Wassertstand zum Thema Timebomb Vu+Solo2

Matz63 · 15. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Daggi Duck
Firmware flashen geht ja auch nur das bei jeden Image die Box im Starting hängt
Von Anfang an
Timebomb nach flashen auf VTI 6.08 zugeschlagen
Nur noch Power LED kein starten der Box kein Zugriff über USB oder serielle Schnittstelle
neuen Nandchip eingelötet flashen möglich Box bleibt beim starten hängen
zweiten Chip eingelotet das selbe Problem
will ich über seriell flashen setzt er IP Adresse danach kommt ERRor 21

Matthias

caliban6666 · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

@ Matze. Hmmmmm dein Log sieht wirklich schon mal viel besser aus als meins.. damit kann man sicher was anfangen.
Ich werde gerade von meinem Verkäufer ignoriert......

Daggi_Duck · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Matz63 schrieb:
...
will ich über seriell flashen setzt er IP Adresse danach kommt ERRor 21
...

Was bedeutet das genau??? Hab den Receiver ja nicht.

Andere Frage: Kann man den CFE-Bootloader gleich am Anfang stoppen, so dass er nicht automatisch ein Linux-Image versucht zu booten? Geht meist mit irgendwelchen Tasten(-Kombinatzionen) vom Terminal-Programm. Dann hätte man die CFE-Befehle für weitere Tests zur Verfügung. Welche CFE-Befehle es gibt zeigt vielleich der Befehl help oder einfach nur ? oder ähnliches an. Irgendwo im Web gab/gibt es eine Beschreibung zum (älteren) CFE-Bootloader für Broadcom Router-Chips. Könnte gut sein, dass Broadcom auch bei den Receiver-Chips daran nicht viel geändert hat.

djdragon · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Hat schon jemand neue Vu+ solo2 gekriegt ?bei welche angeblich keine Timebomb vorhanden ,und hat schon eine neue VTi 6.0.6 -. Update drivers (2014-03-10) probiert hat ?

Weil ich kriege keine eindeutige antwort von Chinese!

hi i do not suggest you download the image from otherplace
but you can try it .the box not dead now .
the Vu-hd.com is suggest
thanks!

[FONT=宋体] Best Regards
[FONT=宋体]Tike[/FONT]
[FONT=宋体][/FONT]
[FONT=宋体]Dalle Technology Co.ltd[/FONT]
[FONT=宋体]TEL:+8675525321739[/FONT]
[/FONT]

Date: 2014-05-16 14:49
To: mydalle.com
Subject: Betreff: Really no software problems more?

[TABLE="width: 100%"]
[TR]
[TD]First time, thanks for answering !

Say in different Forumen people with the update: 10/03/2014- Increase enlarge image version -> VTi 6.0.6 - update drivers (2014-03-10) is much better picture quality, the VU +.

Grants may I install this version? VTi 6.0.6 for my VU SOLO2 BCM7356 (This is new version. VU timebomp have not a problem.)?

Sie müssen registriert sein, um Links zu sehen.

On vu-hd.com page just an old version-6.0.3 OPENvti vu + Solo2
6.0.4 Drivers 17/12/2013
6.0.5 Drivers 12/24/2013
6.0.6 Drivers 3.10.2014

Thank you to advance

-------Originalmeldung-------

Von: shop
Datum: 16.05.2014 05:18:41

Really no software problems more?

hi
the new batch have not software problem
you can flash original image .but when the sync .it not sync your website.will sync to our site.
thanks!

[FONT=宋体] Best Regards
[FONT=宋体]Tike[/FONT]
[FONT=宋体][/FONT]
[FONT=宋体]Dalle Technology Co.ltd[/FONT]
[FONT=宋体]TEL:+8675525321739[/FONT]
[/FONT]

[TABLE="width: 100%"]
[TR]
[TD]I have not yet received any response, VU SOLO2 BCM7356
Order Number: 912042985
Really no software problems more? Timebomb Can I via online update no matter what update? Or just about vu-hd.com?
What a chip in it? TOSHIBA?

