Support Synology USB Easymouse - Ich verzweifel

[tschabippe]

AW: Synology USB Easymouse - Ich verzweifel

/dev/ttyS0 habe ich einfach mal eingegeben und probiert, er findet aber keine Karte...
Error getting card status wie bei dir, kommt bei mir garnicht...



habs hinbekommen...aktuelles binary und die aktuellen USB Serial Treiber SPK's gefunden, draufgespielt, konfiguriert, läuft ;-)

 

[beauty]

AW: Synology USB Easymouse - Ich verzweifel

Nimloth hat eine Oscam Version kompiliert für jede Synology. Kann als Paketquelle hinzugefügt werden. Einfach Paket installieren, und sich freuen das es läuft ohne gross rumgefummele.

 

[Blackcadillac]

AW: Synology USB Easymouse - Ich verzweifel

/dev/ttyS0 habe ich einfach mal eingegeben und probiert, er findet aber keine Karte...
Error getting card status wie bei dir, kommt bei mir garnicht...



habs hinbekommen...aktuelles binary und die aktuellen USB Serial Treiber SPK's gefunden, draufgespielt, konfiguriert, läuft ;-)

teilen macht Spaß, mein lieber!

 

[Blackcadillac]

AW: Synology USB Easymouse - Ich verzweifel

Nimloth hat eine Oscam Version kompiliert für jede Synology. Kann als Paketquelle hinzugefügt werden. Einfach Paket installieren, und sich freuen das es läuft ohne gross rumgefummele.

Also für keine meiner Diskstations funktioniert das. Es lässt sich nichtmal runterladen. Ich würde sagen, die Modellauswahl dort ist eher eingeschränkt auf Armade Xp und Armade 370 Prozessorarchitekturen

EDIT: Hat sich erledigt, läuft jetzt alles KDG und Sky inkl. HD bei 300ms

 

[sectorchan]

AW: Synology USB Easymouse - Ich verzweifel

Ich weiß, es ist nun fast n Jahr her, aber ich möchte nun auch meine DS mit Oscar versehen.
Hat jemand die Paketquelle wovon beauty sprach?

 

[krikssus]

AW: Synology USB Easymouse - Ich verzweifel

ich würde jetzt ja gerne den typischen link ala " lass mich das für dich googeln verwenden" aber so leicht gehts ja auch nicht.
Bei Suche nach oscam synology , 2tes ergebnis und im thread dort die letzte Seite.

 

[Erdapfel]

AW: Synology USB Easymouse - Ich verzweifel - ich auch!

Liebe Profis,

wie der Themenstarter bin ich auch am Verzweifeln :-(
Ich habe wirklich viel gelesen und probiert - und so glaube ich auch einige Teilerfolge erreicht - nicht aber das Ziel erreicht.
Meine Ausgangssituation Synology DS 212 (DSM5.2), EASYMOUSE2 Premium, ORF-Irdeto Karte

OSCAM habe ich aus einem SPK installieren können - es läuft das WEBIF und auch das Log-File ist ersichtlich.
USB-Treiber habe ich 2 Pakete installiert (usb-driver-kernel-2.6.32-mfr-1.0-syno-88f628x.spk und UsbSerialDrivers_3.0.9.spk)

lsusb hatte ich danach noch immer nicht zur Verfügung.
Also verwendete ich das Script von "supraracer" -THX
-Die Freude war groß als ich als die Serial fand.
Diese habe ich dann bei device= eingetragen:


label = ORF_irdeto
description = IRDETO
enable = 0
protocol = mouse
device = serial:A9047U2A
caid = 0648
boxkey = 11xxxxxxxxxxx88
detect = cd
group = 1

Die letzten Zeilen des log-files von OSCAM sehen so aus:

• 2016/01/14 21:13:11 4FFB1755 h (webif) Refresh Readers requested by WebIF from 192.168.0.236
• 2016/01/14 21:13:13 4FFB1755 h (config) readerdb 1 readers freed
• 2016/01/14 21:13:13 4FFB1755 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

Ich will nicht aufgeben - aber ohne weitere Hilfe bin ich am Ende.
In der Hoffnung um neue Hinweise bitte ich zu beachten dass meine Linuxkenntnisse sehr bescheiden sind

Zusatzinfos:

• uname -a

Spoiler

Linux DS212 2.6.32.12 #5644 Wed Oct 28 12:36:45 CST 2015 armv5tel GNU/Linux synology_88f6282_212

