gelöst UM02 Karte geht mit Oscam nicht mehr

[bubbl]

Das ist egal
Karte ist ja hell wie du sagst.
Starte mal deine Box neu und schalte auf ein sky Sender.
Hier dann das log anhängen

Und warum ist der reader 2 mal eingetragen?

 

[AKGR]

Spoiler: Log file nach Neustart anschliesend Programmwechsel

2024/11/06 19:31:42 00000000 s (main) System name = Linux
2024/11/06 19:31:42 00000000 s (main) Host name = Giga1-W
2024/11/06 19:31:42 00000000 s (main) Release = 4.1.20-1.9
2024/11/06 19:31:42 00000000 s (main) Version = #1 SMP Sat May 18 12:18:50 UTC 2024
2024/11/06 19:31:42 00000000 s (main) Machine = armv7l
2024/11/06 19:31:42 00000000 s (main) Stb model = gbquad4k
2024/11/06 19:31:42 00000000 s (main) Stb boxtype = gigablue
2024/11/06 19:31:42 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 2800
2024/11/06 19:31:42 00000000 s (emu) OSCam-Emu version 802
2024/11/06 19:31:42 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2024/11/06 19:31:42 00000000 s (main) signal handling initialized
2024/11/06 19:31:42 00000000 s (config) 1 service-id's loaded in 1 ms
2024/11/06 19:31:42 00000000 s (net) cccam: initialized (fd=5, port=xxxxxx)
2024/11/06 19:31:42 00000000 s (reader) UM02-1 [internal] creating thread for device /dev/sci0
2024/11/06 19:31:42 00000000 s (reader) UM02-2 [internal] creating thread for device /dev/sci1
2024/11/06 19:31:42 00000000 s (main) waiting for local card init
2024/11/06 19:31:42 4D9BE10A r (reader) UM02-2 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2024/11/06 19:31:42 4D9BE10A r (reader) UM02-2 [internal] Reader sci internal, detected box type: gigablue
2024/11/06 19:31:42 xxxxxxxx r (reader) UM02-1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2024/11/06 19:31:42 xxxxxxxx r (reader) UM02-1 [internal] Reader sci internal, detected box type: gigablue
2024/11/06 19:31:42 1AE9E21B h (webif) HTTP Server running. ip=:: port=xxxxxx
2024/11/06 19:31:43 xxxxxxxx r (reader) UM02-1 [internal] card detected
2024/11/06 19:31:44 xxxxxxxx r (reader) UM02-1 [internal] ATR: 3F
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [internal] detect native nagra card
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [internal] ready for requests
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [internal] found card system nagra
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] ROM: D N A S P 1 4 2
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] REV: R e v G 0 6
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] SER: ############
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] CAID: 1838
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] Prv.ID: 00 00 0x xx (sysid)
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] Prv.ID: 00 00 00 00
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] IRD ID: ############
2024/11/06 19:31:51 xxxxxxxx r (reader) UM02-1 [nagra] active to: 2025/02/01 11:59
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] -----------------------------------------
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] |id |tier |valid from |valid to |
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] +----+--------+------------+------------+
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] |1103|7D27 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E1 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:01 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05EB |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E9 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E2 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05EC |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E0 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05ED |2024/01/30 |2025/02/01 |
2024/11/06 19:32:02 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E4 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:53 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E4 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:53 xxxxxxxx r (reader) UM02-1 [nagra] |1103|05E3 |2024/01/30 |2025/02/01 |
2024/11/06 19:32:53 xxxxxxxx r (reader) UM02-1 [nagra] |1103|000F |2024/01/30 |2025/02/01 |
2024/11/06 19:33:49 299EA723 r (reader) UM02-1 [nagra] -----------------------------------------
2024/11/06 19:36:06 036D7B96 r (reader) UM02-1 [nagra] -----------------------------------------

 

[DarkStarXxX]

Es geht doch überhaupt kein DVBapi User Online, ohne das gibts auch keine Anfrage.

 

[AKGR]

DVBapi ist doch in meine Configs drin ??

 

[Vigor]

Sollte der Reader sci0 genutzt werden, hast du dort einen Eintrag zweimal drin.

nuid = A..........
cak63nuid = A......

nuid löschen.
Den anderen Reader löschen und den dvbapi User auf Group = 1 beschränken.

 

[waves]

Mal den Inhalt der oscam.version posten.