Thank you

[/TD]
[/TR]
[/TABLE]

[/TD]
[/TR]
[/TABLE]

djdragon · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Sonst auf vu-hd.com schon drauf der neueste BLackHole-2.0.9.1 ,welche hat schon der neueste Update Update drivers (2014-03-10)

Matz63 · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Hallo Daggi Duck
Das mit dem seriell flashen soll mit dem Programm VU-Util 2.0.1 funktionieren nur das bei mir Error 21 kommt
Über USB-Stick läuft update komplett durch nur das ich mit Hyper Terminal am Ende diese schon oben beschriebene Panic Meldung sehe

[DEBUG][2014.05.16 15:00:52] [TVuMain::do_checkup_info:396] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
machine[1], local-ip[192.168.1.200], machine-ip[192.168.1.201], file[C:\VUSOLO2\images\backup-image-vuplus-20140419_164759.nfi]
[DEBUG][2014.05.16 15:00:56] [TVuMain::rm_dir:306] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
removed directory [c:\vu_tmp]
[ INFO][2014.05.16 15:00:56] [unpack_nfi:186] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
Unpacked [c:/vu_tmp/root_cfe_auto.jffs2]
[ INFO][2014.05.16 15:00:56] [unpack_nfi:196] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
Unpacked [c:/vu_tmp/boot_cfe_auto.jffs2]
[ INFO][2014.05.16 15:01:05] [unpack_nfi:206] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
Unpacked [c:/vu_tmp/kernel_cfe_auto.bin]
[ INFO][2014.05.16 15:01:05] [unpack_nfi:219] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
Finished unpack!!
[DEBUG][2014.05.16 15:01:05] [TVuMain::btnStatusClick:460] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
unpack ok!!
[ INFO][2014.05.16 15:01:05] [TVuMain::do_patch:632] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
start write-thread [2c0]!!
[DEBUG][2014.05.16 15:01:05] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:05] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:06] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:06] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:07] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:07] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:08] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:08] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:09] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:09] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:10] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:10] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:11] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:11] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:12] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:12] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:13] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:13] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:14] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:14] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:15] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:15] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:16] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:16] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:17] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:17] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:18] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:18] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:19] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:19] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:20] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:20] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:21] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:21] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:22] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:22] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:23] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:23] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:24] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:24] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:25] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [0]
[ HEX][2014.05.16 15:01:25] [threadCommandMain:529] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 0
================== BINARY HEX ================= ==== ASCII =====
03 .
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:26] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:27] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:28] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:29] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:30] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:31] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:32] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:33] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:34] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:35] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:36] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:37] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:38] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:39] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:40] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:41] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:42] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:43] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:44] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:45] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [1]
[DEBUG][2014.05.16 15:01:46] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[ HEX][2014.05.16 15:01:46] [threadCommandMain:538] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 2
================== BINARY HEX ================= ==== ASCII =====
69 66 63 6f 6e 66 69 67 20 65 74 68 30 20 2d 61 ifconfig eth0 -a
64 64 72 3d 31 39 32 2e 31 36 38 2e 31 2e 32 30 ddr=192.168.1.20
31 20 2d 6d 61 73 6b 3d 32 35 35 2e 32 35 35 2e 1 -mask=255.255.
32 35 35 2e 30 0a 255.0.
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:47] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:48] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:49] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:50] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:51] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:52] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:53] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [2]
[DEBUG][2014.05.16 15:01:53] [TVuMain::ComTerminalChar:708] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
SUCCESS >> Setp : [2]
[DEBUG][2014.05.16 15:01:54] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [3]
[ HEX][2014.05.16 15:01:54] [threadCommandMain:554] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP > 3
================== BINARY HEX ================= ==== ASCII =====
66 6c 61 73 68 20 2d 6e 6f 68 65 61 64 65 72 20 flash -noheader
31 39 32 2e 31 36 38 2e 31 2e 32 30 30 3a 76 75 192.168.1.200:vu
5f 74 6d 70 2f 6b 65 72 6e 65 6c 5f 63 66 65 5f _tmp/kernel_cfe_
61 75 74 6f 2e 62 69 6e 20 66 6c 61 73 68 30 2e auto.bin flash0.
6b 65 72 6e 65 6c 0a kernel.
----------------------------------------------- ----------------
[DEBUG][2014.05.16 15:01:54] [tftp_start:361] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
fopen() ok!!
[DEBUG][2014.05.16 15:01:54] [tftp_start:369] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
WSAStartup() ok!!
[DEBUG][2014.05.16 15:01:54] [tftp_start:378] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
TFTP-Server started : 1348
[DEBUG][2014.05.16 15:01:54] [tftp_thread:149] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
socket() ok!!
[DEBUG][2014.05.16 15:01:54] [tftp_thread:160] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
bind() ok!!
[ INFO][2014.05.16 15:01:54] [tftp_thread:162] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
Waiting for connection..
[ INFO][2014.05.16 15:02:00] [tftp_thread:197] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
excess timeout-count!!
[DEBUG][2014.05.16 15:02:00] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
fclose()
[DEBUG][2014.05.16 15:02:00] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
CloseHandle()
[DEBUG][2014.05.16 15:02:00] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
WSACleanup()
[DEBUG][2014.05.16 15:02:01] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [3]
[DEBUG][2014.05.16 15:02:02] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
STEP : [3]
[DEBUG][2014.05.16 15:02:02] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
fclose()
[DEBUG][2014.05.16 15:02:02] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
CloseHandle()
[DEBUG][2014.05.16 15:02:02] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
WSACleanup()
[DEBUG][2014.05.16 15:02:02] [TVuMain::ComTerminalChar:722] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
FAIL >> Setp : [5], ProcessStep : [4], ErrNo : [-21]
[ INFO][2014.05.16 15:02:03] [threadCommandMain:611] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
stop write-thread!!
[ INFO][2014.05.16 15:02:03] [threadCommandMain:618] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
Closed COM1
[DEBUG][2014.05.16 15:02:12] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
fclose()
[DEBUG][2014.05.16 15:02:12] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
CloseHandle()
[DEBUG][2014.05.16 15:02:12] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
WSACleanup()
[DEBUG][2014.05.16 15:02:13] [TVuMain::rm_dir:306] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
removed directory [c:\vu_tmp]