• lsmod

Spoiler

Module Size Used by Tainted: P
cp210x 10614 0
ch341 7322 0
pl2303 14045 0
cdc_acm 12675 0
ftdi_sio 30208 0
usbserial 26550 4 cp210x,ch341,pl2303,ftdi_sio
ipt_MASQUERADE 1416 1
ipt_REDIRECT 917 0
iptable_nat 3276 1
nf_nat 11383 3 ipt_MASQUERADE,ipt_REDIRECT,iptable_nat
tun 10550 2
snd_usb_hiface 6817 0
snd_pcm_oss 34198 0
snd_mixer_oss 12814 1 snd_pcm_oss
snd_usb_audio 75745 0
snd_pcm 56712 3 snd_usb_hiface,snd_pcm_oss,snd_usb_audio
snd_timer 15399 1 snd_pcm
snd_hwdep 5113 1 snd_usb_audio
snd_usbmidi_lib 15754 1 snd_usb_audio
snd_rawmidi 15422 1 snd_usbmidi_lib
snd_seq_device 4959 1 snd_rawmidi
snd 39738 10 snd_usb_hiface,snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq_device
snd_page_alloc 4599 1 snd_pcm
soundcore 4200 1 snd
nfsd 236295 7
exportfs 2878 1 nfsd
cifs 203815 0
udf 77639 0
isofs 29343 0
loop 11022 0
usbhid 22863 0
hid 36913 1 usbhid
usblp 9186 0
usb_storage 37102 0
etxhci_hcd 62273 0
ohci_hcd 16271 0
ds212_synobios 34008 0
sky2 35981 0
ip6t_LOG 4573 0
nf_conntrack_ipv6 9310 2
synoacl_vfs 12197 1
ip6table_filter 1049 1
hfsplus 83678 0
fuse 51895 0
vfat 8139 0
fat 42217 1 vfat
arc4 1036 0
xt_geoip 2708 0
compat_xtables 3354 1 xt_geoip
ip6_tables 9278 3 ip6t_LOG,ip6table_filter,compat_xtables
xt_iprange 1446 0
xt_limit 1286 5
xt_state 1093 4
xt_tcpudp 2105 20
xt_multiport 2349 16
ipt_LOG 4449 0
nf_conntrack_ipv4 4647 5 iptable_nat,nf_nat
nf_defrag_ipv4 905 1 nf_conntrack_ipv4
nf_conntrack 40194 6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv6,xt_state,nf_conntrack_ipv4
iptable_filter 1192 1
ip_tables 8405 2 iptable_nat,iptable_filter
cryptosoft 10983 0
x_tables 10189 13 ipt_MASQUERADE,ipt_REDIRECT,iptable_nat,ip6t_LOG,compat_xtables,ip6_tables,xt_iprange,xt_limit,xt_state,xt_tcpudp,xt_multiport,ipt_LOG,ip_tables
ecryptfs 84607 0
sha512_generic 9723 0
sha256_generic 8547 0
sha1_generic 1697 0
ecb 1735 0
cesa_ocf_drv 6851 0
cesa_dev 1929 0
authenc 5564 0
cryptodev 10456 23
ocf 16876 4 cryptosoft,ecryptfs,cesa_ocf_drv,cryptodev
crc32c 2530 0
ansi_cprng 3219 0
aes_generic 27544 0
cpufreq_powersave 680 0
cpufreq_performance 684 1
cpufreq 1637 0
cpufreq_stats 2059 0
freq_table 2033 2 cpufreq,cpufreq_stats
dm_snapshot 19492 0
crc_itu_t 1043 1 udf
crc_ccitt 1065 0
quota_v2 2527 2
quota_tree 6305 1 quota_v2
psnap 1551 0
llc 3034 1 psnap
sit 8310 0
tunnel4 1967 1 sit
ipv6 240420 104 nf_conntrack_ipv6,sit
sg 20107 0
xhci_hcd 55286 0
ehci_hcd 31532 0
usbcore 136085 17 cp210x,ch341,pl2303,cdc_acm,ftdi_sio,usbserial,snd_usb_hiface,snd_usb_audio,snd_usbmidi_lib,usbhid,usblp,usb_storage,etxhci_hcd,ohci_hcd,xhci_hcd,ehci_hcd

