Neue Sky V14, keine Freischaltung per Oscam, nur 2 Emm's, Receiver: Octagon 1028

[Fantomaso]

Hallo, habe zum Wochenende einen Sky Receiver mit neuer V14 Karte bekommen. Nach stundenlangen einlesen habe ich zwar schon einen gewissen Überblick gewonnen, aber nach unzähligen Fehlerversuchen meine Karte freizuschalten, möchte ich nun mal die Profis fragen. Die Karte wird im unteren Schacht erkannt, aber es kommen nur täglich 2 verschiedene Emm's (82701...). Warum kommen nicht mehr Signale? Ich bin mir sicher, wenn ich die Karte in den Sky Receiver schiebe, ist sie nach wenigen Minuten freigeschaltet, aber dann wohl unbrauchbar für meinen Sat Receiver Octagon 1028p.

>> OSCam << cardserver log switched at Sun Jun 7 18:34:17 2015

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Jun 7 18:34:17 2015
-------------------------------------------------------------------------------
2015/06/07 18:34:17 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:17 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10611 (sh4-linux-stapi-ssl)
2015/06/07 18:34:17 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (1 ms) by V14 - Sky Krimi
2015/06/07 18:34:17 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:17 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:17 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:17 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (1 ms) by V14 - Sky Krimi
2015/06/07 18:34:17 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:17 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:18 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:18 5AB218 r (reader) V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/06/07 18:34:18 5AB218 r (reader) V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/06/07 18:34:18 5AB218 r (reader) V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/06/07 18:34:18 5AB218 r (reader) V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/06/07 18:34:18 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (73 ms) by V14 - Sky Krimi
2015/06/07 18:34:18 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:18 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:18 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:18 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (1 ms) by V14 - Sky Krimi
2015/06/07 18:34:18 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:18 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:18 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:18 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (1 ms) by V14 - Sky Krimi
2015/06/07 18:34:19 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:19 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:19 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:19 5ABF70 c (ecm) dvbapi (098C&000000/01FB/0017/98:A65D186D02BBEAD7F10439D7DC562CFF): not found (1 ms) by V14 - Sky Krimi
2015/06/07 18:34:19 5ABF70 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 4 disabled ecmpids!
2015/06/07 18:34:19 5ABF70 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0000 VPID 01FF
2015/06/07 18:34:19 5ABF70 c (dvbstapi) overtake: clear pid: 0
2015/06/07 18:34:19 5ABF70 c (dvbstapi) set_filter: dev: 2 FAl: 0 FAs: 0 FS: 852049
2015/06/07 18:34:19 5ABF70 c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2015/06/07 18:37:56 59A840 h (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/07 18:37:56 59A840 h (config) userdb 1 accounts freed
2015/06/07 18:40:26 59A840 h (webif) all debug_level=4
2015/06/07 18:40:26 5AB218 r (reader) V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/07 18:40:34 59A840 h (-) -- Skipped 15 duplicated log lines --
2015/06/07 18:40:34 59A840 h (webif) all debug_level=6
2015/06/07 18:40:34 5AB218 r (reader) V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/07 18:40:38 59A840 h (-) -- Skipped 7 duplicated log lines --
2015/06/07 18:40:38 59A840 h (webif) all debug_level=7
2015/06/07 18:40:38 59A840 h (webif) WebIf: Origin checked. Result: access from 192.168.1.3 => allowed
2015/06/07 18:40:38 0 (work) start reader thread action 13
2015/06/07 18:40:38 5AB218 r (work) data from add_job action=13 client r V14
2015/06/07 18:40:38 5AB218 r (reader) V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/07 18:40:39 0 (-) -- Skipped 1 duplicated log lines --
2015/06/07 18:40:39 0 (work) start reader thread action 13
2015/06/07 18:40:39 5AB218 r (work) data from add_job action=13 client r V14
2015/06/07 18:40:39 5AB218 r (reader) V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/06/07 18:40:40 59A840 h (-) -- Skipped 1 duplicated log lines --
2015/06/07 18:40:40 59A840 h (webif) all debug_level=0
2015/06/07 18:49:39 5ABF70 c (reader) V14 [videoguard2] Successfully added EMM to /var/log/V14_unique_emm.log
2015/06/07 19:07:16 5ABF70 c (-) -- Skipped 1 duplicated log lines --

 

[hoeced]

AW: Neue Sky V14, keine Freischaltung per Oscam, nur 2 Emm's, Receiver: Octagon 1028

du solltest deine configs auch mal posten

 

[Fantomaso]

AW: Neue Sky V14, keine Freischaltung per Oscam, nur 2 Emm's, Receiver: Octagon 1028

Hier meine Konfiguration (habe ich vorkonfiguriert so installiert).

Spoiler

oscam.config
[global]
logfile = /var/log/oscam.log
nice = -1
preferlocalcards = 1
emmlogdir = /var/log/
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
user = dvbapi
boxtype = duckbox
[webif]
httpport = 8888
httpuser = admin
httppwd = oscam
httprefresh = 20
httpallowed = 10.0.0.1-254.254.254.254

oscam.user
[account]
user = dvbapi
group = 1,2,3
au = V14 <== Das habe ich abgeändert, stand vorher: au = 1

oscam.server
[reader]
label = OSEmu
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D05
group = 1
[reader]
label = V14
protocol = stapi
device = SC0
mhz = 357
cardmhz = 357
caid = 098C
group = 1
emmcache = 1,1,2
ins7e11 = 15
boxid = 12345678
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

oscam.dvbapi
# Stapi Tuner 1 ###
S: PTI pmt1_1.tmp
S: PTI pmt1_2.tmp
S: PTI pmt1_3.tmp
# Stapi Tuner 2 ###
S: PTI1 pmt2_1.tmp
S: PTI1 pmt2_2.tmp
S: PTI1 pmt2_3.tmp
# Stapi Timeshift #
S: PTI2 pmt3_1.tmp
P: 0D05
P: 098C
I: 0
# I:0 als _letzten_ Eintrag stehen lassen

 

[Pnaler]

AW: Neue Sky V14, keine Freischaltung per Oscam, nur 2 Emm's, Receiver: Octagon 1028

beide reader sind bei dir group=1,das ist nicht richtig,jeder reader muss eine eigene nummer haben.
eintrag "ndsversion=2" in server hinzufügen
in der dvbapi hinter P: 098C eine 1 reinmachen P: 098C 1

 

[B.G.A.]

AW: Neue Sky V14, keine Freischaltung per Oscam, nur 2 Emm's, Receiver: Octagon 1028

mal aus deiner oscam.config

pmt_mode = 5

rausnehmen. Das au=1 muss genau so funktionieren wie jetzt mit au=V14.
Im V14-Reader noch

ndsversion=2

ergänzen. Was machen die ganzen Parameter in der oscam.dvbapi? Ein

P: 0D05
P: 098C
I: 0

solte doch reichen?