Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

[webman2]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Wenn in reader in der oscam.server label = sky eingetragen ist, stimmt au = sky beim client.

Aktiviere die Karte direkt im Receiver mit Oscam - der Fehler liegt irgendwo in Deinem Aufbau - da können wir Dir remote nicht helfen.

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Ok,
dann werde ich mich mal mit der Anleitung von 4gx35 beschäftigen.
Vielen Dank,
Ralf

 

[4gx35]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

kein hostname bei usern, nimm mal alles bis auf c-line bei cccam.cfg raus

easy configs für receiver V14 auf die box, aktuelle oscam aus dem feed oder meinen downloads,
sollte sofort laufen

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Ok, werde mich nachher (ca. 19.00 Uhr) nochmal ransetzen.
Muss jetzt erstmal weg.
Gruß
Ralf

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

easy configs für receiver V14 auf die box, aktuelle oscam aus dem feed oder meinen downloads,
sollte sofort laufen

So, bin jetzt wieder da und habe oscam installiert.
Das Logfile sagt

Spoiler

>> OSCam << cardserver started at Tue May 12 19:14:04 2015
-------------------------------------------------------------------------------
2015/05/12 19:14:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10660 (mipsel-openpli40-linux-gnu)
2015/05/12 19:14:04 0 s (main) System name = Linux
2015/05/12 19:14:04 0 s (main) Host name = et9000
2015/05/12 19:14:04 0 s (main) Release = 3.6.0
2015/05/12 19:14:04 0 s (main) Version = #1 SMP Sun Jan 27 15:32:24 CET 2013
2015/05/12 19:14:04 0 s (main) Machine = mips
2015/05/12 19:14:04 0 s (main) Stb model = dm800se
2015/05/12 19:14:04 0 s (main) Stb boxtype = et9000
2015/05/12 19:14:04 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1667
2015/05/12 19:14:04 0 s [Emu] oscam-emu version 715
2015/05/12 19:14:04 0 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2015/05/12 19:14:04 0 s (main) signal handling initialized
2015/05/12 19:14:04 0 s (net) cccam: initialized (fd=5, port=33333)
2015/05/12 19:14:04 0 s (reader) v14 [internal] creating thread for device /dev/sci0
2015/05/12 19:14:04 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/12 19:14:04 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/12 19:14:04 0 s (main) waiting for local card init
2015/05/12 19:14:04 568B78 r key file not found in: /etc/tuxbox/config/oscam_ymod
2015/05/12 19:14:04 568B78 r reading key file: /var/keys/SoftCam.Key
2015/05/12 19:14:04 568800 r (reader) v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/05/12 19:14:04 568800 r (reader) v14 [internal] Reader sci internal, detected box type: et9000
2015/05/12 19:14:04 569138 h (webif) webif: decompressed 157307 bytes back into 371504 bytes
2015/05/12 19:14:04 569138 h (webif) HTTP Server running. ip=0.0.0.0 port=17000
2015/05/12 19:14:04 568B78 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/12 19:14:05 568800 r (reader) v14 [internal] card detected
2015/05/12 19:14:05 568B78 r (reader) emulator [emu] card detected
2015/05/12 19:14:06 568B78 r (reader) emulator [emu] found card system emu
2015/05/12 19:14:06 568B78 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/12 19:14:06 568B78 r key file not found in: /etc/tuxbox/config/oscam_ymod
2015/05/12 19:14:06 568B78 r reading key file: /var/keys/SoftCam.Key
2015/05/12 19:14:06 568800 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/12 19:14:06 568800 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/12 19:14:06 568800 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/12 19:14:10 568800 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 3968354
2015/05/12 19:14:11 568800 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/12 19:14:12 568800 r (reader) v14 [internal] Card type: P1TV
2015/05/12 19:14:12 568800 r (reader) v14 [internal] Rom version: 20AA
2015/05/12 19:14:12 568800 r (reader) v14 [internal] Credit available on card: 0 euro
2015/05/12 19:14:12 568800 r (reader) v14 [internal] Extended 4C detected
2015/05/12 19:14:12 568800 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/05/12 19:14:12 568800 r (reader) v14 [internal] found card system videoguard2
2015/05/12 19:14:12 568800 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/12 19:14:12 568800 r (reader) v14 [videoguard2] card detected
2015/05/12 19:14:12 568800 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/05/12 19:14:13 0 s (main) init for all local cards done
2015/05/12 19:14:13 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/05/12 19:14:13 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2015/05/12 19:14:13 5BA8C0 c (client) plain dvbapi-client granted (serverbox, au=auto (14 reader))
2015/05/12 19:14:13 5BA8C0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_ymod/oscam.ccache
2015/05/12 19:14:13 5BA8C0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/05/12 19:14:13 568800 r (reader) v14 [videoguard2] Deactivating card
2015/05/12 19:14:13 568800 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/05/12 19:14:13 5C2CF0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/05/12 19:14:13 5C2CF0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et9000
2015/05/12 19:14:14 5C2CF0 r (reader) v14 [videoguard2] card detected
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 found 5 ECMpids and 3 STREAMpids in PMT
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 serving srvid 0017 (1702:0017 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/05/12 19:14:15 5BA8C0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/12 19:14:18 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:14:21 5C2CF0 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/12 19:14:21 5C2CF0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/05/12 19:14:21 5C2CF0 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/05/12 19:14:21 5C2CF0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75156
2015/05/12 19:14:21 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:14:21 5C2CF0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/12 19:14:24 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:14:28 5C2CF0 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:14:28 5C2CF0 r (reader) v14 [internal] card system not supported
2015/05/12 19:14:28 5C2CF0 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/12 19:14:30 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:14:33 5C2CF0 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:14:33 5C2CF0 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/12 19:14:33 5C2CF0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/12 19:14:33 5C2CF0 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/12 19:14:33 5C2CF0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75203
2015/05/12 19:14:34 5C2CF0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/12 19:14:36 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:14:40 5C2CF0 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:14:40 5C2CF0 r (reader) v14 [internal] card system not supported
2015/05/12 19:14:40 5C2CF0 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/12 19:14:40 5C2CF0 r (reader) v14 [internal] card initializing error
2015/05/12 19:14:42 5BA8C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Der Status der Karte ist Error (no entitlements)

