oscam KD D09

[d33jay]

Hallo Gemeinde,

mein Vater hat eine Atemio Nemesis (Openatv 4) mit OSCam 1.20 Build: r10940. Ich versuche seit gestern die Karte zum laufen zu überreden. Leider ohne Erfolg. Daher hoffe ich auf eure Mithilfe.

Meine Fehlermeldung:

Spoiler

2015/08/19 20:09:25 2B2C53C8 h   (reader) d09 [internal] Restarting reader
2015/08/19 20:09:25 2B2C53C8 h   (reader) d09 [internal] creating thread for device /dev/sci0
2015/08/19 20:09:25 11CEFA7C r   (reader) d09 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/08/19 20:09:25 11CEFA7C r   (reader) d09 [internal] Reader sci internal, detected box type: ini-8000am
2015/08/19 20:09:26 11CEFA7C r   (reader) d09 [internal] card detected
2015/08/19 20:09:27 11CEFA7C r   (reader) d09 [internal] ATR: 3F XX XX 28 
2015/08/19 20:09:27 11CEFA7C r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:09:27 11CEFA7C r   (reader) d09 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/08/19 20:09:32 11CEFA7C r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 4999592
2015/08/19 20:09:33 11CEFA7C r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:09:33 11CEFA7C r   (reader) d09 [internal] Card responded ok for ifsd request of 160
2015/08/19 20:09:34 11CEFA7C r   (reader) d09 [internal] detect native nagra card
2015/08/19 20:09:34 11CEFA7C r   (reader) d09 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/08/19 20:09:34 11CEFA7C r   (reader) d09 [internal] card system not supported
2015/08/19 20:09:34 11CEFA7C r   (reader) d09 [internal] Normal mode failed, reverting to Deprecated Mode
2015/08/19 20:09:36 11CEFA7C r   (reader) d09 [internal] ATR: 3F XX XX 28 
2015/08/19 20:09:36 11CEFA7C r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:09:36 11CEFA7C r   (reader) d09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/08/19 20:09:41 11CEFA7C r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 4999497
2015/08/19 20:09:41 11CEFA7C r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:09:48 11CEFA7C r   (reader) d09 [internal] Warning: Card returned error on setting ifsd value to 160
2015/08/19 20:09:49 11CEFA7C r   (reader) d09 [internal] detect native nagra card
2015/08/19 20:09:55 11CEFA7C r   (reader) d09 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/08/19 20:10:02 11CEFA7C r   (reader) d09 [internal] T1 Resync command error, trying to reactivate!
2015/08/19 20:10:04 11CEFA7C r   (reader) d09 [internal] ATR: 3F XX XX 28 
2015/08/19 20:10:04 11CEFA7C r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:10:04 11CEFA7C r   (reader) d09 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/08/19 20:10:09 11CEFA7C r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 5000066
2015/08/19 20:10:09 11CEFA7C r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:10:09 11CEFA7C r   (reader) d09 [internal] Card responded ok for ifsd request of 160
2015/08/19 20:10:10 11CEFA7C r   (reader) d09 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/08/19 20:10:10 11CEFA7C r   (reader) d09 [internal] card system not supported
2015/08/19 20:10:10 11CEFA7C r   (reader) d09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/08/19 20:10:10 11CEFA7C r   (reader) d09 [internal] card initializing error

oscam.server:

Spoiler

[reader]
label                         = d09
description                   = KD D09
protocol                      = internal
device                        = /dev/sci0
key                           = 0102030405060708091011121314
caid                          = 1834
boxkey                        = 66XXB
rsakey                        = 8AXX11
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,2,0

oscam.conf

Spoiler

[global]


[cccam]
port                           = 12000
reshare                        = 0
version                        = 2.3.0


[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapiau


[webif]
httpport                      = 83
httphelplang                  = de
httprefresh                   = 10
httppollrefresh                   = 10
httpallowed                   = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

 

[4gx35]

AW: oscam KD D09

evtl mhz und cardmhz 368, autospeed=0 testen

in global sollte auch was stehen (configs siehe signatur unten)

 

[kaiserkippel]

AW: oscam KD D09

rsa key und boxkey überprüfen

 

[4gx35]

AW: oscam KD D09

rsakey = 8A54468867159C1188D13ACE7DF348FA08BDF8BE33F1B2F72F74FBCD184C825519E517E3494A6DD8CF046630456111F952979DECCFF5176D890AE93F4E267711
boxkey = 6660A9AE55A4847B

per oscam webif unter files-oscam.server prüfen(kopieren, oscam restart

 

[d33jay]

AW: oscam KD D09

Hallo, RSA und Boxkey stimmen. Ich habe die config etwas angepasst. Das Log sieht aber noch immer gleich aus.

