V14 blocken - Noob Anleitung

[dia]

AW: V14 blocken - Noob Anleitung

die findest du im webinterface unter reader auf das kleine i klicken
dort links kartseriall fängt mit 00 an

 

[pehedima]

AW: V14 blocken - Noob Anleitung

Das ATR nicht unkenntlich machen.
Schaut so aus, als ob die Karten in Readern vertauscht sind.

Bitte mal tauschen und dann die neue oscam.log vom oscam Start an posten (inkl. ATR).

 

[GuruAD]

AW: V14 blocken - Noob Anleitung

ok, hier ist neuer LOG von soeben:

Spoiler

2015/06/15 10:55:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10653 (mipsel-oe-linux)
2015/06/15 10:55:38 0 s (main) System name = Linux
2015/06/15 10:55:38 0 s (main) Host name = dm800se
2015/06/15 10:55:38 0 s (main) Release = 3.2-dm800se
2015/06/15 10:55:38 0 s (main) Version = #1 SMP Wed Mar 18 09:02:47 CET 2015
2015/06/15 10:55:38 0 s (main) Machine = mips
2015/06/15 10:55:38 0 s (main) Stb model = dm800se
2015/06/15 10:55:38 0 s (main) creating pidfile /var/run/oscam.pid with pid 19398
2015/06/15 10:55:38 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/15 10:55:38 0 s (main) signal handling initialized
2015/06/15 10:55:38 0 s (config) 213 service-id's loaded in 8 ms
2015/06/15 10:55:38 0 s (config) 5 provid's loaded
2015/06/15 10:55:38 0 s (reader) s02 [internal] creating thread for device /dev/sci0
2015/06/15 10:55:38 0 s (reader) hd01 [internal] creating thread for device /dev/sci1
2015/06/15 10:55:38 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/15 10:55:38 0 s (main) waiting for local card init
2015/06/15 10:55:38 A2E548 r (reader) hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
2015/06/15 10:55:38 A2E548 r (reader) hd01 [internal] Reader sci internal, detected box type: dm800se
2015/06/15 10:55:38 A2E078 r (reader) s02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/06/15 10:55:38 A2E078 r (reader) s02 [internal] Reader sci internal, detected box type: dm800se
2015/06/15 10:55:38 77500468 h (webif) webif: decompressed 160177 bytes back into 384088 bytes
2015/06/15 10:55:38 77500468 h (webif) HTTP Server running. ip=0.0.0.0 port=7777
2015/06/15 10:55:39 A2E078 r (reader) s02 [internal] card detected
2015/06/15 10:55:39 A2E548 r (reader) hd01 [internal] card detected
2015/06/15 10:55:41 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:41 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:41 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 1/7 fs = 9
2015/06/15 10:55:42 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:42 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:42 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 2/7 fs = 8
2015/06/15 10:55:42 A2E078 r (reader) s02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2015/06/15 10:55:42 A2E078 r (reader) s02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/06/15 10:55:42 A2E078 r (reader) s02 [internal] Calculated work ETU is 103.33 us reader mhz = 540
2015/06/15 10:55:42 A2E078 r (reader) s02 [internal] Buffers readed 0 bytes total time_us 75187
2015/06/15 10:55:43 A2E078 r (reader) s02 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/06/15 10:55:43 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:43 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:43 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 3/7 fs = 7
2015/06/15 10:55:44 A2E078 r (reader) s02 [internal] detect irdeto tunneled nagra card
2015/06/15 10:55:44 A2E078 r (reader) s02 [internal] no rsa key configured -> using irdeto mode
2015/06/15 10:55:44 A2E078 r (reader) s02 [internal] detect irdeto card
2015/06/15 10:55:44 A2E078 r (reader) s02 [internal] caid: 1702, acs: 3.84, country code: GER
2015/06/15 10:55:44 A2E078 r (reader) s02 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2015/06/15 10:55:45 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:45 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:45 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 4/7 fs = 6
2015/06/15 10:55:46 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:46 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:46 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 5/7 fs = 5
2015/06/15 10:55:47 A2E078 r (reader) s02 [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2015/06/15 10:55:47 A2E078 r (reader) s02 [internal] active providers: 2 (000000,000000)
2015/06/15 10:55:47 A2E078 r (reader) s02 [internal] found card system irdeto
2015/06/15 10:55:47 A2E078 r (reader) s02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/15 10:55:47 A2E548 r (reader) hd01 [internal] ERROR: no characters found in ATR!
2015/06/15 10:55:47 A2E548 r (reader) hd01 [internal] Deactivating card
2015/06/15 10:55:47 A2E548 r (reader) hd01 [internal] Read ATR fail, attempt 6/7 fs = 4
2015/06/15 10:55:47 A2E078 r (reader) s02 [irdeto] entitlements for provider: 2, id: 000000
2015/06/15 10:55:47 A2E078 r (reader) s02 [irdeto] chid: 05E7, date: 2014/02/10 - 2014/10/22