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l
# kein emmlogdir >>> emm logs im oscam config ordner

[cccam]
port = 33333
version = 2.3.0
reshare = 1
ignorereshare = 0

[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 17000
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

oscam.dvbapi

Spoiler

# nur bei Receivern mit oscam zu verwenden, hilfreich aber nicht zwingend notwendig
# hier zeilenweise die caid der karten und proxy reader aus oscam.server eintragen
# P: bedeutet Priorisieren, die abarbeitung der sender caid beginnt mit der 1. zeile
# bei der senderabfrage am server wird zuerst
# die caid 1830 zur entschluesselung versucht und die zugehörige karte gelesen, danach erst 098C
# beispiel, bitte unbedingt vor dem kopieren bearbeiten !!!!!! # vor P und I entfernen !!!
#
#P: 0D05
#P: 1830
#P: 098C
#I: 0
#
# zb wird mit I: 1722 die caid 1722 ausgeschlossen (Ignore), mit 0 dann alle, die nicht bei P: stehen
# diese datei wird zu den anderen oscam configs kopiert, bei änderungen oscam neu starten
#
### >>> gleiche funktion erhält man für cccam clients mit CCcam.prio <<<

oscam.server

Spoiler

[reader]
label = s02
description = S02-Sat
enable = 0
protocol = internal
device = /dev/sci0
services = sky_s02
caid = 1702
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = hd02
description = HD+schwarz
enable = 0
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = v13
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v13,v13hdplus
caid = 09C4
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v14
description = V14-Sky
enable = 1
protocol = internal
device = /dev/sci0
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = orfice
description = ORF-Ice
enable = 0
protocol = internal
device = /dev/sci1
services = orfice,kombiaustria
caid = 0648
boxid = 12345678
boxkey = 1122334455667788
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = i12
description = i12-Unitymedia
enable = 0
protocol = internal
device = /dev/sci0
services = sky_i12
caid = 1722,1835
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = um02
description = um02-Unitymedia
enable = 0
protocol = internal
device = /dev/sci1
caid = 1838
boxkey = A7642F57BC96D37C
rsakey = B55E0EB0562805F1788BDA0CD8B856BF696CFF1CBF4ED62B85E643F385B0F8899275DEA669AC77BDA43A20CCB844A3AF5A2BE0622779FAB153D156957DF367FF
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = d02
description = D02-KD
enable = 0
protocol = internal
device = /dev/sci0
services = sky_d02
caid = 1722,1834
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = d09
description = D09-KD
enable = 0
protocol = internal
device = /dev/sci1
services = sky_d09
caid = 1834
rsakey = 8A54468867159C1188D13ACE7DF348FA08BDF8BE33F1B2F72F74FBCD184C825519E517E3494A6DD8CF046630456111F952979DECCFF5176D890AE93F4E267711
boxkey = 6660A9AE55A4847B
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = g0209
description = G02G09-KD
enable = 0
protocol = internal
device = /dev/sci0
services = sky_g0209
caid = 09C7
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2

