OSCam + Rasp Pi 3 + Easymouse2 "Error activating card" V14

[Gelöschtes Mitglied 730429]

Hallo an die Spezialisten,

habe den Raspberry Pi 3 mit IPC aufgesetzt und OSCam auf den neuesten Stand gebracht. Nach vielen Tagen der Suche hänge ich nun an der Herausforderung, dass offenbar die Karte nicht richtig erkannt wird.

Kann mir jemand helfen?

Spoiler: oscam.log

2016/08/27 08:45:59 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (arm-linux-gnueabihf)
2016/08/27 08:45:59 00000000 s (main) System name = Linux
2016/08/27 08:45:59 00000000 s (main) Host name = raspberrypi
2016/08/27 08:45:59 00000000 s (main) Release = 4.4.13-v7+
2016/08/27 08:45:59 00000000 s (main) Version = #894 SMP Mon Jun 13 13:13:27 BST 2016
2016/08/27 08:45:59 00000000 s (main) Machine = armv7l
2016/08/27 08:45:59 00000000 s (main) creating pidfile /var/log/ipc/OScam.pid with pid 20487
2016/08/27 08:45:59 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2016/08/27 08:45:59 00000000 s (main) signal handling initialized
2016/08/27 08:45:59 00000000 s (net) cccam: initialized (fd=6, port=12000, ip=192.168.xxx.xx)
2016/08/27 08:45:59 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2016/08/27 08:45:59 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/08/27 08:45:59 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/08/27 08:45:59 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/08/27 08:45:59 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/08/27 08:45:59 00000000 s (reader) Easymouse2 [mouse] creating thread for device /dev/ttyUSB0
2016/08/27 08:45:59 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/08/27 08:45:59 00000000 s (main) waiting for local card init
2016/08/27 08:45:59 5B6A9547 h (webif) webif: decompressed 172774 bytes back into 419140 bytes
2016/08/27 08:45:59 5B6A9547 h (webif) HTTP Server running. ip=192.168.xxx.xx port=16002
2016/08/27 08:45:59 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75134
2016/08/27 08:45:59 38A2D0D5 r (reader) Easymouse2 [mouse] Flush readed byte Nr 1 value 03 time_us 6797
2016/08/27 08:45:59 38A2D0D5 r (reader) Easymouse2 [mouse] Flush readed byte Nr 2 value 40 time_us 1430
2016/08/27 08:45:59 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 2 bytes total time_us 83435
2016/08/27 08:45:59 38A2D0D5 r (reader) Easymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2016/08/27 08:46:00 38A2D0D5 r (reader) Easymouse2 [mouse] card detected
2016/08/27 08:46:00 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75117
2016/08/27 08:46:01 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 79971
2016/08/27 08:46:02 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75097
2016/08/27 08:46:03 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 08:46:04 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75099
2016/08/27 08:46:05 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75096
2016/08/27 08:46:06 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75119
2016/08/27 08:46:07 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 08:46:08 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75136
2016/08/27 08:46:09 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75119
2016/08/27 08:46:10 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 08:46:11 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 08:46:12 38A2D0D5 r (reader) Easymouse2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/08/27 08:46:12 38A2D0D5 r (reader) Easymouse2 [mouse] card initializing error

Spoiler: oscam.conf

[global]
serverip = 192.168.xxx.xx
pidfile = /var/log/ipc/OScam.pid
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 4960
cwlogdir = /var/log/ipc/
emmlogdir = /var/log/ipc/
usrfile = /var/log/ipc/user.log
preferlocalcards = 2

[cccam]
port = 12000
serverip = 192.168.xxx.xx
nodeid = B443758410BC14F0
version = 2.3.0
reshare = 2
reshare_mode = 0
recv_timeout = 4000
stealth = 1

[webif]
httpport = 16002
httpuser = user
httppwd = pwd
httphelplang = de
httprefresh = 15
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.xxx.0-192.168.xxx.255
hideclient_to = 15
http_status_log = 1

Spoiler: oscam.server

[reader]
label = Easymouse2
description = Sky All-in-Abo
enable = 1
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
cardmhz = 358
mhz = 358
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 52,57,64,6A,9B,9C,A1,91,96,97,98,9D
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion = 2

Besten Dank
Seraphim2k

 

[dodo83]

wenn mir jemand die Spoiler-Funktion erklären könnte

HowTo - Wie Poste ich im OScam Bereich richtig

einfach die Configs per Copy&Past rein, keine Dateien hochladen

 

[supraracer]

Easymouse Schalter oben-unten-unten-unten

oscam.server

Spoiler

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 358
cardmhz = 358
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

-supraracer

 

[Gelöschtes Mitglied 730429]

@dodo83: Dankeschön. Jetzt ist 1. Post komplett.

@supraracer: Die Einstellungen habe ich auch...