 

[Pnaler]

AW: V14 blocken - Noob Anleitung

Probiere mal die Karten zu tauschen in den slots,natürlich auch das device in der oscam.server ändern für hd01 dann device: /dev/sci0 und für die S02 dann device: /dev/sci1 um eine fehlfunktion des readers auszuschliessen

 

[GuruAD]

AW: V14 blocken - Noob Anleitung

Habe ich versucht. Läuft nicht. Aber mit Cccam funktionierts. Daher die Karten sind noch iO.
Mit dieser config habe ich es versucht:

Spoiler

[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
boxid = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541X1BF3B3ECC9AD6661B753 DCC3A962X168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,1,2

[reader]
label = s02
protocol = internal
device = /dev/sci1
services = sky_s02
caid = 1702
boxkey = 1122334455667788
ecmwhitelist = 92
detect = cd
mhz = 540
cardmhz = 2700
group = 2
emmcache = 1,3,2,0

 

[dia]

AW: V14 blocken - Noob Anleitung

hmm hier ist v14 nicht s02

 

[pehedima]

AW: V14 blocken - Noob Anleitung

dein Logfile ist zu kurz.

Die S02-Karte schein gelesen zu werden.
Bei deiner HD01-Karte wird nicht mal das ATR ausgelesen. Die sollte nicht laufen.

Ändere mal im HD01 reader die Frequenz.

mhz = 357

auch mal mit:

mhz = 368

versuchen. Evtl. kann auch das abschalten des autospeeds (autospeed = 0 ) im Reader helfen.

Bitte dann ein neues vollständiges Logfile vom oscam start bis mind. (card ready for requests) posten.

 

[Pnaler]

AW: V14 blocken - Noob Anleitung

in deiner user datei die du gepostet hast (post#78),hat der user nur zugriff auf reader 1,du hast aber 2 reader

ausserdem stimmt jetzt der eintrag bei der S02 ecmwhitelist nicht mehr,der eintrag gehört zur hd01, für S02 karte müste da 93 hin oder ganz weglassen

@Dia

dann ist es wohl der falsche thread hier für ihn,aber geht um die S02 und HD01 nach update der oscam

 

[GuruAD]

AW: V14 blocken - Noob Anleitung

OK, ich habe wieder diese config.server aufgespielt:

Spoiler

[reader]
label = s02
enable = 1
protocol = internal
device = /dev/sci0
services = sky_s02
caid = 1702
boxid = 1122334455667788
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,1,2

[reader]
label = hd01
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541X1BF3B3ECC9AD6661B753 DCC3A962X168EF09E4D9C5CCA4DD5
ecmwhitelist = 92
detect = cd
mhz = 357
cardmhz = 2700
autospeed = 0
group = 1
emmcache = 1,3,2,0

- S02 oben, HD01 unten.
- Gruppe auf 1 geändert
- Autospeed bei S02 auf 1 bei HD01 auf 0

Hier ist die Log (hoffe lang genug):

