Raspbery Pi oder Beaglebone Black?

joerg_999 · 13. November 2013

AW: Raspbery Pi oder Beaglebone Black?

tweety7472 schrieb:
Hat jemand nen Pi dann könnte Man mit dmesg schauen welcher USB Treiber verwendet wird beim Bone läuft ja musb vielleicht funktioniert es ja mit den ältern USB-Hub Treibern müsste man mal schauen ob im Pi auch der musb läuft oder ein anderer dann könnte man versuchen einen angepassten Kernel zu kompilieren

Hier die gewünschte Ausgabe beim Raspi (habe hier 5 Smargos über aktiven Hub dran):

Du musst angemeldet sein, um Bilder zu sehen.

tweety7472 · 15. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hab ich mir fast gedacht im läuft ein broadcom Controller das gibt's die Endpoint Beschränkung offensichtlich nicht ,

@ Jörg
Zur Quadmouse kann ich vermuten das der verbaute Controller in der Quadmouse die Endpoinds regelt und von Bone so als nur Ein Gerät erkannt wird das die Endpoint Info direkt von Controller der Quadmouse bezieht somit ist die Limitierung des Inventra hdrc controlles nicht greift also müsste man heraus finden welcher Chip in der Quadmouse für die Steuerung der Leser zuständig ist und herausfinden ob es einen Hub gibt der denselben Chip verbaut hat, alles andere wird wahrscheinlich nicht funktionieren da es ja eine hardwarebeschränkung des Bone ist.

Daher vermute ich das mit Easymouse uns Smargo und wie sie alle heißen leider nur 3 Geräte funktionieren werden

Musb Treiber im Kernel ausgecheckt und Standart USB Treiber funktioniert auch nicht, da wird kein USB Hub mehr erkannt.

Einzige Möglichkeit wäre sich im Beagleboard Rat zu holen um mehr als 4 USB Geräte zum laufen zu bringen

joerg_999 · 15. November 2013

AW: Raspbery Pi oder Beaglebone Black?

@tweety
Das wäre noch ne Idee, kann mir ja kaum vorstellen dass die nur 3 Geräte ansprechen können (wollen) sowohl auch nur ein USB Port verbaut ist und nicht wie beim Raspi 2.
Eine Möglichkeit wäre noch mehrere Quadmäuse über Hub zu probieren. (die Frage ist ob man das vernünftig adressieren kann weil kein udef greift.

Ich bin auch noch gespannt, wie das beim Cubieboard2 ist, habe eins vor 2 Wochen bestellt in China.

tweety7472 · 15. November 2013

AW: Raspbery Pi oder Beaglebone Black?

@jörg

Mehrere Quadmäuse am Hub sollten theoretisch gehen da die Addresierung durch den quadmouse Chip vorgenommen wird und die Quadmäuse am Hub einzeln adressiert werden z.B. USB 1-1, 1-2, 1-3 dadurch sollte die Adresierung fehlerfrei laufen , der Knackpunkt ist ja die endpoint Verwaltung die meiner Meinung nach bei der Quadmouse durch den intern verbauten Controller Geregelt wird bei den einfachen Reader durch den USB Hub und der im Bone verbaute siehe Zitat Seite 12 lässt nur 4 Endpoints zu da vermute ich Mittelwelle das Problem

Beim cubieboard 2 wird die Quadmouse auch funktionieren,
Ob Einzel Reader gehen kommt auf den Hub an
Ich vermute mal wird problemloser laufen mit normalem Kernel da Multiprozessor

Karolek würd ich der Einfachheit halber empfehlen Easymouse und oder Smargo verkaufen Quadmouse anschaffen Ober Bone verkaufen und Pi zulegen

joerg_999 · 15. November 2013

AW: Raspbery Pi oder Beaglebone Black?

tweety7472 schrieb:
Karolek würd ich der Einfachheit halber empfehlen Easymouse und oder Smargo verkaufen Quadmouse anschaffen Ober Bone verkaufen und Pi zulegen

kann ich dir nur zustimmen beide Varianten also Raspi mit jeder Art von Reader als auch Bone mit Quadmaus laufen sehr stabil.

karolek2 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hallo!

Eigentlich Schade,finde das Teil nicht schlecht.
Mit 3 Reader leuft auch stabil.
Wo kann mann ewentuell noch Hilfe finden?
Sollen Sie in der Beschreibung eingeben"nur max 3 USB Geräte möglich".

Gruss

joerg_999 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Du hast recht ist eigentlich schade, die machen eigentlich ein tolles Board und so eine miese USB Anbindung.
Ich glaube es bleibt dir nur es entweder mit 3 USBMäusen oder wenn du mehr brauchst mit Quadmaus-USB (4 Reader) zu betreiben.

Grüsse joerg_999

tweety7472 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hallo,

da smit den 3 geräten ist nur ein Vermutung von mir ich weiß nicht ob das wirklich so ist, hast du denn mal 4 andere Geräte am hub getestet mal so in etwa testen und sagen was passiert

1x Easymouse
1x Tastatur
1x Maus
1x Festplatte oder Usbstick

und mal schauen ob er da auch aufgibt hab z.Z. keinen Hub da sonst würd ich selber machen

oder versuch mal die 4 easy mäuse dranzuhängen und oscam nicht laufen zu lassen ob er da auch abstürzt

joerg_999 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

@ tweety
Gehe deiner Vermutung mal auf den Grund und
werde testen, muss noch anderes Projekt fertig machen dann habe ich die Dinge beisammen und gebe dir Bescheid (kann dann auch verschiedene USB Hubs testen)

Grüße joerg_999

PS: Ich hoffe du stirbst mir nicht auch noch weg, ich glaube karolek hat aufgegeben und tauscht in um gegen Raspi...., sonst kämpfe ich wieder alleine ;-)

karolek2 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hallo!

Habe noch nicht getestet,mache ich am Montag.
Aber was soll da noch sonst werden,warum gerade beim 4 Reader?
Mit dem Umtuschen,mal sehen ob jemand da sich findet..

Gruss

tweety7472 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

aufgeben ist nicht hab ja 2 bones hier einer ist für mich mit Quadmouse einer für nen Kumpel der auch nur 4 Easymäuse hat ich muss das also irgendwie zum laufen bringen
hab mich grad auf beagleboard.org umgeschaut aber also englisch und dat ist nicht so berauschend bei mir suche also definitiv weiter

@karolek hast du irgendwelche Logs machen können bei den Abstürzen
da im Beagleboard im zusammenhang mit dem USB immer wieder von
"Babble Interrupt" gesprochen wird andere vermuten auch eine Spannungsunterversorgung wenn die CPU-Last sich verringert wird automatisch
die spannung auf usb hub gesenkt könnte sein das das dann für den 4 Raeder nicht mehr reicht

Ich versuche nächste Woche mir 4 Easymäuse auszuleihen um genauer testen zu können

karolek2 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hallo!

Habe auch an Netzteil gedacht da mal 2 Stunden gelaufen war
mal wieder nach 15 Min,mal gleich nach Neustart aus war.
Montag mache ich Tests mit anderen Geräten.
Werde ich auch tmp2ram ausmachen damit logs bleiben.
Habe so ein Log gefunden

