Reparatur Pogo E02 mittels Raspi als Jtag

[axel]

Hi,

tty antwortet nicht, das ist die Hauptkonsole quasi.

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[joerg_999]

wenn du nuggelbeb meinst sein Pogo läuft schon habe ihn per Teamviewer hingebogen.....

 

[axel]

Hi,

ich will hier nicht rumärgern etc.

Das Teil hat lange die besten Jahre gesehen, lohnt nicht mehr der Mühe.

Ansonsten:

Poste mal folgende Ausgabe:

dmesg && cat /var/log/syslog

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[joerg_999]

bitte sehr:

Spoiler: dmesg

root@debian:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.11.3-kirkwood-tld-2 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Tue Jun 6 17:01:17 PDT 2017
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: CloudEngines Pogoplug E02
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c0dabbc8, node_mem_map cfdf9000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi)
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 239740K/262144K available (8192K kernel code, 786K rwdata, 2016K rodata, 1024K init, 280K bss, 22404K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0900000   (9184 kB)
      .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
      .data : 0xc0d00000 - 0xc0dc49b4   ( 787 kB)
       .bss : 0xc0dc49b4 - 0xc0e0acc8   ( 281 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000492] Console: colour dummy device 80x30
[    0.000527] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[    0.090112] pid_max: default: 32768 minimum: 301
[    0.090316] Security Framework initialized
[    0.090439] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091336] CPU: Testing write buffer coherency: ok
[    0.092369] Setting up static identity map for 0x100000 - 0x100058
[    0.092628] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096331] devtmpfs: initialized
[    0.100623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.100651] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.100980] prandom: seed boundary self test passed
[    0.104737] prandom: 100 self tests passed
[    0.104749] pinctrl core: initialized pinctrl subsystem
[    0.105946] NET: Registered protocol family 16
[    0.106414] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.108023] cpuidle: using governor ladder
[    0.108095] cpuidle: using governor menu
[    0.108521] Feroceon L2: Enabling L2
[    0.108567] Feroceon L2: Cache support initialised.
[    0.108935] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.113578] No ATAGs?
[    0.122662] vgaarb: loaded
[    0.122978] SCSI subsystem initialized
[    0.123167] libata version 3.00 loaded.
[    0.123458] usbcore: registered new interface driver usbfs
[    0.123535] usbcore: registered new interface driver hub
[    0.123618] usbcore: registered new device driver usb
[    0.124690] clocksource: Switched to clocksource orion_clocksource
[    0.213311] VFS: Disk quotas dquot_6.6.0
[    0.213395] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.224063] NET: Registered protocol family 2
[    0.224874] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.224914] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.224945] TCP: Hash tables configured (established 2048 bind 2048)
[    0.225032] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.225056] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.225226] NET: Registered protocol family 1
[    0.225655] RPC: Registered named UNIX socket transport module.
[    0.225668] RPC: Registered udp transport module.
[    0.225676] RPC: Registered tcp transport module.
[    0.225683] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.225696] PCI: CLS 0 bytes, default 32
[    0.225975] Unpacking initramfs...
[    0.845407] Freeing initrd memory: 6676K
[    0.845550] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.846520] audit: initializing netlink subsys (disabled)
[    0.847004] Initialise system trusted keyrings
[    0.847136] audit: type=2000 audit(0.840:1): state=initialized audit_enabled=0 res=1
[    0.847212] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    0.847303] zbud: loaded
[    0.848265] NFS: Registering the id_resolver key type
[    0.848293] Key type id_resolver registered
[    0.848302] Key type id_legacy registered
[    0.848320] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.848330] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.848802] Key type cifs.spnego registered
[    0.848826] Key type cifs.idmap registered
[    0.848839] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.849103] fuse init (API version 7.26)
[    0.849489] orangefs_debugfs_init: called with debug mask: :none: :0:
[    0.849756] orangefs_init: module version upstream loaded
[    0.849768] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.554698] random: fast init done
[    4.967794] Key type asymmetric registered
[    4.967811] Asymmetric key parser 'x509' registered
[    4.967882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.967895] io scheduler noop registered
[    4.967903] io scheduler deadline registered
[    4.967983] io scheduler cfq registered (default)
[    4.969272] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    4.971118] mv_xor f1060800.xor: Marvell shared XOR driver
