Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Raspberry Pi3 mit HD02 und Easymouse

    Nobody is reading this thread right now.
Die Mouse könnte einen Weg haben.
Mal mit anderem Takt testen.
 
Hier mal meine configs die laufen...

[global]
logfile = /var/log/oscam.log
disableuserfile = 0
usrfileflag = 1
nice = -1
maxlogsize = 5000
preferlocalcards = 2
usrfile = /var/etc/user.log
emmlogdir = /var/etc/
failbantime = 240
failbancount = 5

[cache]
delay = 20

[cs378x]
port = 47122

[serial]
device = xxx

[cccam]
port = 47111
serverip = 192.168.xx.xxx
nodeid = xxxxxxxxxxxxxxxxxxxxx
version = 2.3.0
reshare = 1

#[dvbapi]

[webif]
httpport = 4444
httpuser = pass
httppwd = pass
httppollrefresh = 20
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpallowed = 127.0.0.1,1.0.0.1-255.255.255.255
http_status_log = 1

[reader]
label = hdplus
protocol = mouse
device = /dev/hdplus
caid = 1843
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 600
group = 2
emmcache = 1,1,2,0
saveemm-unknown = 1
saveemm-u = 1

oscam Version 11392
 
Der Raspberry wird es nicht sein wenn er durchgehend läuft. Wenn bei der mouse und beim smargo das Problem hast und die Karte intern läuft kann es nur noch deinen configs liegen...

Und hast du jetzt endlich mal mit 357 mhz getestet. Wichtig: Karte raus, mouse einstellen, an den Raspberry, Karte rein, Reader erst dann im oscam starten!
 
Zuletzt bearbeitet:
@Safran, hier der Log nach der umstellung auf 357 mhz.