Gruss

:01 UTC (946684801)
Oct 25 18:03:00 arm kernel: [ 3.075461] ALSA device list:Oct 25 18:03:00 arm kernel: imklog 5.8.11, log source = /proc/kmsg started.
Oct 25 18:03:00 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1749" x-info="http://www.rsyslog.com"] start
Oct 25 18:03:00 arm kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Oct 25 18:03:00 arm kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 25 18:03:00 arm kernel: [ 0.000000] Linux version 3.8.13-bone28 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Thu Sep 12 23:22:35 UTC 2013
Oct 25 18:03:00 arm kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Oct 25 18:03:00 arm kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 25 18:03:00 arm kernel: [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Oct 25 18:03:00 arm kernel: [ 0.000000] On node 0 totalpages: 130816
Oct 25 18:03:00 arm kernel: [ 0.000000] free_area_init_node: node 0, pgdat c09d2540, node_mem_map c0a4d000
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 0 pages reserved
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
Oct 25 18:03:00 arm kernel: [ 0.000000] AM335X ES1.0 (neon )
Oct 25 18:03:00 arm kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e5d000 s14080 r8192 d14592 u36864
Oct 25 18:03:00 arm kernel: [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
Oct 25 18:03:00 arm kernel: [ 0.000000] pcpu-alloc: [0] 0
Oct 25 18:03:00 arm kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
Oct 25 18:03:00 arm kernel: [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc ip=
Oct 25 18:03:00 arm kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] __ex_table already sorted, skipping sort
Oct 25 18:03:00 arm kernel: [ 0.000000] allocated 1048576 bytes of page_cgroup
Oct 25 18:03:00 arm kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory: 511MB = 511MB total
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory: 504540k/504540k available, 19748k reserved, 0K highmem
Oct 25 18:03:00 arm kernel: [ 0.000000] Virtual kernel memory layout:
Oct 25 18:03:00 arm kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .text : 0xc0008000 - 0xc0907ad0 (9215 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .init : 0xc0908000 - 0xc0951700 ( 294 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .data : 0xc0952000 - 0xc09d5500 ( 526 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .bss : 0xc09d5500 - 0xc0a4c900 ( 477 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 25 18:03:00 arm kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Oct 25 18:03:00 arm kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Oct 25 18:03:00 arm kernel: [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Oct 25 18:03:00 arm kernel: [ 0.000000] Total of 128 interrupts on 1 active controller
Oct 25 18:03:00 arm kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
Oct 25 18:03:00 arm kernel: [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Oct 25 18:03:00 arm kernel: [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
Oct 25 18:03:00 arm kernel: [ 0.000000] Console: colour dummy device 80x30
Oct 25 18:03:00 arm kernel: [ 0.000381] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
Oct 25 18:03:00 arm kernel: [ 0.017394] pid_max: default: 32768 minimum: 301
Oct 25 18:03:00 arm kernel: [ 0.017643] Security Framework initialized
Oct 25 18:03:00 arm kernel: [ 0.017744] Mount-cache hash table entries: 512
Oct 25 18:03:00 arm kernel: [ 0.027843] Initializing cgroup subsys cpuacct
Oct 25 18:03:00 arm kernel: [ 0.027880] Initializing cgroup subsys memory
Oct 25 18:03:00 arm kernel: [ 0.027947] Initializing cgroup subsys blkio
Oct 25 18:03:00 arm kernel: [ 0.028093] CPU: Testing write buffer coherency: ok
Oct 25 18:03:00 arm kernel: [ 0.028685] CPU0: thread -1, cpu 0, socket -1, mpidr 0
Oct 25 18:03:00 arm kernel: [ 0.028765] Setting up static identity map for 0x80634640 - 0x80634698
Oct 25 18:03:00 arm kernel: [ 0.030433] Brought up 1 CPUs
Oct 25 18:03:00 arm kernel: [ 0.030459] SMP: Total of 1 processors activated (363.67 BogoMIPS).
Oct 25 18:03:00 arm kernel: [ 0.031817] devtmpfs: initialized
Oct 25 18:03:00 arm kernel: [ 0.096219] pinctrl core: initialized pinctrl subsystem
Oct 25 18:03:00 arm kernel: [ 0.096461] rstctl core: initialized rstctl subsystem
Oct 25 18:03:00 arm kernel: [ 0.096962] regulator-dummy: no parameters
Oct 25 18:03:00 arm kernel: [ 0.097602] NET: Registered protocol family 16
Oct 25 18:03:00 arm kernel: [ 0.098499] DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 25 18:03:00 arm kernel: [ 0.108651] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
Oct 25 18:03:00 arm kernel: [ 0.109483] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.109514] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.109539] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.110693] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.110867] OMAP GPIO hardware version 0.1
Oct 25 18:03:00 arm kernel: [ 0.112386] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.113733] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.115240] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.115767] of_get_named_gpio_flags exited with status 52
Oct 25 18:03:00 arm kernel: [ 0.115799] gpio-rctrl rstctl.4: loaded OK
Oct 25 18:03:00 arm kernel: [ 0.121171] hw-breakpoint: debug architecture 0x4 unsupported.
Oct 25 18:03:00 arm kernel: [ 0.123339] cpsw.0: No hwaddr in dt. Using 90:59:af:55:5c:07 from efuse
Oct 25 18:03:00 arm kernel: [ 0.123372] cpsw.1: No hwaddr in dt. Using 90:59:af:55:5c:09 from efuse
Oct 25 18:03:00 arm kernel: [ 0.137445] bio: create slab <bio-0> at 0
Oct 25 18:03:00 arm kernel: [ 0.149082] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
Oct 25 18:03:00 arm kernel: [ 0.149319] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 0.149547] vmmcsd_fixed: 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.152411] SCSI subsystem initialized
Oct 25 18:03:00 arm kernel: [ 0.152826] usbcore: registered new interface driver usbfs
Oct 25 18:03:00 arm kernel: [ 0.152934] usbcore: registered new interface driver hub
Oct 25 18:03:00 arm kernel: [ 0.153270] usbcore: registered new device driver usb
Oct 25 18:03:00 arm kernel: [ 0.155412] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Oct 25 18:03:00 arm kernel: [ 0.157055] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
Oct 25 18:03:00 arm kernel: [ 0.159405] DCDC1: at 1500 mV
Oct 25 18:03:00 arm kernel: [ 0.160620] vdd_mpu: 925 <--> 1325 mV at 1100 mV
Oct 25 18:03:00 arm kernel: [ 0.161742] vdd_core: 925 <--> 1150 mV at 1100 mV
Oct 25 18:03:00 arm kernel: [ 0.162908] LDO1: at 1800 mV
Oct 25 18:03:00 arm kernel: [ 0.164034] LDO2: at 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.166015] LDO3: 1800 mV
Oct 25 18:03:00 arm kernel: [ 0.167132] LDO4: at 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.168146] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Oct 25 18:03:00 arm kernel: [ 0.168944] omap_i2c 44e0b000.i2c: unable to select pin group
Oct 25 18:03:00 arm kernel: [ 0.169829] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
Oct 25 18:03:00 arm kernel: [ 0.172362] omap_i2c 4819c000.i2c: unable to select pin group
Oct 25 18:03:00 arm kernel: [ 0.172593] media: Linux media interface: v0.10
Oct 25 18:03:00 arm kernel: [ 0.172696] Linux video capture interface: v2.00
Oct 25 18:03:00 arm kernel: [ 0.172842] pps_core: LinuxPPS API ver. 1 registered
Oct 25 18:03:00 arm kernel: [ 0.172859] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 25 18:03:00 arm kernel: [ 0.173540] Advanced Linux Sound Architecture Driver Initialized.
Oct 25 18:03:00 arm kernel: [ 0.174724] NetLabel: Initializing
Oct 25 18:03:00 arm kernel: [ 0.174745] NetLabel: domain hash size = 128
Oct 25 18:03:00 arm kernel: [ 0.174757] NetLabel: protocols = UNLABELED CIPSOv4
Oct 25 18:03:00 arm kernel: [ 0.174884] NetLabel: unlabeled traffic allowed by default
Oct 25 18:03:00 arm kernel: [ 0.175230] Switching to clocksource gp_timer
Oct 25 18:03:00 arm kernel: [ 0.231142] NET: Registered protocol family 2
Oct 25 18:03:00 arm kernel: [ 0.232326] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232471] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232618] TCP: Hash tables configured (established 4096 bind 4096)
Oct 25 18:03:00 arm kernel: [ 0.232717] TCP: reno registered
Oct 25 18:03:00 arm kernel: [ 0.232744] UDP hash table entries: 256 (order: 1, 12288 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232785] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
Oct 25 18:03:00 arm kernel: [ 0.233209] NET: Registered protocol family 1
Oct 25 18:03:00 arm kernel: [ 0.233837] RPC: Registered named UNIX socket transport module.
Oct 25 18:03:00 arm kernel: [ 0.233860] RPC: Registered udp transport module.
Oct 25 18:03:00 arm kernel: [ 0.233873] RPC: Registered tcp transport module.
Oct 25 18:03:00 arm kernel: [ 0.233886] RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 25 18:03:00 arm kernel: [ 0.234350] Trying to unpack rootfs image as initramfs...
Oct 25 18:03:00 arm kernel: [ 0.543681] Freeing initrd memory: 2520K
Oct 25 18:03:00 arm kernel: [ 0.544221] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Oct 25 18:03:00 arm kernel: [ 0.544735] CPU PMU: attempt to register multiple PMU devices!
Oct 25 18:03:00 arm kernel: [ 0.544781] arm-pmu: probe of arm-pmu failed with error -28
Oct 25 18:03:00 arm kernel: [ 0.545300] omap2_mbox_probe: platform not supported
Oct 25 18:03:00 arm kernel: [ 0.811777] VFS: Disk quotas dquot_6.5.2
Oct 25 18:03:00 arm kernel: [ 0.812146] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 25 18:03:00 arm kernel: [ 0.813438] NFS: Registering the id_resolver key type
Oct 25 18:03:00 arm kernel: [ 0.813574] Key type id_resolver registered
Oct 25 18:03:00 arm kernel: [ 0.813592] Key type id_legacy registered
Oct 25 18:03:00 arm kernel: [ 0.813659] fuse init (API version 7.20)
Oct 25 18:03:00 arm kernel: [ 0.814642] Btrfs loaded
Oct 25 18:03:00 arm kernel: [ 0.814821] msgmni has been set to 990
Oct 25 18:03:00 arm kernel: [ 0.817965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Oct 25 18:03:00 arm kernel: [ 0.817995] io scheduler noop registered
Oct 25 18:03:00 arm kernel: [ 0.818010] io scheduler deadline registered
Oct 25 18:03:00 arm kernel: [ 0.818054] io scheduler cfq registered (default)
Oct 25 18:03:00 arm kernel: [ 0.820143] tps65217-bl tps65217-bl: no platform data provided
Oct 25 18:03:00 arm kernel: [ 0.820187] tps65217-bl: probe of tps65217-bl failed with error -22
Oct 25 18:03:00 arm kernel: [ 0.821182] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 25 18:03:00 arm kernel: [ 0.823679] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
Oct 25 18:03:00 arm kernel: [ 0.824165] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
Oct 25 18:03:00 arm kernel: [ 1.566940] console [ttyO0] enabled
Oct 25 18:03:00 arm kernel: [ 1.571900] [drm] Initialized drm 1.1.0 20060810
Oct 25 18:03:00 arm kernel: [ 1.590299] brd: module loaded
Oct 25 18:03:00 arm kernel: [ 1.600436] loop: module loaded
Oct 25 18:03:00 arm kernel: [ 1.603913] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.611215] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.618501] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.625783] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.633064] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.647386] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2613BBBK6613'
Oct 25 18:03:00 arm kernel: [ 1.655187] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
Oct 25 18:03:00 arm kernel: [ 1.692939] bone-capemgr bone_capemgr.9: slot #0: No cape found
Oct 25 18:03:00 arm kernel: [ 1.730044] bone-capemgr bone_capemgr.9: slot #1: No cape found
Oct 25 18:03:00 arm kernel: [ 1.767152] bone-capemgr bone_capemgr.9: slot #2: No cape found
Oct 25 18:03:00 arm kernel: [ 1.804263] bone-capemgr bone_capemgr.9: slot #3: No cape found
Oct 25 18:03:00 arm kernel: [ 1.810525] bone-capemgr bone_capemgr.9: slot #4: specific override
Oct 25 18:03:00 arm kernel: [ 1.817133] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
Oct 25 18:03:00 arm kernel: [ 1.825176] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
Oct 25 18:03:00 arm kernel: [ 1.835327] bone-capemgr bone_capemgr.9: slot #5: specific override
Oct 25 18:03:00 arm kernel: [ 1.841931] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
Oct 25 18:03:00 arm kernel: [ 1.849973] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
Oct 25 18:03:00 arm kernel: [ 1.860022] bone-capemgr bone_capemgr.9: slot #6: specific override
Oct 25 18:03:00 arm kernel: [ 1.866624] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
Oct 25 18:03:00 arm kernel: [ 1.874669] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
Oct 25 18:03:00 arm kernel: [ 1.885316] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.894202] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.903095] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.911872] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.920588] bone-capemgr bone_capemgr.9: initialized OK.
Oct 25 18:03:00 arm kernel: [ 1.926199] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.935057] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.945853] OneNAND driver initializing
Oct 25 18:03:00 arm kernel: [ 1.951451] usbcore: registered new interface driver cdc_ether
Oct 25 18:03:00 arm kernel: [ 1.957639] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.966425] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.975186] usbcore: registered new interface driver rndis_host
Oct 25 18:03:00 arm kernel: [ 1.981493] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.990383] usbcore: registered new interface driver cdc_ncm
Oct 25 18:03:00 arm kernel: [ 1.996373] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.011158] usbcore: registered new interface driver cdc_acm
Oct 25 18:03:00 arm kernel: [ 2.017164] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Oct 25 18:03:00 arm kernel: [ 2.025562] Initializing USB Mass Storage driver...
Oct 25 18:03:00 arm kernel: [ 2.030724] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.041464] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.055873] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
Oct 25 18:03:00 arm kernel: [ 2.062108] usbcore: registered new interface driver usb-storage
Oct 25 18:03:00 arm kernel: [ 2.068420] USB Mass Storage support registered.
Oct 25 18:03:00 arm kernel: [ 2.074259] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
Oct 25 18:03:00 arm kernel: [ 2.081163] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 2.089891] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.098693] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.110148] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
Oct 25 18:03:00 arm kernel: [ 2.116960] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
Oct 25 18:03:00 arm kernel: [ 2.122208] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Oct 25 18:03:00 arm kernel: [ 2.131952] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
Oct 25 18:03:00 arm kernel: [ 2.140544] platform 4830e000.fb: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 2.146434] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Oct 25 18:03:00 arm kernel: [ 2.146457] musb-hdrc: MHDRC RTL version 2.0
Oct 25 18:03:00 arm kernel: [ 2.146471] musb-hdrc: setup fifo_mode 4
Oct 25 18:03:00 arm kernel: [ 2.146498] musb-hdrc: 28/31 max ep, 16384/16384 memory
Oct 25 18:03:00 arm kernel: [ 2.146661] musb-hdrc musb-hdrc.0.auto: *** mode=3
Oct 25 18:03:00 arm kernel: [ 2.151751] musb-hdrc musb-hdrc.0.auto: *** power=250
Oct 25 18:03:00 arm kernel: [ 2.158818] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
Oct 25 18:03:00 arm kernel: [ 2.165731] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 2.174359] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.183922] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
Oct 25 18:03:00 arm kernel: [ 2.189197] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Oct 25 18:03:00 arm kernel: [ 2.198008] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.206820] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.221153] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Oct 25 18:03:00 arm kernel: [ 2.221172] musb-hdrc: MHDRC RTL version 2.0
Oct 25 18:03:00 arm kernel: [ 2.221186] musb-hdrc: setup fifo_mode 4
Oct 25 18:03:00 arm kernel: [ 2.221208] musb-hdrc: 28/31 max ep, 16384/16384 memory
Oct 25 18:03:00 arm kernel: [ 2.221351] musb-hdrc musb-hdrc.1.auto: *** mode=1
Oct 25 18:03:00 arm kernel: [ 2.226409] musb-hdrc musb-hdrc.1.auto: *** power=250
Oct 25 18:03:00 arm kernel: [ 2.231727] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 2.237947] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.249862] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
Oct 25 18:03:00 arm kernel: [ 2.258162] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
Oct 25 18:03:00 arm kernel: [ 2.258280] usb usb1: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 2.258339] usb usb1: udev 1, busnum 1, minor = 0
Oct 25 18:03:00 arm kernel: [ 2.258361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 18:03:00 arm kernel: [ 2.265530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 18:03:00 arm kernel: [ 2.273119] usb usb1: Product: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 2.278346] usb usb1: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Oct 25 18:03:00 arm kernel: [ 2.284658] usb usb1: SerialNumber: musb-hdrc.1.auto
Oct 25 18:03:00 arm kernel: [ 2.290245] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
Oct 25 18:03:00 arm kernel: [ 2.299868] bone-capemgr bone_capemgr.9: slot #6: Failed verification
Oct 25 18:03:00 arm kernel: [ 2.306648] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.317160] usb usb1: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 2.317189] usb usb1: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 2.317265] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 2.317450] hub 1-0:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 2.317471] hub 1-0:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 2.317503] hub 1-0:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 2.321582] hub 1-0:1.0: 1 port detected
Oct 25 18:03:00 arm kernel: [ 2.325763] hub 1-0:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 2.325782] hub 1-0:1.0: individual port power switching
Oct 25 18:03:00 arm kernel: [ 2.325798] hub 1-0:1.0: no over-current protection
Oct 25 18:03:00 arm kernel: [ 2.325814] hub 1-0:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 2.325833] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
Oct 25 18:03:00 arm kernel: [ 2.325851] hub 1-0:1.0: power on to power good time: 10ms
