IPL: A239 C0,16153A [2016-04-13 13:39:22], J5, PG3.0, GL-S = 64 (0), RAM = 128, RST = 9
CLK: 720/600/400 MHz ( ARM / DSP / DDR)
IOC: 4e33427e 7e7e7e7e 7e7e4151 7e7e7e00
BREAK detected - press any key to stop the ipl within 5000ms! => BREAK accepted! 0
Entering CLI [?], Type '?' for help
=> help
Please enter one of the following commands
b115200 - set baudrate for ser1 to 115200
b460800 - set baudrate for ser1 to 460800
b921600 - set baudrate for ser1 to 921600
bconf - alias for 'printenv'
bios - alias for 'boot - t BIOS ... '
dspl - dump dsp loader args
echo - print arguments to console
eraseit - flash erase
flashit - flash update
fscan - scan NOR flash
getenv - set environment variables
go - jump to 'addr'
help - show available commands and help on the latter.
hwconf - dump hardware configuration
ioc_mode - read IOC boot mode (SPI)
iplver - show IPL status / version
memboot - boot image (s) from memory
memperf - memory performance test (benchmark)
memtest - memory test
mt - alias for 'memtest'
printenv - display environment variables and their content
qboot - alias for 'boot -t QNX ...'
rz - alias for 'zmodem'
sboot - start boot table via DSP loader
setenv - set an environment variable or change its value
tstamps - dump time stamps
unsetenv - set environment variables
zmodem - download img over serial line (Z-Modem protocol)
=> boot -t emerg
fb2: ARM = 8020000/2
*** WARNING : Enabling DSP access to the entire RAM!
ipl done
Startup: PL_qnx_startup-jacinto5-v7_Dev_MibJ5_13372A, built 2013/09 / 10_12-21-17_UTC
Library: [DATE = 2013/02 / 01-08: 07: 42-WEST USER = MHupfer HOST = oekan402]
Board: 0000a239.000000c0
Command: -vvvv -p2000 -x 0xc2700000,0x01900000 -x 0x86700000,0x01900000 -wb
================================ ========
IFS: ver.300003b9 (type = 3)
UMEM: 08000000-0bffffff (F) 80000000-87ffffff (R)
ENV: @ 40313fa0 "IOC_BOOTMODE = N3B ~~~~~~~ AQ ~~~
IOC_BM_INFO = 0x40313a8c, 0x10
HW_REV = A239 C0,0x19, J5, PG3.0
LAST_RST = 0x0009
"
<8003> 39 a2 c0 00
DSPLOAD 838c0400 (1024)
========================================
RAM: 128 MB
FLASH: 64 MB @ 0x08000000
Allocing from c2700000 for 01900000
Allocing from 86700000 for 01900000
dsp_mem_count = 00000002
delaying 2000 ms for various bugs
delaying done
in pcie_init_delay
Polling for clock
pcie clock detected after delaying for approx. 1 usec.
PCIe function could be enabled
DSP: loader c674x_ipl_T10 (May 6 2015 09:47:23), args @ 838c0400 (1024)
Added GPIO callouts
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 8192x64 WB
CPU0: VFP 410330c3
CPU0: 413fc082: Cortex A8 rev 2 600MHz
setting GPIO 0
Setting GPIO0_FAL to 00,001,000
setting GPIO0_RIS to 00000004
Setting GPIO 2
Setting GPIO2_INTSET0 to 00004000
Setting GPIO2_INTSET1 to 00010000
DSP loader failed: 4294963095
IPL: A239 C0,16153A [2016-04-13 13:39:22], J5, PG3.0, GL-S = 64 (0), RAM = 128, RST = 9
CLK: 720/600/400 MHz (ARM / DSP / DDR)
IOC: 4e33427e 7e7e7e7e 7e7e4151 7e7e7e00
fb2: ARM = 8020000/2
*** WARNING: Enabling DSP access to the entire RAM!
ipl done
Startup: PL_qnx_startup-jacinto5-v7_Dev_MibJ5_13372A, built 2013/09 / 10_12-21-17_UTC
Library: [DATE = 2013/02 / 01-08: 07: 42-WEST USER = MHupfer HOST = oekan402]
Board: 0000a239.000000c0
Command: -vvvv -p2000 -x 0xc2700000,0x01900000 -x 0x86700000,0x01900000 -wb
================================== ======
IFS: ver.300003b9 (type = 3)
UMEM: 08000000-0bffffff (F) 80000000-87ffffff (R)
ENV: @ 40313fa0 "IOC_BOOTMODE = N3B ~~~~~~~ AQ ~~~
IOC_BM_INFO = 0x40313a8c, 0x10
HW_REV = A239 C0,0x19, J5, PG3.0
LAST_RST = 0x0009
"
<8003> 39 a2 c0 00
DSPLOAD DATA: 838c0400 (1024)
================ ========================
RAM: 128 MB
FLASH: 64 MB @ 0x08000000
Allocing from c2700000 for 01900000
Allocing from 86700000 for 01900000
dsp_mem_count = 00000002
delaying 2000 ms for various bugs
delaying done
in pcie_init_delay
Polling for clock
pcie clock detected after delaying for approx. 1 usec.
PCIe function could be enabled
DSP: loader c674x_ipl_T10 (May 6 2015 09:47:23), args @ 838c0400 (1024)
Added GPIO callouts
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 8192x64 WB
CPU0: VFP 410330c3
CPU0: 413fc082: Cortex A8 rev 2 600MHz
Setting GPIO 0
Setting GPIO0_FAL to 00001000
Setting GPIO0_RIS to 00000004
Setting GPIO 2
Setting GPIO2_INTSET0 to 00004000
Setting GPIO2_INTSET1 to 00010000
DSP loader failed: 4294963095