Orig.800Se und 800HD Clone Client Sat V13 einrichten

freaky87 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

zwei dateien mit oscam.server? ist das richtig?

freaky87 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

So da ich da mal was ausn nem HowTo hatt eund dann durch neue erstetz habe wollte ich euch den aktuellsten stand mitteilen...

Habe bei meiner Se(späterer Server) Newnigma2 neu geflasht für eine saubere Box > über Blaue Taste geupdatet> Oscam installiert>ccam entfernt>über WinSCP auf die Box zugegriffen>etc>tuxbox
So da ist ein Ordner Namens config und 5 Datein (cables.xml,satelites.xml,scart.conf,terrestrial.xml und timezone.xml)

im Ordner config waren 3 Dateien (oscam.server,oscam.user und oscam.conf)

Ich sollte ja die configs vom link einfügen...da sind es 3 Dateien server-user-dvbapi
also habe ich eine neue datei mit name oscam.dvbapi erstellt und die Datei oscam.conf gelöscht.
Alle daten sind nun eingetragen aber alle sender sind dunkel auser die normalen...

Meine Einstellungen

oscam.dvbapi

P: 09C4
I: 1833
I: 1722
I: 1834
I: 1830
I: 1861
I: 1702
I: 09C7
I: 09AF

oscam.server

[newcamd]
port = 09C4@22560:000000;
serverip = 192.168.178.20
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.254
keepalive = 1
mgclient = 0

[reader]
label = sky
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

oscam.user

[account]
user = dvbapi
pwd =
group = 1
au = sky
caid = 09C4
betatunnel =
suppresscmd08 = 1

ich verzweifel bald :emoticon-0107-sweat

freaky87 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Jetzt habe ich glaube ich ein Fehler von euch gefunden!?!
Im Link von Meister85 um 14:18 steht zweimal oscam.server aber ich glaube das sollte oscam.conf heissen?!? kann das sein?!?

meister85 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

richtig!!!! sorry habe ich auch übersehen!!!!

nimm bitte nochmal die configs aus dem link den ich dir gepostet hab und der ganz obere muss oscam.conf heissen!!

sehr gut aufgepasst

freaky87 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

So ich habe alles geandert und meine oscam.conf sieht wie folgt aus

oscam.conf

[newcamd]
port = 09C4@22560:000000
serverip = 192.168.178.20
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.254
keepalive = 1
mgclient = 0

ich habe meine ip der box eingegeben und allowed geändert weil ich nicht intern share aber sk* bleibt dunkel auf der Se

GTD Bastion · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Poste doch bitte mal ein Log.