• dmesg

Spoiler

[ 0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #5644 Wed Oct 28 12:36:45 CST 2015
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Synology 6282 board
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] Sys Clk = 200000000, Tclk = 166666667
[ 0.000000] Synology Board ID: 27
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c03f1968, node_mem_map c0c01000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS212v10 ihd_num=2 netif_num=1
[ 0.000000] Synology Hardware Version: DS212v10-j
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 244992KB available (3644K code, 519K data, 124K init, 0K highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240)
[ 0.240000] Mount-cache hash table entries: 512
[ 0.240000] CPU: Testing write buffer coherency: ok
[ 0.240000] devtmpfs: initialized
[ 0.240000] xor: measuring software checksum speed
[ 0.290000] arm4regs : 1448.400 MB/sec
[ 0.340000] 8regs : 869.200 MB/sec
[ 0.390000] 32regs : 1122.000 MB/sec
[ 0.390000] xor: using function: arm4regs (1448.400 MB/sec)
[ 0.390000] NET: Registered protocol family 16
[ 0.390000] Feroceon L2: Enabling L2
[ 0.390000] Feroceon L2: Cache support initialised, in WT override mode.
[ 0.410000]
[ 0.410000] CPU Interface
[ 0.410000] -------------
[ 0.410000] SDRAM_CS0 ....base 00000000, size 256MB
[ 0.410000] SDRAM_CS1 ....disable
[ 0.410000] SDRAM_CS2 ....disable
[ 0.410000] SDRAM_CS3 ....disable
[ 0.410000] PEX0_MEM ....base e0000000, size 128MB
[ 0.410000] PEX0_IO ....base f2000000, size 1MB
[ 0.410000] PEX1_MEM ....base e8000000, size 128MB
[ 0.410000] PEX1_IO ....base f2100000, size 1MB
[ 0.410000] INTER_REGS ....base f1000000, size 1MB
[ 0.410000] NFLASH_CS ....base fa000000, size 2MB
[ 0.410000] SPI_CS ....base f4000000, size 16MB
[ 0.410000] BOOT_ROM_CS ....no such
[ 0.410000] DEV_BOOTCS ....no such
[ 0.410000] CRYPT_ENG ....base f0000000, size 2MB
[ 0.410000] Detected Tclk 200000000 and SysClk 533333333
[ 0.410000] Apply DS 212 GPIO
[ 0.410000] Synology 6282 1, 2 bay GPIO Init
[ 0.910000] PEX0 interface detected no Link.
[ 1.410000] PEX1 interface detected Link X1
[ 1.410000] PCI: bus0: Fast back to back transfers enabled
[ 1.410000] pci 0000:01:01.0: reg 10 64bit mmio: [0x98000000-0x98001fff]
[ 1.410000] pci 0000:01:01.0: PME# supported from D0 D3hot
[ 1.410000] pci 0000:01:01.0: PME# disabled
[ 1.410000] PCI: bus1: Fast back to back transfers disabled
[ 1.420000] bio: create slab <bio-0> at 0
[ 1.420000] vgaarb: loaded
[ 1.420000] SCSI subsystem initialized
[ 1.420000] libata version 3.00 loaded.
[ 1.590000] raid6: int32x1 126 MB/s
[ 1.760000] raid6: int32x2 185 MB/s
[ 1.930000] raid6: int32x4 180 MB/s
[ 2.100000] raid6: int32x8 193 MB/s
[ 2.100000] raid6: using algorithm int32x8 (193 MB/s)
[ 2.100000] Switching to clocksource kw_clocksource
[ 2.100000] NET: Registered protocol family 2
[ 2.100000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.100000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.100000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 2.100000] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.100000] TCP reno registered
[ 2.100000] NET: Registered protocol family 1
[ 2.100000] RPC: Registered udp transport module.
[ 2.100000] RPC: Registered tcp transport module.
[ 2.100000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.100000] Trying to unpack rootfs image as initramfs...
[ 3.070000] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 3.080000] Freeing initrd memory: 4096K
[ 3.080000] XOR registered 4 channels
[ 3.080000] XOR 2nd invalidate WA enabled
[ 3.080000] VFS: Disk quotas dquot_6.5.2
[ 3.080000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.090000] msgmni has been set to 486
[ 3.090000] alg: No test for md5 (md5-generic)
[ 3.090000] alg: No test for des (des-generic)
[ 3.090000] alg: No test for des3_ede (des3_ede-generic)
[ 3.090000] alg: No test for stdrng (krng)
[ 3.090000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 3.090000] io scheduler noop registered
[ 3.090000] io scheduler anticipatory registered (default)
[ 3.090000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.090000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 3.100000] console [ttyS0] enabled
[ 3.110000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
[ 3.120000] brd: module loaded
[ 3.120000] sata_mv sata_mv.0: version 1.28
[ 3.130000] sata_mv sata_mv.0: slots 32 ports 2
[ 3.130000] scsi0 : sata_mv
[ 3.140000] scsi1 : sata_mv
[ 3.140000] ata1: SATA max UDMA/133 irq 21
[ 3.140000] ata2: SATA max UDMA/133 irq 21
[ 11.690000] ata1: link is slow to respond, please be patient (ready=0)
[ 13.970000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 13.990000] ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 13.990000] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 14.020000] ata1.00: configured for UDMA/133
[ 14.040000] scsi 0:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 14.040000] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 14.050000] sd 0:0:0:0: [sda] Write Protect is off
[ 14.060000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.060000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.070000] sda: sda1 sda2 sda3
[ 14.080000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.080000] Delay 5 seconds to wait for disk 2 ready.
[ 24.810000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 24.830000] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 24.830000] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 24.860000] ata2.00: configured for UDMA/133
[ 24.880000] scsi 1:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 24.880000] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 24.890000] sd 1:0:0:0: [sdb] Write Protect is off