Oct 25 18:03:00 arm kernel: [ 2.325895] hub 1-0:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 2.325998] hub 1-0:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 2.327147] mousedev: PS/2 mouse device common for all mice
Oct 25 18:03:00 arm kernel: [ 2.335781] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
Oct 25 18:03:00 arm kernel: [ 2.343637] i2c /dev entries driver
Oct 25 18:03:00 arm kernel: [ 2.348987] pps_ldisc: PPS line discipline registered
Oct 25 18:03:00 arm kernel: [ 2.354497] Driver for 1-wire Dallas network protocol.
Oct 25 18:03:00 arm kernel: [ 2.361833] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Oct 25 18:03:00 arm kernel: [ 2.369854] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
Oct 25 18:03:00 arm kernel: [ 2.378847] cpuidle: using governor ladder
Oct 25 18:03:00 arm kernel: [ 2.383209] cpuidle: using governor menu
Oct 25 18:03:00 arm kernel: [ 2.387783] of_get_named_gpio_flags exited with status 6
Oct 25 18:03:00 arm kernel: [ 2.387804] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.387818] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.387855] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
Oct 25 18:03:00 arm kernel: [ 2.395104] omap_hsmmc mmc.5: Failed to get rstctl; not using any
Oct 25 18:03:00 arm kernel: [ 2.402018] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
Oct 25 18:03:00 arm kernel: [ 2.409230] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
Oct 25 18:03:00 arm kernel: [ 2.416592] mmc.5 supply vmmc_aux not found, using dummy regulator
Oct 25 18:03:00 arm kernel: [ 2.423651] omap_hsmmc mmc.5: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.430590] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
Oct 25 18:03:00 arm kernel: [ 2.430673] hub 1-0:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 2.430718] usb usb1: bus auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 2.458834] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.458859] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.458874] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.458927] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.465169] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.473177] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.479668] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
Oct 25 18:03:00 arm kernel: [ 2.486836] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
Oct 25 18:03:00 arm kernel: [ 2.494422] mmc.11 supply vmmc_aux not found, using dummy regulator
Oct 25 18:03:00 arm kernel: [ 2.501215] omap_hsmmc mmc.11: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.535274] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
Oct 25 18:03:00 arm kernel: [ 2.546999] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
Oct 25 18:03:00 arm kernel: [ 2.554313] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Oct 25 18:03:00 arm kernel: [ 2.563340] usb usb1: usb wakeup-resume
Oct 25 18:03:00 arm kernel: [ 2.563390] usb usb1: usb auto-resume
Oct 25 18:03:00 arm kernel: [ 2.563419] hub 1-0:1.0: hub_resume
Oct 25 18:03:00 arm kernel: [ 2.563473] hub 1-0:1.0: port 1: status 0101 change 0001
Oct 25 18:03:00 arm kernel: [ 2.563726] leds-gpio gpio-leds.8: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.571026] of_get_named_gpio_flags exited with status 53
Oct 25 18:03:00 arm kernel: [ 2.571050] of_get_named_gpio_flags exited with status 54
Oct 25 18:03:00 arm kernel: [ 2.571070] of_get_named_gpio_flags exited with status 55
Oct 25 18:03:00 arm kernel: [ 2.571089] of_get_named_gpio_flags exited with status 56
Oct 25 18:03:00 arm kernel: [ 2.571207] of_get_named_gpio_flags exited with status 53
Oct 25 18:03:00 arm kernel: [ 2.571457] of_get_named_gpio_flags exited with status 54
Oct 25 18:03:00 arm kernel: [ 2.571661] of_get_named_gpio_flags exited with status 55
Oct 25 18:03:00 arm kernel: [ 2.571925] of_get_named_gpio_flags exited with status 56
Oct 25 18:03:00 arm kernel: [ 2.572522] ledtrig-cpu: registered to indicate activity on CPUs
Oct 25 18:03:00 arm kernel: [ 2.579431] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
Oct 25 18:03:00 arm kernel: [ 2.586724] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Oct 25 18:03:00 arm kernel: [ 2.595402] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Oct 25 18:03:00 arm kernel: [ 2.601810] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
Oct 25 18:03:00 arm kernel: [ 2.609005] mmc0: host does not support reading read-only switch. assuming write-enable.
Oct 25 18:03:00 arm kernel: [ 2.617672] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
Oct 25 18:03:00 arm kernel: [ 2.625870] usbcore: registered new interface driver usbhid
Oct 25 18:03:00 arm kernel: [ 2.631829] usbhid: USB HID core driver
Oct 25 18:03:00 arm kernel: [ 2.636094] mmc0: new high speed SDHC card at address 0007
Oct 25 18:03:00 arm kernel: [ 2.644001] ashmem: initialized
Oct 25 18:03:00 arm kernel: [ 2.647510] mmcblk0: mmc0:0007 SD4GB 3.69 GiB
Oct 25 18:03:00 arm kernel: [ 2.652661] logger: created 256K log 'log_main'
Oct 25 18:03:00 arm kernel: [ 2.658947] logger: created 256K log 'log_events'
Oct 25 18:03:00 arm kernel: [ 2.664170] mmcblk0: p1 p2
Oct 25 18:03:00 arm kernel: [ 2.667303] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Oct 25 18:03:00 arm kernel: [ 2.667376] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Oct 25 18:03:00 arm kernel: [ 2.668365] logger: created 256K log 'log_radio'
Oct 25 18:03:00 arm kernel: [ 2.674604] logger: created 256K log 'log_system'
Oct 25 18:03:00 arm kernel: [ 2.682798] of_get_named_gpio_flags exited with status 59
Oct 25 18:03:00 arm kernel: [ 2.684380] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
Oct 25 18:03:00 arm kernel: [ 2.696222] TCP: cubic registered
Oct 25 18:03:00 arm kernel: [ 2.699935] NET: Registered protocol family 10
Oct 25 18:03:00 arm kernel: [ 2.706470] NET: Registered protocol family 17
Oct 25 18:03:00 arm kernel: [ 2.711649] Key type dns_resolver registered
Oct 25 18:03:00 arm kernel: [ 2.716533] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Oct 25 18:03:00 arm kernel: [ 2.724799] ThumbEE CPU extension supported.
Oct 25 18:03:00 arm kernel: [ 2.729355] Registering SWP/SWPB emulation handler
Oct 25 18:03:00 arm kernel: [ 2.735510] registered taskstats version 1
Oct 25 18:03:00 arm kernel: [ 2.742604] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.742640] tilcdc 4830e000.fb: No power control GPIO
Oct 25 18:03:00 arm kernel: [ 2.771120] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Oct 25 18:03:00 arm kernel: [ 2.867883] tilcdc 4830e000.fb: found TDA19988
Oct 25 18:03:00 arm kernel: [ 2.873383] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 25 18:03:00 arm kernel: [ 2.880362] [drm] No driver support for vblank timestamp query.
Oct 25 18:03:00 arm kernel: [ 2.887162] tilcdc 4830e000.fb: No connectors reported connected with modes
Oct 25 18:03:00 arm kernel: [ 2.894499] [drm] Cannot find any crtc or sizes - going 1024x768
Oct 25 18:03:00 arm kernel: [ 2.915251] Console: switching to colour frame buffer device 128x48
Oct 25 18:03:00 arm kernel: [ 2.931148] tilcdc 4830e000.fb: fb0: frame buffer device
Oct 25 18:03:00 arm kernel: [ 2.936826] tilcdc 4830e000.fb: registered panic notifier
Oct 25 18:03:00 arm kernel: [ 2.942538] usb 1-1: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 2.942628] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
Oct 25 18:03:00 arm kernel: [ 2.964633] usb 1-1: udev 2, busnum 1, minor = 1
Oct 25 18:03:00 arm kernel: [ 2.964666] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Oct 25 18:03:00 arm kernel: [ 2.971731] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 25 18:03:00 arm kernel: [ 2.979239] usb 1-1: Product: USB2.0 Hub
Oct 25 18:03:00 arm kernel: [ 2.984061] usb 1-1: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 2.984089] usb 1-1: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 2.984486] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 2.984682] hub 1-1:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 2.984705] hub 1-1:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 2.984739] hub 1-1:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 2.989037] hub 1-1:1.0: 4 ports detected
Oct 25 18:03:00 arm kernel: [ 2.993271] hub 1-1:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 2.993289] hub 1-1:1.0: ganged power switching
Oct 25 18:03:00 arm kernel: [ 2.993306] hub 1-1:1.0: global over-current protection
Oct 25 18:03:00 arm kernel: [ 2.993322] hub 1-1:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 2.993341] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Oct 25 18:03:00 arm kernel: [ 2.993357] hub 1-1:1.0: Port indicators are supported
Oct 25 18:03:00 arm kernel: [ 2.993374] hub 1-1:1.0: power on to power good time: 100ms
Oct 25 18:03:00 arm kernel: [ 2.993791] hub 1-1:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 2.993812] hub 1-1:1.0: no over-current condition exists
Oct 25 18:03:00 arm kernel: [ 2.994135] hub 1-1:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 2.995706] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Oct 25 18:03:00 arm kernel: [ 2.995759] hub 1-0:1.0: port 1 enable change, status 00000503
Oct 25 18:03:00 arm kernel: [ 2.999577] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
Oct 25 18:03:00 arm kernel: [ 3.006040] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
Oct 25 18:03:00 arm kernel: [ 3.023201] libphy: 4a101000.mdio: probed
Oct 25 18:03:00 arm kernel: [ 3.027501] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Oct 25 18:03:00 arm kernel: [ 3.037449] Detected MACID = 90:59:af:55:5c:07
Oct 25 18:03:00 arm kernel: [ 3.042209] cpsw 4a100000.ethernet: NAPI disabled
Oct 25 18:03:00 arm kernel: [ 3.049373] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
Oct 25 18:03:00 arm kernel: [ 3.065830] ALSA device list:
Oct 25 18:03:00 arm kernel: [ 3.069024] #0: TI BeagleBone Black
Oct 25 18:03:00 arm kernel: [ 3.073826] Freeing init memory: 292K
Oct 25 18:03:00 arm kernel: [ 3.096233] hub 1-1:1.0: port 3: status 0101 change 0001
Oct 25 18:03:00 arm kernel: [ 3.140125] mmc1: BKOPS_EN bit is not set
Oct 25 18:03:00 arm kernel: [ 3.149214] mmc1: new high speed MMC card at address 0001
Oct 25 18:03:00 arm kernel: [ 3.159877] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
Oct 25 18:03:00 arm kernel: [ 3.169671] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
Oct 25 18:03:00 arm kernel: [ 3.187171] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
Oct 25 18:03:00 arm kernel: [ 3.197040] hub 1-1:1.0: state 7 ports 4 chg 0008 evt 0000
Oct 25 18:03:00 arm kernel: [ 3.197357] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
Oct 25 18:03:00 arm kernel: [ 3.208814] mmcblk1: p1 p2
Oct 25 18:03:00 arm kernel: [ 3.221676] mmcblk1boot1: unknown partition table
Oct 25 18:03:00 arm kernel: [ 3.241792] mmcblk1boot0: unknown partition table
Oct 25 18:03:00 arm kernel: [ 3.263560] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc
Oct 25 18:03:00 arm kernel: [ 3.360003] usb 1-1.3: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 3.360385] usb 1-1.3: udev 3, busnum 1, minor = 2
Oct 25 18:03:00 arm kernel: [ 3.360404] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
Oct 25 18:03:00 arm kernel: [ 3.367692] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 25 18:03:00 arm kernel: [ 3.375358] usb 1-1.3: Product: USB2.0 Hub
Oct 25 18:03:00 arm kernel: [ 3.390576] usb 1-1.3: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 3.390605] usb 1-1.3: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 3.392298] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 3.392457] hub 1-1.3:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 3.392472] hub 1-1.3:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 3.392495] hub 1-1.3:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 3.407894] hub 1-1.3:1.0: 4 ports detected
Oct 25 18:03:00 arm kernel: [ 3.419640] hub 1-1.3:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 3.419665] hub 1-1.3:1.0: ganged power switching
Oct 25 18:03:00 arm kernel: [ 3.419675] hub 1-1.3:1.0: global over-current protection
Oct 25 18:03:00 arm kernel: [ 3.419685] hub 1-1.3:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 3.419698] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
Oct 25 18:03:00 arm kernel: [ 3.419707] hub 1-1.3:1.0: Port indicators are supported
Oct 25 18:03:00 arm kernel: [ 3.419717] hub 1-1.3:1.0: power on to power good time: 100ms
Oct 25 18:03:00 arm kernel: [ 3.421846] hub 1-1.3:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 3.421868] hub 1-1.3:1.0: no over-current condition exists
Oct 25 18:03:00 arm kernel: [ 3.422117] hub 1-1.3:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 3.524341] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0000
Oct 25 18:03:00 arm kernel: [ 3.525584] hub 1-1.3:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.526113] usb 1-1.3: usb auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 3.539865] hub 1-1:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.542485] usb 1-1: usb auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 3.556315] hub 1-0:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.556362] usb usb1: bus auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 5.018354] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 18:03:00 arm kernel: [ 8.833226] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Oct 25 18:03:00 arm kernel: [ 9.261899] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Oct 25 18:03:00 arm kernel: [ 14.737893] net eth0: initializing cpsw version 1.12 (0)
Oct 25 18:03:00 arm kernel: [ 14.745659] net eth0: phy found : id is : 0x7c0f1
Oct 25 18:03:00 arm kernel: [ 14.750626] libphy: PHY 4a101000.mdio:01 not found
Oct 25 18:03:00 arm kernel: [ 14.755661] net eth0: phy 4a101000.mdio:01 not found on slave 1
Oct 25 18:03:00 arm kernel: [ 14.767764] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 18:03:00 arm kernel: [ 17.822361] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Oct 25 18:03:00 arm kernel: [ 17.828387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 18:03:00 arm kernel: [ 22.431899] gadget: using random self ethernet address
Oct 25 18:03:00 arm kernel: [ 22.442474] usb0: MAC ea:97:fd:4a:f4:16
Oct 25 18:03:00 arm kernel: [ 22.446642] usb0: HOST MAC 90:59:af:55:5c:09
Oct 25 18:03:00 arm kernel: [ 22.470217] gadget: Mass Storage Function, version: 2009/09/11
Oct 25 18:03:00 arm kernel: [ 22.476551] gadget: Number of LUNs=1
Oct 25 18:03:00 arm kernel: [ 22.495820] lun0: LUN: removable file: /dev/mmcblk0p1
Oct 25 18:03:00 arm kernel: [ 22.515459] gadget: Multifunction Composite Gadget
Oct 25 18:03:00 arm kernel: [ 22.532501] gadget: g_multi ready
Oct 25 18:03:00 arm kernel: [ 22.561353] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 22.605210] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
Oct 25 18:03:00 arm kernel: [ 22.628671] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
Oct 25 18:03:00 arm kernel: [ 22.628775] usb usb2: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 22.628812] usb usb2: udev 1, busnum 2, minor = 128
Oct 25 18:03:00 arm kernel: [ 22.628826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 18:03:00 arm kernel: [ 22.636007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 18:03:00 arm kernel: [ 22.643583] usb usb2: Product: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 22.648793] usb usb2: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Oct 25 18:03:00 arm kernel: [ 22.655090] usb usb2: SerialNumber: musb-hdrc.0.auto
Oct 25 18:03:00 arm kernel: [ 22.671552] usb usb2: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 22.671580] usb usb2: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 22.671652] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 22.671849] hub 2-0:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 22.671864] hub 2-0:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 22.671886] hub 2-0:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 22.694469] hub 2-0:1.0: 1 port detected
Oct 25 18:03:00 arm kernel: [ 22.703946] hub 2-0:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 22.703972] hub 2-0:1.0: individual port power switching
Oct 25 18:03:00 arm kernel: [ 22.703983] hub 2-0:1.0: no over-current protection
Oct 25 18:03:00 arm kernel: [ 22.703993] hub 2-0:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 22.704005] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
Oct 25 18:03:00 arm kernel: [ 22.704015] hub 2-0:1.0: power on to power good time: 10ms
Oct 25 18:03:00 arm kernel: [ 22.704065] hub 2-0:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 22.704169] hub 2-0:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 22.804508] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
Oct 25 18:03:00 arm kernel: [ 22.804580] hub 2-0:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 22.804610] usb usb2: bus auto-suspend, wakeup 1
Oct 25 18:03:02 arm /usr/sbin/cron[1946]: (CRON) INFO (pidfile fd = 3)
Oct 25 18:03:02 arm /usr/sbin/cron[1950]: (CRON) STARTUP (fork ok)
Oct 25 18:03:02 arm /usr/sbin/cron[1950]: (CRON) INFO (Running @reboot jobs)
Oct 25 18:03:03 arm udhcpd[2062]: udhcpd (v1.20.2) started
Oct 25 18:03:03 arm udhcpd[2062]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Oct 25 18:03:03 arm udhcpd[2062]: is interface usb0 up and configured?: Cannot assign requested address
Oct 25 18:03:03 arm udhcpd[2065]: udhcpd (v1.20.2) started
Oct 25 18:03:03 arm udhcpd[2065]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Oct 25 18:03:03 arm udhcpd[2065]: is interface usb0 up and configured?: Cannot assign requested address
Oct 25 18:03:03 arm kernel: [ 25.254490] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Oct 25 18:03:03 arm udhcpd[2073]: udhcpd (v1.20.2) started
Oct 25 18:03:03 arm udhcpd[2073]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Nov 8 18:08:42 arm ntpdate[1588]: step time server 129.70.132.37 offset 1209934.203828 sec
Nov 8 18:08:57 arm ntpdate[3019]: adjust time server 85.195.93.214 offset -0.000259 sec
Nov 8 18:10:43 arm kernel: [ 150.998161] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 18:03:00 arm kernel: imklog 5.8.11, log source = /proc/kmsg started.
Oct 25 18:03:00 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1699" x-info="http://www.rsyslog.com"] start
Oct 25 18:03:00 arm kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Oct 25 18:03:00 arm kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 25 18:03:00 arm kernel: [ 0.000000] Linux version 3.8.13-bone28 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Thu Sep 12 23:22:35 UTC 2013