Spoiler

2015/06/15 12:37:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10653 (mipsel-oe-linux)
2015/06/15 12:37:13 0 s (main) System name = Linux
2015/06/15 12:37:13 0 s (main) Host name = dm800se
2015/06/15 12:37:13 0 s (main) Release = 3.2-dm800se
2015/06/15 12:37:13 0 s (main) Version = #1 SMP Wed Mar 18 09:02:47 CET 2015
2015/06/15 12:37:13 0 s (main) Machine = mips
2015/06/15 12:37:13 0 s (main) Stb model = dm800se
2015/06/15 12:37:13 0 s (main) creating pidfile /var/run/oscam.pid with pid 8178
2015/06/15 12:37:13 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/06/15 12:37:13 0 s (main) signal handling initialized
2015/06/15 12:37:13 0 s (config) 213 service-id's loaded in 6 ms
2015/06/15 12:37:13 0 s (config) 5 provid's loaded
2015/06/15 12:37:13 0 s (reader) s02 [internal] creating thread for device /dev/sci0
2015/06/15 12:37:13 0 s (reader) hd01 [internal] creating thread for device /dev/sci1
2015/06/15 12:37:13 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/15 12:37:13 0 s (main) waiting for local card init
2015/06/15 12:37:13 77100BB0 r (reader) hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2015/06/15 12:37:13 77100BB0 r (reader) hd01 [internal] Reader sci internal, detected box type: dm800se
2015/06/15 12:37:13 77100588 r (reader) s02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/06/15 12:37:13 77100588 r (reader) s02 [internal] Reader sci internal, detected box type: dm800se
2015/06/15 12:37:13 57A078 h (webif) webif: decompressed 160177 bytes back into 384088 bytes
2015/06/15 12:37:13 57A078 h (webif) HTTP Server running. ip=0.0.0.0 port=7777
2015/06/15 12:37:14 77100588 r (reader) s02 [internal] card detected
2015/06/15 12:37:14 77100BB0 r (reader) hd01 [internal] card detected
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75202
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/06/15 12:37:16 77100BB0 r (reader) hd01 [internal] Card responded ok for ifsd request of 251
2015/06/15 12:37:17 77100588 r (reader) s02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2015/06/15 12:37:17 77100588 r (reader) s02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/06/15 12:37:17 77100588 r (reader) s02 [internal] Calculated work ETU is 103.33 us reader mhz = 540
2015/06/15 12:37:17 77100588 r (reader) s02 [internal] Buffers readed 0 bytes total time_us 75184
2015/06/15 12:37:17 77100BB0 r (reader) hd01 [internal] detect native nagra card
2015/06/15 12:37:18 77100588 r (reader) s02 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/06/15 12:37:18 77100BB0 r (reader) hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/06/15 12:37:18 77100BB0 r (reader) hd01 [internal] card system not supported
2015/06/15 12:37:18 77100BB0 r (reader) hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/06/15 12:37:19 77100588 r (reader) s02 [internal] detect irdeto tunneled nagra card
2015/06/15 12:37:19 77100588 r (reader) s02 [internal] no rsa key configured -> using irdeto mode
2015/06/15 12:37:19 77100588 r (reader) s02 [internal] detect irdeto card
2015/06/15 12:37:19 77100588 r (reader) s02 [internal] caid: 1702, acs: 3.84, country code: GER
2015/06/15 12:37:19 77100588 r (reader) s02 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2015/06/15 12:37:20 77100BB0 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/15 12:37:20 77100BB0 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/15 12:37:20 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 110.39 us reader mhz = 337
2015/06/15 12:37:20 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75191
2015/06/15 12:37:20 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/06/15 12:37:22 77100588 r (reader) s02 [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2015/06/15 12:37:22 77100588 r (reader) s02 [internal] active providers: 2 (000000,000000)
2015/06/15 12:37:22 77100588 r (reader) s02 [internal] found card system irdeto
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/15 12:37:22 77100BB0 r (reader) hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] entitlements for provider: 2, id: 000000
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05E7, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05E8, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 04CE, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05F2, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05F5, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05DE, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05F4, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 0605, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 00F0, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05FB, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05DF, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05DD, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 7D23, date: 2014/03/31 - 2014/12/10
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 7D27, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 0617, date: 2014/03/31 - 2014/12/10
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05F1, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05FC, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 000F, date: 2014/03/31 - 2014/12/10
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 05F6, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:22 77100588 r (reader) s02 [irdeto] chid: 0276, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0606, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0609, date: 2014/02/10 - 2014/10/22
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0103, date: 2008/10/02 - 2008/10/18
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0104, date: 2008/10/02 - 2008/10/18
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0105, date: 2008/10/02 - 2008/10/18
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2015/06/15 12:37:23 77100588 r (reader) s02 [irdeto] ready for requests
2015/06/15 12:37:23 77100BB0 r (reader) hd01 [internal] detect native nagra card
2015/06/15 12:37:25 77100BB0 r (reader) hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/06/15 12:37:27 77100BB0 r (reader) hd01 [internal] T1 Resync command error, trying to reactivate!
2015/06/15 12:37:28 77100BB0 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/15 12:37:28 77100BB0 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/15 12:37:28 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2015/06/15 12:37:28 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75180
2015/06/15 12:37:29 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/06/15 12:37:29 77100BB0 r (reader) hd01 [internal] Card responded ok for ifsd request of 251
2015/06/15 12:37:30 77100BB0 r (reader) hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/06/15 12:37:30 77100BB0 r (reader) hd01 [internal] card system not supported
2015/06/15 12:37:30 77100BB0 r (reader) hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/06/15 12:37:30 77100BB0 r (reader) hd01 [internal] card initializing error
2015/06/15 12:37:30 0 s (main) init for all local cards done
2015/06/15 12:37:30 0 s (anticasc) anti cascading disabled
2015/06/15 12:37:30 77101438 c (client) plain dvbapi-client granted (DVBApi, au=auto (2 reader))
2015/06/15 12:37:30 77101438 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2015/06/15 12:37:30 77101438 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