freaky87 · 15. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

ein log? wie soll ich das anstellen? bin doch neuling :-(

freaky87 · 18. Juli 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

So hier mal mein Log

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Jul 18 19:17:36 2011
-------------------------------------------------------------------------------
2011/07/18 19:17:36 2AAC6C10 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/07/18 19:17:36 2AAC6C10 s version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux
2011/07/18 19:17:36 2AAC6C10 s client max. idle=120 sec, debug level=0
2011/07/18 19:17:36 2AAC6C10 s max. logsize=unlimited
2011/07/18 19:17:36 2AAC6C10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/18 19:17:36 2AAC6C10 s auth size=4976
2011/07/18 19:17:36 2AAC6C10 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/07/18 19:17:36 2AAC6C10 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/18 19:17:36 2AAC6C10 s signal handling initialized (type=sysv)
2011/07/18 19:17:36 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/07/18 19:17:36 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/07/18 19:17:36 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/07/18 19:17:36 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/07/18 19:17:36 2AAC6C10 s monitor: disabled
2011/07/18 19:17:36 2AAC6C10 s camd33: disabled
2011/07/18 19:17:36 2AAC6C10 s camd35: disabled
2011/07/18 19:17:36 2AAC6C10 s cs378x: disabled
2011/07/18 19:17:36 2AAC6C10 s newcamd: initialized (fd=8, port=9, ip=192.168.178.20, crypted)
2011/07/18 19:17:36 2AAC6C10 s CAID: 2560
2011/07/18 19:17:36 2AAC6C10 s provid #0: 000000
2011/07/18 19:17:36 2AAC6C10 s cccam: initialized (fd=9, port=53589, ip=192.168.178.20, crypted)
2011/07/18 19:17:36 2AAC6C10 s radegast: disabled
2011/07/18 19:17:36 2AAC6C10 s http thread started
2011/07/18 19:17:36 2AAC6C10 s creating thread for device /dev/sci0
2011/07/18 19:17:36 2CE334B0 r reader thread started (thread=2CE334B0, label=sky, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2011/07/18 19:17:36 2C6334B0 h HTTP Server listening on port 8586
2011/07/18 19:17:36 2AAC6C10 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/18 19:17:36 2AAC6C10 s waiting for local card init
2011/07/18 19:17:37 2AAC6C10 s init for all local cards done
2011/07/18 19:17:37 2AAC6C10 s anti cascading disabled
2011/07/18 19:17:37 2D7FF4B0 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2011/07/18 19:17:37 2D7FF4B0 c dvbapi: 9 entries read from oscam.dvbapi
2011/07/18 19:17:41 2D7FF4B0 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1AAA PROVID: 000000
2011/07/18 19:17:41 2D7FF4B0 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2011/07/18 19:17:41 2D7FF4B0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2011/07/18 19:17:41 2D7FF4B0 c dvbapi: new program number: EF15 (1830:EF15 unknown)
2011/07/18 19:17:41 2D7FF4B0 c dvbapi (09C4&000000/EF15/58:8F28): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:17:42 2D7FF4B0 c dvbapi: try pids again #1
2011/07/18 19:17:42 2D7FF4B0 c dvbapi (1843&000000/EF15/89:4F4D): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:17:42 2D7FF4B0 c dvbapi (09C4&000000/EF15/58:8F28): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:17:42 2D7FF4B0 c dvbapi: try pids again #2
2011/07/18 19:17:42 2D7FF4B0 c dvbapi (1843&000000/EF15/89:4F4D): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:17:42 2D7FF4B0 c dvbapi (09C4&000000/EF15/58:8F28): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:17:42 2D7FF4B0 c dvbapi: try pids again #3
2011/07/18 19:17:42 2D7FF4B0 c dvbapi: can't decode channel
2011/07/18 19:17:42 2D7FF4B0 c dvbapi (1843&000000/EF15/89:4F4D): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:18:00 0 exit with signal 15