Oct 25 18:03:00 arm kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Oct 25 18:03:00 arm kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 25 18:03:00 arm kernel: [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Oct 25 18:03:00 arm kernel: [ 0.000000] On node 0 totalpages: 130816
Oct 25 18:03:00 arm kernel: [ 0.000000] free_area_init_node: node 0, pgdat c09d2540, node_mem_map c0a4d000
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 0 pages reserved
Oct 25 18:03:00 arm kernel: [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
Oct 25 18:03:00 arm kernel: [ 0.000000] AM335X ES1.0 (neon )
Oct 25 18:03:00 arm kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e5d000 s14080 r8192 d14592 u36864
Oct 25 18:03:00 arm kernel: [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
Oct 25 18:03:00 arm kernel: [ 0.000000] pcpu-alloc: [0] 0
Oct 25 18:03:00 arm kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
Oct 25 18:03:00 arm kernel: [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=c861578f-d3dd-4858-9122-978b2a769e51 ro rootfstype=ext4 rootwait fixrtc ip=
Oct 25 18:03:00 arm kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 25 18:03:00 arm kernel: [ 0.000000] __ex_table already sorted, skipping sort
Oct 25 18:03:00 arm kernel: [ 0.000000] allocated 1048576 bytes of page_cgroup
Oct 25 18:03:00 arm kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory: 511MB = 511MB total
Oct 25 18:03:00 arm kernel: [ 0.000000] Memory: 504544k/504544k available, 19744k reserved, 0K highmem
Oct 25 18:03:00 arm kernel: [ 0.000000] Virtual kernel memory layout:
Oct 25 18:03:00 arm kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .text : 0xc0008000 - 0xc0907ad0 (9215 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .init : 0xc0908000 - 0xc0951700 ( 294 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .data : 0xc0952000 - 0xc09d5500 ( 526 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] .bss : 0xc09d5500 - 0xc0a4c900 ( 477 kB)
Oct 25 18:03:00 arm kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 25 18:03:00 arm kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Oct 25 18:03:00 arm kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Oct 25 18:03:00 arm kernel: [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Oct 25 18:03:00 arm kernel: [ 0.000000] Total of 128 interrupts on 1 active controller
Oct 25 18:03:00 arm kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
Oct 25 18:03:00 arm kernel: [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Oct 25 18:03:00 arm kernel: [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
Oct 25 18:03:00 arm kernel: [ 0.000000] Console: colour dummy device 80x30
Oct 25 18:03:00 arm kernel: [ 0.000381] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
Oct 25 18:03:00 arm kernel: [ 0.017386] pid_max: default: 32768 minimum: 301
Oct 25 18:03:00 arm kernel: [ 0.017630] Security Framework initialized
Oct 25 18:03:00 arm kernel: [ 0.017728] Mount-cache hash table entries: 512
Oct 25 18:03:00 arm kernel: [ 0.027843] Initializing cgroup subsys cpuacct
Oct 25 18:03:00 arm kernel: [ 0.027882] Initializing cgroup subsys memory
Oct 25 18:03:00 arm kernel: [ 0.027950] Initializing cgroup subsys blkio
Oct 25 18:03:00 arm kernel: [ 0.028097] CPU: Testing write buffer coherency: ok
Oct 25 18:03:00 arm kernel: [ 0.028686] CPU0: thread -1, cpu 0, socket -1, mpidr 0
Oct 25 18:03:00 arm kernel: [ 0.028767] Setting up static identity map for 0x80634640 - 0x80634698
Oct 25 18:03:00 arm kernel: [ 0.030441] Brought up 1 CPUs
Oct 25 18:03:00 arm kernel: [ 0.030466] SMP: Total of 1 processors activated (363.67 BogoMIPS).
Oct 25 18:03:00 arm kernel: [ 0.031839] devtmpfs: initialized
Oct 25 18:03:00 arm kernel: [ 0.096180] pinctrl core: initialized pinctrl subsystem
Oct 25 18:03:00 arm kernel: [ 0.096422] rstctl core: initialized rstctl subsystem
Oct 25 18:03:00 arm kernel: [ 0.096916] regulator-dummy: no parameters
Oct 25 18:03:00 arm kernel: [ 0.097561] NET: Registered protocol family 16
Oct 25 18:03:00 arm kernel: [ 0.098461] DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 25 18:03:00 arm kernel: [ 0.108624] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
Oct 25 18:03:00 arm kernel: [ 0.109457] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.109489] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.109513] platform 49000000.edma: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 0.110672] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.110845] OMAP GPIO hardware version 0.1
Oct 25 18:03:00 arm kernel: [ 0.112382] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.113729] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.115231] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Oct 25 18:03:00 arm kernel: [ 0.115757] of_get_named_gpio_flags exited with status 52
Oct 25 18:03:00 arm kernel: [ 0.115789] gpio-rctrl rstctl.4: loaded OK
Oct 25 18:03:00 arm kernel: [ 0.121141] hw-breakpoint: debug architecture 0x4 unsupported.
Oct 25 18:03:00 arm kernel: [ 0.123290] cpsw.0: No hwaddr in dt. Using 90:59:af:55:5c:07 from efuse
Oct 25 18:03:00 arm kernel: [ 0.123325] cpsw.1: No hwaddr in dt. Using 90:59:af:55:5c:09 from efuse
Oct 25 18:03:00 arm kernel: [ 0.137416] bio: create slab <bio-0> at 0
Oct 25 18:03:00 arm kernel: [ 0.149046] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
Oct 25 18:03:00 arm kernel: [ 0.149283] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 0.149512] vmmcsd_fixed: 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.152385] SCSI subsystem initialized
Oct 25 18:03:00 arm kernel: [ 0.152796] usbcore: registered new interface driver usbfs
Oct 25 18:03:00 arm kernel: [ 0.152904] usbcore: registered new interface driver hub
Oct 25 18:03:00 arm kernel: [ 0.153235] usbcore: registered new device driver usb
Oct 25 18:03:00 arm kernel: [ 0.155398] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Oct 25 18:03:00 arm kernel: [ 0.157047] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
Oct 25 18:03:00 arm kernel: [ 0.159388] DCDC1: at 1500 mV
Oct 25 18:03:00 arm kernel: [ 0.160586] vdd_mpu: 925 <--> 1325 mV at 1100 mV
Oct 25 18:03:00 arm kernel: [ 0.161700] vdd_core: 925 <--> 1150 mV at 1100 mV
Oct 25 18:03:00 arm kernel: [ 0.162874] LDO1: at 1800 mV
Oct 25 18:03:00 arm kernel: [ 0.164011] LDO2: at 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.166001] LDO3: 1800 mV
Oct 25 18:03:00 arm kernel: [ 0.167117] LDO4: at 3300 mV
Oct 25 18:03:00 arm kernel: [ 0.168141] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Oct 25 18:03:00 arm kernel: [ 0.168942] omap_i2c 44e0b000.i2c: unable to select pin group
Oct 25 18:03:00 arm kernel: [ 0.169831] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
Oct 25 18:03:00 arm kernel: [ 0.172375] omap_i2c 4819c000.i2c: unable to select pin group
Oct 25 18:03:00 arm kernel: [ 0.172603] media: Linux media interface: v0.10
Oct 25 18:03:00 arm kernel: [ 0.172704] Linux video capture interface: v2.00
Oct 25 18:03:00 arm kernel: [ 0.172845] pps_core: LinuxPPS API ver. 1 registered
Oct 25 18:03:00 arm kernel: [ 0.172862] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 25 18:03:00 arm kernel: [ 0.173546] Advanced Linux Sound Architecture Driver Initialized.
Oct 25 18:03:00 arm kernel: [ 0.174744] NetLabel: Initializing
Oct 25 18:03:00 arm kernel: [ 0.174766] NetLabel: domain hash size = 128
Oct 25 18:03:00 arm kernel: [ 0.174777] NetLabel: protocols = UNLABELED CIPSOv4
Oct 25 18:03:00 arm kernel: [ 0.174904] NetLabel: unlabeled traffic allowed by default
Oct 25 18:03:00 arm kernel: [ 0.175251] Switching to clocksource gp_timer
Oct 25 18:03:00 arm kernel: [ 0.231205] NET: Registered protocol family 2
Oct 25 18:03:00 arm kernel: [ 0.232389] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232535] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232681] TCP: Hash tables configured (established 4096 bind 4096)
Oct 25 18:03:00 arm kernel: [ 0.232783] TCP: reno registered
Oct 25 18:03:00 arm kernel: [ 0.232810] UDP hash table entries: 256 (order: 1, 12288 bytes)
Oct 25 18:03:00 arm kernel: [ 0.232852] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
Oct 25 18:03:00 arm kernel: [ 0.233278] NET: Registered protocol family 1
Oct 25 18:03:00 arm kernel: [ 0.233908] RPC: Registered named UNIX socket transport module.
Oct 25 18:03:00 arm kernel: [ 0.234001] RPC: Registered udp transport module.
Oct 25 18:03:00 arm kernel: [ 0.234017] RPC: Registered tcp transport module.
Oct 25 18:03:00 arm kernel: [ 0.234030] RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 25 18:03:00 arm kernel: [ 0.234421] Trying to unpack rootfs image as initramfs...
Oct 25 18:03:00 arm kernel: [ 0.544053] Freeing initrd memory: 2516K
Oct 25 18:03:00 arm kernel: [ 0.544665] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Oct 25 18:03:00 arm kernel: [ 0.545083] CPU PMU: attempt to register multiple PMU devices!
Oct 25 18:03:00 arm kernel: [ 0.545125] arm-pmu: probe of arm-pmu failed with error -28
Oct 25 18:03:00 arm kernel: [ 0.545625] omap2_mbox_probe: platform not supported
Oct 25 18:03:00 arm kernel: [ 0.812225] VFS: Disk quotas dquot_6.5.2
Oct 25 18:03:00 arm kernel: [ 0.812486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 25 18:03:00 arm kernel: [ 0.813772] NFS: Registering the id_resolver key type
Oct 25 18:03:00 arm kernel: [ 0.813885] Key type id_resolver registered
Oct 25 18:03:00 arm kernel: [ 0.813902] Key type id_legacy registered
Oct 25 18:03:00 arm kernel: [ 0.813971] fuse init (API version 7.20)
Oct 25 18:03:00 arm kernel: [ 0.814959] Btrfs loaded
Oct 25 18:03:00 arm kernel: [ 0.815138] msgmni has been set to 990
Oct 25 18:03:00 arm kernel: [ 0.818314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Oct 25 18:03:00 arm kernel: [ 0.818344] io scheduler noop registered
Oct 25 18:03:00 arm kernel: [ 0.818358] io scheduler deadline registered
Oct 25 18:03:00 arm kernel: [ 0.818402] io scheduler cfq registered (default)
Oct 25 18:03:00 arm kernel: [ 0.820509] tps65217-bl tps65217-bl: no platform data provided
Oct 25 18:03:00 arm kernel: [ 0.820553] tps65217-bl: probe of tps65217-bl failed with error -22
Oct 25 18:03:00 arm kernel: [ 0.821437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 25 18:03:00 arm kernel: [ 0.824200] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
Oct 25 18:03:00 arm kernel: [ 0.824525] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
Oct 25 18:03:00 arm kernel: [ 1.569718] console [ttyO0] enabled
Oct 25 18:03:00 arm kernel: [ 1.574674] [drm] Initialized drm 1.1.0 20060810
Oct 25 18:03:00 arm kernel: [ 1.593058] brd: module loaded
Oct 25 18:03:00 arm kernel: [ 1.603271] loop: module loaded
Oct 25 18:03:00 arm kernel: [ 1.606726] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.614032] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.621319] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.628602] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.635884] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Oct 25 18:03:00 arm kernel: [ 1.650233] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2613BBBK6613'
Oct 25 18:03:00 arm kernel: [ 1.658033] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
Oct 25 18:03:00 arm kernel: [ 1.696868] bone-capemgr bone_capemgr.9: slot #0: No cape found
Oct 25 18:03:00 arm kernel: [ 1.733972] bone-capemgr bone_capemgr.9: slot #1: No cape found
Oct 25 18:03:00 arm kernel: [ 1.771080] bone-capemgr bone_capemgr.9: slot #2: No cape found
Oct 25 18:03:00 arm kernel: [ 1.808189] bone-capemgr bone_capemgr.9: slot #3: No cape found
Oct 25 18:03:00 arm kernel: [ 1.814452] bone-capemgr bone_capemgr.9: slot #4: specific override
Oct 25 18:03:00 arm kernel: [ 1.821061] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
Oct 25 18:03:00 arm kernel: [ 1.829105] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
Oct 25 18:03:00 arm kernel: [ 1.839258] bone-capemgr bone_capemgr.9: slot #5: specific override
Oct 25 18:03:00 arm kernel: [ 1.845863] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
Oct 25 18:03:00 arm kernel: [ 1.853904] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
Oct 25 18:03:00 arm kernel: [ 1.863952] bone-capemgr bone_capemgr.9: slot #6: specific override
Oct 25 18:03:00 arm kernel: [ 1.870554] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
Oct 25 18:03:00 arm kernel: [ 1.878597] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
Oct 25 18:03:00 arm kernel: [ 1.889238] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.898123] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.907020] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.915800] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.924513] bone-capemgr bone_capemgr.9: initialized OK.
Oct 25 18:03:00 arm kernel: [ 1.930121] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.938979] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.949770] OneNAND driver initializing
Oct 25 18:03:00 arm kernel: [ 1.955366] usbcore: registered new interface driver cdc_ether
Oct 25 18:03:00 arm kernel: [ 1.961559] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.970349] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 1.979115] usbcore: registered new interface driver rndis_host
Oct 25 18:03:00 arm kernel: [ 1.985426] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 1.994314] usbcore: registered new interface driver cdc_ncm
Oct 25 18:03:00 arm kernel: [ 2.000303] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.015077] usbcore: registered new interface driver cdc_acm
Oct 25 18:03:00 arm kernel: [ 2.021084] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Oct 25 18:03:00 arm kernel: [ 2.029481] Initializing USB Mass Storage driver...
Oct 25 18:03:00 arm kernel: [ 2.034645] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.045382] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.059791] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
Oct 25 18:03:00 arm kernel: [ 2.066021] usbcore: registered new interface driver usb-storage
Oct 25 18:03:00 arm kernel: [ 2.072334] USB Mass Storage support registered.
Oct 25 18:03:00 arm kernel: [ 2.078168] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
Oct 25 18:03:00 arm kernel: [ 2.085072] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 2.093794] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.102599] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.114059] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
Oct 25 18:03:00 arm kernel: [ 2.120882] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
Oct 25 18:03:00 arm kernel: [ 2.126132] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Oct 25 18:03:00 arm kernel: [ 2.135877] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
Oct 25 18:03:00 arm kernel: [ 2.144486] platform 4830e000.fb: alias fck already exists
Oct 25 18:03:00 arm kernel: [ 2.150381] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Oct 25 18:03:00 arm kernel: [ 2.150403] musb-hdrc: MHDRC RTL version 2.0
Oct 25 18:03:00 arm kernel: [ 2.150417] musb-hdrc: setup fifo_mode 4
Oct 25 18:03:00 arm kernel: [ 2.150444] musb-hdrc: 28/31 max ep, 16384/16384 memory
Oct 25 18:03:00 arm kernel: [ 2.150608] musb-hdrc musb-hdrc.0.auto: *** mode=3
Oct 25 18:03:00 arm kernel: [ 2.155703] musb-hdrc musb-hdrc.0.auto: *** power=250
Oct 25 18:03:00 arm kernel: [ 2.162777] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
Oct 25 18:03:00 arm kernel: [ 2.169691] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Oct 25 18:03:00 arm kernel: [ 2.178318] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.187867] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
Oct 25 18:03:00 arm kernel: [ 2.193141] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Oct 25 18:03:00 arm kernel: [ 2.201954] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.210768] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
Oct 25 18:03:00 arm kernel: [ 2.225096] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Oct 25 18:03:00 arm kernel: [ 2.225116] musb-hdrc: MHDRC RTL version 2.0
Oct 25 18:03:00 arm kernel: [ 2.225129] musb-hdrc: setup fifo_mode 4
Oct 25 18:03:00 arm kernel: [ 2.225150] musb-hdrc: 28/31 max ep, 16384/16384 memory
Oct 25 18:03:00 arm kernel: [ 2.225286] musb-hdrc musb-hdrc.1.auto: *** mode=1
Oct 25 18:03:00 arm kernel: [ 2.230343] musb-hdrc musb-hdrc.1.auto: *** power=250
Oct 25 18:03:00 arm kernel: [ 2.235661] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 2.241880] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
Oct 25 18:03:00 arm kernel: [ 2.253787] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
Oct 25 18:03:00 arm kernel: [ 2.262087] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
Oct 25 18:03:00 arm kernel: [ 2.262208] usb usb1: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 2.262267] usb usb1: udev 1, busnum 1, minor = 0
Oct 25 18:03:00 arm kernel: [ 2.262289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 18:03:00 arm kernel: [ 2.269456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 18:03:00 arm kernel: [ 2.277050] usb usb1: Product: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 2.282275] usb usb1: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Oct 25 18:03:00 arm kernel: [ 2.288589] usb usb1: SerialNumber: musb-hdrc.1.auto
Oct 25 18:03:00 arm kernel: [ 2.294176] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
Oct 25 18:03:00 arm kernel: [ 2.303802] bone-capemgr bone_capemgr.9: slot #6: Failed verification
Oct 25 18:03:00 arm kernel: [ 2.310581] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Oct 25 18:03:00 arm kernel: [ 2.321093] usb usb1: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 2.321122] usb usb1: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 2.321198] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 2.321383] hub 1-0:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 2.321405] hub 1-0:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 2.321436] hub 1-0:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 2.325514] hub 1-0:1.0: 1 port detected
Oct 25 18:03:00 arm kernel: [ 2.329698] hub 1-0:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 2.329718] hub 1-0:1.0: individual port power switching
Oct 25 18:03:00 arm kernel: [ 2.329734] hub 1-0:1.0: no over-current protection
Oct 25 18:03:00 arm kernel: [ 2.329750] hub 1-0:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 2.329769] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
Oct 25 18:03:00 arm kernel: [ 2.329787] hub 1-0:1.0: power on to power good time: 10ms
Oct 25 18:03:00 arm kernel: [ 2.329831] hub 1-0:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 2.329935] hub 1-0:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 2.331094] mousedev: PS/2 mouse device common for all mice
Oct 25 18:03:00 arm kernel: [ 2.339722] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