Seht ihr den Fehler?

 

[pehedima]

AW: V14 blocken - Noob Anleitung

Da scheint der rsakey nicht zu stimmen.

Der darf keine Leerzeichen enthalten.
Bitte prüfen und ggfs. ändern.

 

[Pnaler]

AW: V14 blocken - Noob Anleitung

hast du auch dem user zugriff auf beide reader gegeben

 

[pehedima]

AW: V14 blocken - Noob Anleitung

@Pnaler:
Die Karte HD01 wird erstmal gar nicht gelesen.
Das muss erstmal laufen, damit überhaupt ein User Zugriff bekommen kann.

 

[dan0ne]

AW: V14 blocken - Noob Anleitung

Das übernimmt Oscam für dich,
richte dich nur nach den configs hier im board und dabei sind diese Zeilen die wichtigsten im Reader:

blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

dann erstellt Oscam eine Datei dessen Inhalt dann die geloggten EMM sind.
Diese leicht modifiziert (so wie in den ganzen Anleitungen hier beschrieben) entweder posten oder vergleichen mit denen im Sammelthread.

Kannst du sicher gehen wie, freak, der entweder paar bytes hin und her gerechnet hat / bzw auch nur verglichen hat mit denen im Sammelthread, dann weiß man welche geschrieben werden dürfen.

Bei mir zb. kammen nur zwei verschiedene EMM's immer mit 4C und 33 Inhalt aber auch nix anderes. Das ist fast schon ein eindeutiges Indiz dafür "Aktivierer und Verlängerer"

Um sie dann zu schreiben, bin ich im Webinterface auf -> Reader gegangen da gibts dann bei dem V14 Reader einen Button "Write EMM to: XXX" (ist n Pfeil nach unten) da tauchen dann auch nochmal die geloggten EMM auf. Diese kann man bei neueren Oscam Versionen einfach anklicken und werden in das Launch Feld automatisch rein kopiert.

Dann nur noch auf Launch klicken und das hexenwerk ist vollbracht

...wirst sehen hört sich teilweise komplizierter an, als es eig ist

LG dan0ne

 

[GuruAD]

AW: V14 blocken - Noob Anleitung

Was mich angeht, danke erst mal allen für die Hilfe.
Meine S02 (Gott segne sie) und die HD01 laufen jetzt auch mit Oscam. So, die V14 kann jetzt kommen.
Aber die Frage von Killah78 teile ich auch ...

 

[Rohrby]

AW: V14 blocken - Noob Anleitung

Wenn sali die letzten 10 Stellen von einem EMM hat sucht er in seiner Datenbank nach den 10 Stellen. Findet dadurch das komplette EMM in dem natürlich die Seriennummer noch drin ist und kann sich dann mit der Seriennummer alles aus seiner Datenbank raus suchen was zu dieser Karte gehört