HILFE!! Client dunkel aber Zuhause ist alles gut?

[bandit600e]

Hallo zusammen,,

ich hab irgendwie in letzter Zeit kein Glück und mein Fachwissen ist auch begrenzt.
Erst die Umstellung von S** die ich mit Hilfe hier aus dem Forum dann letztendlich
doch noch gut überstanden habe. Danach gings ne Woche und jetzt ist beim Clienten
dunkel.

Ich hab Alles gecheckt und alles neu gestartet aber irgendwie bin ich mit meinem Latain am Ende
Das Einzige was mir im Log auffällig vorkommt ist das hier:

Spoiler

2016/06/25 00:16:04 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:16:04 1F524615 c (dvbapi) Demuxer 0 ca3 is using index 0 for streampid 0106 -> skip, odd part of cw already written!

könnt Ihr mir sagen was das sein könnte?

PS: Wenn mehr vom log gewünscht ist, dann bitte sagen mit welchem Debug Level ich arbeiten soll.

Vielen Dank schon mal im Vorraus.

conf

Spoiler

[global]
logfile = /var/cache/oscam.log
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
nice = -1
maxlogsize = 400
preferlocalcards = 1
emmlogdir = /var/cache/

[cache]
delay = 120
max_time = 18

[cccam]
port = 12000
nodeid = 31EDBB2E10F3153E
version = 2.3.0
reshare = 1
reshare_mode = 0

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = local
boxtype = dreambox

[webif]
httpport = 94
httpuser = ccccccc
httppwd = cccccccccccccc
httprefresh = 10
httpallowed = cccccccccccccc
httpdyndns = ccccccccccccccccc

- - - - - - - - - -


dvbapi

Spoiler

P: 0D05
P: 098C
P: 0500
P: 1830
I: 0

server

Spoiler

[reader]
enable = 1
label = HDplus
Protocol = internal
detect = CD
device = /dev/sci1
emmcache = 1,3,2
group = 2
rsakey = kkkkkk
boxkey = kkkkkk
mhz = 1
cardmhz = 2700d
caid = 1830

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 1
mhz = 357
cardmhz = 2700
caid = 098C
boxid = kkkkkkkkkkkkk
ins7e11 = 15
detect = cd
group = 1
# ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-u = 1
blockemm-g = 1
# blockemm-bylen = 1-27,32,34,36-37,61-68,70-120,122,124-125,127,137-255
saveemm-u = 1
ndsversion = 2

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8 ;0D03:000000,000004,000008,000024,000028;0D05:0000 00,000004,000010;090F:000000;0500:000000,030B00,02 3800,021110,007400,007800;1801:000000;0604:000000
group = 3
emmcache = 1,1,2
auprovid = 030B00

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Mit dem Eintrag In der oscam.conf
[dvbapi]
extended_cw_api = 2

sollte die Fehlermeldung verschwinden.

Poste mal die oscam.user und das oscam.log nach reboot.

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

user

Spoiler

[account]
user = local
group = 1,2,3
au = 1
betatunnel = 1833.FFFF:1702

[account]
user = hallo
pwd = aber
group = 1,2
cccmaxhops = 2
cccreshare = 1
#betatunnel = 1833.FFFF:1702

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Ändere mal ..

Spoiler

[account]
user = local
group = 1,2,3
au = 1

[account]
user = hallo
pwd = aber
group = 1,2
cccmaxhops = 2
cccreshare = 1

Hast Du denn auch mal die Dyndns-Einstellungen und das Port forwarding kontrolliert ?

