Gbox...Beginner

[sodex]

@70sailor ,
in die Datei "cwshare.cfg" im Ordner "usr/keys" folgende Zeilen einfügen
Box 1 ( mit z.B. der IP - 192.168.178.20 ) :

M: { 192.168.178.20 { AB333441 }}
D: { 192.168.178.21 { 8010 8010 { CC334B24 { 5 5 }}}}

Box 2 ( mit z.B. der IP - 192.168.178.21 ) :

M: { 192.168.178.21 { CC334B24 }}
D: { 192.168.178.20 { 8010 8010 { AB333441 { 5 5 }}}}

MfG

 

[navajo2]

In den neueren gboxen sind die Keys nicht drin für die HD+ Karten die muß man selber einfügen. In die älteren ist er drin aber damit laufen dann die Sky Karten nicht.

 

[ghost0815]

Er will ja nicht Sky sharen, nur HD+ und ORF.....

 

[70sailor]

Danke, aber oscam bleibt bei beiden dunkel, keine ahnung wieso auch ccam 2.3.2 geht nicht. Also am Vu+ Ultimo4k

@70sailor ,
in die Datei "cwshare.cfg" im Ordner "usr/keys" folgende Zeilen einfügen
Box 1 ( mit z.B. der IP - 192.168.178.20 ) :

M: { 192.168.178.20 { AB333441 }}
D: { 192.168.178.21 { 8010 8010 { CC334B24 { 5 5 }}}}

Box 2 ( mit z.B. der IP - 192.168.178.21 ) :

M: { 192.168.178.21 { CC334B24 }}
D: { 192.168.178.20 { 8010 8010 { AB333441 { 5 5 }}}}

MfG

Die UDP Port sind 8010? immer oder nur zufällig?
und was bedeuten die Hexzahlen in Klammer? Wo bekomme ich da die richtigen her?

Dankeschön!

 

[sodex]

und was bedeuten die Hexzahlen in Klammer?

das hat nichts mit Hexzahlen zu tun ! da muss ein 8 Stelliges Passwort rein , was du frei mit Buchstaben A-F und Zahlen 1-9 wählen kannst
MfG

 

[70sailor]

{ CC334B24 } AB333441 }} sollten dann die 2 passwörter nicht gleich sein? und sind die absolut frei wählbar?

danke
gbox.net 2.2A/Linux@ARM ( Mar 2 2016, 20:44:30 ) git811.K
mode 03
AU:03/update:01/Keyfile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
enx_conf = 0 ; reset on zap=2
trying to get online, please wait ...
My IP 000.000.000.000 ID 8E72 (mydbox2.homeip.net) pass AA242456, we are offline
IP 192.168.0.39 Port 8020-8020 ID 9F72 pass AB333441 sharelevel 5/5 (192.168.0.39)
IP 192.168.0.92 Port 8020-8020 ID F117 pass BA334B24 sharelevel 5/5 (192.168.0.92)
Total 1 ports to monitor
monitoring port: 8020
CPU ARM
using LinuxTV api3
Couldn't open /dev/sci0: Device or resource busy
Couldn't open /dev/sci1: Device or resource busy
error lb bind
: Address already in use
mode: any pid
entering main loop

so schaut mein dilemma im moment aus

 

[sodex]

übernimm doch einfach die 2 Zeilen wie bei #136 gezeigt pro Box in die "cwshare.cfg" und ersetze nur die IP's mit denen die deine Boxen haben - fertig - beide Boxen neu starten nicht vergessen
MfG

 

[70sailor]

Box 1

Spoiler

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 12 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# für externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# für externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1
M: { 192.168.0.96{ AB333441 }}
D: { 192.168.0.39 { 8010 8010 { CC334B24 { 5 5 }}}}

Spoiler

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 12 } 192.168.1.2 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# für externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# für externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1
M: { 192.168.0.39 { CC334B24 }}
D: { 192.168.0.96 { 8010 8010 { AB333441 { 5 5 }}}}

sorry noch immer dunkel

danke

 

[sodex]

wie solls auch hell werden, wenn du die M und D Line in die "gbox.cfg" schreibst ! die kommen in die "cwshare.cfg"
schau dir mal den Spoiler bei #133 an
wenn 192.168.0.96 die IP deiner Box1 ist und die 192.168.0.39 deiner Box2 ist dann schieb die "cwshare.cfg" im Anhang für Box1 und Box2 je nach in das Verzeichnis "usr/keys" und setze die Rechte auf 644

MfG

 

[pehedima]

@70sailor
Nutze bitte die Spoilerfunktion (verbirgt sich hinter den "drei Punkten" oben in der Menüzeile), wenn du Configs oder Logfiles postest und den 'Bearbeiten' Button unten links, um an deinen vorherigen Beiträgen etwas anzufügen. Das ist immer dann sinnvoll, wenn dein Beitrag als letztes auftaucht. Danke.

 

[70sailor]

ok danke

 

[pehedima]

... und noch zwei Hinweise

Bitte keine Vollzitate von Beiträgen, die direkt über deinen stehen und zum reinen Bedanken immer nur den 'Gefällt mir' button unten rechts nutzen.
Wir kriegen das schon hin

 

[70sailor]

OK VERSUCHE ES NOCHMAL
BIN SCHON LEICHT AM VERZWEIFELN

Spoiler: CONFIG BOX1

# allow maximum 06 share level for recieved card data
I: { 03 }

# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 00 20 00 2500 4500 }

# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }

# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
# G: { 17020000 1234 }
# G: { 0B000000 ABCD }
# G: { 05021510 AB34 }
# G: { 0D03A000 A234 }

# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
#M: { mydbox2.homeip.net { AA242456 }}

#
# Internet Friends rx tx password cod
#D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

#
# other local boxes
#D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
#D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}


#OScam lokal
M: { 192.168.0.96 {76543210 }}
D: { 192.168.0.39 { 8010 8010 { 76543210 { 5 5 }}}}

WEIL JETZT GEHT WIEDER MAL GAR NIX

 

[dewildschwein500]

hi @70sailor,
.. das wird schon ... damit das Helfen einfach fällt, wäre es hilfreich, wenn du nur die relevanten Einstellungen posten würdest. Alle Zeilen, die mit # beginnen sind auskommentiert und werden nicht angewendet. Wenn du auf der Konsole unterwegs bist, dann kannst du dir die Kommentarzeilen rausfiltern lassen und noch die relevanten Einstellungen hier posten.
Teste mal grep ^[^#] cwshare.cfg
So werden aus über 50 Zeilen nur noch 5 Zeilen, die man recht einfach überschauen kann.

 

[sodex]

M: { 192.168.0.96 {76543210 }}
D: { 192.168.0.39 { 8010 8010 { 76543210 { 5 5 }}}}

schreib ich chinesich ! Passwort mit 1-9 und A-F ! und du hast ne 0 drinne und Box1 und Box2 mit dem selben Passwort geht nicht
musst doch nur die im Anhang bei #144 nehmen
MfG