  • HD2 [mouse] creating thread for device /dev/hdplus
  • 2018/03/09 21:59:48 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2018/03/09 21:59:48 00000000 s (main) waiting for local card init
  • 2018/03/09 21:59:48 09352553 h (webif) webif: decompressed 202455 bytes back into 433236 bytes
  • 2018/03/09 21:59:48 09352553 h (webif) HTTP Server running. ip=0.0.0.0 port=83
  • 2018/03/09 21:59:48 0CA64D99 r (reader) HD2 [mouse] Buffers readed 0 bytes total time_us 75137
  • 2018/03/09 21:59:48 0CA64D99 r (reader) HD2 [mouse] Flush readed byte Nr 1 value 03 time_us 6424
  • 2018/03/09 21:59:49 0CA64D99 r (reader) HD2 [mouse] Buffers readed 1 bytes total time_us 81746
  • 2018/03/09 21:59:49 0CA64D99 r (reader) HD2 [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=357, cardmhz=357)
  • 2018/03/09 21:59:49 0CA64D99 r (reader) HD2 [mouse] card detected
  • 2018/03/09 21:59:49 0CA64D99 r (reader) HD2 [mouse] Buffers readed 0 bytes total time_us 75121
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] Setting baudrate to 111600 bps
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] Buffers readed 0 bytes total time_us 75121
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 21:59:51 0CA64D99 r (reader) HD2 [mouse] Card responded ok for ifsd request of 160
  • 2018/03/09 21:59:52 0CA64D99 r (reader) HD2 [mouse] detect native nagra card
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [mouse] ready for requests
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [mouse] found card system nagra
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] ROM: D N A S P 1 8 0
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] REV: M e r 0 0 0
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] SER: ############
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] CAID: 1843
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] Prv.ID: 00 00 34 11 (sysid)
  • 2018/03/09 21:59:53 0CA64D99 r (reader) HD2 [nagra] Prv.ID: 00 00 00 00
  • 2018/03/09 21:59:55 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 21:59:57 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 21:59:57 0CA64D99 r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 12171
  • 2018/03/09 21:59:57 0CA64D99 r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 87338
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] Setting baudrate to 111600 bps
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75114
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 21:59:58 0CA64D99 r (reader) HD2 [nagra] Card responded ok for ifsd request of 160
  • 2018/03/09 21:59:59 00000000 s (main) init for all local cards done
  • 2018/03/09 21:59:59 00000000 s (emmcache) loaded 180 emmcache records from /var/etc/oscam.emmcache in 5 ms
  • 2018/03/09 21:59:59 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms
  • 2018/03/09 21:59:59 00000000 s (anticasc) anti cascading disabled
  • 2018/03/09 21:59:59 409715A7 c (client) anonymous disconnected from 192.168.
  • 2018/03/09 22:00:00 28E3C1E9 c (-) -- Skipped 1 duplicated log lines --
  • 2018/03/09 22:00:00 28E3C1E9 c (client) 192.168.: resolved ip=192.168.
  • 2018/03/09 22:00:00 28E3C1E9 c (client) encrypted cccam-client 192.168. granted (xx, au=auto (3 reader))
  • 2018/03/09 22:00:03 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:05 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:05 0CA64D99 r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 12038
  • 2018/03/09 22:00:05 0CA64D99 r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 87276
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] Setting baudrate to 111600 bps
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75122
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 22:00:06 0CA64D99 r (reader) HD2 [nagra] Card responded ok for ifsd request of 160
  • 2018/03/09 22:00:06 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:1E847D13B509EC0034FD6FC3510E05BE): not found (4855 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:07 0CA64D99 r (reader) HD2 [nagra] WZ emmtype=global, len=139 (hex: 0x8B), cnt=1: written (580 ms)
  • 2018/03/09 22:00:10 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:11 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:11 0CA64D99 r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 12047
  • 2018/03/09 22:00:11 0CA64D99 r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 87288
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] Setting baudrate to 111600 bps
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75124
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 22:00:13 0CA64D99 r (reader) HD2 [nagra] Card responded ok for ifsd request of 160
  • 2018/03/09 22:00:14 0CA64D99 r (reader) HD2 [nagra] WZ emmtype=global, len=139 (hex: 0x8B), cnt=1: written (878 ms)
  • 2018/03/09 22:00:19 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:20 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:21 0CA64D99 r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 10788
  • 2018/03/09 22:00:21 0CA64D99 r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 86032
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] Setting baudrate to 111600 bps
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75124
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 22:00:22 0CA64D99 r (reader) HD2 [nagra] Card responded ok for ifsd request of 160
  • 2018/03/09 22:00:22 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:9CEAEC7D53E22E8824CDC542117A0085): not found (4850 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:24 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:25 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:25 0CA64D99 r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 10917
  • 2018/03/09 22:00:26 0CA64D99 r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 86092
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] Setting baudrate to 111600 bps
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75125
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 22:00:27 0CA64D99 r (reader) HD2 [nagra] Card responded ok for ifsd request of 160
  • 2018/03/09 22:00:35 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:37 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:37 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75125
  • 2018/03/09 22:00:38 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75121
  • 2018/03/09 22:00:38 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:33AC07D2B0CF4F18B0DEA0CFADB80DCA): timeout (5001 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:39 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75117
  • 2018/03/09 22:00:42 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:42 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:85C67C59C2E2FA39998B93E2CB14C389): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:44 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:44 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75120
  • 2018/03/09 22:00:45 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75117
  • 2018/03/09 22:00:46 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75121
  • 2018/03/09 22:00:48 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:85C67C59C2E2FA39998B93E2CB14C389): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:49 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:50 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:50 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75123
  • 2018/03/09 22:00:52 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75122
  • 2018/03/09 22:00:52 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:8F3FB0A5E149502C4BDE5CA988F113C9): timeout (5001 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:53 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75125
  • 2018/03/09 22:00:55 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:00:57 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:00:57 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75136
  • 2018/03/09 22:00:58 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:8F3FB0A5E149502C4BDE5CA988F113C9): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:00:58 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75118
  • 2018/03/09 22:00:59 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75116
  • 2018/03/09 22:01:02 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:20EF60387A21E061971FC3E120F0FCFB): timeout (5001 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:01:02 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:01:04 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:01:04 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75117
  • 2018/03/09 22:01:05 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75116
  • 2018/03/09 22:01:06 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75137
  • 2018/03/09 22:01:08 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:20EF60387A21E061971FC3E120F0FCFB): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:01:09 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:01:11 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:01:11 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75134
  • 2018/03/09 22:01:12 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:63007CE2E33B4D93783859061F46FB84): timeout (5001 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:01:12 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75119
  • 2018/03/09 22:01:13 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75129
  • 2018/03/09 22:01:16 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:01:18 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:01:18 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:63007CE2E33B4D93783859061F46FB84): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:01:18 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75129
  • 2018/03/09 22:01:19 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75121
  • 2018/03/09 22:01:20 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75144
  • 2018/03/09 22:01:22 28E3C1E9 c (ecm) WZ (1843@000000/0000/2EAF/89:6062DCC38C2DF8EC78C9D7C955676AA9): timeout (5000 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:01:23 0CA64D99 r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:01:24 0CA64D99 r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:01:25 0CA64D99 r (reader) HD2 [nagra] Buffers readed 0 bytes total time_us 75118
  • 2018/03/09 22:01:27 0CA64D99 r (-) -- Skipped 1 duplicated log lines --
  • 2018/03/09 22:01:28 28E3C1E9 c (-) -- Skipped 1 duplicated log lines --
 