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Jul 18 19:18:42 2011
-------------------------------------------------------------------------------
2011/07/18 19:18:42 2AAC6C10 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/07/18 19:18:42 2AAC6C10 s version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux
2011/07/18 19:18:42 2AAC6C10 s client max. idle=120 sec, debug level=0
2011/07/18 19:18:42 2AAC6C10 s max. logsize=unlimited
2011/07/18 19:18:42 2AAC6C10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/18 19:18:42 2AAC6C10 s auth size=4976
2011/07/18 19:18:42 2AAC6C10 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/07/18 19:18:42 2AAC6C10 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/18 19:18:42 2AAC6C10 s signal handling initialized (type=sysv)
2011/07/18 19:18:42 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/07/18 19:18:42 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/07/18 19:18:42 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/07/18 19:18:42 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/07/18 19:18:42 2AAC6C10 s monitor: disabled
2011/07/18 19:18:42 2AAC6C10 s camd33: disabled
2011/07/18 19:18:42 2AAC6C10 s camd35: disabled
2011/07/18 19:18:42 2AAC6C10 s cs378x: disabled
2011/07/18 19:18:42 2AAC6C10 s newcamd: initialized (fd=7, port=9, ip=192.168.178.20, crypted)
2011/07/18 19:18:42 2AAC6C10 s CAID: 2560
2011/07/18 19:18:42 2AAC6C10 s provid #0: 000000
2011/07/18 19:18:42 2AAC6C10 s cccam: initialized (fd=8, port=53589, ip=192.168.178.20, crypted)
2011/07/18 19:18:42 2AAC6C10 s radegast: disabled
2011/07/18 19:18:42 2AAC6C10 s http thread started
2011/07/18 19:18:42 2AAC6C10 s creating thread for device /dev/sci0
2011/07/18 19:18:43 2AAC6C10 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/18 19:18:43 2AAC6C10 s waiting for local card init
2011/07/18 19:18:43 2CE334B0 r reader thread started (thread=2CE334B0, label=sky, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2011/07/18 19:18:43 2C6334B0 h HTTP Server listening on port 8586
2011/07/18 19:18:43 2AAC6C10 s init for all local cards done
2011/07/18 19:18:43 2AAC6C10 s anti cascading disabled
2011/07/18 19:18:43 2D6334B0 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2011/07/18 19:18:43 2D6334B0 c dvbapi: 9 entries read from oscam.dvbapi
2011/07/18 19:19:10 2D6334B0 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1AAA PROVID: 000000
2011/07/18 19:19:10 2D6334B0 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2011/07/18 19:19:10 2D6334B0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2011/07/18 19:19:10 2D6334B0 c dvbapi: new program number: EF15 (1830:EF15 unknown)
2011/07/18 19:19:10 2D6334B0 c dvbapi (09C4&000000/EF15/58:306C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:19:10 2D6334B0 c dvbapi: try pids again #1
2011/07/18 19:19:10 2D6334B0 c dvbapi (1843&000000/EF15/89:99BF): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:19:10 2D6334B0 c dvbapi (09C4&000000/EF15/58:306C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:19:10 2D6334B0 c dvbapi: try pids again #2
2011/07/18 19:19:10 2D6334B0 c dvbapi (1843&000000/EF15/89:99BF): rejected caid (1 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:19:11 2D6334B0 c dvbapi (09C4&000000/EF15/58:306C): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:19:11 2D6334B0 c dvbapi: try pids again #3
2011/07/18 19:19:11 2D6334B0 c dvbapi: can't decode channel
2011/07/18 19:19:11 2D6334B0 c dvbapi (1843&000000/EF15/89:99BF): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:21:08 2D6334B0 c dvbapi: new program number: 27B6 (0000:27B6 unknown)
2011/07/18 19:21:12 2D6334B0 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1AAA PROVID: 000000
2011/07/18 19:21:12 2D6334B0 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2011/07/18 19:21:12 2D6334B0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2011/07/18 19:21:12 2D6334B0 c dvbapi: new program number: EF15 (1830:EF15 unknown)
2011/07/18 19:21:12 2D6334B0 c dvbapi (09C4&000000/EF15/58:A735): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:21:12 2D6334B0 c dvbapi: try pids again #1
2011/07/18 19:21:12 2D6334B0 c dvbapi (1843&000000/EF15/89

8A7): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:21:13 2D6334B0 c dvbapi (09C4&000000/EF15/58:A735): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:21:13 2D6334B0 c dvbapi: try pids again #2
2011/07/18 19:21:13 2D6334B0 c dvbapi (1843&000000/EF15/89

8A7): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)
2011/07/18 19:21:13 2D6334B0 c dvbapi (09C4&000000/EF15/58:A735): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/07/18 19:21:13 2D6334B0 c dvbapi: try pids again #3
2011/07/18 19:21:13 2D6334B0 c dvbapi: can't decode channel
2011/07/18 19:21:13 2D6334B0 c dvbapi (1843&000000/EF15/89

8A7): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1843)

qx08635 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Vielleicht könnt Ihr ja mir solange weiter helfen an dieser Stelle? Das wäre echt super!!
Szenario:
Server: 800SE (Clone) mit CCCAM/OSCAM mit V13
Client: CCCAM