Oct 25 18:03:00 arm kernel: [ 2.347572] i2c /dev entries driver
Oct 25 18:03:00 arm kernel: [ 2.352920] pps_ldisc: PPS line discipline registered
Oct 25 18:03:00 arm kernel: [ 2.358433] Driver for 1-wire Dallas network protocol.
Oct 25 18:03:00 arm kernel: [ 2.365782] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Oct 25 18:03:00 arm kernel: [ 2.373781] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
Oct 25 18:03:00 arm kernel: [ 2.382766] cpuidle: using governor ladder
Oct 25 18:03:00 arm kernel: [ 2.387131] cpuidle: using governor menu
Oct 25 18:03:00 arm kernel: [ 2.391707] of_get_named_gpio_flags exited with status 6
Oct 25 18:03:00 arm kernel: [ 2.391730] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.391744] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.391780] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
Oct 25 18:03:00 arm kernel: [ 2.399024] omap_hsmmc mmc.5: Failed to get rstctl; not using any
Oct 25 18:03:00 arm kernel: [ 2.405938] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
Oct 25 18:03:00 arm kernel: [ 2.413150] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
Oct 25 18:03:00 arm kernel: [ 2.420504] mmc.5 supply vmmc_aux not found, using dummy regulator
Oct 25 18:03:00 arm kernel: [ 2.427557] omap_hsmmc mmc.5: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.434499] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
Oct 25 18:03:00 arm kernel: [ 2.434576] hub 1-0:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 2.434620] usb usb1: bus auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 2.460805] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.460831] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.460845] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.460899] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.467103] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.475063] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
Oct 25 18:03:00 arm kernel: [ 2.481521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
Oct 25 18:03:00 arm kernel: [ 2.488651] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
Oct 25 18:03:00 arm kernel: [ 2.496190] mmc.11 supply vmmc_aux not found, using dummy regulator
Oct 25 18:03:00 arm kernel: [ 2.502934] omap_hsmmc mmc.11: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.537238] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
Oct 25 18:03:00 arm kernel: [ 2.548984] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
Oct 25 18:03:00 arm kernel: [ 2.556298] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Oct 25 18:03:00 arm kernel: [ 2.565331] usb usb1: usb wakeup-resume
Oct 25 18:03:00 arm kernel: [ 2.565378] usb usb1: usb auto-resume
Oct 25 18:03:00 arm kernel: [ 2.565406] hub 1-0:1.0: hub_resume
Oct 25 18:03:00 arm kernel: [ 2.565463] hub 1-0:1.0: port 1: status 0101 change 0001
Oct 25 18:03:00 arm kernel: [ 2.565716] leds-gpio gpio-leds.8: pins are not configured from the driver
Oct 25 18:03:00 arm kernel: [ 2.573019] of_get_named_gpio_flags exited with status 53
Oct 25 18:03:00 arm kernel: [ 2.573043] of_get_named_gpio_flags exited with status 54
Oct 25 18:03:00 arm kernel: [ 2.573062] of_get_named_gpio_flags exited with status 55
Oct 25 18:03:00 arm kernel: [ 2.573081] of_get_named_gpio_flags exited with status 56
Oct 25 18:03:00 arm kernel: [ 2.573240] of_get_named_gpio_flags exited with status 53
Oct 25 18:03:00 arm kernel: [ 2.573493] of_get_named_gpio_flags exited with status 54
Oct 25 18:03:00 arm kernel: [ 2.573697] of_get_named_gpio_flags exited with status 55
Oct 25 18:03:00 arm kernel: [ 2.573965] of_get_named_gpio_flags exited with status 56
Oct 25 18:03:00 arm kernel: [ 2.574564] ledtrig-cpu: registered to indicate activity on CPUs
Oct 25 18:03:00 arm kernel: [ 2.581429] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
Oct 25 18:03:00 arm kernel: [ 2.588714] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Oct 25 18:03:00 arm kernel: [ 2.597491] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Oct 25 18:03:00 arm kernel: [ 2.603841] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
Oct 25 18:03:00 arm kernel: [ 2.611088] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
Oct 25 18:03:00 arm kernel: [ 2.619576] usbcore: registered new interface driver usbhid
Oct 25 18:03:00 arm kernel: [ 2.625494] usbhid: USB HID core driver
Oct 25 18:03:00 arm kernel: [ 2.631058] ashmem: initialized
Oct 25 18:03:00 arm kernel: [ 2.634935] logger: created 256K log 'log_main'
Oct 25 18:03:00 arm kernel: [ 2.640148] logger: created 256K log 'log_events'
Oct 25 18:03:00 arm kernel: [ 2.645593] logger: created 256K log 'log_radio'
Oct 25 18:03:00 arm kernel: [ 2.650820] logger: created 256K log 'log_system'
Oct 25 18:03:00 arm kernel: [ 2.659057] of_get_named_gpio_flags exited with status 59
Oct 25 18:03:00 arm kernel: [ 2.660630] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
Oct 25 18:03:00 arm kernel: [ 2.668465] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Oct 25 18:03:00 arm kernel: [ 2.668538] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Oct 25 18:03:00 arm kernel: [ 2.672514] TCP: cubic registered
Oct 25 18:03:00 arm kernel: [ 2.676168] NET: Registered protocol family 10
Oct 25 18:03:00 arm kernel: [ 2.680945] mmc1: BKOPS_EN bit is not set
Oct 25 18:03:00 arm kernel: [ 2.686583] NET: Registered protocol family 17
Oct 25 18:03:00 arm kernel: [ 2.691841] Key type dns_resolver registered
Oct 25 18:03:00 arm kernel: [ 2.696694] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Oct 25 18:03:00 arm kernel: [ 2.704878] ThumbEE CPU extension supported.
Oct 25 18:03:00 arm kernel: [ 2.709439] Registering SWP/SWPB emulation handler
Oct 25 18:03:00 arm kernel: [ 2.715293] mmc1: new high speed MMC card at address 0001
Oct 25 18:03:00 arm kernel: [ 2.721799] registered taskstats version 1
Oct 25 18:03:00 arm kernel: [ 2.727049] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
Oct 25 18:03:00 arm kernel: [ 2.734492] of_get_named_gpio_flags: can't parse gpios property
Oct 25 18:03:00 arm kernel: [ 2.734526] tilcdc 4830e000.fb: No power control GPIO
Oct 25 18:03:00 arm kernel: [ 2.740387] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
Oct 25 18:03:00 arm kernel: [ 2.747800] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
Oct 25 18:03:00 arm kernel: [ 2.763606] mmcblk0: p1 p2
Oct 25 18:03:00 arm kernel: [ 2.773219] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Oct 25 18:03:00 arm kernel: [ 2.780422] mmcblk0boot1: unknown partition table
Oct 25 18:03:00 arm kernel: [ 2.787900] mmcblk0boot0: unknown partition table
Oct 25 18:03:00 arm kernel: [ 2.877687] tilcdc 4830e000.fb: found TDA19988
Oct 25 18:03:00 arm kernel: [ 2.883166] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 25 18:03:00 arm kernel: [ 2.890134] [drm] No driver support for vblank timestamp query.
Oct 25 18:03:00 arm kernel: [ 2.897026] tilcdc 4830e000.fb: No connectors reported connected with modes
Oct 25 18:03:00 arm kernel: [ 2.904366] [drm] Cannot find any crtc or sizes - going 1024x768
Oct 25 18:03:00 arm kernel: [ 2.925041] Console: switching to colour frame buffer device 128x48
Oct 25 18:03:00 arm kernel: [ 2.940908] tilcdc 4830e000.fb: fb0: frame buffer device
Oct 25 18:03:00 arm kernel: [ 2.946587] tilcdc 4830e000.fb: registered panic notifier
Oct 25 18:03:00 arm kernel: [ 2.952298] usb 1-1: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 2.952367] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
Oct 25 18:03:00 arm kernel: [ 2.974275] usb 1-1: udev 2, busnum 1, minor = 1
Oct 25 18:03:00 arm kernel: [ 2.974309] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Oct 25 18:03:00 arm kernel: [ 2.981368] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 25 18:03:00 arm kernel: [ 2.988860] usb 1-1: Product: USB2.0 Hub
Oct 25 18:03:00 arm kernel: [ 2.993557] usb 1-1: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 2.993586] usb 1-1: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 2.993979] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 2.994200] hub 1-1:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 2.994222] hub 1-1:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 2.994257] hub 1-1:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 2.998558] hub 1-1:1.0: 4 ports detected
Oct 25 18:03:00 arm kernel: [ 3.002811] hub 1-1:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 3.002831] hub 1-1:1.0: ganged power switching
Oct 25 18:03:00 arm kernel: [ 3.002847] hub 1-1:1.0: global over-current protection
Oct 25 18:03:00 arm kernel: [ 3.002864] hub 1-1:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 3.002883] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Oct 25 18:03:00 arm kernel: [ 3.002899] hub 1-1:1.0: Port indicators are supported
Oct 25 18:03:00 arm kernel: [ 3.002916] hub 1-1:1.0: power on to power good time: 100ms
Oct 25 18:03:00 arm kernel: [ 3.003326] hub 1-1:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 3.003348] hub 1-1:1.0: no over-current condition exists
Oct 25 18:03:00 arm kernel: [ 3.003791] hub 1-1:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 3.005284] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Oct 25 18:03:00 arm kernel: [ 3.005336] hub 1-0:1.0: port 1 enable change, status 00000503
Oct 25 18:03:00 arm kernel: [ 3.009379] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
Oct 25 18:03:00 arm kernel: [ 3.015797] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
Oct 25 18:03:00 arm kernel: [ 3.032893] libphy: 4a101000.mdio: probed
Oct 25 18:03:00 arm kernel: [ 3.037174] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Oct 25 18:03:00 arm kernel: [ 3.047090] Detected MACID = 90:59:af:55:5c:07
Oct 25 18:03:00 arm kernel: [ 3.051794] cpsw 4a100000.ethernet: NAPI disabled
Oct 25 18:03:00 arm kernel: [ 3.058957] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00
Oct 25 18:03:00 arm kernel: [ 3.078658] #0: TI BeagleBone Black
Oct 25 18:03:00 arm kernel: [ 3.083320] Freeing init memory: 292K
Oct 25 18:03:00 arm kernel: [ 3.106004] hub 1-1:1.0: port 3: status 0101 change 0001
Oct 25 18:03:00 arm kernel: [ 3.206800] hub 1-1:1.0: state 7 ports 4 chg 0008 evt 0000
Oct 25 18:03:00 arm kernel: [ 3.207129] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
Oct 25 18:03:00 arm kernel: [ 3.273383] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc
Oct 25 18:03:00 arm kernel: [ 3.373774] usb 1-1.3: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 3.374092] usb 1-1.3: udev 3, busnum 1, minor = 2
Oct 25 18:03:00 arm kernel: [ 3.374109] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
Oct 25 18:03:00 arm kernel: [ 3.381392] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 25 18:03:00 arm kernel: [ 3.389062] usb 1-1.3: Product: USB2.0 Hub
Oct 25 18:03:00 arm kernel: [ 3.398595] usb 1-1.3: usb_probe_device
Oct 25 18:03:00 arm kernel: [ 3.398624] usb 1-1.3: configuration #1 chosen from 1 choice
Oct 25 18:03:00 arm kernel: [ 3.400127] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Oct 25 18:03:00 arm kernel: [ 3.400302] hub 1-1.3:1.0: usb_probe_interface
Oct 25 18:03:00 arm kernel: [ 3.400319] hub 1-1.3:1.0: usb_probe_interface - got id
Oct 25 18:03:00 arm kernel: [ 3.400345] hub 1-1.3:1.0: USB hub found
Oct 25 18:03:00 arm kernel: [ 3.409441] hub 1-1.3:1.0: 4 ports detected
Oct 25 18:03:00 arm kernel: [ 3.417707] hub 1-1.3:1.0: standalone hub
Oct 25 18:03:00 arm kernel: [ 3.417731] hub 1-1.3:1.0: ganged power switching
Oct 25 18:03:00 arm kernel: [ 3.417741] hub 1-1.3:1.0: global over-current protection
Oct 25 18:03:00 arm kernel: [ 3.417751] hub 1-1.3:1.0: Single TT
Oct 25 18:03:00 arm kernel: [ 3.417763] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
Oct 25 18:03:00 arm kernel: [ 3.417772] hub 1-1.3:1.0: Port indicators are supported
Oct 25 18:03:00 arm kernel: [ 3.417782] hub 1-1.3:1.0: power on to power good time: 100ms
Oct 25 18:03:00 arm kernel: [ 3.419894] hub 1-1.3:1.0: local power source is good
Oct 25 18:03:00 arm kernel: [ 3.419911] hub 1-1.3:1.0: no over-current condition exists
Oct 25 18:03:00 arm kernel: [ 3.420135] hub 1-1.3:1.0: enabling power on all ports
Oct 25 18:03:00 arm kernel: [ 3.522299] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0000
Oct 25 18:03:00 arm kernel: [ 3.523428] hub 1-1.3:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.523942] usb 1-1.3: usb auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 3.537861] hub 1-1:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.540383] usb 1-1: usb auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 3.552439] hub 1-0:1.0: hub_suspend
Oct 25 18:03:00 arm kernel: [ 3.552482] usb usb1: bus auto-suspend, wakeup 1
Oct 25 18:03:00 arm kernel: [ 4.570215] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 18:03:00 arm kernel: [ 8.210986] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Oct 25 18:03:00 arm kernel: [ 8.529134] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Oct 25 18:03:00 arm kernel: [ 14.197513] net eth0: initializing cpsw version 1.12 (0)
Oct 25 18:03:00 arm kernel: [ 14.205331] net eth0: phy found : id is : 0x7c0f1
Oct 25 18:03:00 arm kernel: [ 14.210293] libphy: PHY 4a101000.mdio:01 not found
Oct 25 18:03:00 arm kernel: [ 14.215325] net eth0: phy 4a101000.mdio:01 not found on slave 1
Oct 25 18:03:00 arm kernel: [ 14.227433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 18:03:00 arm kernel: [ 17.283292] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Oct 25 18:03:00 arm kernel: [ 17.289318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 18:03:00 arm kernel: [ 23.617789] gadget: using random self ethernet address
Oct 25 18:03:00 arm kernel: [ 23.639442] usb0: MAC 8e:5b:87:f1:2d:ff
Oct 25 18:03:00 arm kernel: [ 23.643585] usb0: HOST MAC 90:59:af:55:5c:09
Oct 25 18:03:00 arm kernel: [ 23.675522] gadget: Mass Storage Function, version: 2009/09/11
Oct 25 18:03:00 arm kernel: [ 23.681819] gadget: Number of LUNs=1
Oct 25 18:03:00 arm kernel: [ 23.703925] lun0: LUN: removable file: /dev/mmcblk0p1
Oct 25 18:03:00 arm kernel: [ 23.731256] gadget: Multifunction Composite Gadget
Oct 25 18:03:00 arm kernel: [ 23.755595] gadget: g_multi ready
Oct 25 18:03:00 arm kernel: [ 23.774386] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 23.795704] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
Oct 25 18:03:00 arm kernel: [ 23.821914] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
Oct 25 18:03:00 arm kernel: [ 23.822019] usb usb2: default language 0x0409
Oct 25 18:03:00 arm kernel: [ 23.822055] usb usb2: udev 1, busnum 2, minor = 128
Oct 25 18:03:00 arm kernel: [ 23.822069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 18:03:00 arm kernel: [ 23.829238] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 18:03:00 arm kernel: [ 23.836840] usb usb2: Product: MUSB HDRC host driver
Oct 25 18:03:00 arm kernel: [ 23.842053] usb usb2: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Oct 25 18:03:00 arm kernel: [ 23.848353] usb usb2: SerialNumber: musb-hdrc.0.auto
Oct 25 18:03:01 arm kernel: [ 23.874727] usb usb2: usb_probe_device
Oct 25 18:03:01 arm kernel: [ 23.874754] usb usb2: configuration #1 chosen from 1 choice
Oct 25 18:03:01 arm kernel: [ 23.874825] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Oct 25 18:03:01 arm kernel: [ 23.875031] hub 2-0:1.0: usb_probe_interface
Oct 25 18:03:01 arm kernel: [ 23.875047] hub 2-0:1.0: usb_probe_interface - got id
Oct 25 18:03:01 arm kernel: [ 23.875069] hub 2-0:1.0: USB hub found
Oct 25 18:03:01 arm kernel: [ 23.902047] hub 2-0:1.0: 1 port detected
Oct 25 18:03:01 arm kernel: [ 23.917708] hub 2-0:1.0: standalone hub
Oct 25 18:03:01 arm kernel: [ 23.917735] hub 2-0:1.0: individual port power switching
Oct 25 18:03:01 arm kernel: [ 23.917745] hub 2-0:1.0: no over-current protection
Oct 25 18:03:01 arm kernel: [ 23.917755] hub 2-0:1.0: Single TT
Oct 25 18:03:01 arm kernel: [ 23.917767] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
Oct 25 18:03:01 arm kernel: [ 23.917777] hub 2-0:1.0: power on to power good time: 10ms
Oct 25 18:03:01 arm kernel: [ 23.917829] hub 2-0:1.0: local power source is good
Oct 25 18:03:01 arm kernel: [ 23.917939] hub 2-0:1.0: enabling power on all ports
Oct 25 18:03:01 arm kernel: [ 24.019352] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
Oct 25 18:03:01 arm kernel: [ 24.019425] hub 2-0:1.0: hub_suspend
Oct 25 18:03:01 arm kernel: [ 24.019458] usb usb2: bus auto-suspend, wakeup 1
Oct 25 18:03:02 arm /usr/sbin/cron[1892]: (CRON) INFO (pidfile fd = 3)
Oct 25 18:03:02 arm /usr/sbin/cron[1897]: (CRON) STARTUP (fork ok)
Oct 25 18:03:02 arm /usr/sbin/cron[1897]: (CRON) INFO (Running @reboot jobs)
Oct 25 18:03:02 arm udhcpd[1991]: udhcpd (v1.20.2) started
Oct 25 18:03:02 arm udhcpd[1991]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Oct 25 18:03:02 arm udhcpd[1991]: is interface usb0 up and configured?: Cannot assign requested address
Oct 25 18:03:03 arm udhcpd[2034]: udhcpd (v1.20.2) started
Oct 25 18:03:03 arm udhcpd[2034]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Oct 25 18:03:03 arm udhcpd[2034]: is interface usb0 up and configured?: Cannot assign requested address
Oct 25 18:03:03 arm kernel: [ 26.125707] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Oct 25 18:03:03 arm udhcpd[2037]: udhcpd (v1.20.2) started
Oct 25 18:03:03 arm udhcpd[2037]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Nov 8 18:15:30 arm ntpdate[1544]: step time server 192.53.103.108 offset 1210341.873370 sec
Nov 8 18:15:45 arm ntpdate[2045]: adjust time server 192.53.103.108 offset -0.000066 sec
Nov 8 18:17:02 arm /USR/SBIN/CRON[2047]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Nov 8 18:33:22 arm shutdown[3087]: shutting down for system reboot
Nov 8 18:33:23 arm init: Switching to runlevel: 6
Nov 8 18:33:23 arm udhcpd[2037]: Received SIGTERM
Nov 8 18:33:55 arm kernel: imklog 5.8.11, log source = /proc/kmsg started.
Nov 8 18:33:55 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1657" x-info="http://www.rsyslog.com"] start
Nov 8 18:33:56 arm kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Nov 8 18:33:56 arm kernel: [ 0.000000] Initializing cgroup subsys cpu
Nov 8 18:33:56 arm kernel: [ 0.000000] Linux version 3.8.13-bone28 (beaglebone@beaglebone-VirtualBox) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 Fri Oct 11 19:18:46 CEST 2013
Nov 8 18:33:56 arm kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Nov 8 18:33:56 arm kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Nov 8 18:33:56 arm kernel: [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Nov 8 18:33:56 arm kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Nov 8 18:33:56 arm kernel: [ 0.000000] On node 0 totalpages: 130816
Nov 8 18:33:56 arm kernel: [ 0.000000] free_area_init_node: node 0, pgdat c09897a8, node_mem_map c09fd000