[    5.025453] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    5.025675] mv_xor f1060900.xor: Marvell shared XOR driver
[    5.085433] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    5.085864] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.087100] console [ttyS0] disabled
[    5.087166] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
[    5.686389] console [ttyS0] enabled
[    5.698513] loop: module loaded
[    5.702833] nand: Could not find valid ONFI parameter page; aborting
[    5.709345] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    5.715761] nand: Hynix NAND 128MiB 3,3V 8-bit
[    5.720230] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    5.727869] Scanning device for bad blocks
[    5.746952] Bad eraseblock 140 at 0x000001180000
[    5.793447] Bad eraseblock 534 at 0x0000042c0000
[    5.850135] 2 cmdlinepart partitions found on MTD device orion_nand
[    5.856447] Creating 2 MTD partitions on "orion_nand":
[    5.861611] 0x000000000000-0x000000100000 : "u-boot"
[    5.867802] 0x000000100000-0x000008000000 : "ubi"
[    5.875491] libphy: Fixed MDIO Bus: probed
[    5.880509] libphy: orion_mdio_bus: probed
[    5.889738] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    6.995373] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:04:90:df
[    7.004235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.010843] ehci-pci: EHCI PCI platform driver
[    7.015388] ehci-orion: EHCI orion driver
[    7.019599] orion-ehci f1050000.ehci: EHCI Host Controller
[    7.025165] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    7.033016] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[    7.064724] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    7.071011] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.077860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.085139] usb usb1: Product: EHCI Host Controller
[    7.090038] usb usb1: Manufacturer: Linux 4.11.3-kirkwood-tld-2 ehci_hcd
[    7.096789] usb usb1: SerialNumber: f1050000.ehci
[    7.102214] hub 1-0:1.0: USB hub found
[    7.106083] hub 1-0:1.0: 1 port detected
[    7.110915] mousedev: PS/2 mouse device common for all mice
[    7.464725] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    7.656402] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    7.663148] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.670355] usb 1-1: Product: USB2.0 Hub
[    7.675235] hub 1-1:1.0: USB hub found
[    7.679402] hub 1-1:1.0: 4 ports detected
[    8.004728] usb 1-1.4: new high-speed USB device number 3 using orion-ehci
[    8.155899] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5583
[    8.162821] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.170214] rtc-mv f1010300.rtc: internal RTC not ticking
[    8.170398] i2c /dev entries driver
[    8.171869] hidraw: raw HID events driver (C) Jiri Kosina
[    8.172192] drop_monitor: Initializing network drop monitor service
[    8.172433] NET: Registered protocol family 17
[    8.172611] Key type dns_resolver registered
[    8.173329] registered taskstats version 1
[    8.173336] Loading compiled-in X.509 certificates
[    8.173391] zswap: loaded using pool lzo/zbud
[    8.198544] Key type big_key registered
[    8.228089] Key type encrypted registered
[    8.246310] usb 1-1.4: Product: Ultra Fit
[    8.250338] usb 1-1.4: Manufacturer: SanDisk
[    8.254628] usb 1-1.4: SerialNumber: 4C530001320908104320
[    8.260827] hctosys: unable to open rtc device (rtc0)
[    8.266524] PM: Hibernation image not present or could not be loaded.
[    8.269731] Freeing unused kernel memory: 1024K
[    8.346748] systemd-udevd[112]: starting version 215
[    8.511101] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    8.577260] scsi host0: usb-storage 1-1.4:1.0
[    8.588530] usbcore: registered new interface driver usb-storage
[    8.615941] usbcore: registered new interface driver uas
[    9.605875] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    9.621593] sd 0:0:0:0: [sda] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[    9.632448] sd 0:0:0:0: [sda] Write Protect is off
[    9.637368] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.638058] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    9.654864]  sda: sda1
[    9.660810] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.670191] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.925863] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   23.943770] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   25.293571] systemd-udevd[310]: starting version 215
[   25.796124] orion_wdt: Initial timeout 21 sec
[   25.910669] marvell-cesa f1030000.crypto: CESA device successfully registered
[   26.817826] EXT4-fs (sda1): re-mounted. Opts: (null)
[   27.007873] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   28.422077] random: crng init done
[   29.711320] NET: Registered protocol family 10
[   29.716976] Segment Routing with IPv6
[   30.908281] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.354009] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   33.363937] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@debian:~#

 

[axel]

Hi,

danke vielmals!