Log:

Spoiler

2015/08/19 20:51:21 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r10940 (mipsel-openpli40-linux-gnu-libusb)
2015/08/19 20:51:21 00000000 s     (main) System name    = Linux
2015/08/19 20:51:21 00000000 s     (main) Host name      = atemionemesis
2015/08/19 20:51:21 00000000 s     (main) Release        = 3.14.2
2015/08/19 20:51:21 00000000 s     (main) Version        = #1 SMP Thu Jun 4 04:19:40 CEST 2015
2015/08/19 20:51:21 00000000 s     (main) Machine        = mips
2015/08/19 20:51:21 00000000 s     (main) Stb model      = dm8000
2015/08/19 20:51:21 00000000 s     (main) Stb vumodel    = vuduo2
2015/08/19 20:51:21 00000000 s     (main) Stb boxname    = Atemio Nemesis
2015/08/19 20:51:21 00000000 s     (main) Stb boxtype    = ini-8000am
2015/08/19 20:51:21 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 28680
2015/08/19 20:51:21 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/08/19 20:51:21 00000000 s     (main) signal handling initialized
2015/08/19 20:51:21 00000000 s      (net) cccam: initialized (fd=4, port=12000)
2015/08/19 20:51:21 00000000 s   (reader) d09 [internal] creating thread for device /dev/sci0
2015/08/19 20:51:21 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/19 20:51:21 00000000 s     (main) waiting for local card init
2015/08/19 20:51:21 2B2C53C8 r   (reader) d09 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/08/19 20:51:21 2B2C53C8 r   (reader) d09 [internal] Reader sci internal, detected box type: ini-8000am
2015/08/19 20:51:21 3D9B07E9 h    (webif) webif: decompressed 163435 bytes back into 391368 bytes
2015/08/19 20:51:21 3D9B07E9 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/08/19 20:51:22 2B2C53C8 r   (reader) d09 [internal] card detected
2015/08/19 20:51:24 2B2C53C8 r   (reader) d09 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28  
2015/08/19 20:51:24 2B2C53C8 r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:51:24 2B2C53C8 r   (reader) d09 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/08/19 20:51:29 2B2C53C8 r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 4999756
2015/08/19 20:51:29 2B2C53C8 r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:51:29 2B2C53C8 r   (reader) d09 [internal] Card responded ok for ifsd request of 160
2015/08/19 20:51:30 2B2C53C8 r   (reader) d09 [internal] detect native nagra card
2015/08/19 20:51:31 2B2C53C8 r   (reader) d09 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/08/19 20:51:31 2B2C53C8 r   (reader) d09 [internal] card system not supported
2015/08/19 20:51:31 2B2C53C8 r   (reader) d09 [internal] Normal mode failed, reverting to Deprecated Mode
2015/08/19 20:51:32 2B2C53C8 r   (reader) d09 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28  
2015/08/19 20:51:32 2B2C53C8 r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:51:32 2B2C53C8 r   (reader) d09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/08/19 20:51:37 2B2C53C8 r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 4999567
2015/08/19 20:51:38 2B2C53C8 r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:51:44 2B2C53C8 r   (reader) d09 [internal] Warning: Card returned error on setting ifsd value to 160
2015/08/19 20:51:45 2B2C53C8 r   (reader) d09 [internal] detect native nagra card
2015/08/19 20:51:52 2B2C53C8 r   (reader) d09 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/08/19 20:51:58 2B2C53C8 r   (reader) d09 [internal] T1 Resync command error, trying to reactivate!
2015/08/19 20:52:00 2B2C53C8 r   (reader) d09 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2015/08/19 20:52:00 2B2C53C8 r   (reader) d09 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/19 20:52:00 2B2C53C8 r   (reader) d09 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/08/19 20:52:05 2B2C53C8 r   (reader) d09 [internal] Buffers readed  0 bytes total time_us 5000073
2015/08/19 20:52:05 2B2C53C8 r   (reader) d09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/08/19 20:52:05 2B2C53C8 r   (reader) d09 [internal] Card responded ok for ifsd request of 160
2015/08/19 20:52:06 2B2C53C8 r   (reader) d09 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/08/19 20:52:06 2B2C53C8 r   (reader) d09 [internal] card system not supported
2015/08/19 20:52:06 2B2C53C8 r   (reader) d09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/08/19 20:52:06 2B2C53C8 r   (reader) d09 [internal] card initializing error
2015/08/19 20:52:06 00000000 s     (main) init for all local cards done
2015/08/19 20:52:06 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/08/19 20:52:06 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/08/19 20:52:06 00000000 s (anticasc) anti cascading disabled
2015/08/19 20:52:06 19E68463 c   (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2015/08/19 20:52:06 19E68463 c   (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/08/19 20:52:06 19E68463 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/08/19 20:52:07 19E68463 c   (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in PMT
2015/08/19 20:52:07 19E68463 c   (dvbapi) Demuxer 0 serving srvid 2B98 (FFFE@000000:2B98 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0066

