HD02 Karte und Smartmouse, HELP

[pit63]

Hallo,
habe einen vu+ duo2 image VTI 11, und eine ganz neue smartmouse, HD02, ORF, TNT karten.
ORF und TNT (frankreich) karten stecken im vu+, und lauffen 1A mit oscam 11342.

Habe HD02 im vu+ probiert mit angepassten READER, die HD02 laueft 1A, also sind die rechte ok.

Will nun, dass die HD02 mit Smartmouse laueft.

Habe hier und dort, mehere einstellungen probiert, aber die HD02 bringe ich nicht zum lauffen mit der smartmouse.

Koennte mir jemand helfen und mir genau sagen wie ich die schalter einstellen muss, was ich in osacam.conf, oscam.server, oscam.user eingeben muss und vielleicht auch in anderen datein.

Waere echt nett.

Danke

 

[dodo83]

in der

Spoiler: oscam.server

[reader]
label = HD02
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
cardmhz = 368
group = 1

die

Spoiler: Easymouse

Du musst angemeldet sein, um Bilder zu sehen.

in den anderen Dateien halt Caid mit eintragen oder die Group, je nach dem wie und was du nutzt, ansonsten mal alles posten

 

[pit63]

Danke, habe es so gemacht wie beschrieben, geht leider nicht, auf STATUS steht: ERROR. Und habe dies:

• 
  
  Spoiler

  [*]2017/02/03 09:39:35 1287B4A5 r (reader) HD02 [mouse] card detected
  [*]2017/02/03 09:39:35 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75167
  [*]2017/02/03 09:39:36 14DE94D2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  [*]2017/02/03 09:39:36 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75147
  [*]2017/02/03 09:39:38 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75146
  [*]2017/02/03 09:39:39 1287B4A5 r (reader) HD02 [mouse] Error activating card.
  [*]2017/02/03 09:39:39 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75155
  [*]2017/02/03 09:39:41 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75153
  [*]2017/02/03 09:39:41 14DE94D2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  [*]2017/02/03 09:39:42 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75171
  [*]2017/02/03 09:39:43 1287B4A5 r (reader) HD02 [mouse] Error activating card.
  [*]2017/02/03 09:39:43 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75158
  [*]2017/02/03 09:39:45 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75152
  [*]2017/02/03 09:39:46 1287B4A5 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75145
  [*]2017/02/03 09:39:46 14DE94D2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  [*]2017/02/03 09:39:47 1287B4A5 r (reader) HD02 [mouse] Error activating card.
  [*]2017/02/03 09:39:47 1287B4A5 r (reader) HD02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  [*]2017/02/03 09:39:47 1287B4A5 r (reader) HD02 [mouse] card initializing error

Spoiler

onscam.conf:
[global]
logfile = /dev/null
nice = -1
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 70
user = dvbapi
ecminfo_type = 4
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httpuser =
httppwd =
httptpl = /etc/tuxbox/config/
httprefresh = 5
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log =1







oscam.user:
[account]
user = dvbapi
description = dvbapi
failban = 1
au = 1
emmreassembly = 1
group = 1,2,3,4,5,6,7,8,9
cccmaxhops = -1
cccreshare = 1
cccignorereshare = 1

 

[dodo83]

nimm raus

mhz = 600
cardmhz = 368

und stelle die Maus auf

unten unten unten egal

OScam neu starten und log ab start posten

 

[Tec-Hi]

Hi

ein mal den Inhalt von oscam.version posten,
ist dein Oscam mit Usbgerätesupport compiliert ?

HF

 

[pit63]

Spoiler

nimm raus

mhz = 600
cardmhz = 368

und stelle die Maus auf

unten unten unten egal

OScam neu starten und log ab start posten

Gemacht. Bleibt aber dunkel.

