Problem mit Easymouse2 und Oscam

gerryhome · 9. Oktober 2015

Hallo,

jetzt habe ich so lange rumgedoktert an meinen configurations Files von Oscam und es will einfach nicht.

Also habe den Raspberry Pi 2+ nach dem Thread aufgesetzt:
https://www.digital-eliteboard.com/...eines-raspberry-pi-als-cs-server-mit-ipc.html

Alles läuft, komme ins WebIf von Oscam und habe meine configs in den ordner var/etc geschoben

Die Smartmouse 2 habe ich für meine V14 eingestellt auf 3V, Phoenix, 3,579 Mhz

Als Client habe ich eine VU Solo2 mit cccam Line. (xxxxx steht für den Port, den ich an meiner Fritzbox freigegeben habe)

Code:

c: 192.168.178.53 xxxxx user pass

Meine Oscam configs:

oscam.conf

Code:

[global]
# serverip        = 0.0.0.0
# disablelog      = 0
logfile         = /var/log/ipc/OScam.log
clientmaxidle   = 160
netprio         = 1
nice            = 1
maxlogsize      = 2000
dropdups        = 1
usrfile         = /var/log/ipc/oscamuser.log
emmlogdir       = /var/log/ipc/
pidfile = /var/run/oscam.pid

[ccam]
port            = xxxxx
version        = 2.2.1
reshare        = 0
stealth         = 1

[webif]
httpport        = 16002
httpuser        = oscam
httppwd         = oscam
httprefresh     = 10
httpallowed     = 0.0.0.0-255.255.255.255
httpreadonly    = 0
httpsavefullcfg = 1

oscam.server

Code:

[reader]
label                         = SKY_V14
protocol                      = mouse
device                        = /dev/ttyUSB0
# autospeed                     = 0
caid                          = 098C
boxid                         = 12345678
detect                        = cd
mhz                              = 357
cardmhz                       = 357
ins7e11                       = 15
ident                         = 098C:000000
group                         = 1
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2
emmcache                      = 1,1,2

oscam.user

Code:

[account]
user                          = user
pwd                           = pass
caid                          = 098C
keepalive                     = 1
au                            = 1
group                         = 1

und noch das log File

Code:

[LIST]
[*]2015/10/09 15:18:16 23BE04C2 r   (reader) SKY_V14 [mouse] PCB settings: FF FF FF FF 
[*]2015/10/09 15:18:16 23BE04C2 r   (reader) SKY_V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C 
[*]2015/10/09 15:18:16 23BE04C2 r   (reader) SKY_V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004 
[*]2015/10/09 15:18:16 23BE04C2 r   (reader) SKY_V14 [mouse] ready for requests 
[*]2015/10/09 15:18:16 23BE04C2 r   (reader) SKY_V14 [mouse] found card system videoguard2 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] card detected 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C) 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] ------------------------------------------------------------------ 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----| 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] +---------+----------+---------------------+---------------------+ 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0058 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0056 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0057 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 007b --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 007d --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0081 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 008e --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00ca --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/11/14-00:00:00 | 
[*]2015/10/09 15:18:17 23BE04C2 r   (reader) SKY_V14 [videoguard2] ------------------------------------------------------from-ins70-- 
[*]2015/10/09 15:18:17 00000000 s     (main) init for all local cards done 
[*]2015/10/09 15:18:17 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms 
[*]2015/10/09 15:18:17 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms 
[*]2015/10/09 15:18:17 00000000 s (anticasc) anti cascading disabled 
[/LIST]

Ich hoffe mir kann jemand weiterhelfen

supraracer · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Karte wird laut Log erkannt, mehr sieht man aber nicht im Log (da zu kurz).
Die Easymouse läuft jedenfalls, was ist dein Problem?

-supraracer

gerryhome · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Problem ist, das am Client nichts ankommt. Kein Bild
User steht im Oscam WebIF als offline. Ist er aber nicht.

Habe jetzt meine alte Konfiguration mit Fritzbox7141 hinter Fritzbox7490 und Smargo wieder angeklemmt und es lief sofort.