[reader]
label = v23
description = v23 Kabel
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v23
caid = 098E
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip,serverport
user = c_line_user
password = c_line_pass
group = 2
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

oscam.user

Spoiler

[account]
user = serverbox
au = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccignorereshare = 0

[account]
user = client1
pwd = pass1
uniq = 3
keepalive = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
user = client2
pwd = pass2
uniq = 3
keepalive = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0

Wie geht es jetzt weiter?

 

[4gx35]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

du hast die configs nicht bearbeitet, überflüssige reader entfernen, emu deaktivieren (stört nur im log)
betatunnel beim user ? oscam.dvbapi ???
ins7e11= 14 testen, der interne reader kann evtl fastmode nicht

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Ok, jetzt so
oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l
# kein emmlogdir >>> emm logs im oscam config ordner

[cccam]
port = 33333
version = 2.3.0
reshare = 1
ignorereshare = 0

[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 17000
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
http_status_log = 1

oscam.user

Spoiler

[account]
user = serverbox
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2
cccignorereshare = 0

[account]
user = client1
pwd = pass1
uniq = 3
keepalive = 1
betatunnel = 1833.FFFF:1702
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
user = client2
pwd = pass2
uniq = 3
keepalive = 1
betatunnel = 1833.FFFF:1702
group = 1,2
cccreshare = 0
cccignorereshare = 0

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10660
# Read more:

Sie müssen registriert sein, um Links zu sehen

[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000
group = 1
emmcache = 1,1,2,1
auprovid = 030B00

oscam.dvbapi

Spoiler

# nur bei Receivern mit oscam zu verwenden, hilfreich aber nicht zwingend notwendig
# hier zeilenweise die caid der karten und proxy reader aus oscam.server eintragen
# P: bedeutet Priorisieren, die abarbeitung der sender caid beginnt mit der 1. zeile
# bei der senderabfrage am server wird zuerst
# die caid 1830 zur entschluesselung versucht und die zugehörige karte gelesen, danach erst 098C
# beispiel, bitte unbedingt vor dem kopieren bearbeiten !!!!!! # vor P und I entfernen !!!
#
#P: 0D05
#P: 1830
P: 098C
I: 0
#
# zb wird mit I: 1722 die caid 1722 ausgeschlossen (Ignore), mit 0 dann alle, die nicht bei P: stehen
# diese datei wird zu den anderen oscam configs kopiert, bei änderungen oscam neu starten
#
### >>> gleiche funktion erhält man für cccam clients mit CCcam.prio <<<

Status ist Error (no entitlements)

Im Log steht

Spoiler

2015/05/12 19:41:51 567E90 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 14
2015/05/12 19:41:51 567E90 r (reader) v14 [internal] found card system videoguard2
2015/05/12 19:41:51 567E90 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/12 19:41:51 567E90 r (reader) v14 [videoguard2] card detected
2015/05/12 19:41:51 567E90 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/05/12 19:41:51 0 s (main) init for all local cards done
2015/05/12 19:41:51 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/05/12 19:41:51 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2015/05/12 19:41:51 56B4F8 c (client) plain dvbapi-client granted (serverbox, au=auto (2 reader))
2015/05/12 19:41:51 56B4F8 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_ymod/oscam.ccache
2015/05/12 19:41:51 56B4F8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/05/12 19:41:52 567E90 r (reader) v14 [videoguard2] Deactivating card
2015/05/12 19:41:52 567E90 r (reader) v14 [videoguard2] creating thread for device /dev/sci0
2015/05/12 19:41:52 76C00508 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/05/12 19:41:52 76C00508 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et9000
2015/05/12 19:41:53 76C00508 r (reader) v14 [videoguard2] card detected
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 found 5 ECMpids and 3 STREAMpids in PMT
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 serving srvid 0017 (1702:0017 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/05/12 19:41:54 56B4F8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/12 19:41:56 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:41:59 76C00508 r (reader) v14 [internal] ATR: 3F FD 14 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/12 19:41:59 76C00508 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=8, N=2
2015/05/12 19:41:59 76C00508 r (reader) v14 [internal] Calculated work ETU is 10.33 us reader mhz = 450
2015/05/12 19:41:59 76C00508 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75157
2015/05/12 19:41:59 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:42:00 76C00508 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/12 19:42:02 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:42:07 76C00508 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:42:07 76C00508 r (reader) v14 [internal] card system not supported
2015/05/12 19:42:07 76C00508 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/12 19:42:08 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:42:12 76C00508 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:42:12 76C00508 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/12 19:42:12 76C00508 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/12 19:42:12 76C00508 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/12 19:42:12 76C00508 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75162
2015/05/12 19:42:13 76C00508 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/12 19:42:14 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/12 19:42:20 76C00508 r (-) -- Skipped 1 duplicated log lines --
2015/05/12 19:42:20 76C00508 r (reader) v14 [internal] card system not supported
2015/05/12 19:42:20 76C00508 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/12 19:42:20 76C00508 r (reader) v14 [internal] card initializing error
2015/05/12 19:42:20 56B4F8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Sky Krimi ist an, ECM´s und EMM´s gibt es keine...

