Angebot Software Primo 2.4 mit TMC und TTS

[renato2]

Info:
Schon bemerkt das in der verkrüppelten [tmc] u.a. mit unterschiedlichen Protokollen gearbeitet wird.
(internal_tmc_name="gns" - internal_tmc_name="amaryllodyn")
Amaryllo-Protokoll und Locosys-Chip auf Port-1 und Baud-38400 (Standartwerte des Moduls TM07-2 von CTC)

 

[internetnihat]

Es ist werte GPS! Woher stamme der wert Port 5, Baudrate 38400! Ich sehe nicht!

Ich kann mit dem Tool nicht viel anfangen da ich nicht weis wie es funktioniert bzw auswertet.
Das habe ich in Port 5 34800 gefunden
$!¨¡5 H!¨µ,Õ$PLTTR,0,54165,32870,16704,0*5B
$PLTTM,8,6,65,64,0,0*5E
$PLTTQ,8880,39,100,1,0*53
$PLTMT,13*7F
$PLTCH,"WDR 5 "*1B
$PLTTR,0,54165,32870,16704,0*5B
$PLTTM,8,6,65,64,0,0*5E
$PLTTR,0,54165,32870,16704,0*5B
$PLTTM,8,6,65,64,0,0*5E
$PLTTQ,8880,39,100,1,0*53
$PLTMT,13*7F

Mein Tool sagt mir im anhang

 

[Pavel59]

Du muss in sys.txt>TMC ganz unten in Port statt
"1" "5" setzen, da oben es ist unwichtig!! Dann>Mehr> Einstellungen>Verkehr>
TMC Funkempfänger Einschalten> einen Hacken in der kleinen Quadrat setzen!!

 

[internetnihat]

Du muss in sys.txt>TMC ganz unten in Port statt
"1" "5" setzen, da oben es ist unwichtig!! Dann>Mehr> Einstellungen>Verkehr>
TMC Funkempfänger Einschalten> einen Hacken in der kleinen Quadrat setzen!!

TMC Funk. ist immer aktiv bei mir mit dem Start mit einem grünen Punkt

Ich habe im TMC 3 mal port 5 geändert (mit Ausrufezeichen geändert merkiert )
Entweder ich bin dumm oder ich muss da etwas anderes ändern.
Einer meinte das die China NavisRadios nur mit Royaltek ausgestattet werden,mein hat es aber mit Amaryllo eintrag funktioniert.

 

[renato2]

immer noch nicht begriffen ?

das autonavi hat kein integriertes tmc-modul als hardware.
wie geschrieben erfolgt doch der tmc-empfang über das angesteckte modul (TM07-2).
also muss das neue navigationsprogramm (sys.txt - tmc) mit den daten des modules "gefüttert" werden.

warum steht in der sys 2x tmc ?
versuche als tmc nur dies in der sys, evtl. mit port+baud etwas "spielen"
[tmc]
port="COM,5"
baud=38400
source="amaryllo"

nachtrag:
vielleicht funktioniert diese 2.4er (9.6.13.....) nicht auf einen as7609.
zur not eine andere 2.4. testen.
jede sw ist eigendlich auf bestimme navis abgesstimmt - darum gibt es ja auch unzählige versionsnummern.

 

[internetnihat]

immer noch nicht begriffen ?

das autonavi hat kein integriertes tmc-modul als hardware.

Genau ,das ist an einem Port vom Hersteller angebunden worden.
Der erste TMC Eintrag ist wie gesagt vom primo 2.0.1 ( ist von Helmut)der auch damit läuft.
Habe ich zum Zeigen beigefügt.