Spoiler: start

• 2017/02/03 11:00:38 00000000 s (main) System name = Linux
• 2017/02/03 11:00:38 00000000 s (main) Host name = vuduo2
• 2017/02/03 11:00:38 00000000 s (main) Release = 3.13.5
• 2017/02/03 11:00:38 00000000 s (main) Version = #1 SMP Sun Nov 27 15:00:47 CET 2016
• 2017/02/03 11:00:38 00000000 s (main) Machine = mips
• 2017/02/03 11:00:38 00000000 s (main) Stb model = dm8000
• 2017/02/03 11:00:38 00000000 s (main) Stb vumodel = vuduo2
• 2017/02/03 11:00:38 00000000 s (main) Stb boxtype = vuduo2
• 2017/02/03 11:00:38 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 320
• 2017/02/03 11:00:38 00000000 s (aes) 14 AES key(s) added on reader TNT_V5 for 0500@030b00
• 2017/02/03 11:00:38 00000000 s (emu) OSCam-Emu version 734
• 2017/02/03 11:00:38 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
• 2017/02/03 11:00:38 00000000 s (main) signal handling initialized
• 2017/02/03 11:00:38 00000000 s (config) 23 provid's loaded
• 2017/02/03 11:00:38 00000000 s (config) 109 service-id's loaded in 3 ms
• 2017/02/03 11:00:38 00000000 s (config) 15 tier-id's loaded
• 2017/02/03 11:00:38 00000000 s (reader) ORF_CRYPTOWORKS_0D98 [internal] creating thread for device /dev/sci1
• 2017/02/03 11:00:38 00000000 s (reader) HD02 [mouse] creating thread for device /dev/ttyUSB0
• 2017/02/03 11:00:38 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/02/03 11:00:38 00000000 s (main) waiting for local card init
• 2017/02/03 11:00:38 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2017/02/03 11:00:38 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Reader sci internal, detected box type: vuduo2
• 2017/02/03 11:00:38 5AAB7A55 h (webif) webif: decompressed 180319 bytes back into 469016 bytes
• 2017/02/03 11:00:38 5AAB7A55 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2017/02/03 11:00:39 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75160
• 2017/02/03 11:00:39 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75153
• 2017/02/03 11:00:39 1C8EC63E r (reader) HD02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2017/02/03 11:00:39 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] card detected
• 2017/02/03 11:00:39 1C8EC63E r (reader) HD02 [mouse] card detected
• 2017/02/03 11:00:40 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75145
• 2017/02/03 11:00:40 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
• 2017/02/03 11:00:41 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75200
• 2017/02/03 11:00:42 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75207
• 2017/02/03 11:00:43 1C8EC63E r (reader) HD02 [mouse] Error activating card.
• 2017/02/03 11:00:43 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Buffers readed 0 bytes total time_us 3099520
• 2017/02/03 11:00:43 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
• 2017/02/03 11:00:43 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Calculated work ETU is 41.33 us reader mhz = 450
• 2017/02/03 11:00:44 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75155
• 2017/02/03 11:00:45 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75149
• 2017/02/03 11:00:46 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75144
• 2017/02/03 11:00:46 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] Buffers readed 0 bytes total time_us 3099280
• 2017/02/03 11:00:47 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
• 2017/02/03 11:00:47 1C8EC63E r (reader) HD02 [mouse] Error activating card.
• 2017/02/03 11:00:48 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75182
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] card detected
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] type: CryptoWorks
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] providers: 4 (04,08,0C,10)
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [internal] found card system cryptoworks
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 7FF7, date: 2017/02/02 - 2017/02/12, name: Product 7FF7
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0002, date: 2017/01/29 - 2017/10/06, name: Product 0002
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0001, date: 2017/02/01 - 2017/10/09, name: Product 0001
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: FFE0, date: 2017/01/28 - 2017/10/05, name: Product FFE0
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
• 2017/02/03 11:00:48 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
• 2017/02/03 11:00:49 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
• 2017/02/03 11:00:49 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
• 2017/02/03 11:00:49 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
• 2017/02/03 11:00:49 15986A95 r (reader) ORF_CRYPTOWORKS_0D98 [cryptoworks] ready for requests
• 2017/02/03 11:00:49 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75138
• 2017/02/03 11:00:50 1C8EC63E r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75147
• 2017/02/03 11:00:51 1C8EC63E r (reader) HD02 [mouse] Error activating card.
• 2017/02/03 11:00:52 1C8EC63E r (reader) HD02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/02/03 11:00:52 1C8EC63E r (reader) HD02 [mouse] card initializing error
• 2017/02/03 11:00:52 00000000 s (main) init for all local cards done
• 2017/02/03 11:00:52 00000000 s (anticasc) anti cascading disabled
• 2017/02/03 11:00:52 37C882A0 c (client) plain dvbapi-client granted (dvbapi, au=auto (10 reader))
• 2017/02/03 11:00:52 37C882A0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2017/02/03 11:00:52 37C882A0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2017/02/03 11:01:16 37C882A0 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in caPMT
• 2017/02/03 11:01:16 37C882A0 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT
• 2017/02/03 11:01:42 37C882A0 c (dvbapi) Demuxer 0 stop descrambling program number 2B66 (FFFE@FFFFFE:2B66 unknown)
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 186D ECM_PID: 1FCD PROVID: 000000
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 found 7 ECMpids and 7 STREAMpids in caPMT
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2017/02/03 11:01:46 37C882A0 c (dvbapi) Demuxer 0 found 7 ECMpids and 7 STREAMpids in PMT
• 2017/02/03 11:01:50 37C882A0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2017/02/03 11:03:04 37C882A0 c (-) -- Skipped 14 duplicated log lines --