Clients authentifizieren sich augenscheinlich erfolgreich am Server, allerdings kommt eine "rejected user ident" bzw. "no card support 09C4:1F1F1F) (siehe letzte log-Zeile) und Bild bleibt natürlich dunkel. Die Spalte "LB Value/ Reader" im OSCAM-WebIF zeigt ein "by invalid (0s)" an, wo sonst ein (in meinem Fall) "by sky" stehen müsste. Hätte da jemand eine Idee?
Anbei die Dateien, die cccam.cfg lasse ich jezt mal weg...

oscam.cfg

Code:

[global]
nice = -1
preferlocalcards = 1
saveinithistory = 1

[newcamd]
port = 26838@09C4:000000
key = 0102030405060708091011121314
serverip = 192.168.91.15
allowed =  0.0.0.0-255.255.255.254

oscam.server

Code:

[reader]
label = sky
enable = 1
protocol = internal
device = /dev/sci0
caid = 09c4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

oscam.user

Code:

[account]
user                          = Mischen
pwd                           = pw1
group                         = 1
au                            = 1

user                          = Meister
pwd                           = pw2
group                         = 1
au                            = 1

log

Code:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Sep 21 14:29:25 2011
-------------------------------------------------------------------------------
2011/09/21 14:29:25 2AAC6C10 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/09/21 14:29:25 2AAC6C10 s version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux, nice=-1
2011/09/21 14:29:25 2AAC6C10 s client max. idle=120 sec, debug level=0
2011/09/21 14:29:25 2AAC6C10 s max. logsize=unlimited
2011/09/21 14:29:25 2AAC6C10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/21 14:29:25 2AAC6C10 s auth size=4976
2011/09/21 14:29:25 2AAC6C10 s services reloaded: 0 services freed, 1 services loaded
2011/09/21 14:29:25 2AAC6C10 s userdb reloaded: 17 accounts loaded, 0 expired, 0 disabled
2011/09/21 14:29:25 2AAC6C10 s signal handling initialized (type=sysv)
2011/09/21 14:29:25 2AAC6C10 s 772 service-id's loaded
2011/09/21 14:29:25 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/21 14:29:25 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/21 14:29:25 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/21 14:29:25 2AAC6C10 s monitor: disabled
2011/09/21 14:29:25 2AAC6C10 s camd33: disabled
2011/09/21 14:29:25 2AAC6C10 s camd35: disabled
2011/09/21 14:29:25 2AAC6C10 s cs378x: disabled
2011/09/21 14:29:25 2AAC6C10 s newcamd: initialized (fd=8, port=26838, ip=192.168.91.15, crypted)
2011/09/21 14:29:25 2AAC6C10 s CAID: 09C4
2011/09/21 14:29:25 2AAC6C10 s provid #0: 1F1F1F
2011/09/21 14:29:25 2AAC6C10 s cccam: disabled
2011/09/21 14:29:25 2AAC6C10 s radegast: disabled
2011/09/21 14:29:25 2AAC6C10 s http thread started
2011/09/21 14:29:25 2AAC6C10 s creating thread for device /dev/sci0
2011/09/21 14:29:25 2AAC6C10 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/21 14:29:25 2AAC6C10 s waiting for local card init
2011/09/21 14:29:25 2BE334B0 h HTTP Server listening on port 16102
2011/09/21 14:29:25 2C6334B0 r reader thread started (thread=2C6334B0, label=sky, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/09/21 14:29:25 2C6334B0 r sky card detected
2011/09/21 14:29:26 2C6334B0 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 
2011/09/21 14:29:27 2C6334B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] parental lock setting: FF FF FF FF 
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] type: VideoGuard Sky Germany, caid: 09C4
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] serial: XXXXXXXX, BoxID: 12345678, baseyear: 1997
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] ready for requests
2011/09/21 14:29:29 2C6334B0 r found cardsystem videoguard2
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] sky card detected
2011/09/21 14:29:29 2C6334B0 r [videoguard2-reader] type: VideoGuard Sky Germany
2011/09/21 14:29:31 2BE334B0 h Reader sky stats resetted by WebIF from 192.168.91.2