Nimm mal ein anderes Netzteil. Hatte mal das Problem, das mein Odroid lief aber kein Bild ausgab. Vermutete schon einen HW-Defekt, bis ich dann ein anderes Netzteil nahm (gleiche Werte) und es ging wieder.

MfG
 
Hab ich schon geschrieben, alles schon mehrfach versucht, bringt leider nichts.
 
Zuletzt bearbeitet von einem Moderator:
Dann bin ich ratlos. Bleibt noch ein Test mit PCSC (omikey 3121). Kann ja dann nur noch en eine Hardwarekomponennte liegen.

MfG
 
Hier noch einmal meine Configs

[reader]
label = HD2
protocol = mouse
device = /dev/hdplus
caid = 1843
boxkey = xxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 357
group = 1
emmcache = 1,1,2,0

[global]
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
emmlogdir = /var/log/ipc/

[cccam]
port = xxxxxx
nodeid = 6332B716104A13F0
version = 2.0.11
reshare = 2
forward_origin_card = 1

[webif]
httpport = xx
httpuser = xxxx
httppwd = xxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
hideclient_to = 15
 
Na so stand sie drin, ich hab die Zahlen gelöscht, nach einem Neustart wird aber keine neue erstellt.
Nach dem ich jetzt auf 357mhz umgestellt habe liest er zwar die Karte aber genau einmal normal und dann immer mit Timeout 5000ms.