Spoiler

Hi

ein mal den Inhalt von oscam.version posten,
ist dein Oscam mit Usbgerätesupport compiliert ?

HF

Oscam version ist r11342

Ob meine Oscam Usbgerätesupport compiliert ist, weiss ich leider nicht. Wie kann ich das wissen?

 

[Tec-Hi]

Hi

zu finden unter Files -> oscam.version und den Inhalt
bitte und nich die Version.

HF

 

[pit63]

Hier:

Spoiler: oscam.version

Unix starttime: 1486119144
Starttime: 03.02.2017 11:52:24
Version: oscam-1.20-unstable_svn-r11342
Compiler: mipsel-newnigma2-linux-gnu
Box type: vuduo2 (generic)
PID: 330
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/
WebifPort: 8888

GBox tmp_dir: not defined using: /tmp/.oscam
value read during start up, not refreshed if changed later in webif!

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

 

[4gx35]

deaktiviere wg. übersicht die internen reader, teste orf in der mouse,

Sie müssen registriert sein, um Links zu sehen.

 

[pit63]

deaktiviere wg. übersicht die internen reader, was ist das?


Habe anderen versionen von oscam schon probiert, die 11350 freezt.....

Die beste fuer mich nachdem ich 4 oder 5 probiert habe ist die jetzige.

 

[Tec-Hi]

Hi

teste mal

Sie müssen registriert sein, um Links zu sehen.

,
die hat Usbsupport

HF

 

[pit63]

Hat meine keinen usb support?

Denn alles neu installieren , da brauche ich wieder einen ganzen tag.

Welchen reader muss ich eingeben fuer die letzte ORF karte ORF_CRYPTOWORKS_0D98

 

[webman2]

ORF ICE (CW Mode)
Code:
[reader]
label = orf
protocol = mouse
device = /dev/ttyUSB0
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2

 

[4gx35]

es ist extrem unwahrscheinlich, dass eine oscam version freezt und eine andere nicht,
liegt fast immer an den einstellungen.
im oscam webif unter readers vorn aufs symbol klicken > aktiv/deaktiv
damit man im log nicht immer alle laufenden internen reader hat, also übersichtlicher

 

[pit63]

Mit orf invalid caid

Aber wenigstents weiss ich nun, dass die smartemouse nicht defekt ist