#!/bin/sh
#
# 08.2010
#
## Changelog:
#
# v0.51 added feature to display CCcam's log in realtime...
# code cleanups...
#
# v0.50 added editor mode for config files (it uses nano if installed else vi)
# added support for rar -> if installed backuplogs gets packed with -m5
# readded old and still supported cmds...
# added /var/log/kern.log (or any other?) to get backuped on crash
# fixed script-config-checks...
# fixed connection failed handling of nc...
# optimized code...
#
# v0.44: added $CCcamLOG as CCcam-output-log filename
# added another script-config-checks...
#
# v0.43: added BACKUPCARDCHECK to make backups of logfiles on crash
# removed RESPONDCHECK coz DETECTCHECK does the same (but its still useable)
#
# v0.42: added check for "detected and working cards"
# added /tmp/CCcamCheck.lock file so the script cant run twice
#
# v0.41: added '-i 1' to respond/detected checks as NCINTERVAL
# changed script syntax for cronjob to: check auto
# added misc stuff like script-config-checks etc...
#
# v0.40: added RESPONDCHECK
# added ENABLECOLORS
# fixed start_cam
#
#
## Recommended HowTo:
#
#
# ! -> ITS VERY IMPORTEND THAT YOU D O N T FORWARD ANY OTHER PORTS
# ! -> EXCEPT CCCAM-SERVER-LISTEN-PORT OUTSIDE YOUR LAN !!
# ! -> YOU SHOULD ALSO CHANGE A L L DEFAULT PORTS !!
#
#
# Add a new shell user and install there your CCcam:
#
# useradd -m -s/bin/bash CS
# usermod -G dialout,adm -a CS
# su - CS
# mkdir -p CCcam/bin CCcam/logs CCcam/etc
#
# Copy your files as followed: (inc. this script as: cccam)
#
# CCcam/
# cccam
#
# CCcam/etc:
# CCcam.cfg CCcam.channelinfo CCcam.providers SoftCam.Key AutoRoll.Key constant.cw
#
# CCcam/bin:
# CCcam.211.x86
#
# Make the CCcam binary and my script executable..
#
# chmod 700 CCcam/cccam CCcam/bin/CCcam.211.x86
#
# Change the following in your CCcam.cfg:
#
# TELNETINFO USERNAME :
# TELNETINFO PASSWORD :
# TELNETINFO LISTEN PORT : 16000
# SOFTKEY FILE : /home/CS/CCcam/etc/SoftCam.Key
# AUTOROLL FILE : /home/CS/CCcam/etc/AutoRoll.Key
# STATIC CW FILE : /home/CS/CCcam/etc/constant.cw
# CAID PRIO FILE : /home/CS/CCcam/etc/CCcam.prio
# PROVIDERINFO FILE : /home/CS/CCcam/etc/CCcam.providers
# CHANNELINFO FILE : /home/CS/CCcam/etc/CCcam.channelinfo
# LOG WARNINGS : /home/CS/CCcam/logs/warnings.log
#
# Add some cronjob entry so CCcam gets started on reboot and gets checked every 2 minutes:
#
# echo "@reboot $HOME/CCcam/cccam start >/dev/null 2>&1" >> $HOME/.cron
# echo "*/2 * * * * $HOME/CCcam/cccam check auto >/dev/null 2>&1" >> $HOME/.cron
# crontab $HOME/.cron
#
#
# NOTES:
#
# - i recommend to use */2 !
# */2 means every 2 minutes (eg.: 12:00, 12:02, 12:04, 12:06, 12:08, 12:10, 12:12...)
# set it only to * means every minute
#
# - if you want to run more than one CCcam-server:
# cp -r CCcam CCcam2 ... rename the binary (eg: CCcam.211.x86_2)
# reconfigure this script and your new CCcam.cfg
#
# - COMP is used to choose the compression type to be used, options are: tar or rar
# rar will produce slightly smaller files but is more processor intensive so
# may take longer to complete.
#
#
# ...Feel free to change the paths...
# ...which depends on your receiver/image/system...
#
#
### CONFIG - START
# Enable colored output-lines on shell? [yes/no]
ENABLECOLORS="yes"
# Path where the CCcam binary lies, no trailing / [CCcam-default: /var/emu]
CCcamPATH="/home/CS/CCcam/bin"
# Name of the CCcam binary [CCcam-default: cccam]
CCcamBIN="CCcam.211.x86"
# Path to save the CCcam logs to, no trailing / [CCcam-default: /tmp]
CCcamPLOG="/home/CS/CCcam/logs"