 

[dodo83]

änder mal ab auf

mhz = 600
cardmhz = 357

die Easymouse auf

Du musst angemeldet sein, um Bilder zu sehen.

der erste kann auch auf 3,3V bleiben, ist egal
neu starten danach

 

[Gelöschtes Mitglied 730429]

Ich muss mich korrigieren, supraracer. Habe den 4 Steller auf Y5 (unten) gestellt. Nun geht der log wie folgt weiter

Spoiler: oscam.log nach Y5-Stellung

2016/08/27 12:05:28 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:05:28 38A2D0D5 r (reader) Easymouse2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/08/27 12:05:28 38A2D0D5 r (reader) Easymouse2 [mouse] card initializing error
2016/08/27 12:05:29 00000000 s (main) init for all local cards done
2016/08/27 12:05:29 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms
2016/08/27 12:05:29 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms
2016/08/27 12:05:29 00000000 s (anticasc) anti cascading disabled
2016/08/27 12:05:29 4F200785 c (client) anonymous disconnected from 192.168.xxx.xx
2016/08/27 12:05:32 69B040D4 c (client) encrypted cccam-client 192.168.xxx.xx granted (User, au=auto (1 reader))

Bedeutet dass, das ich nun weitermachen kann? (Clients anlegen, EMMs sammeln?)

 

[dodo83]

der vierte Schalter ist egal wenn der dritte unten ist ....
in deinem kurzem log jetzt, sieht man nicht das die Karte jetzt eingelesen wird....

 

[Gelöschtes Mitglied 730429]

Dann gerne nochmal komplett mit Easymouse auf oben-unten-unten-unten

Spoiler: oscam.log

2016/08/27 12:14:58 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (arm-linux-gnueabihf)
2016/08/27 12:14:58 00000000 s (main) System name = Linux
2016/08/27 12:14:58 00000000 s (main) Host name = raspberrypi
2016/08/27 12:14:58 00000000 s (main) Release = 4.4.13-v7+
2016/08/27 12:14:58 00000000 s (main) Version = #894 SMP Mon Jun 13 13:13:27 BST 2016
2016/08/27 12:14:58 00000000 s (main) Machine = armv7l
2016/08/27 12:14:58 00000000 s (main) creating pidfile /var/log/ipc/OScam.pid with pid 18738
2016/08/27 12:14:58 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2016/08/27 12:14:58 00000000 s (main) signal handling initialized
2016/08/27 12:14:58 00000000 s (net) cccam: initialized (fd=6, port=12000, ip=192.168.xxx.xx)
2016/08/27 12:14:58 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2016/08/27 12:14:58 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/08/27 12:14:58 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/08/27 12:14:58 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/08/27 12:14:58 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/08/27 12:14:58 00000000 s (reader) Easymouse2 [mouse] creating thread for device /dev/ttyUSB0
2016/08/27 12:14:58 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/08/27 12:14:58 00000000 s (main) waiting for local card init
2016/08/27 12:14:58 5B6A9547 h (webif) webif: decompressed 172774 bytes back into 419140 bytes
2016/08/27 12:14:58 5B6A9547 h (webif) HTTP Server running. ip=192.168.xxx.xx port=16002
2016/08/27 12:14:58 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75136
2016/08/27 12:14:58 38A2D0D5 r (reader) Easymouse2 [mouse] Flush readed byte Nr 1 value 03 time_us 6923
2016/08/27 12:14:58 38A2D0D5 r (reader) Easymouse2 [mouse] Flush readed byte Nr 2 value 40 time_us 1438
2016/08/27 12:14:58 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 2 bytes total time_us 83554
2016/08/27 12:14:58 38A2D0D5 r (reader) Easymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2016/08/27 12:14:59 38A2D0D5 r (reader) Easymouse2 [mouse] card detected
2016/08/27 12:14:59 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75137
2016/08/27 12:15:00 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 12:15:02 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75098
2016/08/27 12:15:03 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:15:03 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75098
2016/08/27 12:15:06 38A2D0D5 r (-) -- Skipped 1 duplicated log lines --
2016/08/27 12:15:06 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 12:15:07 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:15:07 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75134
2016/08/27 12:15:09 38A2D0D5 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 12:15:11 38A2D0D5 r (-) -- Skipped 1 duplicated log lines --
2016/08/27 12:15:11 38A2D0D5 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:15:11 38A2D0D5 r (reader) Easymouse2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/08/27 12:15:11 38A2D0D5 r (reader) Easymouse2 [mouse] card initializing error
2016/08/27 12:15:12 00000000 s (main) init for all local cards done
2016/08/27 12:15:12 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms
2016/08/27 12:15:12 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms
2016/08/27 12:15:12 00000000 s (anticasc) anti cascading disabled
2016/08/27 12:15:12 4F200785 c (client) anonymous disconnected from 192.168.xxx.xx
2016/08/27 12:15:17 69B040D4 c (client) encrypted cccam-client 192.168.xxx.xx granted (User, au=auto (1 reader))

 

[dodo83]

nochmal komplett mit Easymouse auf oben-unten-unten-unten

siehe nochmal meinen Vorschlag von oben, dann log posten bitte

 

[Mau33]

caid=098C hab was durcheinander gebracht, sorry

3,3 V Phoenix. 3,58 MHz

Schwachsinnig sind andere, ist auch eine Ausdrucksweise

Wer ohne fehler, der werfe den ersten Stein, hoaßte me.........