Wenn Du lesen kannst steht das da sogar plain!

Du solltest Deinen Stick etc. tauschen.

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[joerg_999]

Wenn Du lesen kannst steht das da sogar plain!

Du solltest Deinen Stick etc. tauschen.

Weis zwar nicht wo du das raus liest der dmesg war von einem/meinem funktionierenden Pogo der perfekt läuft.
Die beiden bad erase Blocks sind im nand und mir egal da sie über "0x00100000" liegen und sie beim flashen übersprungen werden
also wo siehst du da einen Fehler?

 

[axel]

Hi,

genau das meinte ich.

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

 

[test65]

Würde die Anleitung gerne für eine Zyxel NSA325 nutzen.
Installation und Einstellungen für den Pi + funktionieren, aber von den nötigen Anpassungen in der pogo.cfg hab ich keine Ahnung

Spoiler: Test

pi@raspberrypi:~ $ sudo openocd -f pogo.cfg
Open On-Chip Debugger 0.10.0+dev-01281-gf0909fe9-dirty (2020-06-12-12:02)
Licensed under GNU GPL v2
For bug reports, read

Sie müssen registriert sein, um Links zu sehen.

Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
Warn : use 'feroceon.cpu' as target identifier, not '0'
pogo_load_uboot
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : BCM2835 GPIO JTAG/SWD bitbang driver
Info : JTAG and SWD modes enabled
Info : clock speed 2030 kHz
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9 (Marvell Semiconductors), part: 0x0a02, ver: 0x2)
Info : Embedded ICE version 0
Info : feroceon.cpu: hardware has 1 breakpoint/watchpoint unit
Info : starting gdb server for feroceon.cpu on 3333
Info : Listening on port 3333 for gdb connections

> nand list
#0: NAND 128MiB 3.3V 8-bit (unknown) pagesize: 2048, buswidth: 8,
blocksize: 131072, blocks: 1024

Würde das so funktionieren

Spoiler: nsa

# Pogoplug E02
# modification joerg_999 14.03.2016
# use this pogo.cfg taken from sheevaplug to use with Raspi direct or Buspirate jtag adapter
# use raspberrypi-native mode
# we use the Pins from SPI Interface (violett) 19,21,23,26 and 22, + 20 for GND
# see GPIO schematic Raspi Raspi GPIO

# source [find interface/buspirate.cfg]
# source [find interface/sysfsgpio-raspberrypi.cfg]
source [find interface/raspberrypi123-native.cfg]
source [find target/feroceon.cfg]