# Inside $CCcamPLOG the CCcam-output-log is saved to which file?
CCcamLOG="$CCcamPLOG/log.CCcam"
# Enable above CCcam-output-log? [yes/no]
# NOTE: its growing, and growing...UP in SIZE if you have much peers! but good to debug!
enableLOG="yes"
# Inside $CCcamPLOG we save the crontabed checks to which file?
CCcamCLOG="check.CCcam.log"
# Complete /path/to/file of your CCcam.cfg [CCcam-default: /var/etc/CCcam.cfg]
CCcamCFG="/home/CS/CCcam/etc/CCcam.cfg"
# Options to start CCcam with [CCcam-default: <none>]
# NOTE: DON'T edit unless you know what you are doing!
# NOTE: im using -d to save CCcam's output into a logfile so dont add it again please
CCcamOPTIONS="-t"
# CCCam-IP of your CCcam-Server for respond-checks (normaly: localhost/127.0.0.1)
# NOTE: you need to set this for DETECTCHECK
CCCAMIP="127.0.0.1"
# TELNETINFO-LISTEN-PORT of your CCcam-Server for respond-checks [CCcam-default: 16000]
# NOTE: you need to set this for DETECTCHECK
TELNETPORT="16000"
# Enable "detected and working cards"-check ? [yes/no]
DETECTCHECK="yes"
# For Card-Detected-Check, what is the FIRST word of your card? [Betacrypt/Viaccess/Nds]
# (currently only one identical cardname supported!)
CARDNAME="Betacrypt"
# How many identical cards your using with this CCcam?
CARDNUM="2"
# Create backups from logs of above card-check if it failed ? [yes/no]
BACKUPCARDCHECK="yes"
# Should we backup also another system-log-file for debugging?
# setting this to "" to disable or add more files seperated by space
BACKUPSYSLOGFILELIST="/var/log/kern.log"
# Choose Compression type. (tar or rar)
COMP="tar"
# delay interval for lines sent (for responding check) [default: <empty>]
# NOTE: DON'T edit unless you know what you are doing!
# NOTE: if your CCcam-server runs on an 1xChip dbox its possible that the
# respond-check tooks too long for this script. Than you need to set
# this to '-i 3' or '-i 4'... it waits longer befor quitting and fail...
NCINTERVAL="-i 2"
# default System's binary paths to locate nano and rar, no trailing /
# NOTE: DON'T edit unless you know what you are doing!
SYSTEMbinPATHS="/bin /usr/bin"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
DATE=`date`
DOW=`date +%A` # Day of the week e.g. Monday
DNOW=`date +%u` # Day number of the week 1 to 7 where 1 represents Monday
DOM=`date +%d` # Date of the Month e.g. 27
M=`date +%B` # Month e.g January
W=`date +%V` # Week Number e.g 37
VER="0.51"
CHECKFILE="/tmp/cccamtest.log"
tmpCARDNUM="0"
#fixme:
#LogRotate() {
# Weekly Backup
#if [ $DNOW = $DOWEEKLY ]; then
#echo Weekly Backup
#echo
#echo Rotating last weeks Backup...
