Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Philips Dbox 2 CS Problem

    Nobody is reading this thread right now.
AW: Philips Dbox 2 CS Problem

Bootlog


[ydebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-44.f7.95.07.00.00-79
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (Jun 03 2010 - 02:21:58)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 16
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671024 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.9-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670960 Bytes = 655.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.9-dbox2 (zebradem@zebradem) (gcc version 3.4.6) #1 Do 3. Ju
n 02:22:45 UTC 2010
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2a:11:23
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x004c0000 : "root (squashfs+lzma)"
0x004c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.4 (2010-06-03 02:57:00 UTC)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Philips
Model: D-BOX2 (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
starting /etc/init.d/S18openntpd ...
starting /etc/init.d/S18rdate ...
Mon Sep 19 18:06:58 2011
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
starting /etc/init.d/S30dropbear ...
starting /etc/init.d/S30openvpn ...
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
starting /etc/init.d/S99gui ...
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[CVideo::setVideoFormat] output format: 4:3(LB)

capmtserver provides pmt info, for non-enigma platforms

neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
$Id: moviebrowser.cpp,v 1.39 2010/04/21 10:36:18 dbt Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for readin
g.
CMovieBrowser::loadSettings failed
[mb]->refreshFilterList 20
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 18 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[sectionsd] getUTC: read: Connection timed out
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[zapit] LOCK LOST! trying rezap.
.. channel: 'DMAX'
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] receive timed out. waiting process 296
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
zap failed!
[basicsocket] send_data: Broken pipe (n = 8/8, pid = 244)
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[yhttpd] Webserver starting...
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[zapit] LOCK LOST! trying rezap... channel: 'xxx'
[sectionsd] getUTC: read: Connection timed out


das sat-kabel war nicht angeschlossen, daher findet die box keinen sender!

CCcam-Log

13:50:13.158 CCcam: ===========================================================
==========
13:50:13.165 CCcam: starting CCcam 2.2.1 compiled on Nov 21 2010@02:20:06
13:50:13.167 CCcam: ===========================================================
==========
13:50:13.169 CCcam: online using nodeId 66d48df7211bbbae
13:50:13.369 CCcam: dvb api3 detected
13:50:13.376 CCcam: create 1 cam device(s)

leider wird laut dbox die cam nicht gestartet?!


ich hoffe, ihr damit was anfangen...
 
Zuletzt bearbeitet:
AW: Philips Dbox 2 CS Problem

capmt haste drauf? die CC muss mit der Option -d gestartet werden, sonst gibt die nichts aus

lass bitte die beiden Sachen zur gleichen 'Zeit laufen, inkl Empfang - wir wollen ja sehen, was die Kiste macht, wenn sie das Bild "verliert"
 
AW: Philips Dbox 2 CS Problem

weiter diverse Versuche... der CCcam-Log bleibt immer wie oben...

1. Versuch: CCcam startet mit Box

debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (Jun 03 2010 - 02:21:58)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 16
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671024 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.9-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670960 Bytes = 655.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.9-dbox2 (zebradem@zebradem) (gcc version 3.4.6) #1 Do 3. Ju
n 02:22:45 UTC 2010
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2a:11:23
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x004c0000 : "root (squashfs+lzma)"
0x004c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.4 (2010-06-03 02:57:00 UTC)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Philips
Model: D-BOX2 (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
starting /etc/init.d/S18openntpd ...
starting /etc/init.d/S18rdate ...
Fri Sep 23 16:23:34 2011
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
starting /etc/init.d/S30dropbear ...
starting /etc/init.d/S30openvpn ...
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
starting /etc/init.d/S99gui ...
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[CVideo::setVideoFormat] output format: 4:3(LB)

capmtserver provides pmt info, for non-enigma platforms

neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
$Id: moviebrowser.cpp,v 1.39 2010/04/21 10:36:18 dbt Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for readin
g.
CMovieBrowser::loadSettings failed
[mb]->refreshFilterList 20
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 18 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
01:00:29.985 [timeThread] - 23.09.2011 16:24:08, tim: Fri Sep 23 16:24:08 2011
01:00:30.039 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
01:00:31.050 dmxSDT: going to sleep...
PES, queue 0 normal.
01:00:31.271 eit_set_update_filter, servicekey = 0x4008500df, current version 23

