Risolto Raspberry pi + easymouse 2

[    0.000000]   Normal zone: 125984 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                           es: 125984
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 b                           cm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0xbae37c6f smsc95xx.m                           acaddr=B8:27:EB:E3:7C:6F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base                           =0x1f000000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115                           200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootw                           ait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 496MB = 496MB total
[    0.000000] Memory: 497640k/497640k available, 10264k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xe8000000   ( 136 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04c0e78   (4836 kB)
[    0.000000]       .init : 0xc04c1000 - 0xc04e0b10   ( 127 kB)
[    0.000000]       .data : 0xc04e2000 - 0xc050e1c0   ( 177 kB)
[    0.000000]        .bss : 0xc050e1e4 - 0xc05b5128   ( 668 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4                           294967ms
[    0.000000] timer_set_mode: unhandled mode:1
[    0.000000] timer_set_mode: unhandled mode:3
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000942] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060150] pid_max: default: 32768 minimum: 301
[    0.060631] Mount-cache hash table entries: 512
[    0.061127] Initializing cgroup subsys cpuacct
[    0.061217] Initializing cgroup subsys devices
[    0.061254] Initializing cgroup subsys freezer
[    0.061285] Initializing cgroup subsys blkio
[    0.061427] CPU: Testing write buffer coherency: ok
[    0.061767] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.062985] devtmpfs: initialized
[    0.073352] NET: Registered protocol family 16
[    0.074044] bcm2708.uart_clock = 0
[    0.075662] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.075719] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.075757] mailbox: Broadcom VideoCore Mailbox driver
[    0.075862] bcm2708_vcio: mailbox at f200b880
[    0.075969] bcm_power: Broadcom power driver
[    0.076008] bcm_power_open() -> 0
[    0.076034] bcm_power_request(0, 8)
[    0.576718] bcm_mailbox_read -> 00000080, 0
[    0.576756] bcm_power_request -> 0
[    0.576782] Serial: AMBA PL011 UART driver
[    0.576936] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.885401] console [ttyAMA0] enabled
[    0.910913] bio: create slab <bio-0> at 0
[    0.916129] SCSI subsystem initialized
[    0.920124] usbcore: registered new interface driver usbfs
[    0.925851] usbcore: registered new interface driver hub
[    0.931432] usbcore: registered new device driver usb
[    0.937467] Switching to clocksource stc
[    0.941715] FS-Cache: Loaded
[    0.944899] CacheFiles: Loaded
[    0.961633] NET: Registered protocol family 2
[    0.966470] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.974642] TCP established hash table entries: 16384 (order: 5, 131072 bytes                           )
[    0.982685] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.989645] TCP: Hash tables configured (established 16384 bind 16384)
[    0.996252] TCP reno registered
[    0.999424] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.005340] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.012158] NET: Registered protocol family 1
[    1.017290] RPC: Registered named UNIX socket transport module.
[    1.023424] RPC: Registered udp transport module.
[    1.028147] RPC: Registered tcp transport module.
[    1.032898] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.039645] bcm2708_dma: DMA manager at df808000
[    1.044443] bcm2708_gpio: bcm2708_gpio_probe c04e9c18
[    1.049903] vc-mem: phys_addr:0x00000000 mem_base=0x1f000000 mem_size:0x20000                           000(512 MiB)
[    1.059188] audit: initializing netlink socket (disabled)
[    1.064738] type=2000 audit(0.750:1): initialized
[    1.181180] VFS: Disk quotas dquot_6.5.2
[    1.185423] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.192961] FS-Cache: Netfs 'nfs' registered for caching
[    1.199221] msgmni has been set to 971
[    1.205087] io scheduler noop registered
[    1.209057] io scheduler deadline registered
[    1.213631] io scheduler cfq registered (default)
[    1.232623] Console: switching to colour frame buffer device 82x26
[    1.244951] kgdb: Registered I/O driver kgdboc.
[    1.261290] brd: module loaded
[    1.271714] loop: module loaded
[    1.277800] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master =                            0
[    1.287542] vcos: [1]: vchiq_init_state: called
[    1.295262] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[    1.305264] usbcore: registered new interface driver smsc95xx
[    1.313356] cdc_ncm: 04-Aug-2011
[    1.318898] usbcore: registered new interface driver cdc_ncm
[    1.326840] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.539949] Core Release: 2.80a
[    1.545355] Setting default values for core params
[    1.552352] Finished setting default values for core params
[    1.765189] Using Buffer DMA mode
[    1.770591] Periodic Transfer Interrupt Enhancement - disabled
[    1.778575] Multiprocessor Interrupt Enhancement - disabled
[    1.786289] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.792834] Dedicated Tx FIFOs mode
[    1.798667] dwc_otg: Microframe scheduler enabled
[    1.798721] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.805940] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number                            1
[    1.815619] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.823399] Init: Port Power? op_state=1
[    1.829450] Init: Power Port (0)
[    1.834968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.844052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                           1
[    1.853523] usb usb1: Product: DWC OTG Controller
[    1.860414] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
[    1.868356] usb usb1: SerialNumber: bcm2708_usb
[    1.875963] hub 1-0:1.0: USB hub found
[    1.881960] hub 1-0:1.0: 1 port detected
[    1.888674] dwc_otg: FIQ enabled
[    1.888693] dwc_otg: NAK holdoff enabled
[    1.888715] Module dwc_common_port init
[    1.889059] usbcore: registered new interface driver uas
[    1.896574] Initializing USB Mass Storage driver...