Wollte aber umstellen auf den Raspberry. Und bekomme kein Bild am Client

Hier nochmal das komplette Logfile

Code:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Fri Oct  9 16:17:18 2015
-------------------------------------------------------------------------------
2015/10/09 16:17:18 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11039 (arm-linux-gnueabihf)
2015/10/09 16:17:18 00000000 s     (main) System name    = Linux
2015/10/09 16:17:18 00000000 s     (main) Host name      = raspberrypi
2015/10/09 16:17:18 00000000 s     (main) Release        = 4.1.7+
2015/10/09 16:17:18 00000000 s     (main) Version        = #817 PREEMPT Sat Sep 19 15:25:36 BST 2015
2015/10/09 16:17:18 00000000 s     (main) Machine        = armv6l
2015/10/09 16:17:18 00000000 s     (main) creating pidfile /var/run/oscam.pid with pid 596
2015/10/09 16:17:18 00000000 s   (config) userdb reloaded: 16 accounts loaded, 0 expired, 0 disabled
2015/10/09 16:17:18 00000000 s     (main) signal handling initialized
2015/10/09 16:17:18 00000000 s   (reader) SKY_V14 [mouse] creating thread for device /dev/ttyUSB0
2015/10/09 16:17:19 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/09 16:17:19 00000000 s     (main) waiting for local card init
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  0 bytes total time_us 80036
2015/10/09 16:17:19 02CF17B8 h    (webif) webif: decompressed 163965 bytes back into 391208 bytes
2015/10/09 16:17:19 02CF17B8 h    (webif) HTTP Server running. ip=0.0.0.0 port=16002
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 1 value 03 time_us 11939
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 2 value 40 time_us 79
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 3 value 37 time_us 29658
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 4 value 5b time_us 2609
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 5 value bf time_us 1373
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 6 value f5 time_us 1236
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 7 value fe time_us 1224
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 8 value 0f time_us 1160
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 9 value 7d time_us 1222
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 10 value f2 time_us 4203
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 11 value af time_us 77
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 12 value 69 time_us 6624
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 13 value 00 time_us 74
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 14 value ad time_us 59
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 15 value f5 time_us 58
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 16 value f0 time_us 12939
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 17 value ff time_us 121
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 18 value ff time_us 229
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 19 value f5 time_us 60
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 20 value 73 time_us 57
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Flush readed byte Nr 21 value 3f time_us 57
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  21 bytes total time_us 153723
2015/10/09 16:17:19 11BD8D60 r   (reader) SKY_V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/10/09 16:17:20 11BD8D60 r   (reader) SKY_V14 [mouse] card detected
2015/10/09 16:17:20 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  0 bytes total time_us 75570
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] Setting baudrate to 38400 bps
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  0 bytes total time_us 75677
2015/10/09 16:17:21 11BD8D60 r   (reader) SKY_V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] Card type:   P1TV
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] Rom version: 20AA
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] Credit available on card: 0 euro
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] Extended 4C detected
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] found card system videoguard2
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [videoguard2] card detected
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/10/09 16:17:22 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  0 bytes total time_us 75642
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] Setting baudrate to 153600 bps
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] Buffers readed  0 bytes total time_us 75538
2015/10/09 16:17:23 11BD8D60 r   (reader) SKY_V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Card type:   P1TV
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Rom version: 20AA
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Credit available on card: 0 euro
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Extended 4C detected
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] FuseByte: 25
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Region Code: 00BO0102
2015/10/09 16:17:24 11BD8D60 r   (reader) SKY_V14 [mouse] Country Code: DEU
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] Pincode read: 7352
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] PCB settings: FF FF FF FF
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] ready for requests
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [mouse] found card system videoguard2
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] card detected
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] ------------------------------------------------------------------
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0058 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0056 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0057 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 007b --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 007d --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 0081 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 008e --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00ca --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/11/14-00:00:00 | 
2015/10/09 16:17:25 11BD8D60 r   (reader) SKY_V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/10/09 16:17:25 00000000 s     (main) init for all local cards done
2015/10/09 16:17:25 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms
2015/10/09 16:17:25 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 1 ms
2015/10/09 16:17:25 00000000 s (anticasc) anti cascading disabled

axel · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Hi,

probiere mal testweise das hier:

reshare = 0

auf "1" zu setzen. -> Oscam neustarten.