Matthias

Daggi_Duck · 16. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Sind diese Meldungen:

Code:

[DEBUG][2014.05.16 15:00:52] [TVuMain::do_checkup_info:396] [[B][COLOR="#0000FF"]C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t[/COLOR][/B]\Vu\src\FormVuMain.cpp]
 machine[1], local-ip[192.168.1.200], machine-ip[192.168.1.201], file[[B][COLOR="#0000FF"]C:\VUSOLO2\images\backup-image-vuplus-20140419_164759.nfi[/COLOR][/B]]
 [DEBUG][2014.05.16 15:00:56] [TVuMain::rm_dir:306] [[B][COLOR="#0000FF"]C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t[/COLOR][/B]\Vu\src\FormVuMain.cpp]
 removed directory [c:\vu_tmp]
 ...
 STEP : [3]
 [ HEX][2014.05.16 15:01:54] [threadCommandMain:554] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 STEP > 3
 ================== BINARY HEX ================= ==== ASCII =====
 66 6c 61 73 68 20 2d 6e 6f 68 65 61 64 65 72 20 flash -noheader 
 31 39 32 2e 31 36 38 2e 31 2e 32 30 30 3a 76 75 192.168.1.200:vu
 5f 74 6d 70 2f 6b 65 72 6e 65 6c 5f 63 66 65 5f _tmp/kernel_cfe_
 61 75 74 6f 2e 62 69 6e 20 66 6c 61 73 68 30 2e auto.bin flash0.
 6b 65 72 6e 65 6c 0a kernel.
 ----------------------------------------------- ----------------
 [DEBUG][2014.05.16 15:01:54] [B][COLOR="#0000FF"][tftp_start:361] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t[/COLOR][/B]\Vu\lib\tftpthread.cpp]
 fopen() ok!!
 [DEBUG][2014.05.16 15:01:54] [tftp_start:369] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 WSAStartup() ok!!
 [DEBUG][2014.05.16 15:01:54] [tftp_start:378] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 TFTP-Server started : 1348
 [DEBUG][2014.05.16 15:01:54] [tftp_thread:149] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 socket() ok!!
 [DEBUG][2014.05.16 15:01:54] [tftp_thread:160] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 bind() ok!!
 [ INFO][2014.05.16 15:01:54] [tftp_thread:162] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 Waiting for connection..
 [ INFO][2014.05.16 15:02:00] [tftp_thread:197] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 excess timeout-count!!
 [DEBUG][2014.05.16 15:02:00] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 fclose()
 [DEBUG][2014.05.16 15:02:00] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 CloseHandle()
 [DEBUG][2014.05.16 15:02:00] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 WSACleanup()
 [DEBUG][2014.05.16 15:02:01] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 STEP : [3]
 [DEBUG][2014.05.16 15:02:02] [threadCommandMain:518] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 STEP : [3]
 [DEBUG][2014.05.16 15:02:02] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 fclose()
 [DEBUG][2014.05.16 15:02:02] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 CloseHandle()
 [DEBUG][2014.05.16 15:02:02] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 WSACleanup()
 [DEBUG][2014.05.16 15:02:02] [TVuMain::ComTerminalChar:722] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 FAIL >> Setp : [5], ProcessStep : [4], ErrNo : [-21]
 [ INFO][2014.05.16 15:02:03] [threadCommandMain:611] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 stop write-thread!!
 [ INFO][2014.05.16 15:02:03] [threadCommandMain:618] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 Closed COM1
 [DEBUG][2014.05.16 15:02:12] [tftp_stop:389] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 fclose()
 [DEBUG][2014.05.16 15:02:12] [tftp_stop:392] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 CloseHandle()
 [DEBUG][2014.05.16 15:02:12] [tftp_stop:395] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\lib\tftpthread.cpp]
 WSACleanup()
 [DEBUG][2014.05.16 15:02:13] [TVuMain::rm_dir:306] [C:\Documents and Settings\¡îã$┴-\╝ðı ÍT║t\Vu\src\FormVuMain.cpp]
 removed directory [c:\vu_tmp]
...