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Spoiler

2016/06/25 00:56:06 00000000 s (main) System name = Linux
2016/06/25 00:56:06 00000000 s (main) Host name = dm8000
2016/06/25 00:56:06 00000000 s (main) Release = 3.2-dm8000
2016/06/25 00:56:06 00000000 s (main) Version = #1 SMP Sun Jun 21 17:23:43 CEST 2015
2016/06/25 00:56:06 00000000 s (main) Machine = mips
2016/06/25 00:56:06 00000000 s (main) Stb model = dm8000
2016/06/25 00:56:06 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 15072
2016/06/25 00:56:06 00000000 s [Emu] oscam-emu version 728
2016/06/25 00:56:06 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2016/06/25 00:56:06 00000000 s (main) signal handling initialized
2016/06/25 00:56:06 00000000 s (config) 5 provid's loaded
2016/06/25 00:56:06 00000000 s (config) 355 service-id's loaded in 9 ms
2016/06/25 00:56:06 00000000 s (net) cccam: initialized (fd=5, port=12000)
2016/06/25 00:56:06 00000000 s (reader) HDplus [internal] creating thread for device /dev/sci1
2016/06/25 00:56:06 00000000 s (reader) V14 [internal] creating thread for device /dev/sci0
2016/06/25 00:56:06 00000000 s (reader) emulator [emu] creating thread for device emulator
2016/06/25 00:56:06 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/25 00:56:06 00000000 s (main) waiting for local card init
2016/06/25 00:56:06 54CD581D r (reader) HDplus [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2016/06/25 00:56:06 54CD581D r (reader) HDplus [internal] Reader sci internal, detected box type: dm8000
2016/06/25 00:56:06 7ED8E5DF r (reader) V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2016/06/25 00:56:06 7ED8E5DF r (reader) V14 [internal] Reader sci internal, detected box type: dm8000
2016/06/25 00:56:06 5F54072D r reading key file: /var/tuxbox/config/SoftCam.Key
2016/06/25 00:56:06 5F54072D r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2016/06/25 00:56:06 00000000 [Emu] info: FFDecsa parallel mode = 64
2016/06/25 00:56:06 1F93076D h (webif) webif: decompressed 166070 bytes back into 395904 bytes
2016/06/25 00:56:06 1F93076D h (webif) HTTP Server running. ip=0.0.0.0 port=94
2016/06/25 00:56:07 54CD581D r (reader) HDplus [internal] card detected
2016/06/25 00:56:07 7ED8E5DF r (reader) V14 [internal] card detected
2016/06/25 00:56:07 5F54072D r (reader) emulator [emu] card detected
2016/06/25 00:56:08 5F54072D r (reader) emulator [emu] found card system emu
2016/06/25 00:56:08 5F54072D r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/06/25 00:56:08 5F54072D r reading key file: /var/tuxbox/config/SoftCam.Key
2016/06/25 00:56:09 7ED8E5DF r (reader) V14 [internal] ATR: xxxxxxxx
2016/06/25 00:56:09 7ED8E5DF r (reader) V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2016/06/25 00:56:09 7ED8E5DF r (reader) V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2016/06/25 00:56:09 7ED8E5DF r (reader) V14 [internal] Buffers readed 0 bytes total time_us 75192
2016/06/25 00:56:09 54CD581D r (reader) HDplus [internal] ATR: xxxxxxxx
2016/06/25 00:56:09 54CD581D r (reader) HDplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 00:56:09 54CD581D r (reader) HDplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2016/06/25 00:56:09 54CD581D r (reader) HDplus [internal] Buffers readed 0 bytes total time_us 75167
2016/06/25 00:56:09 7ED8E5DF r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/06/25 00:56:10 54CD581D r (reader) HDplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2016/06/25 00:56:10 54CD581D r (reader) HDplus [internal] Card responded ok for ifsd request of 251
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Card type: P1TV
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Rom version: 20AA
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Credit available on card: 0 euro
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Extended 4C detected
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] FuseByte: 05
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Region Code: 00BO0102
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Country Code: DEU
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] Pincode read: 1777
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] PCB settings: FF FF FF FF
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] ready for requests
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [internal] found card system videoguard2
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] card detected
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] ------------------------------------------------------------------
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] +---------+----------+---------------------+---------------------+
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 0058 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 005a --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 0056 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 0057 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 007b --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 007d --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 0081 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 008e --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00c0 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00c8 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00c9 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00ca --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00cb --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00c7 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00f0 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00fa --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00f3 --| 2016/08/01-01:00:00 |