#if [ "$W" -le 05 ];then
#REMW=`expr 48 + $W`
#elif [ "$W" -lt 15 ];then
#REMW=0`expr $W - 5`
#else
#REMW=`expr $W - 5`
#fi
#eval rm -fv "$REMW.*"
#}
if [ -z "$ENABLECOLORS" ]; then
## Read script-config
if [ -z $scriptconfig ]; then
scriptconfig="`dirname $0`/Checkcccam.conf"
fi
if [ ! -r $scriptconfig ]; then
echo "ERROR: Cant read $scriptconfig"
exit 0
else
. $scriptconfig
fi
fi
if [ -z "$CCcamCFG" ]; then
CCcamCFG="/var/etc/CCcam.cfg"
fi
if [ "$SYSTEMbinPATHS" = "" ] && [ ! -z "$PATH" ]; then
SYSTEMbinPATHS=$PATH
fi
if [ "$ENABLECOLORS" = "yes" ]; then
ROT=`tput setaf 1`
GRUEN=`tput setaf 2`
BOLD=`tput bold`
NORM='tput op && tput sgr0'
else
ROT="" ; GRUEN="" ; BOLD="" ; NORM=""
fi
# This methode deletes old and creates an new logfile for CCcam on re/start
create_new_log() {
if [ ! -e $CCcamLOG ]; then
touch $CCcamLOG
else
mv -f $CCcamLOG ${CCcamLOG}.old
touch $CCcamLOG
fi
}
# This method starts CCcam
start_cam() {
if ps x |grep -v grep |grep -c $CCcamBIN >/dev/null 2>&1
then
echo $ROT "ERROR: $CCcamBIN still runs with pid: $(pidof $CCcamBIN)" ; $NORM
else
if [ -f "/tmp/.CCcam.nodeid"]; then
rm -f /tmp/.CCcam.nodeid
fi
cd $CCcamPATH
if [ "$enableLOG" = "yes" ]; then
create_new_log
./$CCcamBIN $CCcamOPTIONS -d -C $CCcamCFG >>$CCcamLOG 2>&1 &
else
./$CCcamBIN $CCcamOPTIONS -q -C $CCcamCFG &
fi
echo $GRUEN "Successfully started CCcam with pid: $(pidof $CCcamBIN)" ; $NORM
fi
}
# This method stops CCcam
stop_cam() {
PiD=$(pidof $CCcamBIN)
if [ -z "$PiD" ]; then
echo $ROT "ERROR: Cant see $CCcamBIN to stop..." ; $NORM
else
echo $GRUEN "Stopping CCcam with pid: $PiD" ; $NORM
kill -9 $PiD
fi
}
# This method checks for running process, detected and working cards and restarts if not...
check_run() {
if ps x |grep -v grep |grep -c $CCcamBIN >/dev/null
then
echo $GRUEN "Seems CCcam still runs with pid: $(pidof $CCcamBIN)" ; $NORM
if [ "$DETECTCHECK" = "yes" ]; then
sleep 1 ; check_cards
fi
else
echo "["$DATE"] BAD - Couldn't see $CCcamBIN running. Starting!" >> $CCcamPLOG/$CCcamCLOG
echo $ROT "Couldn't see $CCcamBIN running. Starting!" ; $NORM
start_cam
fi
}
# This method checks detected and working cards and restarts if not...
check_cards() {
echo "...Checking if all CCcam '$CARDNAME' cards are presend"
echo entitlements|nc $NCINTERVAL $CCCAMIP $TELNETPORT > $CHECKFILE
if [ "$?" != "0" ]; then
echo $ROT "ERROR while connecting to CCcam Server!" ; $NORM
echo "["$DATE"] BAD - ERROR while connecting to CCcam Server!" >> $CCcamCLOG
proc_exit
fi
CardDetect=$(grep -w $CARDNAME $CHECKFILE)
tmpCARDNUM=$(grep -c $CARDNAME $CHECKFILE)
if [ "$tmpCARDNUM" = "$CARDNUM" ]; then
echo $GRUEN " OK - $tmpCARDNUM Cards are shown in entitlements!"; $NORM
echo "$CardDetect"
else
echo "["$DATE"] BAD - Only $tmpCARDNUM/$CARDNUM Cards detected! Restarting CCcam: $CCcamBIN" >> $CCcamCLOG
echo $ROT " BAD - Only $tmpCARDNUM/$CARDNUM Cards detected! Restarting CCcam: $CCcamBIN"; $NORM
if [ "$BACKUPCARDCHECK" = "yes" ]; then
echo " Creating backup from logs: $CCcamPLOG/$CBFILE"
echo "["$DATE"] Created backup from logs: $CCcamPLOG/$CBFILE" >> $CCcamCLOG
$PACKAGER $CHECKFILE $CCcamLOG $BACKUPSYSLOGFILELIST > $CCcamPLOG/$CBFILE
sleep 1
fi
stop_cam
sleep 10
start_cam
fi
rm -f $CHECKFILE
}
# This method checks if CCcam still responding like it should
check_respond() {
process=`ps auxwww | grep $CCcamBIN | grep -v grep | awk '{print $1}'`