[ 24.900000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 24.900000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.910000] sdb: sdb1 sdb2 sdb3
[ 24.920000] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 24.930000] physmap platform flash device: 00400000 at f8000000
[ 24.940000] SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)
[ 24.950000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000
[ 24.960000] 6 RedBoot partitions found on MTD device SYNOMTD-0
[ 24.960000] SYNOMTD flash bank 0: Using RedBoot partition definition
[ 24.970000] Creating 6 MTD partitions on "SYNOMTD-0":
[ 24.980000] 0x000000000000-0x000000080000 : "RedBoot"
[ 24.980000] 0x000000080000-0x000000280000 : "zImage"
[ 24.990000] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 24.990000] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 25.000000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.000000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.010000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.020000] serial number='BAK3N06194'
[ 25.020000] 0x0000003d0000-0x0000003f0000 : "RedBoot Config"
[ 25.030000] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 25.030000] SPI Serial flash detected @ 0xf4000000, 4096KB (64sec x 64KB)
[ 25.040000] cmdlinepart partition parsing not available
[ 25.050000] Loading Marvell Ethernet Driver:
[ 25.050000] o Cached descriptors in DRAM
[ 25.060000] o DRAM SW cache-coherency
[ 25.060000] o 2 Giga ports supported
[ 25.060000] o Single RX Queue support - ETH_DEF_RXQ=0
[ 25.070000] o Single TX Queue support - ETH_DEF_TXQ=0
[ 25.070000] o TCP segmentation offload (TSO) supported
[ 25.080000] o Receive checksum offload supported
[ 25.080000] o Transmit checksum offload supported
[ 25.090000] o SKB Recycle supported - (Enabled)
[ 25.090000] o Rx descripors: q0=128
[ 25.100000] o Tx descripors: q0=532
[ 25.100000] o Loading network interface(s):
[ 25.110000] o register under mv88fx_eth platform
[ 25.110000] o eth0, ifindex = 2, GbE port = 0
[ 25.120000] o eth0, phy chipid = 1410e90, Support WOL = 32
[ 25.120000]
[ 25.120000] md: linear personality registered for level -1
[ 25.130000] md: raid0 personality registered for level 0
[ 25.130000] md: raid1 personality registered for level 1
[ 25.140000] md: raid10 personality registered for level 10
[ 25.150000] md: raid6 personality registered for level 6
[ 25.150000] md: raid5 personality registered for level 5
[ 25.160000] md: raid4 personality registered for level 4
[ 25.160000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 25.170000] cpuidle: using governor ladder
[ 25.170000] TCP cubic registered
[ 25.180000] NET: Registered protocol family 17
[ 25.180000] NET: Registered protocol family 15
[ 25.190000] registered taskstats version 1
[ 25.190000] md: Waiting for all devices to be available before autodetect
[ 25.200000] md: If you don't use raid, use raid=noautodetect
[ 25.200000] md: Autodetecting RAID arrays.
[ 25.260000] md: invalid raid superblock magic on sda3
[ 25.270000] md: sda3 does not have a valid v0.90 superblock, not importing!
[ 25.330000] md: invalid raid superblock magic on sdb3
[ 25.330000] md: sdb3 does not have a valid v0.90 superblock, not importing!
[ 25.340000] md: Scanned 6 and added 4 devices.
[ 25.340000] md: autorun ...
[ 25.350000] md: considering sda1 ...
[ 25.350000] md: adding sda1 ...
[ 25.350000] md: sda2 has different UUID to sda1
[ 25.360000] md: adding sdb1 ...
[ 25.360000] md: sdb2 has different UUID to sda1
[ 25.370000] md: created md0
[ 25.370000] md: bind<sdb1>
[ 25.370000] md: bind<sda1>
[ 25.370000] md: running: <sda1><sdb1>
[ 25.380000] raid1: raid set md0 active with 2 out of 2 mirrors
[ 25.380000] md0: detected capacity change from 0 to 2549940224
[ 25.390000] md: considering sda2 ...
[ 25.390000] md: adding sda2 ...
[ 25.400000] md: adding sdb2 ...
[ 25.400000] md: created md1
[ 25.400000] md: bind<sdb2>
[ 25.410000] md: bind<sda2>
[ 25.410000] md: running: <sda2><sdb2>
[ 25.410000] raid1: raid set md1 active with 2 out of 2 mirrors
[ 25.420000] md1: detected capacity change from 0 to 2147418112
[ 25.430000] md: ... autorun DONE.
[ 25.430000] RAMDISK: lzma image found at block 0
[ 26.480000] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 26.700000] usbcore: registered new interface driver usbfs
[ 26.700000] usbcore: registered new interface driver hub
[ 26.730000] usbcore: registered new interface driver ethub
[ 26.730000] usbcore: registered new device driver usb
[ 26.800000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 26.810000] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 26.810000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 26.850000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 26.870000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 26.870000] usb usb1: configuration #1 chosen from 1 choice
[ 26.900000] hub 1-0:1.0: USB hub found
[ 26.900000] hub 1-0:1.0: 1 port detected
[ 27.000000] xhci_hcd 0000:01:01.0: xHCI Host Controller
[ 27.010000] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2
[ 27.020000] xhci_hcd 0000:01:01.0: irq 10, io mem 0xe8000000
[ 27.030000] usb usb2: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 27.060000] usb usb2: configuration #1 chosen from 1 choice
[ 27.060000] xHCI xhci_add_endpoint called for root hub
[ 27.060000] xHCI xhci_check_bandwidth called for root hub
[ 27.060000] hub 2-0:1.0: USB hub found
[ 27.060000] hub 2-0:1.0: 4 ports detected
[ 27.100000] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 27.160000] ds212_synobios: module license 'Synology Inc.' taints kernel.
[ 27.170000] Disabling lock debugging due to kernel taint
[ 27.220000] correction with 0x0f
[ 27.270000] 2016-1-13 19:57:58 UTC