Nov 8 18:33:56 arm kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Nov 8 18:33:56 arm kernel: [ 0.000000] Normal zone: 0 pages reserved
Nov 8 18:33:56 arm kernel: [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
Nov 8 18:33:56 arm kernel: [ 0.000000] AM335X ES1.0 (neon )
Nov 8 18:33:56 arm kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Nov 8 18:33:56 arm kernel: [ 0.000000] pcpu-alloc: [0] 0
Nov 8 18:33:56 arm kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
Nov 8 18:33:56 arm kernel: [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=c861578f-d3dd-4858-9122-978b2a769e51 ro rootfstype=ext4 rootwait fixrtc ip=
Nov 8 18:33:56 arm kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Nov 8 18:33:56 arm kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 8 18:33:56 arm kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 8 18:33:56 arm kernel: [ 0.000000] __ex_table already sorted, skipping sort
Nov 8 18:33:56 arm kernel: [ 0.000000] allocated 1048576 bytes of page_cgroup
Nov 8 18:33:56 arm kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 8 18:33:56 arm kernel: [ 0.000000] Memory: 511MB = 511MB total
Nov 8 18:33:56 arm kernel: [ 0.000000] Memory: 504872k/504872k available, 19416k reserved, 0K highmem
Nov 8 18:33:56 arm kernel: [ 0.000000] Virtual kernel memory layout:
Nov 8 18:33:56 arm kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Nov 8 18:33:56 arm kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Nov 8 18:33:56 arm kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Nov 8 18:33:56 arm kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Nov 8 18:33:56 arm kernel: [ 0.000000] .text : 0xc0008000 - 0xc08c32e8 (8941 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] .init : 0xc08c4000 - 0xc0907734 ( 270 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] .data : 0xc0908000 - 0xc098c480 ( 530 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] .bss : 0xc098c480 - 0xc09fcdd8 ( 451 kB)
Nov 8 18:33:56 arm kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Nov 8 18:33:56 arm kernel: [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Nov 8 18:33:56 arm kernel: [ 0.000000] Total of 128 interrupts on 1 active controller
Nov 8 18:33:56 arm kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
Nov 8 18:33:56 arm kernel: [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Nov 8 18:33:56 arm kernel: [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
Nov 8 18:33:56 arm kernel: [ 0.000000] Console: colour dummy device 80x30
Nov 8 18:33:56 arm kernel: [ 0.000328] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
Nov 8 18:33:56 arm kernel: [ 0.017395] pid_max: default: 32768 minimum: 301
Nov 8 18:33:56 arm kernel: [ 0.017545] Security Framework initialized
Nov 8 18:33:56 arm kernel: [ 0.017607] Mount-cache hash table entries: 512
Nov 8 18:33:56 arm kernel: [ 0.025391] Initializing cgroup subsys cpuacct
Nov 8 18:33:56 arm kernel: [ 0.025430] Initializing cgroup subsys memory
Nov 8 18:33:56 arm kernel: [ 0.025503] Initializing cgroup subsys blkio
Nov 8 18:33:56 arm kernel: [ 0.025627] CPU: Testing write buffer coherency: ok
Nov 8 18:33:56 arm kernel: [ 0.026091] Setting up static identity map for 0x805f8d68 - 0x805f8dc0
Nov 8 18:33:56 arm kernel: [ 0.027821] devtmpfs: initialized
Nov 8 18:33:56 arm kernel: [ 0.087064] pinctrl core: initialized pinctrl subsystem
Nov 8 18:33:56 arm kernel: [ 0.087207] rstctl core: initialized rstctl subsystem
Nov 8 18:33:56 arm kernel: [ 0.087642] regulator-dummy: no parameters
Nov 8 18:33:56 arm kernel: [ 0.088115] NET: Registered protocol family 16
Nov 8 18:33:56 arm kernel: [ 0.088995] DMA: preallocated 256 KiB pool for atomic coherent allocations
Nov 8 18:33:56 arm kernel: [ 0.098766] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
Nov 8 18:33:56 arm kernel: [ 0.099409] platform 49000000.edma: alias fck already exists
Nov 8 18:33:56 arm kernel: [ 0.099486] platform 49000000.edma: alias fck already exists
Nov 8 18:33:56 arm kernel: [ 0.099512] platform 49000000.edma: alias fck already exists
Nov 8 18:33:56 arm kernel: [ 0.100419] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Nov 8 18:33:56 arm kernel: [ 0.100544] OMAP GPIO hardware version 0.1
Nov 8 18:33:56 arm kernel: [ 0.101729] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Nov 8 18:33:56 arm kernel: [ 0.102734] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Nov 8 18:33:56 arm kernel: [ 0.103799] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Nov 8 18:33:56 arm kernel: [ 0.104207] of_get_named_gpio_flags exited with status 52
Nov 8 18:33:56 arm kernel: [ 0.104234] gpio-rctrl rstctl.4: loaded OK
Nov 8 18:33:56 arm kernel: [ 0.108704] hw-breakpoint: debug architecture 0x4 unsupported.
Nov 8 18:33:56 arm kernel: [ 0.110673] cpsw.0: No hwaddr in dt. Using 90:59:af:55:5c:07 from efuse
Nov 8 18:33:56 arm kernel: [ 0.110704] cpsw.1: No hwaddr in dt. Using 90:59:af:55:5c:09 from efuse
Nov 8 18:33:56 arm kernel: [ 0.122127] bio: create slab <bio-0> at 0
Nov 8 18:33:56 arm kernel: [ 0.131906] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
Nov 8 18:33:56 arm kernel: [ 0.132114] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 0.132326] vmmcsd_fixed: 3300 mV
Nov 8 18:33:56 arm kernel: [ 0.134661] SCSI subsystem initialized
Nov 8 18:33:56 arm kernel: [ 0.135038] usbcore: registered new interface driver usbfs
Nov 8 18:33:56 arm kernel: [ 0.135134] usbcore: registered new interface driver hub
Nov 8 18:33:56 arm kernel: [ 0.135398] usbcore: registered new device driver usb
Nov 8 18:33:56 arm kernel: [ 0.137243] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Nov 8 18:33:56 arm kernel: [ 0.138638] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
Nov 8 18:33:56 arm kernel: [ 0.140113] DCDC1: at 1500 mV
Nov 8 18:33:56 arm kernel: [ 0.141143] vdd_mpu: 925 <--> 1325 mV at 950 mV
Nov 8 18:33:56 arm kernel: [ 0.142065] vdd_core: 925 <--> 1150 mV at 1100 mV
Nov 8 18:33:56 arm kernel: [ 0.143026] LDO1: at 1800 mV
Nov 8 18:33:56 arm kernel: [ 0.143931] LDO2: at 3300 mV
Nov 8 18:33:56 arm kernel: [ 0.145597] LDO3: 1800 mV
Nov 8 18:33:56 arm kernel: [ 0.146530] LDO4: at 3300 mV
Nov 8 18:33:56 arm kernel: [ 0.147364] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Nov 8 18:33:56 arm kernel: [ 0.148059] omap_i2c 44e0b000.i2c: unable to select pin group
Nov 8 18:33:56 arm kernel: [ 0.148782] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
Nov 8 18:33:56 arm kernel: [ 0.150766] omap_i2c 4819c000.i2c: unable to select pin group
Nov 8 18:33:56 arm kernel: [ 0.150972] media: Linux media interface: v0.10
Nov 8 18:33:56 arm kernel: [ 0.151076] Linux video capture interface: v2.00
Nov 8 18:33:56 arm kernel: [ 0.151188] pps_core: LinuxPPS API ver. 1 registered
Nov 8 18:33:56 arm kernel: [ 0.151203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Nov 8 18:33:56 arm kernel: [ 0.151833] Advanced Linux Sound Architecture Driver Initialized.
Nov 8 18:33:56 arm kernel: [ 0.152708] NetLabel: Initializing
Nov 8 18:33:56 arm kernel: [ 0.152728] NetLabel: domain hash size = 128
Nov 8 18:33:56 arm kernel: [ 0.152738] NetLabel: protocols = UNLABELED CIPSOv4
Nov 8 18:33:56 arm kernel: [ 0.152838] NetLabel: unlabeled traffic allowed by default
Nov 8 18:33:56 arm kernel: [ 0.153177] Switching to clocksource gp_timer
Nov 8 18:33:56 arm kernel: [ 0.195101] NET: Registered protocol family 2
Nov 8 18:33:56 arm kernel: [ 0.195990] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Nov 8 18:33:56 arm kernel: [ 0.196130] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Nov 8 18:33:56 arm kernel: [ 0.196358] TCP: Hash tables configured (established 4096 bind 4096)
Nov 8 18:33:56 arm kernel: [ 0.196466] TCP: reno registered
Nov 8 18:33:56 arm kernel: [ 0.196491] UDP hash table entries: 256 (order: 1, 12288 bytes)
Nov 8 18:33:56 arm kernel: [ 0.196536] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
Nov 8 18:33:56 arm kernel: [ 0.196906] NET: Registered protocol family 1
Nov 8 18:33:56 arm kernel: [ 0.197406] RPC: Registered named UNIX socket transport module.
Nov 8 18:33:56 arm kernel: [ 0.197424] RPC: Registered udp transport module.
Nov 8 18:33:56 arm kernel: [ 0.197436] RPC: Registered tcp transport module.
Nov 8 18:33:56 arm kernel: [ 0.197447] RPC: Registered tcp NFSv4.1 backchannel transport module.
Nov 8 18:33:56 arm kernel: [ 0.197775] Trying to unpack rootfs image as initramfs...
Nov 8 18:33:56 arm kernel: [ 0.496612] Freeing initrd memory: 2516K
Nov 8 18:33:56 arm kernel: [ 0.497127] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Nov 8 18:33:56 arm kernel: [ 0.497461] CPU PMU: attempt to register multiple PMU devices!
Nov 8 18:33:56 arm kernel: [ 0.497500] arm-pmu: probe of arm-pmu failed with error -28
Nov 8 18:33:56 arm kernel: [ 0.497938] omap2_mbox_probe: platform not supported
Nov 8 18:33:56 arm kernel: [ 0.766993] VFS: Disk quotas dquot_6.5.2
Nov 8 18:33:56 arm kernel: [ 0.767086] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 8 18:33:56 arm kernel: [ 0.767969] NFS: Registering the id_resolver key type
Nov 8 18:33:56 arm kernel: [ 0.768106] Key type id_resolver registered
Nov 8 18:33:56 arm kernel: [ 0.768121] Key type id_legacy registered
Nov 8 18:33:56 arm kernel: [ 0.768184] fuse init (API version 7.20)
Nov 8 18:33:56 arm kernel: [ 0.768995] Btrfs loaded
Nov 8 18:33:56 arm kernel: [ 0.769127] msgmni has been set to 990
Nov 8 18:33:56 arm kernel: [ 0.770931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Nov 8 18:33:56 arm kernel: [ 0.770954] io scheduler noop registered
Nov 8 18:33:56 arm kernel: [ 0.770967] io scheduler deadline registered
Nov 8 18:33:56 arm kernel: [ 0.770996] io scheduler cfq registered (default)
Nov 8 18:33:56 arm kernel: [ 0.772659] tps65217-bl tps65217-bl: no platform data provided
Nov 8 18:33:56 arm kernel: [ 0.772697] tps65217-bl: probe of tps65217-bl failed with error -22
Nov 8 18:33:56 arm kernel: [ 0.773418] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 8 18:33:56 arm kernel: [ 0.775614] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
Nov 8 18:33:56 arm kernel: [ 0.775877] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
Nov 8 18:33:56 arm kernel: [ 1.492827] console [ttyO0] enabled
Nov 8 18:33:56 arm kernel: [ 1.497569] [drm] Initialized drm 1.1.0 20060810
Nov 8 18:33:56 arm kernel: [ 1.511955] brd: module loaded
Nov 8 18:33:56 arm kernel: [ 1.519944] loop: module loaded
Nov 8 18:33:56 arm kernel: [ 1.523386] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Nov 8 18:33:56 arm kernel: [ 1.530651] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Nov 8 18:33:56 arm kernel: [ 1.537902] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Nov 8 18:33:56 arm kernel: [ 1.545153] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Nov 8 18:33:56 arm kernel: [ 1.552401] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Nov 8 18:33:56 arm kernel: [ 1.566476] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2613BBBK6613'
Nov 8 18:33:56 arm kernel: [ 1.574256] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
Nov 8 18:33:56 arm kernel: [ 1.612231] bone-capemgr bone_capemgr.9: slot #0: No cape found
Nov 8 18:33:56 arm kernel: [ 1.649335] bone-capemgr bone_capemgr.9: slot #1: No cape found
Nov 8 18:33:56 arm kernel: [ 1.686444] bone-capemgr bone_capemgr.9: slot #2: No cape found
Nov 8 18:33:56 arm kernel: [ 1.723553] bone-capemgr bone_capemgr.9: slot #3: No cape found
Nov 8 18:33:56 arm kernel: [ 1.729802] bone-capemgr bone_capemgr.9: slot #4: specific override
Nov 8 18:33:56 arm kernel: [ 1.736392] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
Nov 8 18:33:56 arm kernel: [ 1.744418] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
Nov 8 18:33:56 arm kernel: [ 1.754565] bone-capemgr bone_capemgr.9: slot #5: specific override
Nov 8 18:33:56 arm kernel: [ 1.761153] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
Nov 8 18:33:56 arm kernel: [ 1.769178] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
Nov 8 18:33:56 arm kernel: [ 1.779194] bone-capemgr bone_capemgr.9: slot #6: specific override
Nov 8 18:33:56 arm kernel: [ 1.785775] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
Nov 8 18:33:56 arm kernel: [ 1.793800] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
Nov 8 18:33:56 arm kernel: [ 1.804329] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.813191] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.822036] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.830791] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.839469] bone-capemgr bone_capemgr.9: initialized OK.
Nov 8 18:33:56 arm kernel: [ 1.845058] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 1.853895] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 1.863931] OneNAND driver initializing
Nov 8 18:33:56 arm kernel: [ 1.869281] usbcore: registered new interface driver cdc_ether
Nov 8 18:33:56 arm kernel: [ 1.875453] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.884295] usbcore: registered new interface driver rndis_host
Nov 8 18:33:56 arm kernel: [ 1.890581] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 1.899258] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 1.908102] usbcore: registered new interface driver cdc_ncm
Nov 8 18:33:56 arm kernel: [ 1.914069] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
Nov 8 18:33:56 arm kernel: [ 1.928331] usbcore: registered new interface driver cdc_acm
Nov 8 18:33:56 arm kernel: [ 1.934287] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Nov 8 18:33:56 arm kernel: [ 1.942663] Initializing USB Mass Storage driver...
Nov 8 18:33:56 arm kernel: [ 1.947804] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
Nov 8 18:33:56 arm kernel: [ 1.958506] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
Nov 8 18:33:56 arm kernel: [ 1.972874] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
Nov 8 18:33:56 arm kernel: [ 1.979044] usbcore: registered new interface driver usb-storage
Nov 8 18:33:56 arm kernel: [ 1.985357] USB Mass Storage support registered.
Nov 8 18:33:56 arm kernel: [ 1.991020] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
Nov 8 18:33:56 arm kernel: [ 1.997908] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 2.006867] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 2.015657] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
Nov 8 18:33:56 arm kernel: [ 2.027090] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
Nov 8 18:33:56 arm kernel: [ 2.033810] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
Nov 8 18:33:56 arm kernel: [ 2.039059] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Nov 8 18:33:56 arm kernel: [ 2.048753] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
Nov 8 18:33:56 arm kernel: [ 2.056795] platform 4830e000.fb: alias fck already exists
Nov 8 18:33:56 arm kernel: [ 2.062648] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Nov 8 18:33:56 arm kernel: [ 2.062669] musb-hdrc: MHDRC RTL version 2.0
Nov 8 18:33:56 arm kernel: [ 2.062683] musb-hdrc: setup fifo_mode 4
Nov 8 18:33:56 arm kernel: [ 2.062709] musb-hdrc: 28/31 max ep, 16384/16384 memory
Nov 8 18:33:56 arm kernel: [ 2.062867] musb-hdrc musb-hdrc.0.auto: *** mode=3
Nov 8 18:33:56 arm kernel: [ 2.067915] musb-hdrc musb-hdrc.0.auto: *** power=250
Nov 8 18:33:56 arm kernel: [ 2.074524] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
Nov 8 18:33:56 arm kernel: [ 2.081407] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Nov 8 18:33:56 arm kernel: [ 2.090001] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 2.099437] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
Nov 8 18:33:56 arm kernel: [ 2.104690] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Nov 8 18:33:56 arm kernel: [ 2.113452] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 2.122369] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
Nov 8 18:33:56 arm kernel: [ 2.136682] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Nov 8 18:33:56 arm kernel: [ 2.136701] musb-hdrc: MHDRC RTL version 2.0
Nov 8 18:33:56 arm kernel: [ 2.136713] musb-hdrc: setup fifo_mode 4
Nov 8 18:33:56 arm kernel: [ 2.136735] musb-hdrc: 28/31 max ep, 16384/16384 memory
Nov 8 18:33:56 arm kernel: [ 2.136865] musb-hdrc musb-hdrc.1.auto: *** mode=1
Nov 8 18:33:56 arm kernel: [ 2.141905] musb-hdrc musb-hdrc.1.auto: *** power=250
Nov 8 18:33:56 arm kernel: [ 2.147206] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
Nov 8 18:33:56 arm kernel: [ 2.153262] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
Nov 8 18:33:56 arm kernel: [ 2.164968] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
Nov 8 18:33:56 arm kernel: [ 2.173208] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
Nov 8 18:33:56 arm kernel: [ 2.173316] usb usb1: default language 0x0409
Nov 8 18:33:56 arm kernel: [ 2.173368] usb usb1: udev 1, busnum 1, minor = 0
Nov 8 18:33:56 arm kernel: [ 2.173389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Nov 8 18:33:56 arm kernel: [ 2.180517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 8 18:33:56 arm kernel: [ 2.188083] usb usb1: Product: MUSB HDRC host driver
Nov 8 18:33:56 arm kernel: [ 2.193292] usb usb1: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Nov 8 18:33:56 arm kernel: [ 2.199586] usb usb1: SerialNumber: musb-hdrc.1.auto
Nov 8 18:33:56 arm kernel: [ 2.205106] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
Nov 8 18:33:56 arm kernel: [ 2.214703] bone-capemgr bone_capemgr.9: slot #6: Failed verification
Nov 8 18:33:56 arm kernel: [ 2.221472] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Nov 8 18:33:56 arm kernel: [ 2.231937] usb usb1: usb_probe_device
Nov 8 18:33:56 arm kernel: [ 2.231967] usb usb1: configuration #1 chosen from 1 choice
Nov 8 18:33:56 arm kernel: [ 2.232039] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Nov 8 18:33:56 arm kernel: [ 2.232205] hub 1-0:1.0: usb_probe_interface
Nov 8 18:33:56 arm kernel: [ 2.232226] hub 1-0:1.0: usb_probe_interface - got id
Nov 8 18:33:56 arm kernel: [ 2.232254] hub 1-0:1.0: USB hub found
Nov 8 18:33:56 arm kernel: [ 2.236244] hub 1-0:1.0: 1 port detected
Nov 8 18:33:56 arm kernel: [ 2.240370] hub 1-0:1.0: standalone hub
Nov 8 18:33:56 arm kernel: [ 2.240388] hub 1-0:1.0: individual port power switching
Nov 8 18:33:56 arm kernel: [ 2.240404] hub 1-0:1.0: no over-current protection
Nov 8 18:33:56 arm kernel: [ 2.240419] hub 1-0:1.0: Single TT
Nov 8 18:33:56 arm kernel: [ 2.240438] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
Nov 8 18:33:56 arm kernel: [ 2.240455] hub 1-0:1.0: power on to power good time: 10ms
Nov 8 18:33:56 arm kernel: [ 2.240493] hub 1-0:1.0: local power source is good
Nov 8 18:33:56 arm kernel: [ 2.240583] hub 1-0:1.0: enabling power on all ports
Nov 8 18:33:56 arm kernel: [ 2.241574] mousedev: PS/2 mouse device common for all mice