oscam.conf

Spoiler

[global]
maxlogsize                    = 256
nice                          = -1
preferlocalcards              = 1
fallbacktimeout               = 2500
ecmfmt                        = c/s/l/y


[cccam]
port                           = 12000
reshare                        = 0
version                        = 2.3.0


[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapiau


[webif]
httpport                      = 83
httphelplang                  = de
httprefresh                   = 10
httppollrefresh                   = 10
httpallowed                   = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

oscam.server

Spoiler

[reader]
label                         = d09
description                   = KD D09
protocol                      = internal
device                        = /dev/sci0
caid                          = 1834
rsakey = 8AXX11
boxkey = 66XX7B
detect                        = cd
mhz                           = 1
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,2,0

Was mich wundert ist der ausgelesene ATR:

mein ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 
laut SB:    3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D

LG, d33jay

 

[4gx35]

AW: oscam KD D09

autospeed funktioniert evtl. nicht, hatte doch alternative einstellungen gepostet
deine sind für dreambox und mips boxen, die das können

 

[d33jay]

AW: oscam KD D09

Hallo 4gx,

ich habe beide Einstellungen bereits getestet

autospeed = 1

und

mhz                           = 1
cardmhz                     = 2700

 

[4gx35]

AW: oscam KD D09

habe selbst leider kein kd, daher kann ich configs nicht überprüfen,
hier sind doch viele kd user, warte mal ab

 

[d33jay]

AW: oscam KD D09

Danke für deine Unterstützung 4gx35

 

[besimbln]

AW: oscam KD D09

dan versuche mal

Spoiler

mhz = 600
cardmhz = 600
autospeed = 0

hattest du den schon das von 4gx35 empfohlene probiert ?

Spoiler

mhz und cardmhz 368, autospeed=0 testen

 

[pehedima]

AW: oscam KD D09

Nach dem gelesenen ATR handelt es sich eher um eine HD01/02 Karte und nicht um eine D09.
Prüfe mal bitte in welchem Slot die Karte steckt. Evtl. mal umstecken.


Gesendet von meiner Handquetsche

 

[d33jay]

AW: oscam KD D09

Hallo danke euch beiden. Ich stecke die Karte nachher um und teste im unteren Reader. Die Karte ist ganz neu (ca. 2 Wochen). Was ich nicht verstehe ist der falsch ausgelesene ATR. Sowas hatte ich bisher nicht.

LG, d33jay

 

[pehedima]

AW: oscam KD D09

Das mit dem ATR ist ganz einfach.
In dem Slot, in dem lt. Reader eine D09 Karte stecken sollte, steckt eine HD02 Karte.

ATR einer HD02:

3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

Das ATR passt exakt mit dem von dir ausgelesenden überein.
Da boxkey und rsakey für die HD02 anders sind im Gegensatz zu einer D09 wird die HD02 nicht vollständig eingelesen.

Daher:
Die D09 in dem Slot stecken, in dem derzeit die HD02 steckt und ein neues Logfile posten.

 

[d33jay]

AW: oscam KD D09

Hallo pehedima,

leider ist es nicht ganz so einfach wie von dir vermutet. Ich habe nur eine Karte. Der tausch des Readers hat das Problem auch nicht gelöst. Ich habe vor dem Posting schon intensiv gegoogelt und die Forensuche bemüht. Bin aber an dem Punkt nicht weiter gekommen. Es ist nur das Basis Paket auf die Karte gebucht sollte das als Hinweis helfen.

LG, d33jay

 

[DarkStarXxX]

AW: oscam KD D09

KD bucht aber in der Regel keine Basis Pakete mehr auf eine neue D09.
Standard Karten sind derzeit D03/08 & G02/09.