 

[AKGR]

Habe es so gemacht...jetzt auf ein Reader reduziert

(Reader 1 Schacht unten ...war für alte Oscam | Reader 2 mittlere Schacht für neue Oscam)

 

[bubbl]

Oscam bzw deine Box neu starten

 

[Vigor]

Zeig jetzt nach deinen Änderungen noch mal den Inhalt von oscam.server, oscam.conf und oscam.user

 

[AKGR]

Spoiler: oscam.server

[reader]
label = UM02
enable = 1
protocol = internal
device = /dev/sci1
boxkey = A..
rsakey = B..
cak63nuid = A..
cak63cwekey = 2..
mhz = 368
cardmhz = 368
emmcache = 1,3,2
detect = cd
caid = 1838
disablecrccws = 1
group = 1

Spoiler: oscam.user

[account]
user = dvbapi
au = 1
keepalive = 1
group = 1

Spoiler: oscam.conf

[global]
logfile = /logs/oscam.log
emmlogdir = /logs/
nice = -1
maxlogsize = 100
waitforcards = 1

[cccam]
port = xxxxxx
nodeid = 6....
version = 2.3.2
stealth = 1

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox

[webif]
httpport = xxxxx
httpuser = xxx
httppwd = xxx
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
http_status_log = 1

Zwischenzeitlich habe ich auch vom oscam-emu-ipv4onlay(11845...) auf oscam-master (11845..) mit der gleiche Configs gewechselt und neu gestartet.
Leider auch kein Erfolg...und DVBapi wird im Webif nicht angezeigt ??

 

[bubbl]

Starte die Box neu
Zieh den Stecker
Also keine gui etc
Starte die Box komplett neu

 

[AKGR]

Done...passiert immer noch nichts...log file sieht immer noch gleich aus.. obwohl nach starten den sender mehrfach gewechselt wurde..
DVBapi ist nicht zu sehen...
Ich glaube ich spiele die ganze Openatv Software noch einmal ganz Neu auf....

 

[bubbl]

Nimm mal ein anderes Image

 

[waves]

Mal den Inhalt der oscam.version posten.

 

[AKGR]

Spoiler: oscam-emu-ipv4onlay(11845...)

Unix Starttime: 1730923770
Starttime: 06.11.2024 21:09:30
Build Date: 09.10.2024 14:49:06
Version: 2.24.10-11845-802@44d9b86c
Compiler: arm-oe-linux-gnueabi
Box Type: gigablue (generic)
PID: 2819
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-emu/
WebifPort: xxx

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: no
SSL support: yes
DVB API support: yes
DVB API with extended CW API support: yes
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
CW Cycle Check support: no
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: yes
ARM NEON (SIMD/MPE) support: yes
Emulator support: yes
Built-in SoftCam.Key: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: no
serial: no
constant CW: yes
Pandora: no
ghttp: no
Streamrelay: yes
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: no

Spoiler: oscam-master (11845..)

Unix Starttime: 1730923941
Starttime: 06.11.2024 21:12:21
Build Date: 09.10.2024 14:49:06
Version: 2.24.10-11845@44d9b86c
Compiler: arm-oe-linux-gnueabi
Compression: upx 4.2.4, level --best
Box Type: gigablue (generic)
PID: 6023
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-master/
WebifPort: xxxx0

Signature: Valid - successfully verified using built-in Public Key
Signer: OpenSSL 3.3.0 9 Apr 2024
SHA256: 2ea49c5e1f891944f866b4f7fb92c62479bbb1be40a11def12f30a5fc13dd57f
Certificate: Trusted CA Certificate
Subject: CN=OpenATV OSCam Distribution
Issuer: CN=OpenATV OSCam Distribution Root CA
Version: 3
Serial: 58cff732ca6e6f18b6569ab10eeaca9242d5f16c
Fingerprint: 74e515bcd6c2999e31fbf7cc01298a0b717a49df
Valid from: 20.10.2024 10:24:38
Valid to: 20.10.2025 10:24:38
Status: Valid
Type: 256 bit ECDSA Key

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: no
SSL support: yes
DVB API support: yes
DVB API with extended CW API support: no
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
CW Cycle Check support: no
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: yes
ARM NEON (SIMD/MPE) support: yes
Binary signing support: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: no
serial: no
constant CW: yes
Pandora: no
ghttp: no
Streamrelay: yes
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: no

@ bubbl hast du ein vorschlag welches Image ich für die gigablue Quad 4k nehmen sollte ?