Nov 8 18:33:56 arm kernel: [ 2.249562] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
Nov 8 18:33:56 arm kernel: [ 2.257044] 44e3e000.rtc: already running
Nov 8 18:33:56 arm kernel: [ 2.261501] i2c /dev entries driver
Nov 8 18:33:56 arm kernel: [ 2.266575] pps_ldisc: PPS line discipline registered
Nov 8 18:33:56 arm kernel: [ 2.272019] Driver for 1-wire Dallas network protocol.
Nov 8 18:33:56 arm kernel: [ 2.279052] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Nov 8 18:33:56 arm kernel: [ 2.286896] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
Nov 8 18:33:56 arm kernel: [ 2.295813] cpuidle: using governor ladder
Nov 8 18:33:56 arm kernel: [ 2.300115] cpuidle: using governor menu
Nov 8 18:33:56 arm kernel: [ 2.304601] of_get_named_gpio_flags exited with status 6
Nov 8 18:33:56 arm kernel: [ 2.304619] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.304632] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.304666] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
Nov 8 18:33:56 arm kernel: [ 2.311887] omap_hsmmc mmc.5: Failed to get rstctl; not using any
Nov 8 18:33:56 arm kernel: [ 2.318673] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
Nov 8 18:33:56 arm kernel: [ 2.325862] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
Nov 8 18:33:56 arm kernel: [ 2.333180] mmc.5 supply vmmc_aux not found, using dummy regulator
Nov 8 18:33:56 arm kernel: [ 2.340077] omap_hsmmc mmc.5: pins are not configured from the driver
Nov 8 18:33:56 arm kernel: [ 2.346979] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
Nov 8 18:33:56 arm kernel: [ 2.347050] hub 1-0:1.0: hub_suspend
Nov 8 18:33:56 arm kernel: [ 2.347092] usb usb1: bus auto-suspend, wakeup 1
Nov 8 18:33:56 arm kernel: [ 2.374170] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.374192] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.374205] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.374256] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
Nov 8 18:33:56 arm kernel: [ 2.380430] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
Nov 8 18:33:56 arm kernel: [ 2.388373] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
Nov 8 18:33:56 arm kernel: [ 2.394794] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
Nov 8 18:33:56 arm kernel: [ 2.401883] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
Nov 8 18:33:56 arm kernel: [ 2.409333] mmc.11 supply vmmc_aux not found, using dummy regulator
Nov 8 18:33:56 arm kernel: [ 2.416018] omap_hsmmc mmc.11: pins are not configured from the driver
Nov 8 18:33:56 arm kernel: [ 2.450603] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
Nov 8 18:33:56 arm kernel: [ 2.462315] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
Nov 8 18:33:56 arm kernel: [ 2.469625] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Nov 8 18:33:56 arm kernel: [ 2.478619] usb usb1: usb wakeup-resume
Nov 8 18:33:56 arm kernel: [ 2.478664] usb usb1: usb auto-resume
Nov 8 18:33:56 arm kernel: [ 2.478690] hub 1-0:1.0: hub_resume
Nov 8 18:33:56 arm kernel: [ 2.478737] hub 1-0:1.0: port 1: status 0101 change 0001
Nov 8 18:33:56 arm kernel: [ 2.478941] leds-gpio gpio-leds.8: pins are not configured from the driver
Nov 8 18:33:56 arm kernel: [ 2.486206] of_get_named_gpio_flags exited with status 53
Nov 8 18:33:56 arm kernel: [ 2.486227] of_get_named_gpio_flags exited with status 54
Nov 8 18:33:56 arm kernel: [ 2.486244] of_get_named_gpio_flags exited with status 55
Nov 8 18:33:56 arm kernel: [ 2.486261] of_get_named_gpio_flags exited with status 56
Nov 8 18:33:56 arm kernel: [ 2.486381] of_get_named_gpio_flags exited with status 53
Nov 8 18:33:56 arm kernel: [ 2.486624] of_get_named_gpio_flags exited with status 54
Nov 8 18:33:56 arm kernel: [ 2.486808] of_get_named_gpio_flags exited with status 55
Nov 8 18:33:56 arm kernel: [ 2.486963] of_get_named_gpio_flags exited with status 56
Nov 8 18:33:56 arm kernel: [ 2.487542] ledtrig-cpu: registered to indicate activity on CPUs
Nov 8 18:33:56 arm kernel: [ 2.494320] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
Nov 8 18:33:56 arm kernel: [ 2.501560] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Nov 8 18:33:56 arm kernel: [ 2.509690] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Nov 8 18:33:56 arm kernel: [ 2.515976] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
Nov 8 18:33:56 arm kernel: [ 2.523127] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
Nov 8 18:33:56 arm kernel: [ 2.531192] usbcore: registered new interface driver usbhid
Nov 8 18:33:56 arm kernel: [ 2.537054] usbhid: USB HID core driver
Nov 8 18:33:56 arm kernel: [ 2.542332] ashmem: initialized
Nov 8 18:33:56 arm kernel: [ 2.546061] logger: created 256K log 'log_main'
Nov 8 18:33:56 arm kernel: [ 2.551138] logger: created 256K log 'log_events'
Nov 8 18:33:56 arm kernel: [ 2.556383] logger: created 256K log 'log_radio'
Nov 8 18:33:56 arm kernel: [ 2.561586] logger: created 256K log 'log_system'
Nov 8 18:33:56 arm kernel: [ 2.569019] of_get_named_gpio_flags exited with status 59
Nov 8 18:33:56 arm kernel: [ 2.570257] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
Nov 8 18:33:56 arm kernel: [ 2.581267] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Nov 8 18:33:56 arm kernel: [ 2.581342] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Nov 8 18:33:56 arm kernel: [ 2.581655] TCP: cubic registered
Nov 8 18:33:56 arm kernel: [ 2.585247] NET: Registered protocol family 10
Nov 8 18:33:56 arm kernel: [ 2.591145] NET: Registered protocol family 17
Nov 8 18:33:56 arm kernel: [ 2.595884] mmc1: BKOPS_EN bit is not set
Nov 8 18:33:56 arm kernel: [ 2.600528] Key type dns_resolver registered
Nov 8 18:33:56 arm kernel: [ 2.605314] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Nov 8 18:33:56 arm kernel: [ 2.613373] ThumbEE CPU extension supported.
Nov 8 18:33:56 arm kernel: [ 2.617915] Registering SWP/SWPB emulation handler
Nov 8 18:33:56 arm kernel: [ 2.624037] registered taskstats version 1
Nov 8 18:33:56 arm kernel: [ 2.629233] mmc1: new high speed MMC card at address 0001
Nov 8 18:33:56 arm kernel: [ 2.636642] of_get_named_gpio_flags: can't parse gpios property
Nov 8 18:33:56 arm kernel: [ 2.636672] tilcdc 4830e000.fb: No power control GPIO
Nov 8 18:33:56 arm kernel: [ 2.642594] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
Nov 8 18:33:56 arm kernel: [ 2.647976] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
Nov 8 18:33:56 arm kernel: [ 2.663204] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
Nov 8 18:33:56 arm kernel: [ 2.673064] mmcblk0: p1 p2
Nov 8 18:33:56 arm kernel: [ 2.678539] mmcblk0boot1: unknown partition table
Nov 8 18:33:56 arm kernel: [ 2.685454] mmcblk0boot0: unknown partition table
Nov 8 18:33:56 arm kernel: [ 2.690584] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Nov 8 18:33:56 arm kernel: [ 2.778923] tilcdc 4830e000.fb: found TDA19988
Nov 8 18:33:56 arm kernel: [ 2.784317] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Nov 8 18:33:56 arm kernel: [ 2.791252] [drm] No driver support for vblank timestamp query.
Nov 8 18:33:56 arm kernel: [ 2.797863] tilcdc 4830e000.fb: No connectors reported connected with modes
Nov 8 18:33:56 arm kernel: [ 2.805257] [drm] Cannot find any crtc or sizes - going 1024x768
Nov 8 18:33:56 arm kernel: [ 2.825784] Console: switching to colour frame buffer device 128x48
Nov 8 18:33:56 arm kernel: [ 2.841878] tilcdc 4830e000.fb: fb0: frame buffer device
Nov 8 18:33:56 arm kernel: [ 2.847540] tilcdc 4830e000.fb: registered panic notifier
Nov 8 18:33:56 arm kernel: [ 2.853303] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
Nov 8 18:33:56 arm kernel: [ 2.875317] usb 1-1: default language 0x0409
Nov 8 18:33:56 arm kernel: [ 2.875626] usb 1-1: udev 2, busnum 1, minor = 1
Nov 8 18:33:56 arm kernel: [ 2.875651] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Nov 8 18:33:56 arm kernel: [ 2.882696] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Nov 8 18:33:56 arm kernel: [ 2.890172] usb 1-1: Product: USB2.0 Hub
Nov 8 18:33:56 arm kernel: [ 2.894813] usb 1-1: usb_probe_device
Nov 8 18:33:56 arm kernel: [ 2.894840] usb 1-1: configuration #1 chosen from 1 choice
Nov 8 18:33:56 arm kernel: [ 2.895178] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Nov 8 18:33:56 arm kernel: [ 2.895358] hub 1-1:1.0: usb_probe_interface
Nov 8 18:33:56 arm kernel: [ 2.895379] hub 1-1:1.0: usb_probe_interface - got id
Nov 8 18:33:56 arm kernel: [ 2.895449] hub 1-1:1.0: USB hub found
Nov 8 18:33:56 arm kernel: [ 2.899689] hub 1-1:1.0: 4 ports detected
Nov 8 18:33:56 arm kernel: [ 2.903908] hub 1-1:1.0: standalone hub
Nov 8 18:33:56 arm kernel: [ 2.903925] hub 1-1:1.0: ganged power switching
Nov 8 18:33:56 arm kernel: [ 2.903941] hub 1-1:1.0: global over-current protection
Nov 8 18:33:56 arm kernel: [ 2.903956] hub 1-1:1.0: Single TT
Nov 8 18:33:56 arm kernel: [ 2.903975] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Nov 8 18:33:56 arm kernel: [ 2.903990] hub 1-1:1.0: Port indicators are supported
Nov 8 18:33:56 arm kernel: [ 2.904006] hub 1-1:1.0: power on to power good time: 100ms
Nov 8 18:33:56 arm kernel: [ 2.904374] hub 1-1:1.0: local power source is good
Nov 8 18:33:56 arm kernel: [ 2.904394] hub 1-1:1.0: no over-current condition exists
Nov 8 18:33:56 arm kernel: [ 2.904673] hub 1-1:1.0: enabling power on all ports
Nov 8 18:33:56 arm kernel: [ 2.906067] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Nov 8 18:33:56 arm kernel: [ 2.906116] hub 1-0:1.0: port 1 enable change, status 00000503
Nov 8 18:33:56 arm kernel: [ 2.909126] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
Nov 8 18:33:56 arm kernel: [ 2.915523] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
Nov 8 18:33:56 arm kernel: [ 2.931275] libphy: 4a101000.mdio: probed
Nov 8 18:33:56 arm kernel: [ 2.935559] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Nov 8 18:33:56 arm kernel: [ 2.945363] Detected MACID = 90:59:af:55:5c:07
Nov 8 18:33:56 arm kernel: [ 2.949995] cpsw 4a100000.ethernet: NAPI disabled
Nov 8 18:33:56 arm kernel: [ 2.956772] omap_rtc 44e3e000.rtc: setting system clock to 2013-11-08 18:33:45 UTC (1383935625)
Nov 8 18:33:56 arm kernel: [ 2.971650] ALSA device list:
Nov 8 18:33:56 arm kernel: [ 2.974791] #0: TI BeagleBone Black
Nov 8 18:33:56 arm kernel: [ 2.979337] Freeing init memory: 268K
Nov 8 18:33:56 arm kernel: [ 3.007593] hub 1-1:1.0: port 3: status 0101 change 0001
Nov 8 18:33:56 arm kernel: [ 3.108468] hub 1-1:1.0: state 7 ports 4 chg 0008 evt 0000
Nov 8 18:33:56 arm kernel: [ 3.108779] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
Nov 8 18:33:56 arm kernel: [ 3.175081] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc
Nov 8 18:33:56 arm kernel: [ 3.269515] usb 1-1.3: default language 0x0409
Nov 8 18:33:56 arm kernel: [ 3.269823] usb 1-1.3: udev 3, busnum 1, minor = 2
Nov 8 18:33:56 arm kernel: [ 3.269840] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
Nov 8 18:33:56 arm kernel: [ 3.277082] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Nov 8 18:33:56 arm kernel: [ 3.284742] usb 1-1.3: Product: USB2.0 Hub
Nov 8 18:33:56 arm kernel: [ 3.307961] usb 1-1.3: usb_probe_device
Nov 8 18:33:56 arm kernel: [ 3.307990] usb 1-1.3: configuration #1 chosen from 1 choice
Nov 8 18:33:56 arm kernel: [ 3.308314] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Nov 8 18:33:56 arm kernel: [ 3.308450] hub 1-1.3:1.0: usb_probe_interface
Nov 8 18:33:56 arm kernel: [ 3.308463] hub 1-1.3:1.0: usb_probe_interface - got id
Nov 8 18:33:56 arm kernel: [ 3.308487] hub 1-1.3:1.0: USB hub found
Nov 8 18:33:56 arm kernel: [ 3.317430] hub 1-1.3:1.0: 4 ports detected
Nov 8 18:33:56 arm kernel: [ 3.325193] hub 1-1.3:1.0: standalone hub
Nov 8 18:33:56 arm kernel: [ 3.325215] hub 1-1.3:1.0: ganged power switching
Nov 8 18:33:56 arm kernel: [ 3.325225] hub 1-1.3:1.0: global over-current protection
Nov 8 18:33:56 arm kernel: [ 3.325234] hub 1-1.3:1.0: Single TT
Nov 8 18:33:56 arm kernel: [ 3.325246] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
Nov 8 18:33:56 arm kernel: [ 3.325256] hub 1-1.3:1.0: Port indicators are supported
Nov 8 18:33:56 arm kernel: [ 3.325265] hub 1-1.3:1.0: power on to power good time: 100ms
Nov 8 18:33:56 arm kernel: [ 3.327171] hub 1-1.3:1.0: local power source is good
Nov 8 18:33:56 arm kernel: [ 3.327190] hub 1-1.3:1.0: no over-current condition exists
Nov 8 18:33:56 arm kernel: [ 3.327406] hub 1-1.3:1.0: enabling power on all ports
Nov 8 18:33:56 arm kernel: [ 3.429907] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0000
Nov 8 18:33:56 arm kernel: [ 3.431016] hub 1-1.3:1.0: hub_suspend
Nov 8 18:33:56 arm kernel: [ 3.431538] usb 1-1.3: usb auto-suspend, wakeup 1
Nov 8 18:33:56 arm kernel: [ 3.445379] hub 1-1:1.0: hub_suspend
Nov 8 18:33:56 arm kernel: [ 3.447927] usb 1-1: usb auto-suspend, wakeup 1
Nov 8 18:33:56 arm kernel: [ 3.459978] hub 1-0:1.0: hub_suspend
Nov 8 18:33:56 arm kernel: [ 3.460023] usb usb1: bus auto-suspend, wakeup 1
Nov 8 18:33:56 arm kernel: [ 4.216139] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Nov 8 18:33:56 arm kernel: [ 7.482869] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Nov 8 18:33:56 arm kernel: [ 7.788296] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Nov 8 18:33:56 arm kernel: [ 12.198895] net eth0: initializing cpsw version 1.12 (0)
Nov 8 18:33:56 arm kernel: [ 12.206599] net eth0: phy found : id is : 0x7c0f1
Nov 8 18:33:56 arm kernel: [ 12.211545] libphy: PHY 4a101000.mdio:01 not found
Nov 8 18:33:56 arm kernel: [ 12.216569] net eth0: phy 4a101000.mdio:01 not found on slave 1
Nov 8 18:33:56 arm kernel: [ 12.228920] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 8 18:33:56 arm kernel: [ 13.823005] gadget: using random self ethernet address
Nov 8 18:33:56 arm kernel: [ 13.843956] usb0: MAC 42:b2:c2:14:8c:a0
Nov 8 18:33:56 arm kernel: [ 13.848060] usb0: HOST MAC 90:59:af:55:5c:09
Nov 8 18:33:56 arm kernel: [ 13.874663] gadget: Mass Storage Function, version: 2009/09/11
Nov 8 18:33:56 arm kernel: [ 13.880948] gadget: Number of LUNs=1
Nov 8 18:33:56 arm kernel: [ 13.895530] lun0: LUN: removable file: /dev/mmcblk0p1
Nov 8 18:33:56 arm kernel: [ 13.917002] gadget: Multifunction Composite Gadget
Nov 8 18:33:56 arm kernel: [ 13.937579] gadget: g_multi ready
Nov 8 18:33:56 arm kernel: [ 13.950614] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
Nov 8 18:33:56 arm kernel: [ 13.971785] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
Nov 8 18:33:56 arm kernel: [ 13.987886] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
Nov 8 18:33:56 arm kernel: [ 13.987985] usb usb2: default language 0x0409
Nov 8 18:33:56 arm kernel: [ 13.988018] usb usb2: udev 1, busnum 2, minor = 128
Nov 8 18:33:56 arm kernel: [ 13.988031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Nov 8 18:33:56 arm kernel: [ 13.995212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 8 18:33:56 arm kernel: [ 14.002803] usb usb2: Product: MUSB HDRC host driver
Nov 8 18:33:56 arm kernel: [ 14.008041] usb usb2: Manufacturer: Linux 3.8.13-bone28 musb-hcd
Nov 8 18:33:56 arm kernel: [ 14.014349] usb usb2: SerialNumber: musb-hdrc.0.auto
Nov 8 18:33:56 arm kernel: [ 14.030330] usb usb2: usb_probe_device
Nov 8 18:33:56 arm kernel: [ 14.030357] usb usb2: configuration #1 chosen from 1 choice
Nov 8 18:33:56 arm kernel: [ 14.030426] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Nov 8 18:33:56 arm kernel: [ 14.030599] hub 2-0:1.0: usb_probe_interface
Nov 8 18:33:56 arm kernel: [ 14.030612] hub 2-0:1.0: usb_probe_interface - got id
Nov 8 18:33:56 arm kernel: [ 14.030634] hub 2-0:1.0: USB hub found
Nov 8 18:33:56 arm kernel: [ 14.045739] hub 2-0:1.0: 1 port detected
Nov 8 18:33:56 arm kernel: [ 14.053958] hub 2-0:1.0: standalone hub
Nov 8 18:33:56 arm kernel: [ 14.053979] hub 2-0:1.0: individual port power switching
Nov 8 18:33:56 arm kernel: [ 14.053988] hub 2-0:1.0: no over-current protection
Nov 8 18:33:56 arm kernel: [ 14.053998] hub 2-0:1.0: Single TT
Nov 8 18:33:56 arm kernel: [ 14.054009] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
Nov 8 18:33:56 arm kernel: [ 14.054019] hub 2-0:1.0: power on to power good time: 10ms
Nov 8 18:33:56 arm kernel: [ 14.054081] hub 2-0:1.0: local power source is good
Nov 8 18:33:56 arm kernel: [ 14.054188] hub 2-0:1.0: enabling power on all ports
Nov 8 18:33:56 arm kernel: [ 14.155303] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
Nov 8 18:33:56 arm kernel: [ 14.155364] hub 2-0:1.0: hub_suspend
Nov 8 18:33:56 arm kernel: [ 14.155395] usb usb2: bus auto-suspend, wakeup 1
Nov 8 18:33:57 arm /usr/sbin/cron[1855]: (CRON) INFO (pidfile fd = 3)
Nov 8 18:33:57 arm /usr/sbin/cron[1860]: (CRON) STARTUP (fork ok)
Nov 8 18:33:57 arm /usr/sbin/cron[1860]: (CRON) INFO (Running @reboot jobs)
Nov 8 18:33:57 arm kernel: [ 15.282697] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Nov 8 18:33:57 arm kernel: [ 15.289452] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 8 18:33:57 arm udhcpd[1952]: udhcpd (v1.20.2) started
Nov 8 18:33:57 arm udhcpd[1952]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Nov 8 18:33:57 arm udhcpd[1952]: is interface usb0 up and configured?: Cannot assign requested address
Nov 8 18:33:58 arm udhcpd[1994]: udhcpd (v1.20.2) started
Nov 8 18:33:58 arm udhcpd[1994]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Nov 8 18:33:58 arm udhcpd[1994]: is interface usb0 up and configured?: Cannot assign requested address
Nov 8 18:33:58 arm kernel: [ 16.203754] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Nov 8 18:33:58 arm udhcpd[1997]: udhcpd (v1.20.2) started
Nov 8 18:33:58 arm udhcpd[1997]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Nov 8 18:34:08 arm ntpdate[1517]: step time server 87.139.126.233 offset -0.703104 sec
Nov 8 18:34:18 arm ntpdate[2005]: adjust time server 87.139.126.233 offset 0.000392 sec
Nov 8 18:44:41 arm rpc.statd[9348]: Version 1.2.6 starting
Nov 8 18:44:41 arm sm-notify[9349]: Version 1.2.6 starting
Nov 8 18:44:41 arm rpc.statd[9348]: Failed to read /var/lib/nfs/state: Success
Nov 8 18:44:41 arm rpc.statd[9348]: Initializing NSM state
Nov 8 18:44:41 arm kernel: [ 659.791253] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 8 18:47:07 arm /usr/sbin/cron[13428]: (CRON) INFO (pidfile fd = 3)
Nov 8 18:47:07 arm /usr/sbin/cron[13429]: (CRON) STARTUP (fork ok)
Nov 8 18:47:07 arm /usr/sbin/cron[13429]: (CRON) INFO (Skipping @reboot jobs -- not system startup)
Nov 8 18:47:10 arm kernel: imklog 5.8.11, log source = /proc/kmsg started.
Nov 8 18:47:10 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="13563" x-info="http://www.rsyslog.com"] start
Nov 8 18:48:01 arm /USR/SBIN/CRON[13744]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Nov 8 18:48:01 arm /USR/SBIN/CRON[13745]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Nov 8 18:49:02 arm /USR/SBIN/CRON[13806]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))