mit diesen Verzeichnis-Namen normal??? Woher stammen überhaupt diese Meldungen, vom Flashen über USB oder per RS-232??? Bei letzterem könnte es ein Problem sein, dass das verwendete Verzeichnis C:\Documents and Settings\... Leerzeichen enthält.

L0co · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Auf Hd-vu Webseite sind einige Images dazu gekommen.
unteranderem blackhole 2.1.1 und noch andere für solo2

Xerolux · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Die Frage ist sind die Clone Safe für die V2 Boxen?

reini12 · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Meine Vermutung ist, dass die die Images fixen und sie dann auf der Seite veröffentlichen. Deshalb vielleicht auch die neuen Images.

Beste Grüsse
reini12

L0co · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Alles was da zur Verfügung steht ist Save ... Nur leider wird es vermutlich kein aktuelles VTI geben. Außer die die als Save gelten. Wer weiß was die in den Images noch alles eingebaut haben. Allerdings wer die Images lesen und verstehen kann sollte eine timebomb eigentlich raus lesen können

reini12 · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Soweit mein Information richtig ist, ist die TB ja durch ein Treiberupdate gekommen. Wenn man nun ein aktuelles Image nimmt, aber die alten Treiber einbaut könnte es gehen. Frage ist nur ob das überhaupt geht. Was wurde außer der TB noch zu dem Zeitpunkt an bugs behoben? Bei manchen Images oder fast allen, kann man ja auch den einen oder anderen Treiber manuell nachinstallieren, also könnte es doch auch sein das man den einen oder anderen Treiber weglässt.

Beste Grüsse
reini12

kulant · 17. Mai 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Beim VTI kann man den Treiber über das VTI Panel wechseln, so habe ich es ja auch gemacht.

Raucherdackel · 2. Juni 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Ich habe meine Box vom Boardsponsor letzte Woche wieder bekommen. ich habe vti 6.0.3 geflasht, danach 6.0.8 von vu-hd geflasht (update). Sendersuchlauf gemacht, und dann war die box wieder gebrickt.

Also: ohne Update von V2 auf V3 sind die neuen Images von Vu-HD nicht safe!!!

without update from V2 to V3, the new images from vu-hd are definitely not safe!

Phantom · 2. Juni 2014

AW: Wassertstand zum Thema Timebomb Vu+Solo2

Das Update auf V3 ist auch die Voraussetzung für diese Images .

Wassertstand zum Thema Timebomb Vu+Solo2

Matz63

Ist gelegentlich hier

caliban6666

Newbie

Daggi_Duck

Elite Lord

djdragon

Ist gelegentlich hier

djdragon

Ist gelegentlich hier

Matz63

Ist gelegentlich hier

Daggi_Duck

Elite Lord

L0co

Spezialist

Xerolux

Guest

reini12

L0co

Spezialist

reini12

kulant

Ist gelegentlich hier

Raucherdackel

Newbie

Phantom

Ähnliche Themen

Wassertstand zum Thema Timebomb Vu+Solo2

Ist gelegentlich hier

Newbie

Elite Lord

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Elite Lord

Spezialist

Xerolux

Guest

Spezialist

Ist gelegentlich hier

Newbie

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz