ET4000 liest Karte (HD02) nicht

[B.G.A.]

Hallo Gemeinde,


habe hier einen neuen ET4000. Der will aber die HD02 nicht lesen. Habe erst mit OpenPli getestet und jetzt das aktuellste OpenATV hier aus dem Board drauf (inkl. Cam-Feed).
Vom Feed habe ich mir SCam 3.59 und danach 3.60 gezogen. beide tun nix. Also wieder runter und CCCam2.30 drauf. Ergebnis: Keine oder unbekannte Karte. Jetzt OSCam drauf und folgendes Log erhalten:

Spoiler

2014/04/20 15:41:33 53A448 h reader0_hd+_hd02 [internal] Restarting reader
2014/04/20 15:41:33 53A448 h reader0_hd+_hd02 [internal] creating thread for device /dev/sci0
2014/04/20 15:41:33 538748 r reader0_hd+_hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] card detected
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/04/20 15:41:34 538748 r reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 160
2014/04/20 15:41:35 538748 r reader0_hd+_hd02 [internal] detect native nagra card
2014/04/20 15:41:37 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:37 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:38 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:38 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:40 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:40 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:41 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:41 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:41 538748 r reader0_hd+_hd02 [internal] card system not supported
2014/04/20 15:41:41 538748 r reader0_hd+_hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/04/20 15:41:42 538748 r reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/04/20 15:41:42 538748 r reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/04/20 15:41:42 538748 r reader0_hd+_hd02 [internal] Calculated work ETU is 101.09 us reader mhz = 368
2014/04/20 15:41:42 538748 r reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/04/20 15:41:43 538748 r reader0_hd+_hd02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/04/20 15:41:44 538748 r reader0_hd+_hd02 [internal] detect native nagra card
2014/04/20 15:41:46 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] T1 Resync command error, trying to reactivate!
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/04/20 15:41:48 538748 r reader0_hd+_hd02 [internal] Card responded ok for ifsd request of 160
2014/04/20 15:41:50 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:50 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:51 538748 r reader0_hd+_hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/04/20 15:41:51 538748 r reader0_hd+_hd02 [internal] T1 Resync command succesfull ifsc = 160
2014/04/20 15:41:51 538748 r reader0_hd+_hd02 [internal] card system not supported
2014/04/20 15:41:51 538748 r reader0_hd+_hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/04/20 15:41:51 538748 r reader0_hd+_hd02 [internal] card initializing error

Ideen?

 

[dodo83]

AW: ET4000 liest Karte (HD02) nicht

welche oscam version?
configs dazu?

EDIT
ist zwar abgelaufen aber...

Spoiler

• 2014/04/20 16:57:26 77700468 h HDplus [internal] Restarting reader
• 2014/04/20 16:57:26 77700468 h HDplus [internal] creating thread for device /dev/sci0
• 2014/04/20 16:57:26 77707CA0 r HDplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] card detected
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/04/20 16:57:27 77707CA0 r HDplus [internal] Card responded ok for ifsd request of 160
• 2014/04/20 16:57:28 77707CA0 r HDplus [internal] detect native nagra card
• 2014/04/20 16:57:30 77707CA0 r HDplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/04/20 16:57:30 77707CA0 r HDplus [internal] T1 Resync command succesfull ifsc = 160
• 2014/04/20 16:57:31 77707CA0 r HDplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/04/20 16:57:31 77707CA0 r HDplus [internal] T1 Resync command succesfull ifsc = 160
• 2014/04/20 16:57:32 77707CA0 r HDplus [internal] found card system nagra
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] ROM: D N A S P 1 8 0
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] REV: M e r 0 0 0
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] SER: ############
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] CAID: 1843
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] Prv.ID: 00 00 00 00
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] IRD ID: ############
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] active to: 2013/07/22 12:59
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] -----------------------------------------
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] |id |tier |valid from |valid to |
• 2014/04/20 16:57:32 77707CA0 r HDplus [nagra] +----+--------+------------+------------+
• 2014/04/20 16:57:33 77707CA0 r HDplus [nagra] |8011|0066 |2010/10/10 |2011/10/12 |
• 2014/04/20 16:57:33 77707CA0 r HDplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
• 2014/04/20 16:57:33 77707CA0 r HDplus [nagra] -----------------------------------------
• 2014/04/20 16:57:33 77707CA0 r HDplus [nagra] ready for requests

oscam.server

Spoiler

[reader]
label = HDplus
enable = 1
protocol = internal
device = /dev/sci0
autospeed = 0
boxkey = A76xxxxxxD37C
rsakey = BF358BxxxxxxxxxxA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 5
emmcache = 1,1,2

 

[MR Download]

AW: ET4000 liest Karte (HD02) nicht

was sagt die oscam zu den entitlementes?
karte vllt abgelaufen?
schick dir mal über die HD+ homepage eine neue freiischaltung

 

[dodo83]

AW: ET4000 liest Karte (HD02) nicht

die karte wird doch laut seinem log nichtmal eingelesen
daher wird er wohl zu den entitlements nichts sagen können
auch wenn die abgelaufen ist/wär sollte die gelesen werden, siehe meine

 

[B.G.A.]

AW: ET4000 liest Karte (HD02) nicht

welche oscam version?
configs dazu?

Oscam r9536

server:

Spoiler

[reader]
label = reader0_hd+_hd02
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 1843
boxkey = AxxC
rsakey = Bxx5
detect = cd
nagra_read = 1
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

in meinem PI läuft die Karte bis Juni.

 

[penks]

AW: ET4000 liest Karte (HD02) nicht

Wenn du die Karte im unteren Kartenschacht betreibst, stecke sie mal in den oberen (Chip nach oben). Bei mir läuft die HD02 im unteren auch nicht.

penks

 

[B.G.A.]

AW: ET4000 liest Karte (HD02) nicht

stecke sie mal in den oberen (Chip nach oben)

device = /dev/sci0

Sie steckt im oberen. Sie wird auch im unteren Leser nicht erkannt.

 

[B.G.A.]

AW: ET4000 liest Karte (HD02) nicht

Hatte noch eine abgelaufene HD02 rumliegen. Die hat der ET gelesen. Also hab ich die jetzt "aufgeladen" und Oma kann wieder gucken. Die Problemkarte bleibt erst mal im PI, wo sie ja läuft.