tweety7472 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

@karolek

Was du noch probieren könntest
Da du ja jetzt 2 Hubs da hast wenn ich das richtig verstanden habe ( aktive oder passive ? )

1 Hub an Bone + 2 Easymouse
2 Hub an 1 Hub und dann die anderen beiden Easymouse an Hub 2

karolek2 · 16. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Hallo!

Habe aktive Hubs,glaube mal so was probiert zu haben,aber werde noch mal versuchen.
Habe auch probiert ein Reader an MiniUsb anzuschliessen,wurde aber nicht erkannt,wäre das vielleicht eine Möglichkeit?

Gruss

tweety7472 · 17. November 2013

AW: Raspbery Pi oder Beaglebone Black?

Mit dem Mini weiß ich jetzt nicht muss mal testen wenn ich die Easymäuse da habe solange kann ich immer nur vermuten

was man noch versuchen könnte wäre

den 3.12 kernel zu kompilieren laut beagleboard sind die USB treibe dort überarbeitet

Suche

Suche

Raspbery Pi oder Beaglebone Black?

joerg_999

Stamm User

tweety7472

Ist oft hier

joerg_999

Stamm User

tweety7472

Ist oft hier

joerg_999

Stamm User

karolek2

Freak

joerg_999

Stamm User

tweety7472

Ist oft hier

joerg_999

Stamm User

karolek2

Freak

tweety7472

Ist oft hier

karolek2

Freak

tweety7472

Ist oft hier

karolek2

Freak

tweety7472

Ist oft hier

Ähnliche Themen

Spenden Unterstützung