 

[webman2]

AW: Neue v14 sofort einsetzen oder S02 &quot;aufbrauchen&quot;?

Da stimmt was nicht:


2015/05/12 19:42:07 76C00508 r (reader) v14 [internal] card system not supported
2015/05/12 19:42:07 76C00508 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode

- - - - - - - - - -

Lösche mal bitte den Eintrag betatunnel beim user serverbox:

betatunnel = 1833.FFFF:1702

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Heißt das, das die Karte in der et9000 nicht im internen Slot läuft?

 

[4gx35]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

betatunnel entfernen, log leider zu kurz, aber offensichtlich (reader) v14 [internal] card initializing error
was steht im webif beim status des readers ?
ins7e11 ganz entfernen, oscam restart

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

betatunnel entfernt, oscam neu gestartet.
Jetzt haben wir Cardok (no entitlements), das ist doch schon mal was!
NOK ECM´s kommen jetzt auch durch

Lo wiederholt jetzt immer wieder

Spoiler

2015/05/12 19:53:09 569F88 c (ecm) serverbox (098C/0017/98): not found (3 ms) by v14
2015/05/12 19:53:09 569F88 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 4 disabled ecmpids!
2015/05/12 19:53:09 569F88 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
2015/05/12 19:53:10 569F88 c (ecm) serverbox (098C/0017/98): not found (3 ms) by v14
2015/05/12 19:53:10 569F88 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 4 disabled ecmpids!
2015/05/12 19:53:10 569F88 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
2015/05/12 19:53:10 569F88 c (ecm) serverbox (098C/0017/98): not found (3 ms) by v14
2015/05/12 19:53:11 569F88 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/05/12 19:53:11 569F88 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
2015/05/12 19:53:11 567E90 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/05/12 19:53:11 567E90 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/05/12 19:53:11 567E90 r (reader) v14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/05/12 19:53:11 567E90 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/05/12 19:53:11 569F88 c (ecm) serverbox (098C/0017/98): not found (99 ms) by v14
2015/05/12 19:53:11 569F88 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 4 disabled ecmpids!
2015/05/12 19:53:11 569F88 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF

Update: EMM´s kommen an, ein unique ist da, 4 unknown.

Wie geht es da weiter?

 

[4gx35]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

fehlermeldung ist normal, karte kann nicht entschlüsseln

besorge dir eine easymouse für den server,
vermute, dass v14 mit smargo nicht im fastmode 15 laufen wird

du kannst das speichern von global emms testen

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

Global EMM´s habe ich noch keine bekommen, wie speicher ich die denn dann?
Wenn ich unter Reader auf das Write EMM´s - Symbol klicke, wird mir nur ein unique emm angezeigt

 

[4gx35]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

das ist es doch schon, also alles ok !!! , globals kannst du vergessen (war nur zum testen gedacht)
es kommt nur 1 emm/std !!!

8270 xx sind die wichtigen ziffern zum späteren posten

jetzt nochmals letzte seiten der anleitung lesen, nachdem du nur noch geduld haben musst,
in ein paar stunden oder morgen die verschiedenen emm hier posten

 

[Simple Mind]

AW: Neue v14 sofort einsetzen oder S02 "aufbrauchen"?

SUPER, vielen Dank an 4gx35 und die anderen!

Was sagt denn mein 8270 99 aus?
Woran erkenn ich, ob das ungefährlich ist?