  • 2018/03/09 22:32:22 6078507A r (reader) HD2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/03/09 22:32:22 6078507A r (reader) HD2 [mouse] Card responded ok for ifsd request of 160
  • 2018/03/09 22:32:23 6078507A r (reader) HD2 [mouse] detect native nagra card
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [mouse] ready for requests
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [mouse] found card system nagra
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] ROM: D N A S P 1 8 0
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] REV: M e r 0 0 0
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] SER: ############
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] CAID: 1843
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] Prv.ID: 00 00 34 11 (sysid)
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] Prv.ID: 00 00 00 00
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] IRD ID: ############
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] active to: 2018/05/10 02:40
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] -----------------------------------------
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] |id |tier |valid from |valid to |
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] +----+--------+------------+------------+
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] |8011|0066 |2012/02/18 |2013/02/18 |
  • 2018/03/09 22:32:24 6078507A r (reader) HD2 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
  • 2018/03/09 22:32:25 6078507A r (reader) HD2 [nagra] |8011|0BB8 |2017/11/23 |2018/04/28 |
  • 2018/03/09 22:32:25 6078507A r (reader) HD2 [nagra] -----------------------------------------
  • 2018/03/09 22:32:25 00000000 s (main) init for all local cards done
  • 2018/03/09 22:32:25 00000000 s (emmcache) loaded 176 emmcache records from /var/etc/oscam.emmcache in 14 ms
  • 2018/03/09 22:32:25 00000000 s (emmcache) loaded 28 emmstat records from /var/etc/oscam.emmstat in 1 ms
  • 2018/03/09 22:32:25 00000000 s (anticasc) anti cascading disabled
  • 2018/03/09 22:32:30 45C092CD c (client) 192.168.: resolved ip=192.168.
  • 2018/03/09 22:32:30 45C092CD c (client) encrypted cccam-client 192.168. granted (xx, au=auto (3 reader))
  • 2018/03/09 22:32:31 45C092CD c (ecm) WZ (1843@000000/0000/2EAF/89:63A371E8BDAD13FE25ADF8445190A8D7): found (387 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:32:39 6078507A r (reader) HD2 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2018/03/09 22:32:48 45C092CD c (ecm) WZ (1843@000000/0000/2EAF/89:DCBE9F1981D8A1776ADC01E85547EA45): timeout (9004 ms) - RTLNITRO HD
  • 2018/03/09 22:32:49 6078507A r (reader) HD2 [nagra] T1 Resync command error, trying to reactivate!
  • 2018/03/09 22:32:49 6078507A r (reader) HD2 [nagra] Flush readed byte Nr 1 value 03 time_us 14848
  • 2018/03/09 22:32:49 6078507A r (reader) HD2 [nagra] Buffers readed 1 bytes total time_us 90087
  • 2018/03/09 22:32:49 6078507A r (reader) HD2 [nagra] ATR: 00 00
  • 2018/03/09 22:32:49 6078507A r (reader) HD2 [nagra] ERROR: Could not read reader->convention
  • 2018/03/09 22:33:08 45C092CD c (ecm) WZ (1843@000000/0000/2EAF/89:B6CC8BC69B24DC3747066CFE009AD4C1): timeout (5001 ms) by HD2 - RTLNITRO HD
  • 2018/03/09 22:33:12 45C092CD c (ecm) WZ (1843@000000/0000/2EAF/89:7EB53893FBC2B288AB06BA9BE000FF35): timeout (5000 ms) by HD2 - RTLNITRO HD
 
Zuletzt bearbeitet von einem Moderator:
Du kannst mal noch die mouse an deinem Receiver anstecken. Wenn die Karte da läuft liegt’s vielleicht doch am Raspy/ Netzteil...
 
Da müsst ich doch erst mal den reader einrichten, oder? Hab mich bisher nicht mit externen Readern an Receivern beschäftigt.
 
Zuletzt bearbeitet von einem Moderator:
Du musst Regestriert sein, um das angehängte Bild zusehen.

sorry, leider nein ... kleiner Spaß von mir ...
 

Anhänge

Du musst angemeldet sein, um die Anhangsliste zu sehen.
Zuletzt bearbeitet:
@Gatzman ich kann deinen "Spoiler" leider nicht wirklich ansehen. Kannst du mir sagen was das Problem ist?
 

Ähnliche Themen

S
Mit der 64bit Variante kam nach ca. einer Woche der Timeout Fehler.
Antworten
11
Aufrufe
333
Derek Buegel
Derek Buegel
P
gelöst Easymouse defekt? HD02 läuft in VU+ , aber nicht über Pi und Easymouse
Antworten
3
Aufrufe
1K
prozi
P
C
Raspi Reader Easymouse ansprechen
Antworten
6
Aufrufe
2K
dodo83
dodo83
J
gelöst (gelöst) Oscam - HD02 - Smargo Error settings ifsd
Antworten
4
Aufrufe
2K
jam2567
J
R
( gelöst ) Freezer bei Client
2 3 4
Antworten
45
Aufrufe
15K
renieh
R
Zurück
Oben