IPL: A239 C0,16153A[2016-04-13 13:39:22],J5,PG3.0,GL-S=64(0),RAM=128,RST=9
CLK: 720/600/400 MHz (ARM/DSP/DDR)
IOC: 4e33427e 7e7e7e7e 7e7e414e 7e7e7e00
BREAK detected - press any key to stop the ipl within 5000ms! => BREAK accepted! 0
Entering CLI [?], type '?' for help
=> boot -t emerg
fb2:ARM=8020000/2
*** WARNING: Enabling DSP access to the entire RAM!
ipl done
Startup: PL_qnx_startup-jacinto5-v7_Dev_MibJ5_13372A, built 2013/09/10_12-21-17_UTC
Library: [DATE=2013/02/01-08:07:42-WEST USER=MHupfer HOST=oekan402]
Board: 0000a239.000000c0
Command: -vvvv -p2000 -x 0xc2700000,0x01900000 -x 0x86700000,0x01900000 -wb
========================================
IFS: ver.300003b5 (type=3)
UMEM: 08000000-0bffffff(F) 80000000-87ffffff®
ENV: @40313fa0 "IOC_BOOTMODE=N3B~~~~~~~AN~~~
IOC_BM_INFO=0x40313a8c,0x10
HW_REV=A239 C0,0x19,J5,PG3.0
LAST_RST=0x0009
"
<8003> 39 a2 c0 00
DSPLOAD DATA: 838c0400 (1024)
========================================
RAM: 128 MB
FLASH: 64 MB @0x08000000
Allocing from c2700000 for 01900000
Allocing from 86700000 for 01900000
dsp_mem_count= 00000002
delaying 2000 ms for various bugs
delaying done
in pcie_init_delay
Polling for clock
pcie clock detected after delaying for approx. 1 usec.
PCIe function could be enabled
DSP: loader c674x_ipl_T10 (May 6 2015 09:47:23), args @838c0400 (1024)
Added GPIO-callouts
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 8192x64 WB
CPU0: VFP 410330c3
CPU0: 413fc082: Cortex A8 rev 2 600MHz
Setting GPIO 0
Setting GPIO0_FAL to 00001000
Setting GPIO0_RIS to 00000004
Setting GPIO 2
Setting GPIO2_INTSET0 to 00004000
Setting GPIO2_INTSET1 to 00010000
DSP loader failed: 4294963095
IPL: A239 C0,16153A[2016-04-13 13:39:22],J5,PG3.0,GL-S=64(0),RAM=128,RST=9
CLK: 720/600/400 MHz (ARM/DSP/DDR)
IOC: 4e33427e 7e7e7e7e 7e7e414e 7e7e7e00
fb2:ARM=8020000/2
*** WARNING: Enabling DSP access to the entire RAM!
ipl done
Startup: PL_qnx_startup-jacinto5-v7_Dev_MibJ5_13372A, built 2013/09/10_12-21-17_UTC
Library: [DATE=2013/02/01-08:07:42-WEST USER=MHupfer HOST=oekan402]
Board: 0000a239.000000c0
Command: -vvvv -p2000 -x 0xc2700000,0x01900000 -x 0x86700000,0x01900000 -wb
========================================
IFS: ver.300003b5 (type=3)
UMEM: 08000000-0bffffff(F) 80000000-87ffffff®
ENV: @40313fa0 "IOC_BOOTMODE=N3B~~~~~~~AN~~~
IOC_BM_INFO=0x40313a8c,0x10
HW_REV=A239 C0,0x19,J5,PG3.0
LAST_RST=0x0009
"
<8003> 39 a2 c0 00
DSPLOAD DATA: 838c0400 (1024)
========================================
RAM: 128 MB
FLASH: 64 MB @0x08000000
Allocing from c2700000 for 01900000
Allocing from 86700000 for 01900000
dsp_mem_count= 00000002
delaying 2000 ms for various bugs
delaying done
in pcie_init_delay
Polling for clock
pcie clock detected after delaying for approx. 1 usec.
PCIe function could be enabled
DSP: loader c674x_ipl_T10 (May 6 2015 09:47:23), args @838c0400 (1024)
Added GPIO-callouts
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 8192x64 WB
CPU0: VFP 410330c3
CPU0: 413fc082: Cortex A8 rev 2 600MHz
Setting GPIO 0
Setting GPIO0_FAL to 00001000
Setting GPIO0_RIS to 00000004
Setting GPIO 2
Setting GPIO2_INTSET0 to 00004000
Setting GPIO2_INTSET1 to 00010000
DSP loader failed: 4294963095