[CBasicClient] connect failed.
/tmp/camd.socket: Connection refused
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[timerd] using config file /var/tuxbox/config/timerd.conf
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[neutrino] timeset event. diff
erence is 1316787811 s, stepping...
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
16:24:20.460 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:24:22.230 EIT Update Filter: Activate cnThread
16:24:28.571 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:24:36.648 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:24:44.786 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:24:52.781 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:24:53.652 eit_set_update_filter, servicekey = 0x4008500df, current version 25
2. Versuch: CCcam über FB gestartet

Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (Jun 03 2010 - 02:21:58)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 16
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671024 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.9-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670960 Bytes = 655.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.9-dbox2 (zebradem@zebradem) (gcc version 3.4.6) #1 Do 3. Ju
n 02:22:45 UTC 2010
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2a:11:23
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x004c0000 : "root (squashfs+lzma)"
0x004c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.4 (2010-06-03 02:57:00 UTC)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Philips
Model: D-BOX2 (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
starting /etc/init.d/S18openntpd ...
starting /etc/init.d/S18rdate ...
Fri Sep 23 16:39:00 2011
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
starting /etc/init.d/S30dropbear ...
starting /etc/init.d/S30openvpn ...
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
starting /etc/init.d/S99gui ...
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[CVideo::setVideoFormat] output format: 4:3(LB)

capmtserver provides pmt info, for non-enigma platforms

neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
$Id: moviebrowser.cpp,v 1.39 2010/04/21 10:36:18 dbt Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for readin
g.
CMovieBrowser::loadSettings failed
[mb]->refreshFilterList 20
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 18 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
01:00:29.945 [timeThread] - 23.09.2011 16:39:33, tim: Fri Sep 23 16:39:33 2011
01:00:30.000 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: Connection refused
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
01:00:31.007 dmxSDT: going to sleep...
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
01:00:31.539 eit_set_update_filter, servicekey = 0x500850308, current version 6
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[neutrino] timeset event. difference is 1316788741 s, stepping...
[timerd] using config file /var/tuxbox/config/timerd.conf
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: Connection refused
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
16:39:51.370 eit_set_update_filter, servicekey = 0x4008500df, current version 25

16:40:14.484 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:40:26.396 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
16:40:38.901 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
avia_gt_ucode: framer error
avia_gt_ucode: framer error
17:09:31.553 [timeThread] - 23.09.2011 17:09:32, tim: Fri Sep 23 17:09:32 2011
[neutrino] timeset event. difference is 1 s, using adjtime(). oldd: 0 us
17:09:31.608 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
3. Versuch: CCcam per Telnet gestartet, wobei kein Bild durch CS kommt

starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Philips
Model: D-BOX2 (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
starting /etc/init.d/S18openntpd ...
starting /etc/init.d/S18rdate ...
Fri Sep 23 17:29:37 2011
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
starting /etc/init.d/S30dropbear ...
starting /etc/init.d/S30openvpn ...
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
starting /etc/init.d/S99gui ...
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
$Id: moviebrowser.cpp,v 1.39 2010/04/21 10:36:18 dbt Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for readin
g.
CMovieBrowser::loadSettings failed
[mb]->refreshFilterList 20
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 18 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
01:00:28.174 [timeThread] - 23.09.2011 17:30:08, tim: Fri Sep 23 17:30:08 2011
[neutrino] timeset event. difference is 1316791780 s, stepping...
01:00:28.228 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
17:30:08.945 dmxSDT: going to sleep...
17:30:09.042 eit_set_update_filter, servicekey = 0x500850308, current version 8
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[timerd] using config file /var/tuxbox/config/timerd.conf
[yhttpd] Webserver starting...
17:30:46.520 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
login[285]: root login on 'pts/0'
17:31:00.644 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
[sectionsd] linkage in current EPG found.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[sectionsd] linkage in current EPG found.
17:32:09.787 eit_set_update_filter, servicekey = 0x4008500df, current version 27