$_TARGETNAME configure \
-work-area-phys 0x100000 \
-work-area-size 65536 \
-work-area-backup 0
#arm7_9 dcc_downloads enable
# this assumes the hardware default peripherals location before u-Boot moves it
set _FLASHNAME $_CHIPNAME.flash
nand device $_FLASHNAME orion 0 0xd8000000
proc pogo_init { } {
# We need to assert DBGRQ while holding nSRST down.
# However DBGACK will be set only when nSRST is released.
# Furthermore, the JTAG interface doesn't respond at all when
# the CPU is in the WFI (wait for interrupts) state, so it is
# possible that initial tap examination failed. So let's
# re-examine the target again here when nSRST is asserted which
# should then succeed.
jtag_reset 0 1
feroceon.cpu arp_examine
halt 0
jtag_reset 0 0
wait_halt
arm mcr 15 0 0 1 0 0x00052078
# angepasst auf NSA325
mww 0xD0001400 0x4301503E ;# DDR SDRAM Configuration Register
mww 0xD0001404 0xB9843000 ;# Dunit Control Low Register
mww 0xD0001408 0x33137777 ;# DDR SDRAM Timing (Low) Register
mww 0xD000140C 0x16000C55 ;# DDR SDRAM Timing (High) Register
mww 0xD0001410 0x04000000 ;# DDR SDRAM Address Control Register
mww 0xD0001414 0x00000000 ;# DDR SDRAM Open Pages Control Register
mww 0xD0001418 0x00000000 ;# DDR SDRAM Operation Register
mww 0xD000141C 0x00000672 ;# DDR SDRAM Mode Register
mww 0xD0001420 0x00000004 ;# DDR SDRAM Extended Mode Register
mww 0xD0001424 0x0000F14F ;# Dunit Control High Register
mww 0xD0001428 0x000D6720 ;# Dunit Control High Register
mww 0xD000147c 0x0000B571 ;# Dunit Control High Register
mww 0xD0001504 0x1FFFFFF1 ;# CS0n Size Register
mww 0xD0001508 0x20000000 ;# CS1n Base Register
mww 0xD000150C 0x1FFFFFF4 ;# CS1n Size Register
mww 0xD0001514 0x00000000 ;# CS2n Size Register
mww 0xD000151C 0x00000000 ;# CS3n Size Register
mww 0xD0001494 0x00120000 ;# DDR2 SDRAM ODT Control (Low) Register
mww 0xD0001498 0x00000000 ;# DDR2 SDRAM ODT Control (High) REgister
mww 0xD000149C 0x0000E803 ;# DDR2 Dunit ODT Control Register
# angepasst auf NSA325
#
# angepasst auf NSA325 unklar
mww 0xD015D0 0x00000630
mww 0xD015D4 0x00000046
mww 0xD015D8 0x00000008
mww 0xD015DC 0x00000000
mww 0xD015E0 0x00000023
mww 0xD015E4 0x00203C18
mww 0xD01620 0x00384800
mww 0xD01480 0x00000001
mww 0xD20134 0x66666666
mww 0xD20138 0x00066666

mww 0xD10100 0x00004000
mww 0xD10104 0xFFFFBFFF

# angepasst auf NSA325 unklar
#
mww 0xD0001480 0x00000001 ;# DDR SDRAM Initialization Control Register
mww 0xD0020204 0x00000000 ;# Main IRQ Interrupt Mask Register
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0020204 0x00000000 ;# "
mww 0xD0010000 0x01111111 ;# MPP 0 to 7
mww 0xD0010004 0x11113322 ;# MPP 8 to 15
mww 0xD0010008 0x00001111 ;# MPP 16 to 23
mww 0xD0010418 0x003E07CF ;# NAND Read Parameters REgister
mww 0xD001041C 0x000F0F0F ;# NAND Write Parameters Register
mww 0xD0010470 0x01C7D943 ;# NAND Flash Control Register
}
proc pogo_reflash_uboot { } {
# reflash the u-Boot binary and reboot into it
pogo_init
nand probe 0
nand erase 0 0x0 0xa0000
nand write 0 uboot.kwb 0 oob_softecc_kw
resume
}
proc pogo_reflash_uboot_env { } {
# reflash the u-Boot environment variables area
pogo_init
nand probe 0
nand erase 0 0xc0000 0x20000
nand write 0 uboot-env.bin 0xc0000 oob_softecc_kw
resume
}
proc pogo_load_uboot { } {
# load u-Boot into RAM and execute it
pogo_init
load_image uboot.kwb
verify_image uboot.kwb
resume 0x800200
}

 

[joerg_999]

Möglicherweise reicht hier ein TTL-USB Adapter für die Reparatur siehe Beitrag hier:

Sie müssen registriert sein, um Links zu sehen.

sonst bräuchtest du die passenden Startcodes für dein NAS, Quell: uboot Entwicklung

 

[test65]

Mein Problem ist das weder USB- noch SATA-Geräte erkannt werden.
Die Adressen habe ich schon teilweise angepasst.
Ab da ist es für mich unmöglich

ODT Control Register
# angepasst auf NSA325
#
# angepasst auf NSA325 unklar
mww 0xD015D0 0x00000630