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 005a, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 007b, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 007d, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 0081, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 008e, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 00c0, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:33 2C6334B0 r [videoguard2-reader] tier: 00c7, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00c8, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00c9, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00ca, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00cb, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00f3, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00fa, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:34 2C6334B0 r [videoguard2-reader] tier: 00ff, expiry date: 2004/12/14-00:01:00 
2011/09/21 14:29:40 2AAC6C10 s init for all local cards done
2011/09/21 14:29:40 2AAC6C10 s anti cascading disabled
2011/09/21 14:29:40 2E6854B0 c client connected to 26838 port
2011/09/21 14:29:40 2DE854B0 c client connected to 26838 port
2011/09/21 14:29:40 2D6854B0 c client connected to 26838 port
2011/09/21 14:29:40 2E6854B0 c Connection closed to client
2011/09/21 14:29:40 2CE854B0 c client connected to 26838 port
2011/09/21 14:29:40 2E6854B0 c thread 2E6854B0 ended!
2011/09/21 14:29:40 2F6854B0 c client connected to 26838 port
2011/09/21 14:29:40 2DE854B0 c Connection closed to client
2011/09/21 14:29:40 2FE854B0 c client connected to 26838 port
2011/09/21 14:29:40 2CE854B0 c Connection closed to client
2011/09/21 14:29:40 2EE854B0 c client connected to 26838 port
2011/09/21 14:29:40 2D6854B0 c Connection closed to client
2011/09/21 14:29:40 2DE854B0 c thread 2DE854B0 ended!
2011/09/21 14:29:40 2FE854B0 c Connection closed to client
2011/09/21 14:29:40 2CE854B0 c thread 2CE854B0 ended!
2011/09/21 14:29:40 2EE854B0 c Connection closed to client
2011/09/21 14:29:40 30E854B0 c client connected to 26838 port
2011/09/21 14:29:40 306854B0 c client connected to 26838 port
2011/09/21 14:29:40 2D6854B0 c thread 2D6854B0 ended!
2011/09/21 14:29:40 328854B0 c client connected to 26838 port
2011/09/21 14:29:40 316854B0 c client connected to 26838 port
2011/09/21 14:29:40 2CE854B0 c client connected to 26838 port
2011/09/21 14:29:40 2FE854B0 c thread 2FE854B0 ended!
2011/09/21 14:29:40 2F6854B0 c Connection closed to client
2011/09/21 14:29:40 31E854B0 c client connected to 26838 port
2011/09/21 14:29:40 2EE854B0 c thread 2EE854B0 ended!
2011/09/21 14:29:40 2F6854B0 c thread 2F6854B0 ended!
2011/09/21 14:29:40 306854B0 c Connection closed to client
2011/09/21 14:29:40 306854B0 c thread 306854B0 ended!
2011/09/21 14:29:40 30E854B0 c Connection closed to client
2011/09/21 14:29:40 30E854B0 c thread 30E854B0 ended!
2011/09/21 14:29:40 316854B0 c Connection closed to client
2011/09/21 14:29:40 316854B0 c thread 316854B0 ended!
2011/09/21 14:29:40 31E854B0 c Connection closed to client
2011/09/21 14:29:40 31E854B0 c thread 31E854B0 ended!
2011/09/21 14:29:40 328854B0 c Connection closed to client
2011/09/21 14:29:40 328854B0 c thread 328854B0 ended!
2011/09/21 14:29:40 2CE854B0 c encrypted newcamd:26838-client CLIENTIP granted (Meister, au=auto (1 reader))
2011/09/21 14:29:40 2CE854B0 c user Meister authenticated successfully (CCcam)
2011/09/21 14:29:40 2CE854B0 c AU disabled for user Meister
2011/09/21 14:29:41 328854B0 c client connected to 26838 port
2011/09/21 14:29:50 306854B0 c encrypted newcamd:26838-client CLIENTIP granted (Mischen, au=auto (1 reader))
2011/09/21 14:29:50 306854B0 c user Mischen authenticated successfully (CCcam)
2011/09/21 14:29:50 306854B0 c AU disabled for user Mischen
2011/09/21 14:29:50 2D6854B0 c client connected to 26838 port
...
...
...
2011/09/21 14:42:37 2CE854B0 c Meister (09C4&1F1F1F/000A/90:55C7): rejected user ident (0 ms) (of 0 avail 0) (no card support 09C4:1F1F1F)
2011/09/21 14:42:39 306854B0 c Mischen (09C4&1F1F1F/0011/46:EF85): rejected user ident (0 ms) (of 0 avail 0) (no card support 09C4:1F1F1F)