2016/06/25 00:56:10 7ED8E5DF r (reader) V14 [videoguard2] |-- 00 ---|-- 00ff --| 2016/08/01-01:00:00 |
2016/06/25 00:56:11 54CD581D r (reader) HDplus [internal] detect native nagra card
2016/06/25 00:56:11 7ED8E5DF r (reader) V14 [videoguard2] ------------------------------------------------------from-ins70--
2016/06/25 00:56:11 54CD581D r (reader) HDplus [internal] ready for requests
2016/06/25 00:56:11 54CD581D r (reader) HDplus [internal] found card system nagra
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] ROM: D N A S P 1 4 2
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] REV: R e v G C 6
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] SER: ############
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] CAID: 1830
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] Prv.ID: 00 00 00 00
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] IRD ID: ############
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] active to: 2016/08/15 12:59
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] -----------------------------------------
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] |id |tier |valid from |valid to |
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] +----+--------+------------+------------+
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] |8011|0BEA |2013/06/17 |2016/07/02 |
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] |8011|0064 |2012/06/16 |2013/06/17 |
2016/06/25 00:56:11 54CD581D r (reader) HDplus [nagra] -----------------------------------------
2016/06/25 00:56:12 00000000 s (main) init for all local cards done
2016/06/25 00:56:12 00000000 s (emmcache) loaded 89 emmcache records from /var/tuxbox/config/oscam.emmcache in 7 ms
2016/06/25 00:56:12 00000000 s (emmcache) loaded 42 emmstat records from /var/tuxbox/config/oscam.emmstat in 2 ms
2016/06/25 00:56:12 00000000 s (anticasc) anti cascading disabled
2016/06/25 00:56:12 5F6D7DDB c (client) anonymous disconnected from
2016/06/25 00:56:12 1F524615 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
2016/06/25 00:56:12 07EECA61 c (client) anonymous disconnected from
2016/06/25 00:56:12 72F53885 c (client) anonymous disconnected from
2016/06/25 00:56:12 69C8B764 c (client) anonymous disconnected from
2016/06/25 00:56:12 1F524615 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2016/06/25 00:56:12 1F524615 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CEC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19EC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AEC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EEC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DEC PROVID: 000000
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0021 length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 0106 length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0107 length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 01ff length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0203 length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0205 length: 0)
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 serving srvid EF75 (1830@000000:EF75 unknown) on adapter 0000 camask 0008 index 0003 pmtpid 0061
2016/06/25 00:56:12 1F524615 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1AEC ANY CHID PMTPID 0061 VPID 01FF
2016/06/25 00:56:12 7ED8E5DF r (reader) V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2016/06/25 00:56:12 7ED8E5DF r (reader) V14 [videoguard2] classD3 ins54: no cw --> Card is not paired (Debug-ECM-Info: 0F_06 00 00 20 00 08 03)
2016/06/25 00:56:12 1F524615 c (ecm) local (098C@000000/07D2/EF75/9D:1150FA474B1097E2552FF9C2ED2B46CF:0F06000020): not found (73 ms) by V14 - ProSieben HD
2016/06/25 00:56:13 1F524615 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1830 PROVID 000000 ECMPID 1CEC ANY CHID PMTPID 0061 VPID 01FF
2016/06/25 00:56:13 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:14 1F524615 c (-) -- Skipped 1 duplicated log lines --
2016/06/25 00:56:14 1F524615 c (ecm) local (1830@000000/0000/EF75/92:0B8611384426880896D6A18F9DCF54FC): found (290 ms) by HDplus
2016/06/25 00:56:14 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:14 1F524615 c (ecm) local (1830@000000/0000/EF75/92:B7F1F3FD9B98EBA8A488395C99B90133): found (428 ms) by HDplus
2016/06/25 00:56:21 2E7E38BA c (client) encrypted cccam-client granted (steffenz, au=off)
2016/06/25 00:56:21 5DA700B0 c (client) encrypted cccam-client granted (rett, au=off)
2016/06/25 00:56:21 391F9913 c (client) encrypted cccam-client granted (jonas, au=off)
2016/06/25 00:56:21 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:21 1F524615 c (ecm) local (1830@000000/0000/EF75/92:E3001B5D0A11AAB62315515F16B1B232): found (292 ms) by HDplus
2016/06/25 00:56:21 4DF97C74 c (client) encrypted cccam-client 178.27.100.180 granted (musik, au=off)
2016/06/25 00:56:28 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:28 1F524615 c (ecm) local (1830@000000/0000/EF75/92:53D80267CD007CBFF9D4C975BE52B4AC): found (292 ms) by HDplus
2016/06/25 00:56:35 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:35 1F524615 c (ecm) local (1830@000000/0000/EF75/9210F19F858666E719F6816EB79208568): found (292 ms) by HDplus
2016/06/25 00:56:42 1F524615 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2016/06/25 00:56:42 1F524615 c (ecm) local (1830@000000/0000/EF75/92:F77CB801199595014A7CD637AF0D9B1D): found (292 ms) by HDplus