[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
17:33:01.407 eit_set_update_filter, servicekey = 0x500850308, current version 8
[sectionsd] linkage in current EPG found.
[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[sectionsd] linkage in current EPG found.
17:33:13.497 eit_set_update_filter, servicekey = 0x4008500df, current version 27

[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file oavia_av_wdt_thread: video decoding stopped ==> r
estart
r directory
17:35:32.660 eit_set_update_filter, servicekey = 0x500850308, current version 8
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
17:35:46.728 eit_set_update_filter, servicekey = 0x100850017, current version 13

[sectionsd] linkage in current EPG found.
[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[sectionsd] linkage in current EPG found.
17:36:15.230 eit_set_update_filter, servicekey = 0x4008500df, current version 27

[sectionsd] linkage in current EPG found.
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
17:36:41.168 eit_set_update_filter, servicekey = 0x500850308, current version 8
zapit shot down
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Waiting for zapit (max. 9 seconds)
starting pid 327, tty '': '/etc/init.d/rcK'
stoping /etc/init.d/K99gui ...
stoping /etc/init.d/K40tuxmaild ...
stoping /etc/init.d/K40tuxcald ...
stoping /etc/init.d/K31nfsserver ...
stoping /etc/init.d/K30openvpn ...
stoping /etc/init.d/K30dropbear ...
stoping /etc/init.d/K30autofs ...
stoping /etc/init.d/K25cdkVcInfo ...
stoping /etc/init.d/K20inetd ...
stoping /etc/init.d/K18rdate ...
stoping /etc/init.d/K18openntpd ...
stoping /etc/init.d/K16lircd ...
stoping /etc/init.d/K15syslogd ...
stoping /etc/init.d/K10rtc ...
stoping /etc/init.d/K10network ...
stoping /etc/init.d/K05drivers ...
STV6412 found
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
 
AW: Philips Dbox 2 CS Problem

mmh... etwas seltsam die ersten log-files - dort wird beim demux wohl was nciht erledigt / gefunden

dann fehlt beim letzten der Zugriff auf die camd.socket - da gabs wohl beim Neutrino ne Einstellung zu, nur welche

unterscheidliche images haste ja schon geflasht - probier bitte nochmal das PB-Enigma, nimm bitte nen "leeres" & installier mal nur ne CC - kannst die aktuellen nehmen - dann machste Dir mal bitte ne telnet Verbindung zum image auf & startest die mal mit /var/bin/CCcam_VERSION -d - die Ausgabe bräucht ich mal
 
AW: Philips Dbox 2 CS Problem

wo bekomm ich denn nen "leeres" her? folgendes hatte ich ja bereits versucht

Link ist nicht mehr aktiv.
 
AW: Philips Dbox 2 CS Problem

enigma ist drauf, cccam auch

bootlog:

Horizontal
Hi Band
DiSEqC Switch cmd = 00f3
1 DiSEqC cmds to send
no Toneburst (MiniDiSEqC)
FE_SET_FRONTEND OK
<-- tuned
[ENIGMA_DYN] lockWebIf = 1
[ENIGMA] starting httpd
[NET] httpd server started on port 80
console=ttyS0 detected...disable enigma serial http interface
[ConfigFile] Unable to open file /var/tuxbox/config/enigma/mount.conf for readin
g.
[ENIGMA_MOUNT] automountMountPoints...
hdparm: can't open '/dev/ide/host0/bus0/target0/lun0/disc': No such file or dire
ctory
[ENIGMA] ok, beginning mainloop
+ (52) wizard: network
+ (53) wizard: backup
+ (54) wizard: tv system
+ (55) wizard: language
+ (56) wizard: PB_StartWizard
+ (56) wizard: fpudate
+ (57) wizard: timezone
+ (58) wizard: scan
+ (66) eOSDCamView
Initialize OSDCamView...

OSDCamView ready -> Have fun...