meister85 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Sind es es externe User? Hast du den eine N-Line oder C-Line gegeben?

qx08635 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Sorry, dass ich es nicht erwähnt habe... Mischen ist intern, Meister extern... beide mit N-Lines in den cccam.cfg's! Beispeilhaft sehen die so aus:

Code:

N: dyndns-addresse 26838 Meister pw2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Danke dir,
QX

meister85 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Hast du Services vergeben? Eventuell mal den User ein Caid zuordnen und schauen ob es klappt! Beispiel so:

[account]
user = Mischen
pwd = pw1
group = 1
au = 1
caid = 09c4

ps. Bei Meister fehlt das [account] in der oscam.user

qx08635 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Mit der caid habe ich es auch schon versuch, vergeblich.
Jepp, hatte [account] wohl nicht mit kopiert, steht aber bei allen accounts drin.

Ehrlich, ich bin schon so weit, dass ich einen Hardware-Fehler vermute oder ein Problem mit dem Image "newnigma2-exp-dm800se-2011-08-03-18-19.nfi" :|

meister85 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

Das schließe ich aus, da die Karte ja gelesen wird. Nutzt du oscam.services?

Nimm mal bitte die serverip und allowed aus der oscam.conf raus und machst dann bitte ein oscam restart!

qx08635 · 21. September 2011

AW: Orig.800Se und 800HD Clone Client Sat V13 einrichten

ip+allowed raus hat leider nichts gebracht.

Services? Die liegt im config-Ordner, ja, aber nutze sie nicht, zumindest nicht bewusst. Wird die automatisch verwertet, sobald sie da ist?

oscam.services

Code:

[sky]
caid=09c4,1702,1833
srvid=000A,000B,002B,0029,0009,0014,0204,0008,0203 ,0019,002a,0010,0024,0017,0032,001d,001b,0022,001c ,0013,001a,000e,000d,000c,00a8,0206,0016,0018,0034 ,0015,003c,003d,0040,4461,4462,003f,003e,3393,0042 ,2EFE,700A,0044,07FF ,0043,6ff1,7009,3331,3395,0035,0083,007e,0082,0080 ,007f,0081,0084,007a,007b,007c,00fb,0105,010f,0119 ,0123,012d,0137,0141,014b,0015,0201,0159,0163,016d ,0046,0011,00dd,00de,00fd,014d,0143,0139,012f,0125 ,011b,0107,0111,016b,0175,00df,0106,0110,2011a,012 4,012e,0138,0142,014 c,0156,0160,00fc,000f,0075,0096,0097,0098,0099,009 A,009B,009C,0077

Suche

Suche

Orig.800Se und 800HD Clone Client Sat V13 einrichten

freaky87

Ist oft hier

freaky87

Ist oft hier

freaky87

Ist oft hier

meister85

freaky87

Ist oft hier

GTD Bastion

freaky87

Ist oft hier

freaky87

Ist oft hier

qx08635

Newbie

meister85

qx08635

Newbie

meister85

qx08635

Newbie

meister85

qx08635

Newbie

Ähnliche Themen

Spenden Unterstützung