[    1.903829] usbcore: registered new interface driver usb-storage
[    1.912024] USB Mass Storage support registered.
[    1.918940] usbcore: registered new interface driver libusual
[    1.927260] mousedev: PS/2 mouse device common for all mice
[    1.935876] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    1.941777] bcm2835-cpufreq: switching to governor powersave
[    1.949530] bcm2835-cpufreq: switching to governor powersave
[    1.957398] cpuidle: using governor ladder
[    1.965584] cpuidle: using governor menu
[    1.971617] sdhci: Secure Digital Host Controller Interface driver
[    1.979763] sdhci: Copyright(c) Pierre Ossman
[    1.986372] sdhci: Enable low-latency mode
[    1.992534] bcm_power_open() -> 1
[    1.998022] Registered led device: mmc0::
[    1.999499] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor                           m's DMA
[    2.011371] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.019524] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.028738] Registered led device: led0
[    2.029134] usbcore: registered new interface driver usbhid
[    2.036915] usbhid: USB HID core driver
[    2.051812] TCP cubic registered
[    2.057134] Initializing XFRM netlink socket
[    2.063645] NET: Registered protocol family 17
[    2.072364] Registering the dns_resolver key type
[    2.081379] VFP support v0.3: Indeed it is in host mode hprt0 = 00021501
[    2.092686] implementor 41 architecture 1 part 20 variant b rev 5
[    2.122583] registered taskstats version 1
[    2.128906] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.148116] mmc0: problem reading SD Status register.
[    2.155971] Waiting for root device /dev/mmcblk0p2...
[    2.179052] mmc0: new high speed SDHC card at address b368
[    2.202202] mmcblk0: mmc0:b368 SMI   3.74 GiB
[    2.210600]  mmcblk0: p1 p2
[    2.296860] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O                           pts: (null)
[    2.309692] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.324476] devtmpfs: mounted
[    2.330654] Freeing init memory: 124K
[    2.336878] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.346431] Indeed it is in host mode hprt0 = 00001101
[    2.562245] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.571376] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.581955] hub 1-1:1.0: USB hub found
[    2.589245] hub 1-1:1.0: 3 ports detected
[    2.871774] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.002337] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.014743] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber                           =0
[    3.031804] smsc95xx v1.0.4
[    3.107317] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-                           1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e3:7c:6f
[    3.201809] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[    3.328291] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[    3.351592] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber                           =3
[    3.361375] usb 1-1.3: Product: FT232R USB UART
[    3.381588] usb 1-1.3: Manufacturer: FTDI
[    3.387924] usb 1-1.3: SerialNumber: A901LL1J
[    3.732238] udevd[137]: starting version 175
[    5.009710] usbcore: registered new interface driver usbserial
[    5.181709] USB Serial support registered for generic
[    5.189437] usbcore: registered new interface driver usbserial_generic
[    5.555454] usbserial: USB Serial Driver core
[    5.766141] USB Serial support registered for FTDI USB Serial Device
[    5.947447] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[    6.056300] usb 1-1.3: Detected FT232RL
[    6.141571] usb 1-1.3: Number of endpoints 2
[    6.148276] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[    6.257811] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[    6.303343] usb 1-1.3: Setting MaxPacketSize 64
[    6.346611] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUS                           B0
[    6.396293] usbcore: registered new interface driver ftdi_sio
[    6.434978] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   14.426590] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   14.835176] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   15.530768] bcm2835 ALSA card created!
[   15.544516] bcm2835 ALSA chip created!
[   15.556794] bcm2835 ALSA chip created!
[   15.569766] bcm2835 ALSA chip created!
[   15.580888] bcm2835 ALSA chip created!
[   15.596648] bcm2835 ALSA chip created!
[   15.604671] bcm2835 ALSA chip created!
[   15.610382] bcm2835 ALSA chip created!
[   15.694208] tun: Universal TUN/TAP device driver, 1.6
[   15.700879] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   23.946395] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41                           E1
[   30.517273] Adding 102396k swap on /var/swap.  Priority:-1 extents:129 across                           :1754856k SS