Weg bin i..........

 

[Gelöschtes Mitglied 730429]

@dodo83: log mit anderen Einstellungen siehe mein Post direkt vor Deinem.

@Mau33: Leider hat die Änderungen des CAID=09C8 auch nichts gebracht. // da für die Sky nur NDS VG2 genutzt wird, habe ich diese bei Installation deaktiviert. Nachinstallieren?


So, und hier der Log mit oben-unten-oben-oben und Mhz=600.

Spoiler: oscam.log

2016/08/27 12:20:18 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (arm-linux-gnueabihf)
2016/08/27 12:20:18 00000000 s (main) System name = Linux
2016/08/27 12:20:18 00000000 s (main) Host name = raspberrypi
2016/08/27 12:20:18 00000000 s (main) Release = 4.4.13-v7+
2016/08/27 12:20:18 00000000 s (main) Version = #894 SMP Mon Jun 13 13:13:27 BST 2016
2016/08/27 12:20:18 00000000 s (main) Machine = armv7l
2016/08/27 12:20:18 00000000 s (main) creating pidfile /var/log/ipc/OScam.pid with pid 19550
2016/08/27 12:20:18 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2016/08/27 12:20:18 00000000 s (main) signal handling initialized
2016/08/27 12:20:18 00000000 s (net) cccam: initialized (fd=6, port=12000, ip=192.168.xxx.xx)
2016/08/27 12:20:18 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2016/08/27 12:20:18 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/08/27 12:20:18 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/08/27 12:20:18 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/08/27 12:20:18 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/08/27 12:20:18 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/08/27 12:20:18 00000000 s (main) waiting for local card init
2016/08/27 12:20:18 5B6A9547 h (webif) webif: decompressed 172774 bytes back into 419140 bytes
2016/08/27 12:20:18 5B6A9547 h (webif) HTTP Server running. ip=192.168.xxx.xx port=16002
2016/08/27 12:20:19 00000000 s (main) init for all local cards done
2016/08/27 12:20:19 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms
2016/08/27 12:20:19 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms
2016/08/27 12:20:19 00000000 s (anticasc) anti cascading disabled
2016/08/27 12:20:23 38A2D0D5 c (client) encrypted cccam-client 192.168.xxx.xx granted (User, au=auto (1 reader))
2016/08/27 12:27:38 5B6A9547 h (reader) Easymouse2 [mouse] Restarting reader
2016/08/27 12:27:38 5B6A9547 h (reader) Easymouse2 [mouse] creating thread for device /dev/ttyUSB0
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75124
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Flush readed byte Nr 1 value 03 time_us 4800
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Flush readed byte Nr 2 value 40 time_us 1371
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Buffers readed 2 bytes total time_us 81504
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] card detected
2016/08/27 12:27:38 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 12:27:40 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75114
2016/08/27 12:27:41 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75129
2016/08/27 12:27:42 70267691 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:27:42 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75123
2016/08/27 12:27:44 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75119
2016/08/27 12:27:45 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
2016/08/27 12:27:46 70267691 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:27:46 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75137
2016/08/27 12:27:48 70267691 r (reader) Easymouse2 [mouse] Buffers readed 0 bytes total time_us 75119
2016/08/27 12:27:50 70267691 r (-) -- Skipped 1 duplicated log lines --
2016/08/27 12:27:50 70267691 r (reader) Easymouse2 [mouse] Error activating card.
2016/08/27 12:27:50 70267691 r (reader) Easymouse2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/08/27 12:27:50 70267691 r (reader) Easymouse2 [mouse] card initializing error

Sieht nicht besser aus...

 

[dodo83]

@Mau33
Caid 09C8 ???
Nagra für eine NDS Karte?

@Seraphim2k
kannst du mal die Maus samt Karte wo anders testen oder einen anderen Reader testen

 

[Alex]

Die Karte wird nicht erkannt. Steckt sie richtig? 3x Error activating card isr oft ein Zeichen dafür, dass der rEader gar nicht mit der Karte kommunizieren kann.
Caid 09C8 ist im Übrigen Schwachsinn, muss schon 098C sein

 

[Gelöschtes Mitglied 730429]

Ich könnte die Mouse an einen Windows10-PC stecken. Wie stelle ich dann fest, ob es funktioniert?

Kann ihn ja nicht mit OSCam ansteuern...

 

[Derek Buegel]

Das kannst Du auf dem Server selber testen.

lsusb

MfG

Ich könnte mir vorstellen, das beim Start ein anderer USB-Port zugewiesen wurde. Lege mal im IPC-WI eine UDEV-Rule an.

Dann die device entsprechend umbenennen.