Hirnduebel
H
T
gelöst Oscam Einstellungen auf einem pi mit Debian 7.6 IPC
Antworten
6
Aufrufe
2K
trekstore
T
Futuro
HowTo - Thin Client mit Debian IPC und Oscam_Cccam_NweCamd aufsetzen
Antworten
7
Aufrufe
3K
axel
axel
S
Für IPC welches Debian?
2 3 4
Antworten
53
Aufrufe
8K
schrom
S
Zurück
Oben