[ 27.280000] synobios: load, major number 201
[ 27.280000] Brand: Synology
[ 27.290000] Model: DS-212
[ 27.290000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 27.300000] synobios cpu_arch proc entry initialized
[ 27.300000] synobios crypto_hw proc entry initialized
[ 27.310000] synobios syno_platform proc entry initialized
[ 27.310000] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 27.340000] synobios: unload
[ 27.400000] md0: unknown partition table
[ 27.470000] Got empty serial number. Generate serial number from product.
[ 27.470000] usb 1-1: configuration #1 chosen from 1 choice
[ 27.500000] hub 1-1:1.0: USB hub found
[ 27.500000] hub 1-1:1.0: 4 ports detected
[ 27.510000] hub 2-0:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 29.590000] usb 2-3: new full speed USB device using xhci_hcd and address 2
[ 29.630000] Got empty serial number. Generate serial number from product.
[ 29.640000] usb 2-3: configuration #1 chosen from 1 choice
[ 29.660000] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 29.800000] usb 1-1.3: new full speed USB device using orion-ehci and address 3
[ 29.910000] usb 1-1.3: configuration #1 chosen from 1 choice
[ 29.930000] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 30.050000] usb 1-1.4: new high speed USB device using orion-ehci and address 4
[ 30.060000] EXT4-fs (md0): barriers disabled
[ 30.080000] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 30.160000] usb 1-1.4: configuration #1 chosen from 1 choice
[ 32.530000] EXT3-fs: md0: couldn't mount because of unsupported optional features (240).
[ 32.530000] EXT2-fs: md0: couldn't mount because of unsupported optional features (240).
[ 32.540000] EXT4-fs (md0): barriers disabled
[ 32.550000] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 32.550000] VFS: Mounted root (ext4 filesystem) on device 9:0.
[ 32.560000] Trying to move old root to /initrd ... okay
[ 32.570000] Freeing init memory: 124K
[ 37.950000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.950000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 38.420000] md1: unknown partition table
[ 38.500000] Adding 2097080k swap on /dev/md1. Priority:-1 extents:1 across:2097080k
[ 39.050000] init: syno-auth-check main process (1128) killed by TERM signal
[ 39.300000] init: php-fpm pre-start process (1117) terminated with status 1
[ 40.190000] <30>systemd-udevd[1285]: starting version 204
[ 40.390000] NET: Registered protocol family 10
[ 40.390000] lo: Disabled Privacy Extensions
[ 41.460000] IPv6 over IPv4 tunneling driver
[ 41.460000] sit0: Disabled Privacy Extensions
[ 46.600000] cpufreq: Init kirkwood cpufreq driver
[ 46.610000] cpufreq: High frequency: 1600000KHz - Low frequency: 533333KHz
[ 49.020000] alg: No test for aes (aes-generic)
[ 49.460000] alg: No test for stdrng (ansi_cprng)
[ 49.780000] alg: No test for crc32c (crc32c-generic)
[ 51.570000] cesadev_init(bf16b000)
[ 51.850000] mvCesaInit: sessions=10240, queue=64, pSram=f0000000
[ 52.300000] alg: No test for sha1 (sha1-generic)
[ 52.390000] alg: No test for sha224 (sha224-generic)
[ 52.390000] alg: No test for sha256 (sha256-generic)
[ 52.510000] alg: No test for sha384 (sha384-generic)
[ 52.510000] alg: No test for sha512 (sha512-generic)
[ 52.630000] encryptfs using the OCF package.
[ 52.760000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 53.020000] nf_conntrack version 0.5.0 (3897 buckets, 15588 max)
[ 53.670000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 53.770000] alg: No test for arc4 (arc4-generic)
[ 53.990000] fuse init (API version 7.13)
[ 54.490000] sky2 driver version 1.25
[ 54.620000] correction with 0x0f
[ 54.680000] 2016-1-13 19:58:26 UTC
[ 54.680000] synobios: load, major number 201
[ 54.690000] Brand: Synology
[ 54.690000] Model: DS-212
[ 54.690000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 54.700000] synobios cpu_arch proc entry initialized
[ 54.710000] synobios crypto_hw proc entry initialized
[ 54.710000] synobios syno_platform proc entry initialized
[ 56.280000] eth0: mac address changed
[ 58.420000] eth0: link down
[ 58.430000] eth0: started
[ 58.490000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 59.990000] eth0: link up, full duplex, speed 1 Gbps
[ 59.990000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 69.780000] md: md2 stopped.
[ 70.040000] md: bind<sdb3>
[ 70.050000] md: bind<sda3>
[ 70.120000] md2: detected capacity change from 0 to 3991126802432
[ 70.290000] md2: unknown partition table
[ 78.040000] EXT4-fs (md2): barriers disabled
[ 78.350000] EXT4-fs (md2): mounted filesystem with writeback data mode
[ 83.700000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 84.390000] ata1.00: configured for UDMA/133
[ 84.390000] ata1: EH complete
[ 84.430000] Initializing USB Mass Storage driver...
[ 84.470000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 84.480000] usbcore: registered new interface driver usb-storage
[ 84.480000] USB Mass Storage support registered.
[ 84.490000] ata2.00: configured for UDMA/133
[ 84.490000] ata2: EH complete
[ 84.500000] usb-storage: device found at 4
[ 84.500000] usb-storage: waiting for device to settle before scanning
[ 84.650000] usbcore: registered new interface driver usblp
[ 85.000000] usbcore: registered new interface driver hiddev
[ 85.010000] input: C-Media USB Audio Device as /devices/pci0000:01/0000:01:01.0/usb2/2-3/2-3:1.3/input/input0
[ 85.020000] Get empty minor:104
[ 85.020000] generic-usb 0003:0D8C:000C.0001: input,hiddev104: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-0000:01:01.0-3/input3
[ 85.030000] usbcore: registered new interface driver usbhid
[ 85.030000] usbhid: v2.6:USB HID core driver
[ 88.610000] ata1.00: configured for UDMA/133
[ 88.610000] ata1: EH complete