+ (66) ePartnerBox

reached rl 75
stopping permanent timeshift ...
------------> changed! 0
stopping permanent timeshift ...
------------> changed! 0
------------> changed! f
AUDIO_GET_STATUS - stopped
VIDEO_GET_STATUS - stopped
DMX_SET_PES_FILTER(0x4ff) - video - ok
DMX_SET_PES_FILTER(0x4ff) - pcr - ok
DMX_SET_PES_FILTER(0x500) - audio - ok
DMX_START (pcr) - ok
DMX_START (video) - PES, queue 0 normal.
ok
VIDEO_PLAY - ok
AUDIO_PLAY - ok
DMX_START (audio) - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt running thread...(024)
TuxTxt service started 24
DMX_SET_PES_FILTER(0x24) - vtxt - ok
DEMUX_START - vtxt - ok
start PAT on demux0
start TDT on demux0
<-- tuned
stopping permanent timeshift ...
------------> changed! f
AUDIO_GET_STATUS - playing
DEMUX_STOP - audio - ok
VIDEO_GET_STATUS - playing
DEMUX_STOP - video - ok
DEMUX_STOP - pcr - ok
AUDIO_STOP - ok
VIDEO_STOP - ok
fd.video closed
TuxTxt stopped service 24
DEMUX_STOP - vtxt - ok
stopping permanent timeshift ...
------------> changed! 0
------------> changed! f
AUDIO_GET_STATUS - stopped
VIDEO_GET_STATUS - stopped
DMX_SET_PES_FILTER(0x4ff) - video - ok
DMX_SET_PES_FILTER(0x4ff) - pcr - ok
DMX_SET_PES_FILTER(0x500) - audio - ok
DMX_START (pcr) - ok
DMX_START (video) - PES, queue 0 normal.
ok
VIDEO_PLAY - ok
AUDIO_PLAY - ok
DMX_START (audio) - ok
TuxTxt running thread...(024)
TuxTxt service started 24
DMX_SET_PES_FILTER(0x24) - vtxt - ok
DEMUX_START - vtxt - ok
start PAT on demux0
start TDT on demux0
<-- tuned
stopping permanent timeshift ...
------------> changed! f
AUDIO_GET_STATUS - playing
DEMUX_STOP - audio - ok
VIDEO_GET_STATUS - playing
DEMUX_STOP - video - ok
DEMUX_STOP - pcr - ok
AUDIO_STOP - ok
VIDEO_STOP - ok
fd.video closed
TuxTxt stopped service 24
DEMUX_STOP - vtxt - ok
stopping permanent timeshift ...
------------> changed! 0
------------> changed! f
AUDIO_GET_STATUS - stopped
VIDEO_GET_STATUS - stopped
DMX_SET_PES_FILTER(0x4ff) - video - ok
DMX_SET_PES_FILTER(0x4ff) - pcr - ok
DMX_SET_PES_FILTER(0x500) - audio - ok
DMX_START (pcr) - ok
DMX_START (video) - PES, queue 0 normal.
ok
VIDEO_PLAY - ok
AUDIO_PLAY - ok
DMX_START (audio) - ok
TuxTxt running thread...(024)
TuxTxt service started 24
DMX_SET_PES_FILTER(0x24) - vtxt - ok
DEMUX_START - vtxt - ok
start PAT on demux0
start TDT on demux0
<-- tuned
[eDVB] restart Samba
[eDVB] do nfs/cifs/smbfs mounts
FE_SET_FRONTEND OK
[TUNE] tune failed
picon off ...
killall: nmbd: no process killed
[FONT] creating new font color cache entry 441f1f1f .. 00f0f0f0
killall: smbd: no process killed
sh: nmbd: not found
[FE] evt. locked
[FE] start update transponder data timer
------------> changed! 0
start PAT on demux0
start TDT on demux0
[FONT] creating new font color cache entry 333a426c .. 0097baf0
PATready (0)
start PMT on demux0
[FE] evt. locked
[FE] start update transponder data timer
------------> changed! 0
start PAT on demux0
start TDT on demux0
PMTready (0)
------------> changed! 40
nee, doch nicht (state ist 2)
PMT version = 19
PATready (0)
start PMT on demux0
PMTready (0)
------------> changed! 0
[eDVBCAHandler] dont send the self pmt version
picon off ...
PMT version = 19
EITready (0)
[FONT] creating new font color cache entry 441f1f1f .. 00ffc000
EIT version = 28
TDTready 0
[TIME] we have correction (0)... use
[TIME] time update to 15:04:35
[TIME] time_difference is 1318006200
[TIME] set Linux Time
[EPGC] time updated.. start EPG Mainloop
[EPGC] next update in 2 sec
[EPGC] not cached yet
[eTimerManager] setNextEvent
[eTimerManager] updated ( 0 waiting events in list )
SDTready (0)
[EPGC] start caching events(1316955878)
[EPGC] si schedule data avail.. abort mhw reader
[EPGC] abort non avail schedule_other reading
[EPGC] stop nownext
[EPGC] stop schedule
[EPGC] stop caching events(1316955896)
[EPGC] next update in 60 min
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[FONT] creating new font color cache entry 333a428c .. 00f0f0f0
[FONT] creating new font color cache entry 333f3f3f .. 00ffc000
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
EITready (0)
EIT version = 29
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 241767 bytes for cache used
EITready (0)
EIT version = 30
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240241 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240241 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240241 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240241 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240241 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
EITready (0)
EIT version = 31
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240211 bytes for cache used
EITready (0)
EIT version = 0
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240169 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240169 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240169 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 240169 bytes for cache used