 

[1984chris]

Hallo
Ich habe auch ein Problem mit TMC habe ein Blaupunkt Travelpilot 53 CAM
mit IGO und TMC.
da ist diese Sys.txt

Spoiler

[device]
sdcard_name="SDMMC"

[debug]
max_memory=62914560
reserve_memory=2097152

[gps]
port=1
baud=38400
send_init=0
set_messages=0
default_latitude=50.940834
default_longitude=06.958201


[interface]
show_exit=1


[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_min = 1
backlight_max = 10
backlight_methods =20
backlight_events = 1,2
battery_critical_limits=0
battery_low_limits=0
battery_shutdown_at=0

[battery]
use_power_notifications=1

[phone]
driver="nnghal"
win_name="CarRecorder"
class_name="Explore"
exe_path="\Residentflash2\yfapp\CarRecorder\CarRecorder.exe"
show_phone_popups=false
switch_name="-h"
start_bt_at_startup = 0
default_phone_state = 0
default_bt_state = 0
show_dialer=0
msi_just_show_dialer=1

[sound]
use_os_volume=1

[scheduler]
mt_priority_juggler_enabled=1
mt_priority_juggler_low_interval=200
mt_priority_juggler_normal_interval=300

[config.baros]
camera_on_bt=1
no_da_settings=1


[modules]
ITMC_STATION_SELECTOR=TMC_STATION_SELECTOR_NULL
IFM_STATION_CACHE =DUMMY_TMC_STATION_CACHE
ISKIN=BAROS_SKIN

[tmc]
source="avanteq"
port="COM,5"
internal_tmc_name="avanteq"
update_ltn_on_country_change=1
tmc_info_database_on=1
hwrestart_on_acc=0
setup_hw_immediately_on_hw_ok=1
use_starter_thread=0
tuner_model= "AVQ_GPSTMC_TUNER"
internal_restart_timeout=15000
tmc_health_polling_timeout=1000
rds_health_polling_timeout=1000
avanteq_source_used=1
tmc_provider_name_use_old=1
tmc_provider_name=1
tmc_provider_strength=1
ignore_suspend=1
ignore_resume=1

Jetzt habe ich auch die Version Primo 2.4 aber da funktioniert TMC nicht da ist diese Sys.txt
[folders]
has_secondary_root=0

[rawdisplay]
;force_renderer="RENDER_MOYA"

[navigation]
use_duration_for_tunnel=1
stop_at_tunnel_end=1

[feature]
tunnel_guidance=0

[interface]
show_exit=1
extra_settings=1
show_tmc_config=1
show_tmc_eventlist=1
show_programs=1
mapfontscale=120
laneinfo_signpost_enabled=1
shutdown_time=0
recalc_voice=0
start_navigation_time=10
max_flag_distance_3d=3000


[power]
powermgm_state=0

[keyboard]
panel_alpha="German (QWERTRZ)"

[other]
demo_enabled=0

[debug]
skip_eula=0
experimental_features=1
show_battery_percent=1
hnr=0
show_hnr=0
no_file_cache=1
show_battery_percent=1
show_performance=0
reserve_memory="2007040" ; espaço livre do cartão em Kilobyte (Megabyte*"1024"=Kilobyte)
cache="65536" ; memória RAM do GPS em Kilobyte (262144=256Mb)(131072=128Mb)(65536=64Mb)
enable_roadshadow=1




[naviextras]
boot_service_address="

Sie müssen registriert sein, um Links zu sehen.

"