Folgenden Eintrag auch besser umändern:

version = 2.2.1

So besser: version = 2.3.0

Gruß

PS: Es empfiehlt sich, auch auf der VU Oscam herzunehmen: https://www.digital-eliteboard.com/211748-oscamonly-auf-der-box-als-client.html

gerryhome · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

habe es probiert mit reshare = 1 und version = 2.3.0

kein Erfolg

Das mit oscam auf der vu+ könnte ich natürlich machen, aber wir haben noch 2 Receiver im Haus die oscam nicht unterstützen.

4gx35 · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

im log wird kein cccamport erwähnt ? sehe ich wenigstens nicht

etwa cccam: initialized (fd=2, port=34567)

gerryhome · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Da ich nicht so fit in der Materie bin: Was heißt das?

4gx35 · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

immer alles per oscam webif machen, dort unter config - cccam (menüzeile darunter) mal deinen port neu eingeben, speichern und oscam restart

bei dir wird cccam nicht initialisiert, dann geht auch c-line nicht

gerryhome · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

SUPI, das war es. Jetzt läuft alles.

Vielen vielen Dank. Wieder was gelernt.

4gx35 · 9. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

habe noch einmal nachgesehen, dein fehler war [ccam] statt richtig [cccam] in oscam.conf
darum immer alles per oscam webif bearbeiten, wenn man sich nicht auskennt,
dann macht man erheblich weniger fehler bei den configs

karli9 · 17. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Hallo

Ich möchte mich hier zu auch gleich mal melden und zwar möchte ich meine V14 neu mit einer Easymouse (anstatt Smargo) betreiben doch ich bin mir nicht ganz sicher ob meine Einstellungen korrekt sind.

Easymouse

Code:

oben / unten / oben / oben

und der Reader

Code:

[reader]
label = SKY
protocol = smartreader
device = Serial:Reader A400fOA7
smargopatch = 1
caid = 098C
services = !SKY_HDplus,!SKY_ORF
boxid = 12345678
ins7e11 = 15
readtiers = 2
ecmwhitelist = 52,57,64,6A,7F,9B,9C,A1,91,96,97,98
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,8070950000011D,8070940000011C,8170940000011C,8170540000011D,8070540000011D
detect = cd
mhz = 357
cardmhz = 357
group = 6
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ratelimitecm = 4
ndsversion = 2
lb_weight = 300
lb_whitelist_services = SKY

Was meinen die Profis passt das so? Ist vor allem die Easymouse (Schalter) und die Werte "ins7e11", "mhz" und "cardmhz" korrekt?

Vielen Dank

Gruss

supraracer · 17. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Easymouse2 Schalter oben-unten-unten-unten

oscam.server

Code:

[reader]
label                         = SKY
protocol                      = mouse
device                        = /dev/ttyUSB0
autospeed                     = 0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
mhz                           = 358
cardmhz                       = 358
group                         = 6
emmcache                      = 1,1,2
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

Bei mehreren Readern die Easymouse am besten über udev verlinken.

-supraracer

karli9 · 17. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Super, vielen herzlichen Dank. Werde es in dem Fall mal so versuchen.

Du hast bei Dir zwar als Protokoll "mouse", kann ich den Easy Reader jedoch auch so ansprechen (Protokoll = smartreader)?

Code:

protocol = smartreader
device = Serial:Reader A400fOA7

Gruss

4gx35 · 17. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

wie der name schon sagt, eine easymouse braucht mouse und ttyUSB0,
und bei den dipschalter muss allerdings phoenix statt mouse gewählt werden
denn es ist kein smartreader/smargo

karli9 · 17. Oktober 2015

AW: Problem mit Easymouse2 und Oscam

Okay alles verstanden, dann werde ich in dem Fall mein Smartreader löschen und durch mouse ersetzen.

Vielen Dank

Suche

Suche

Problem mit Easymouse2 und Oscam

gerryhome

Ist gelegentlich hier

supraracer

DEB Inventar

gerryhome

Ist gelegentlich hier

axel

gerryhome

Ist gelegentlich hier

4gx35

gerryhome

Ist gelegentlich hier

4gx35

gerryhome

Ist gelegentlich hier

4gx35

karli9

Hacker

supraracer

DEB Inventar

karli9

Hacker

4gx35

karli9

Hacker

Ähnliche Themen

Spenden Unterstützung