[ 89.020000] ata2.00: configured for UDMA/133
[ 89.020000] ata2: EH complete
[ 89.520000] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9910 PQ: 0 ANSI: 0
[ 89.530000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 89.550000] sd 2:0:0:0: [sdq] Attached SCSI removable disk
[ 89.560000] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9910 PQ: 0 ANSI: 0
[ 89.570000] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 89.580000] sd 2:0:0:1: [sdr] Attached SCSI removable disk
[ 89.610000] usb-storage: device scan complete
[ 104.150000] loop: module loaded
[ 106.420000] Slow work thread pool: Starting up
[ 107.090000] Slow work thread pool: Ready
[ 109.650000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 113.440000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 113.450000] NFSD: starting 90-second grace period
[ 115.120000] init: smbd main process (8606) killed by HUP signal
[ 115.120000] init: smbd main process ended, respawning
[ 132.110000] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 145.800000] usbcore: registered new interface driver snd-usb-audio
[ 146.000000] usbcore: registered new interface driver snd-usb-hiface
[ 188.180000] warning: `named' uses 32-bit capabilities (legacy support in use)
[ 363.200000] tun: Universal TUN/TAP device driver, 1.6
[ 363.200000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 369.830000] tun0: Disabled Privacy Extensions
[ 403.560000] usbcore: registered new interface driver usbserial
[ 403.570000] usbserial: USB Serial Driver core
[ 403.700000] USB Serial support registered for FTDI USB Serial Device
[ 403.700000] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 403.710000] usb 1-1.3: Detected FT232RL
[ 403.710000] usb 1-1.3: Number of endpoints 2
[ 403.720000] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 403.720000] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 403.730000] usb 1-1.3: Setting MaxPacketSize 64
[ 403.840000] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 403.840000] usbcore: registered new interface driver ftdi_sio
[ 403.850000] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 406.720000] usbcore: registered new interface driver cdc_acm
[ 406.720000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 406.810000] USB Serial support registered for pl2303
[ 406.820000] usbcore: registered new interface driver pl2303
[ 406.820000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 441.750000] eth0: link down
[ 441.760000] eth0: link up, full duplex, speed 1 Gbps
[ 825.200000] usbcore: deregistering interface driver ftdi_sio
[ 825.210000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 825.210000] ftdi_sio 1-1.3:1.0: device disconnected
[ 825.220000] USB Serial deregistering driver FTDI USB Serial Device
[ 917.980000] usbcore: deregistering interface driver cdc_acm
[ 918.160000] usbcore: deregistering interface driver pl2303
[ 918.170000] USB Serial deregistering driver pl2303
[ 918.300000] usbcore: deregistering interface driver usbserial
[ 931.410000] usbcore: registered new interface driver usbserial
[ 931.420000] USB Serial support registered for generic
[ 931.420000] usbcore: registered new interface driver usbserial_generic
[ 931.430000] usbserial: USB Serial Driver core
[ 931.610000] USB Serial support registered for FTDI USB Serial Device
[ 931.620000] usbcore: registered new interface driver ftdi_sio
[ 931.630000] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 931.880000] usbcore: registered new interface driver cdc_acm
[ 931.880000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 932.040000] USB Serial support registered for pl2303
[ 932.050000] usbcore: registered new interface driver pl2303
[ 932.050000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 1059.380000] USB Serial support registered for ch341-uart
[ 1059.380000] usbcore: registered new interface driver ch341
[ 1059.600000] USB Serial support registered for cp210x
[ 1059.610000] usbcore: registered new interface driver cp210x
[ 1059.610000] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[82252.470000] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[82252.470000] usb 1-1.3: USB disconnect, address 3
[82256.310000] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[82256.560000] usb 1-1.3: new full speed USB device using orion-ehci and address 5
[82256.770000] usb 1-1.3: configuration #1 chosen from 1 choice
[83534.770000] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[83534.800000] usb 1-1.3: USB disconnect, address 5
[83536.310000] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[83536.550000] usb 1-1.3: new full speed USB device using orion-ehci and address 6
[83536.660000] usb 1-1.3: configuration #1 chosen from 1 choice
[83702.710000] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[83702.710000] usb 1-1.3: USB disconnect, address 6
[83704.500000] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[83704.750000] usb 1-1.3: new full speed USB device using orion-ehci and address 7
[83704.860000] usb 1-1.3: configuration #1 chosen from 1 choice
[86654.130000] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[86654.160000] usb 1-1.3: USB disconnect, address 7
[87194.290000] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[87194.540000] usb 1-1.3: new full speed USB device using orion-ehci and address 8
[87194.650000] usb 1-1.3: configuration #1 chosen from 1 choice
[87313.070000] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[87313.120000] usb 1-1.3: USB disconnect, address 8
[87316.140000] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[87316.490000] usb 1-1.3: new full speed USB device using orion-ehci and address 9
[87316.600000] usb 1-1.3: configuration #1 chosen from 1 choice