[tmc]
source="gns"
internal_tmc_name="gns"
port="/dev/com,1"
[tmc]
announce_total_route=1
auto_detour_calc=0
auto_tuning=1
check_ltn_support=1
enable_flow_events=1
flow_stripe_width=6 ;(6)
flow_stripe_offset=2 ;(0)
flow_stripe_blinking_time=1000 ;(0)
hold_station_time=60
ignore_all_events=0
ignore_sid=1
internal_tmc_name="gns"; ("gns" para Magellan; "avanteq" para Airis; "amaryllodyn" para Delco)
port="/dev/gnstmc,COM,1" ; ("COM,1" para Magellan, ou "COM,5" para Airis)
skip_loading_built_in_provider_list=1
source="gns" ; ("avanteq" para Airis; "amaryllodyn" para Delco; "gns" ou "GNSPORT" para Magellan)
test_fixedstation_time=2
test_station_time=60
tmcprovider_freeze_on_tunnel=1
tmcprovider_ignore_altfreq=1
tmcprovider_max_freeze_timeout=300
tmc_provider_name=1 ; (0, GetSysEntry)
tmcprovider_rssi_stability=4 ; (0 em alguns casos)
tmcprovider_rssi_average=3 ; (0 em alguns casos)
tmcprovider_simple_model_use=1
tmcprovider_tuner_scanlevel=1
tuneralg_8a_packet_timeout=6500
tuneralg_3a_packet_timeout=20000
tuneralg_last_8a_packet_timeout=30000
tuner_model="TMC_GPSTMC_TUNER" ; ("AVQ_GPSTMC_TUNER"para Airis)
zoom_limit=75000 ;(74752)
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_GNSPORT"
saved_config_portname="COM"
saved_config_port="1"
auto_tuning="1"
saved_last_frequency="107,5"
saved_last_tuning_mode="0"
show_all_provider_list=1
ignore_all_events="0"

[tmc-http]
start=0
enabled=0
dl_on_wifi_only=0
dl_mode=2
servers.size=1
servers[0].url="

Sie müssen registriert sein, um Links zu sehen.

"
dt_dl_0=60.0 ;Update interval in seconds jams
dl_dist_0_km=50.0 ; the radius in kilometers
source="gnse"
internal_tmc_name="gnse"
port="/dev/gnstmc,1"
priority=high

[tmc.src.http]
enabled="0"

[traffic.settings]
detour_recalc_timeout=5


[sound]
csv_voice_enabled=1
maneuver_chimes=0
ding_muted=1


[poi]
use_poi_mapping=5
use_multi_poi_mapping=0





[network]
available=0

[timezone]
patch_dst=1
sync_time=1
use_auto=1
sync_os_timezone=0
reset_os_timezone=0

[timezones]
use_timezone_setting_fix=1
use_new_timezone_ini=1
timezone_key="Time Zones"

[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=15000
3dcarsizemul=80000
3d_max_tiltlevel=9000
3d_min_zoomlevel=20
poi_distant_distance=200
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
poi_mapping=5
use_poi_mapping=5
max_poi_mapping=5
max_pois_on_horizont=5
show_pois=0
use_multi_poi_icon=0


[3d]
planned_route_contour_width=4
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
fade_around_cursor=1
max_pois_on_horizont=5
max_poi_mapping=5
poi_mapping=5
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0


[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1

[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1
hnr_ignored_missing_country_ids=*

[hnr]
ignored_missing_country_ids=*

[gps]
source="nmea"
set_messages=0
port="auto"
baud="auto"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_enabled=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,50:500,40:200,20:100"

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
;overspeed_spoken_type=1
warn_distances="0:2000"

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
;overspeed_spoken_type=1
warn_distances="0:200"

[speedcam_category:17]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
;overspeed_spoken_type=1
warn_distances="0:100"

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:22]
activated_spoken_type=speech
activated_speech="Caution dangerous road ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"

[speedcam_category:24]
activated_spoken_type=speech
activated_speech="Caution dangerous area"
;overspeed_spoken_type=1
warn_distances="0:800"

[speedcam_category:25]
activated_spoken_type=speech
activated_speech="Caution black spot"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:26]
activated_spoken_type=speech
activated_speech="Caution closed road"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:27]
activated_spoken_type=speech
activated_speech="Caution congestion ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:28]
activated_spoken_type=speech
activated_speech="Caution constriction ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:29]
activated_spoken_type=speech
activated_speech="Caution low visibility ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:30]
activated_spoken_type=speech
activated_speech="Caution low bridge ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
;overspeed_spoken_type=1
warn_distances="0:500"


[camera1]
maxdistance=500
minzoom2d=50
maxzoom2d=200
defaultzoom2d=300
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=45
defaultangle=80
angleoffset=65
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[camera11]
maxdistance=500
minzoom2d=50
maxzoom2d=300
defaultzoom2d=400
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=50
defaultangle=80
angleoffset=43
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[vr]
disabled=0

kann mir jemand weiterhelfen bitte?

