Probleme beim Aufbau 7170 OSCam V13 Smartreader

[Baskolino]

Liebes Forum,

bin gerade dabei einen Testaufbau einzurichten für eine V13 an einer 7170 und einem Smartreader plus. USB-Hub: Speedlink aktiv;

Habe nun schon die Fritzbox gefreetzt und Daten auf dem Stick hinterlegt. Hier meine verwendeten Daten:

oscam-cccam-Image_by__rolu2_7170_04.87-freetz-devel-10515M.de_20130616-201832.external
oscam-cccam-Image_by__rolu2_7170_04.87-freetz-devel-10515M.de_20130616-201832.image

uSTOR-FILES-PATCH[TBflex-2.5-015.cs].tar.gz
uSTOR-FILES-PATCH[TBflex-2.5-016.cs].tar.gz

Stickdatein_cs_tools_watchdog_toolbox0.5dep.tar

Passen die Dateien soweit oder brauch ich noch mehr?

Vielen Dank auf für all die tollen Anleitungen! Nun stecke ich aber gerade fest: Ich habe einen SmartReaderplus an den USB-Hub gesteckt. Im Freetz wird er nun nicht im Programm "Smartreader" in der Toolbox erkannt. Da steht: "Fehler: Es wurde kein SMARTREADER+ am USB-HUB der FRITZ!BOX erkannt!"

Muss ich vorher noch etwas mit dem Reader anstellen, dass er erkannt wird? Gibts dann noch ne schöne Anleitung, wie ich CCcam und OSCam weiter configurieren muss, dass die V13 läuft?

Danke und viele Grüße

 

[rolu2]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Ableitungen gibt es doch wohl hier genug. Da es kein Tbleximage brauchst du nur die letzte von die aufgelistete Datei.diese inst. Dann sollte auch der smargo erkannt werden

Gesendet von meinem JY-G3 mit Tapatalk

 

[Baskolino]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Hallo,

danke schonmal. Ja, bin schon seit Tagen am Lesen. Anleitungen gibts genug.
Habe die "Stickdatein_cs_tools_watchdog_toolbox0.5dep.tar" schon installiert (die meintest Du doch, oder?).
Trotzdem wird der Smartreader leider nicht erkannt. :-(

 

[rolu2]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Welche Firmware ist auf dem Smargo?

Firmeware muss 1.4 oder 1.5 sein. 1.7 kann das Tool nicht

Welcher Smargo ist es V1 oder V2

V1 muss es sein

 

[Baskolino]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Hallo,

vielen Dank nochmal!! Es handelt sich um einen Smartreader+ (V1). Ich hab ihn nun unter Windows auf die Version 1.4 (final) upgedatet und er wurde tatsächlich erkannt!!!! Nun habe ich ihn versucht mit dem Smartreader-Tool den Reader einzustellen. Dies hat leider nicht geklappt:

"Der Smartreader+ kann nicht ausgelesen werden. Eventuell ist die Hardware an der FRITZ!BOX nicht für die Konfiguration des Smartreader+ mit dem SMARTREADER-TOOL geeignet. Alternativ haben Sie die Möglichkeit, Ihren Smartreader am Windows-PC mit der 'Smartreader.exe' zu konfigurieren."

Hab ihn dann wie beschrieben mit der Smartreader.exe Folgendermaßen konfiguriert:

Mode: Autoswitch
Kernal: Normal
T-Mode: T=0
EGT: 0

COM-Port hatte ich im Gerätemanager vorher auf COM2 gestellt.

Als client dient ein Edison. Prodokoll: Newcamd. Wenn ich OSCAM starte sagt der client auch: "connect to server[²] newcamd". Aber er schafft es irgendwie nicht.

Hier meine OSCAM conf:

Spoiler

[global]
pidfile = /var/run/oscam.pid
logfile = /var/media/ftp/uStor01/cs/oscam/oscam.log
usrfile = /var/media/ftp/uStor01/cs/oscam/oscamuser.log
cwlogdir = /var/media/ftp/uStor01/cs/oscam/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir =
emmlogdir =
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1

OSCAM server:

Ist die newcamd-Einstellung richtig? Hab da einfach meinen Versuchsport eingegeben...

Spoiler

[newcamd]
port = 35000
key = 0102030405060708091011121314
keepalive = 1

[reader]
label = SKY
enable = 1
protocol = mouse
device = /dev/ttyUSB3
device_out_endpoint = 0x82
services = skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport
smargopatch = 1
caid = 09C4
boxid = 12345678
ecmwhitelist = 46,90
detect = cd
mhz = 357
cardmhz = 357
ident = 09C4:000000
group = 4
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001

Hier mein Log-File:

Spoiler

Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ac20>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ac20>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ac20>] [<941
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ac20>] [<941
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:09:06 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:09:06 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:10:45 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:10:45 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:11:09 fritz user.info kernel: usbcore: deregistering driver ftdi_sio
Jan 6 17:11:09 fritz user.info kernel: ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Jan 6 17:11:09 fritz user.info kernel: ftdi_sio 1-1.2:1.0: device disconnected
Jan 6 17:11:09 fritz user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver FTDI USB Serial Device
Jan 6 17:11:09 fritz user.info kernel: usbcore: deregistering driver usbserial_generic
Jan 6 17:11:09 fritz user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Generic
Jan 6 17:11:09 fritz user.info kernel: usbcore: deregistering driver usbserial
Jan 6 17:11:10 fritz user.info kernel: usbcore: registered new driver usbserial
Jan 6 17:11:10 fritz user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
Jan 6 17:11:10 fritz user.info kernel: usbcore: registered new driver usbserial_generic
Jan 6 17:11:10 fritz user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Jan 6 17:11:10 fritz user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Jan 6 17:11:10 fritz user.info kernel: ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Jan 6 17:11:10 fritz user.info kernel: drivers/usb/serial/ftdi_sio.c: Detected FT232BM
Jan 6 17:11:10 fritz user.info kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Jan 6 17:11:10 fritz user.info kernel: usbcore: registered new driver ftdi_sio
Jan 6 17:11:10 fritz user.info kernel: drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Jan 6 17:12:20 fritz user.debug kernel: usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd listusb rqt 128 rq 0 len 2 ret -145
Jan 6 17:12:50 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:12:50 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:13:07 fritz user.info kernel: usb 1-1.2: USB disconnect, address 4
Jan 6 17:13:07 fritz user.info kernel: ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Jan 6 17:13:07 fritz user.info kernel: ftdi_sio 1-1.2:1.0: device disconnected
Jan 6 17:14:55 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:14:55 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:16:05 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:16:05 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:16:05 fritz user.warn kernel: Badness in local_bh_enable at kernel/softirq.c:149
Jan 6 17:16:05 fritz user.warn kernel: Call Trace: [<c01212c4>] [<9402aca0>] [<94129448>] [<941292dc>] [<940b6520>] [<940b6520>] [<c0414b4c>] [<c04673c0>] [<c0415494>] [<c0427598>] [<c04234b4>] [<c01197ac>] [<9402b048>] [<9402ab3c>] [<9402ab3c>] [<940
Jan 6 17:17:00 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:17:00 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:19:05 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:19:05 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:19:56 fritz user.info kernel: usb 1-1.2: new full speed USB device using ahci and address 5
Jan 6 17:19:58 fritz user.info kernel: ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Jan 6 17:19:58 fritz user.info kernel: drivers/usb/serial/ftdi_sio.c: Detected FT232BM
Jan 6 17:19:58 fritz user.info kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Jan 6 17:20:27 fritz user.warn kernel: /proc/tffs: info request: success
Jan 6 17:21:10 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:21:10 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:23:15 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:23:15 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:25:20 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:25:20 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:27:25 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:27:25 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:29:30 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:29:30 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec
Jan 6 17:31:35 fritz user.debug kernel: mcfw: group 0.0.0.0: query tiwlan:0 10sec
Jan 6 17:31:35 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0 10sec

Warum zur Hölle funktioniert das net? Ich checks halt net....

EDIT

Sorry für die Newbie-Frage: Muss ich was in der OSCAM.user eintragen? Bei mir schaut die folgendermaßen aus:

Spoiler

[account]
user = Client1
pwd = pass1
group = 1,2,3,4,5,6,7,8,9,10
uniq = 1
monlevel = 0
services = orf-key,um-key,skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport,hdplus
caid = 1702,1830,0D05,1801
suppresscmd08 = 1
cccmaxhops = 4

EDIT2

und hier noch das OScam-log file. Da steht, dass er usb nicht öffnen kann... Kann da jemand helfen?

Spoiler

2000/01/01 1:01:08 400 s >> OSCam << cardserver started, version 1.10rc-svn, build #6105 (mipsel-router-linux-uclibc929)
2000/01/01 1:01:08 400 s version=1.10rc-svn, build #6105, system=mipsel-router-linux, nice=-1
2000/01/01 1:01:08 400 s client max. idle=120 sec, debug level=0
2000/01/01 1:01:08 400 s max. logsize=100 Kb, loghistorysize=4096 bytes
2000/01/01 1:01:08 400 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 1:01:08 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:13 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:18 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:23 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:28 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:33 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:38 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:43 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:48 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2000/01/01 1:01:53 400 s The current system time is smaller than the build date (Jan 1 2012). Waiting 5s for time to correct...
2014/01/06 18:32:57 400 s services reloaded: 0 services freed, 38 services loaded, rejected 0
2014/01/06 18:32:58 400 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/01/06 18:32:58 400 s signal handling initialized (type=sysv)
2014/01/06 18:32:59 400 s 2219 service-id's loaded in 244ms
2014/01/06 18:32:59 400 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2014/01/06 18:32:59 400 s HINT: --> use optimized lists from

Sie müssen registriert sein, um Links zu sehen.