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Die user müssen im Web-IF unter dem Reiter USERS mit Ihrer IP Adresse angezeigt werden (connected)
Hast Du das kontrolliert ?

Die Abfrage der HD+ - Sender von der V14 mittels einer oscam.services verbieten ...

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 1
mhz = 357
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
services = !hdplus
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-u = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.services

Spoiler

[hdplus]
caid = 098C
srvid = 0002,2777,30D4,277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F,157C,1581,EF78,2774,2EAF

Die oscam.dvbapi musst Du ändern ...

Spoiler

P: 1830
P: 098C
P: 0500
I: 0

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Die Einstellungen hab ich kontrolliert und den DYNDNS sogar ganz neu aufgesetzt.

Die Fritzbox ist wie folgt eingestellt.

- - - - - - - - - -

Das mit dem Sniping Tool hat wohl nicht funktioniert

hab Port 12000 an Port 12000 frei gegeben

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Du solltest den (Standard-)port 12000 (tcp) für cccam auf einen anderen, höheren port ändern ..

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Die User sind im Webif mit IP angegeben und connected

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Dann sind die user mit dem oscam server auch verbunden - leider sieht man im log nicht die Meldungen, wenn ein client auf die Karte zugreift ...

Nach den ganzenn Änderungen oben, dann einen reboot initiieren.

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Den Port kann ich nicht so einfach ändern der Client ist nicht sehr begabt in solchen Sachen und ich kann nicht so einfach hin

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Nunja .. dann solltest Du, wenn Du mal beim client bist, das mal ändern .. ist zur eigenen Sicherheit besser.

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

ich hab da so ne Vermutung, dass es am DYNDNS liegen könnte, kannst du mir evtl einen anderen Anbieter raten?

Mit Dyndns.com bin ich nicht zufrieden, muss nebenbei noch einen Laptop mit dem Programm von denen laufen lassen.


Dann muss ich halt doch mal zum Clienten

 

[webman2]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Wenn Du eine FritzBiox als Router einsetzt ..
https://www.digital-eliteboard.com/263268-myfritz-dyndns-alternative-fr-fritzbox.html

Sonst wird hier gerne über den (kostenlosen) Dienst no-ip geschrieben: noip.com

 

[bandit600e]

AW: HILFE!! Client dunkel aber Zuhause ist alles gut?

Guten Morgen,

wollt jetzt noch mal nen Neustart machen bevor ich mit dem
neuen DYN teste jetzt bringt der DCC E2 "Error in function Send, Socket is not connected"
Kann das vielleicht erklären wieso es nicht geht?