 

[renato2]

nur mal so nebenbei:
das blaupunkt travelpilot 53 hat laut gerätehersteller das protokoll: "avanteq" - siehe auch alte sys.

wieso steht in der neuen sys/tmc: "gns"

(in der regel steht auch in den angeboten: sys.txt anpassen)

warum wurden die sys nicht in einen spoiler gepackt?

 

[1984chris]

deswegen wollte ich ja fragen was ich einstellen muss.

 

[Pavel59]

@1984chris
Der TMC antrag oben kann löschen, aber er hat keinen Wirkung auf TMC. Muss anpassen "PORT",
"source" und "internal_tmc_name"!!

@internetnihat

Der TMC antrag oben kann löschen, aber er hat keinen Wirkung auf TMC. Muss anpassen "PORT",
"source" und "internal_tmc_name"!!

 

[1984chris]

Ich habe jetzt in de Sys.txt das eingetragen

Spoiler

[tmc]
source="avanteq"
port="/dev/com,5"
internal_tmc_name="avanteq"

es geht nicht, wenn ich auf einstellungen gehe steht keine TMC hardware gefunden

 

[Pavel59]

Es kann so nicht funktionieren, muss es eingetragen in original sys>TMC und lesen richtige was schreibe ich!! Deine TMC date ist für nichts!!

 

[1984chris]

so habe das mit !!!!!! geändert

Spoiler

[tmc]
source="avanteq" !!!!!!!!!!!!
internal_tmc_name="avanteq" !!!!!!!!!
port="/dev/com,5" !!!!!!!!!!1
[tmc]
announce_total_route=1
auto_detour_calc=0
auto_tuning=1
check_ltn_support=1
enable_flow_events=1
flow_stripe_width=6 ;(6)
flow_stripe_offset=2 ;(0)
flow_stripe_blinking_time=1000 ;(0)
hold_station_time=60
ignore_all_events=0
ignore_sid=1
internal_tmc_name="gns"; ("gns" para Magellan; "avanteq" para Airis; "amaryllodyn" para Delco)
port="/dev/gnstmc,COM,1" ; ("COM,1" para Magellan, ou "COM,5" para Airis)
skip_loading_built_in_provider_list=1
source="gns" ; ("avanteq" para Airis; "amaryllodyn" para Delco; "gns" ou "GNSPORT" para Magellan)
test_fixedstation_time=2
test_station_time=60
tmcprovider_freeze_on_tunnel=1
tmcprovider_ignore_altfreq=1
tmcprovider_max_freeze_timeout=300
tmc_provider_name=1 ; (0, GetSysEntry)
tmcprovider_rssi_stability=4 ; (0 em alguns casos)
tmcprovider_rssi_average=3 ; (0 em alguns casos)
tmcprovider_simple_model_use=1
tmcprovider_tuner_scanlevel=1
tuneralg_8a_packet_timeout=6500
tuneralg_3a_packet_timeout=20000
tuneralg_last_8a_packet_timeout=30000
tuner_model="TMC_GPSTMC_TUNER" ; ("AVQ_GPSTMC_TUNER"para Airis)
zoom_limit=75000 ;(74752)
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_GNSPORT"
saved_config_portname="COM"
saved_config_port="1"
auto_tuning="1"
saved_last_frequency="107,5"
saved_last_tuning_mode="0"
show_all_provider_list=1
ignore_all_events="0"

geht noch immer nicht wenn ich noch was ändern muss kannst du mir das bitte markieren?

 

[Overkill4711]

Kann nicht funktionieren wen man sich irgendwas zusammen kopiert! Ihr müsst mal lesen und zum anderen gibt es einen Blaupunkt Bereich.

 

[1984chris]

Danke für deine Antwort, das bringrt ABER auch nicht weiter.