cam kann ich per telnet nicht starten, kommt immer folgende meldung:

dbox login: root


BusyBox v1.17.3 (2010-12-19 11:39:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # cd /var/bin
/var/bin # ls
CCcam_2.2.1 camd2
/var/bin # CCcam_2.2.1 -d
-sh: CCcam_2.2.1: not found
/var/bin #
 
AW: Philips Dbox 2 CS Problem

haste die Rechte für die CC gesetzt? die muss sich starten lassen, haste die aus dem online-update geholt?
 
AW: Philips Dbox 2 CS Problem

rechte stehen auf 755, cccam lässt sich nicht starten ist aus online update. camd2 lässt sich starten.
 
AW: Philips Dbox 2 CS Problem

sher seltsam ...

wechsel mal bitte in die / und start mal unter Angabe des kompletten Pfades, also /var/bin/CCCam_2.2.1 -d

bzw alternativ, im Verzeichniss mit ./CCcam_2.2.1 -d
 
AW: Philips Dbox 2 CS Problem

starten geht mit /var/bin/CCcam_2.2.1 -d, allerdings wird nichts hell und auf der box auch nicht angezeigt, dass die cam läuft?!

17:22:58.942 CCcam: ======================================================================
17:22:58.949 CCcam: starting CCcam 2.2.1 compiled on Nov 21 2010@02:20:06
17:22:58.951 CCcam: ======================================================================
17:22:58.953 CCcam: online using nodeId cc1dc165bcb5ab8a

17:22:59.068 CCcam: dvb api3 detected
17:22:59.073 CCcam: create 1 cam device(s)
 
AW: Philips Dbox 2 CS Problem

nee.. die läuft nicht - bindet ja nichts ein, haste ne CCcam.cfg drauf?
 
AW: Philips Dbox 2 CS Problem

ja ist drauf, sonst könnt ich ja nich mit c-line zum server verbinden. ist ausser der c-line auch nix drin. und die ist wie bei den anderen dboxen auch aufgebaut. habs auch schon mit einer der anderen, funktionierenden lines ohne erfolg versucht.
 
AW: Philips Dbox 2 CS Problem

mmh.. hab grade mal versucht, das nach zu vollziehen - da kommt echt keine Ausgabe mehr, scheint an den syslog zu liegen, dafür gibts zwar nen Schalter in der CC aber der scheint nciht zu funktionieren, also bliebe lediglich wohl nen externes Programm zu loggen

kannste ev was auf dem server erkennen, werden die Anfragen dort beantwortet?
 
AW: Philips Dbox 2 CS Problem

im cccam-log aufm server kann ich sehen, dass die box connected und es auch weiterhin tut, selbst wenn die box freezt. wie siehts denn mit ner älteren cccam-version aus. funzt der log da?
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…