2014/01/06 18:32:59 400 s 256 tier-id's loaded
2014/01/06 18:32:59 400 s 10 provid's loaded
2014/01/06 18:32:59 400 s 1 lengths for caid guessing loaded
2014/01/06 18:32:59 400 s monitor: initialized (fd=9, port=988)
2014/01/06 18:32:59 400 s camd33: disabled
2014/01/06 18:32:59 400 s camd35: disabled
2014/01/06 18:32:59 400 s cs378x: disabled
2014/01/06 18:32:59 400 s newcamd: initialized (fd=10, port=35000, crypted)
2014/01/06 18:32:59 400 s radegast: disabled
2014/01/06 18:32:59 400 s http thread started
2014/01/06 18:32:59 400 s creating thread for device /dev/ttyUSB3
2014/01/06 18:32:59 400 s creating thread for device localhost
2014/01/06 18:32:59 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/06 18:32:59 400 s waiting for local card init
2014/01/06 18:32:59 803 h HTTP Server listening on port 83
2014/01/06 18:32:59 C04 r reader thread started (thread= C04, label=sky, device=/dev/ttyUSB3, detect=cd, mhz=357, cardmhz=357)
2014/01/06 18:32:59 C04 r ERROR opening device /dev/ttyUSB3
2014/01/06 18:32:59 C04 r Cannot open device: /dev/ttyUSB3
2014/01/06 18:32:59 1005 p proxy thread started (thread= 1005, label=keyserver, server=localhost)
2014/01/06 18:32:59 1005 p proxy localhost:12345 (fd=18)
2014/01/06 18:33:59 C04 r ERROR opening device /dev/ttyUSB3
2014/01/06 18:33:59 C04 r Cannot open device: /dev/ttyUSB3
2014/01/06 18:34:59 C04 r ERROR opening device /dev/ttyUSB3

 

[Baskolino]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Hallo,

so, habe nun noch einige Änderungen vorgenommen: Ziel: CS mittels oscam über dyndns. Hardware wie oben beschrieben. Verbindung mit client klappt jetzt auch schon. Nur die V13 wird irgendwie nicht erkannt.
hier mal meine Einstellungen:

oscam server:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5536
# Read more:

Sie müssen registriert sein, um Links zu sehen.

#Readereinstellungen fuer ein V13

[reader]
label = SKY
enable = 1
protocol = mouse
Smargopatch = 1
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport
#smargopatch = 1
caid = 09C4
boxid = 12345678
ecmwhitelist = 46,90
detect = cd
mhz = 357
cardmhz = 357
ident = 09C4:000000
group = 4
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001



#Keyservereinstellungen fuer ein orf/um-keys
[reader]
label = keyserver
protocol = camd35
device = localhost,12345
user = server
password = pass
services = orf-key,um-key
reconnecttimeout = 300
group = 10

Oscam conf:

Spoiler

[global]
pidfile = /var/run/oscam.pid
logfile = /var/media/ftp/uStor01/logs/oscam.log
usrfile = /var/media/ftp/uStor01/cs/oscam/oscamuser.log
cwlogdir = /var/media/ftp/uStor01/cs/oscam/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir =
emmlogdir =
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 1
httpdyndns = hier steht meine dyndns
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1

[newcamd]
port = 35000@09c4:000000
key = 0102030405060708091011121314
keepalive = 1




[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httpcss = /var/media/ftp/uStor01/cs/oscam/nfstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,125.123.0.0-125.123.255.255,192.168.178.0-192.168.178.29
httphideidleclients = 1
httpreadonly = 0
httpdyndns = hier steht meine dyndns

Fehlermeldung aus dem Log:

"Error activating card"

Spoiler

014/01/12 14:20:40 400 s creating thread for device /dev/ttyUSB0
2014/01/12 14:20:40 400 s creating thread for device localhost
2014/01/12 14:20:40 803 h HTTP Server listening on port 83
2014/01/12 14:20:40 C04 r reader thread started (thread= C04, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/01/12 14:20:40 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/12 14:20:40 400 s waiting for local card init
2014/01/12 14:20:40 1005 p proxy thread started (thread= 1005, label=keyserver, server=localhost)
2014/01/12 14:20:40 1005 p proxy localhost:12345 (fd=19)
2014/01/12 14:20:43 C04 r sky card detected
2014/01/12 14:20:51 C04 r ATR: irgend n hex code
2014/01/12 14:20:53 C04 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2014/01/12 14:21:04 C04 r card system not supported
2014/01/12 14:21:04 C04 r Normal mode failed, reverting to Deprecated Mode
2014/01/12 14:21:11 C04 r ATR: irgend n hex code
2014/01/12 14:21:11 C04 r ERROR: Parse_ATR returned error
2014/01/12 14:21:11 C04 r Error activating card.

ist mein reader schrott oder meine Konfiguration?

Danke schon mal und viele Grüße

 

[Baskolino]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Thema kann geschlossen werden; Reader konnte mit keinen gewählten Einstellungen betrieben werden. Lösung: Umstieg auf anderen Router brachte Erfolg; Vielleicht hatte auch der alte Router nen Schlag; war nicht mehr ganz taufrisch.VG

 

[Türover]

AW: Probleme beim Aufbau 7170 OSCam V13 Smartreader

Welcher Router neu?


Gesendet von meinem iPad mit Tapatalk HD