Danke schon mal im Voraus


Schubi.

 

[sectorchan]

Ich habe das auch nicht zum laufen gebracht mit einem raspi war alles ruckizucki installiert und auch stabil gelaufen.

Ich würde mich auch freuen wenn jemand das zum laufen bekommt.


Sent from my iPhone using Tapatalk

 

[brainstorm1]

AW: Synology USB Easymouse - Ich verzweifel

Hallo,

ich habe für meine DS 713+ auf dieser Seite

Sie müssen registriert sein, um Links zu sehen.

sowohl OScam v11211-1 als auch PCSC-Lite v1.8.15-1 installiert. Habe oscam dann entsprechend konfiguriert und die easymouse 2 mit Karte angesteckt. In oscam wurden sofort die entitelment angezeigt. Weiter konnte ich bisher noch nicht testen.

##### edit #####
so habe jetzt beide mäuse dran, die eine läuft mit einer v14 und die andere mit einer hd+
muss jetzt nur noch checken ob die daten mitgeloggt werden.... aber nicht mehr heute

 

[sectorchan]

AW: Synology USB Easymouse - Ich verzweifel

Ich glaube das ist bei dir einfacher weil deine 713 ein intel chip hat und kein ARM oä

 

[Erdapfel]

AW: Synology USB Easymouse - Ich verzweifel

Hallo Brainstorm,

habe nach langem hin und her es auf meiner DS 212 zum laufen gebracht.
Nun hab ich mir eine DS716+ zugelegt - jetzt fängt der Spass wieder an :-(
Hast du wirklich nur die beiden Pakete von Nimloth installiert?
Was muss ich dann noch bei Oscam einstellen?

###EDIT###
so war a bissal zu schnell - es funktioniert alles

Zu Info für andere bei denen es nicht klappt:
Habe die beiden folgenden Paketquellen im Paketzentrum angegeben:

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Dann den USB_Serial Treiber installiert (nur der FTDI - Treiber wird benötigt)
dann OSCAM installiert.

Wenn man so wie ich, eine easymouse hat, dann muss man im Webif von OSCAM einen neuen Reader mit dem Protokoll Mouse anlegen.
Bei Device sollte /dev/ttyUSB0 funktionieren.


Bei Problemen kann man das Script auf der 1.Seite des Threads mal laufen lassen (einfach den Code kopieren und in einer Telnetsession einfügen). Dann sollte irgendwo eine Zeile vorkommen die so aussieht:
Bus 003 Device 002: ID 0403:6001 Reader gefunden == A9047U2A

 

[brainstorm1]

AW: Synology USB Easymouse - Ich verzweifel

Hallo Erdapfel,
ich habe deine Anfrage erst jetzt gesehen, aber Du hast es ja auch so hinbekommen...Top!
Bei mir ist es allerdings noch etwas anders als bei Dir weil meine Syno das ältere Model ist und ich noch die DS 5.2 Firmware draufhabe. Solange die DS 6.0 nicht aus dem Beta Status raus ist werde ich auch vorerst nicht umstellen dafür ist mir das noch zu unsicher...

 

[Erdapfel]

AW: Synology USB Easymouse - Ich verzweifel

@Brainstorm1: Ja du hast schon recht mit der Beta - aber die 716 läuft zur Zeit noch parallel zur alten DS. Wenn die Final da ist, steig ich komplett um.

Noch was wichtiges wenn vielleicht jemand über diesen Thred stolpert:

Ich hatte immer Probleme mit kurzen Aussetztern auf dem Client - da die ECM-Zeiten zu hoch waren. Im Log vom Server hab ich dann folgende Einträge gefunden:

Spoiler

2016/03/08 12:37:19 3AB85C3D c (ecm) user ([CAID:0D98] [PID:000004] [SID:1334] [L:80]): rejected group (0 ms) (no matching reader)
2016/03/08 12:37:20 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:37:20 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (641 ms) by ORF
2016/03/08 12:37:20 3AB85C3D c (ecm) user ([CAID:0500] [PID:051900] [SID:1334] [L:11C]): rejected group (0 ms) (no matching reader)
2016/03/08 12:37:29 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (319 ms) by ORF
2016/03/08 12:37:39 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:37:49 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:37:59 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (321 ms) by ORF
2016/03/08 12:38:09 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (322 ms) by ORF
2016/03/08 12:38:31 3AB85C3D c (ecm) user ([CAID:0D98] [PID:000004] [SID:1334] [L:80]): rejected group (0 ms) (no matching reader)
2016/03/08 12:38:31 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:38:32 3AB85C3D c (ecm) user ([CAID:0500] [PID:051900] [SID:1334] [L:11C]): rejected group (0 ms) (no matching reader)
2016/03/08 12:38:32 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (641 ms) by ORF
2016/03/08 12:38:39 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (321 ms) by ORF
2016/03/08 12:38:49 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:38:59 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (321 ms) by ORF
2016/03/08 12:39:19 3AB85C3D c (ecm) user ([CAID:0D98] [PID:000004] [SID:1334] [L:80]): rejected group (0 ms) (no matching reader)
2016/03/08 12:39:20 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (320 ms) by ORF
2016/03/08 12:39:20 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (641 ms) by ORF
2016/03/08 12:39:20 3AB85C3D c (ecm) user ([CAID:0500] [PID:051900] [SID:1334] [L:11C]): rejected group (0 ms) (no matching reader)
2016/03/08 12:39:29 3AB85C3D c (ecm) user ([CAID:0D95] [PID:000004] [SID:1334] [L:B8]): found (322 ms) by ORF

Es wurden also Anfragen vom Client gestellt, für die es keine Karte gibt.
Abhilfe hat das Erstellen der oscam.dvbapi mit folgendem Inhalt gebracht:

Spoiler

P: 0D05::132F # ORF1 HD
P: 0D05::1330 # ORF2 HD
P: 0D05::32C9 # ORF1
P: 0D05::32CA # ORF2
P: 0D05::32CB # ORF2 Wien
P: 0D05::32CC # ORF2 NiederÖsterreich
P: 0D05::32CD # ORF2 Burgenland
P: 0D05::32CE # ORF2 OberÖsterreich
P: 0D05::32CF # ORF2 Salzburg
P: 0D05::32D0 # ORF2 Tirol
P: 0D05::32D1 # ORF2 Vorarlberg
P: 0D05::32D2 # ORF2 Steiermark
P: 0D05::32D3 # ORF2 Kärnten
P: 0D05::32D4 # ATV+
P: 0D05::3332 # Austria 9 TV
P: 0D05::332D # ORF III
P: 0D05::33A5 # ORF Sport+
P: 0D05::33A7 # ATV2
P: 0D05::33AC # ATV HD
P: 0D05::4E27 # Puls 4 Austria
I: 0648 
I: 0650
I: 09C4
I: 098C
I: 0500
I: 0D98

Damit werden die betroffenen CHID's erst garnicht an den Server geschickt. (steht in den letzten 6 Zeilen)
Die Codes müssen natürlich den eigenen Bedürfnissen angepasst werden!
Statt der letzten 6 Zeilen müsste auch I:0 funktioneren - damit wird alles geblockt was nicht explizit angeführt ist.
Die Datei kann übrigens bequem über das WEBIF (im Client!!) eingegeben gerden.

Ich hoffe das das hilft jemandem weiter.

Das ganze dürfte aber auch (eleganter) über den Eintrag "Services" am Server funktionieren (ich lass es jetzt aber mal so)

LG

 

[4gx35]

AW: Synology USB Easymouse - Ich verzweifel

oscam.services beim reader verwenden ist ganz einfach:
die orf services (oder andere) per webif unter files-other file kopieren und nach restart per oscam webif beim reader anhaken

 

[sectorchan]

AW: Synology USB Easymouse - Ich verzweifel

Hi Erdapfel,

Wie hast du oscam auf deiner 212 zum laufen gebracht? Hast du noch die Binarys?
Die 212 sollte auch einen armv5 haben wie meine 213

UIch habe im netz eine crosscompiler anleitung gefunden, aber diese ist nicht auf meine DS zugeschnitten und da ich kein Linux guru bin scheitere ich an banalen sachen.