if [ -z "$process" ]; then
echo $ROT " BAD - Couldn't find $CCcamBIN running. Restarting!"; $NORM
echo "["$DATE"] BAD - Couldn't find $CCcamBIN running. Restarting!" >> $CCcamPLOG/$CCcamCLOG
start_cam
else
echo $GRUEN "CCcam process is present, now checking if CCcam is frozen"; $NORM
# minimize Logfile size
LASTLINECHECK=`tail -n1 $CCcamPLOG/$CCcamCLOG | grep "now checking if CCcam is frozen"`
if [ -z "$LASTLINECHECK" ]; then
echo "CCcam process is present, now checking if CCcam is frozen" >> $CCcamPLOG/$CCcamCLOG
fi
echo info|nc $NCINTERVAL $CCCAMIP $TELNETPORT > $CHECKFILE
if [ "$?" != "0" ]; then
echo $ROT "ERROR while connecting to CCcam Server!" ; $NORM
echo "["$DATE"] BAD - ERROR while connecting to CCcam Server!" >> $CCcamPLOG/$CCcamCLOG
rm -f $CHECKFILE ; proc_exit
fi
CHECKED=$(ls -s $CHECKFILE)
if [ "$CHECKED" = "0" ]; then
echo $ROT " BAD - CCcam is frozen, restarting CCcam: $CCcamBIN"; $NORM
echo "["$DATE"] BAD - CCcam is frozen, restarting CCcam" >> $CCcamPLOG/$CCcamCLOG
stop_cam
sleep 10
start_cam
else
echo $GRUEN " OK - CCcam is responding like it should!"; $NORM
# FixMe: output responding to shell if its NOT triggered: check auto
if [ ! "$2" = "auto" ]; then
echo "CCcam responding:"
echo $(cat $CHECKFILE)
fi
# minimize Logfile size
LASTLINECHECK=`tail -n1 $CCcamPLOG/$CCcamCLOG | grep "CCcam is responding like it should"`
if [ -z "$LASTLINECHECK" ]; then
echo "["$DATE"] OK - CCcam is responding like it should" >> $CCcamPLOG/$CCcamCLOG
fi
fi
rm -f $CHECKFILE
fi
}
# This method watches the $CCcamLOG in realtime...
monitor_log() {
if [ ! -e "$CCcamLOG" ]; then
echo $ROT "ERROR: Cant find CCcam log $CCcamLOG ... Is it enabled?" ; $NORM
else
echo " "
echo $BOLD "Starting monitoring of $CCcamLOG in realtime. Hit [STRG] + [C] to abort!" ; $NORM
echo " "
sleep 1
tail -f $CCcamLOG
proc_exit
fi
}
proc_Get_Packager() {
unset PACKAGER
CBFNOW=$(date +"%d.%m.%Y_%H%M")
for Spath in $SYSTEMbinPATHS ; do
if [ -x $Spath/rar ]; then
PACKAGER="$Spath/rar a -inul -tk -m5 -y"
CBFILE="backup_checklog__$CBFNOW.rar"
fi
done
if [ -z "$PACKAGER" ]; then
PACKAGER="tar -czp"
CBFILE="backup_checklog__$CBFNOW.tgz"
fi
}
proc_Get_Editor() {
unset UseEDITOR
for Spath in $SYSTEMbinPATHS ; do
if [ -x "$Spath/nano" ]; then
UseEDITOR="$Spath/nano -R"
fi
done
if [ -z "$UseEDITOR" ]; then
for Spath in $SYSTEMbinPATHS ; do
if [ -x "$Spath/vi" ]; then
UseEDITOR="$Spath/vi"
fi
done
fi
if [ -z "$UseEDITOR" ]; then
echo $ROT "ERROR: Unable to locate Editor to open file - Be sure SYSTEMbinPATHS is set currectly!" ; $NORM
proc_exit
fi
}
# edit files given from $1
edit_file() {
case "$1" in
conf*)
EFILE="$CCcamCFG"
if test -f $EFILE ; then
echo "Opening file: $EFILE ... with: $UseEDITOR"
sleep 1 ; $UseEDITOR $EFILE
else
echo -e "\033[1;31mError opening file: $EFILE !\033[0m"
fi
;;
*)
echo "err... $*"
;;
esac
}
proc_Find_CCcamBIN() {
CCCAMbinLIST=""
if [ ! -z "$CCcamPATH" ]; then
CPfilelist=$(ls $CCcamPATH)
for Cfile in $CPfilelist ; do
if [ "$Cfile" = "[cC][cC][cC][aA][mM]*" ]; then
CCCAMbinLIST="$CCCAMbinLIST $Cfile"
fi
done
fi
}
proc_exit() {
rm -f "/tmp/CCcamCheck.lock"
exit 0
}
if [ -e "/tmp/CCcamCheck.lock" ]; then
if [ "`find \"/tmp/CCcamCheck.lock\" -type f -mmin -5`" ]; then
echo "Lockfile /tmp/CCcamCheck.lock exists and is not 5 minutes old yet. Quitting!"
exit 0
else
echo "Lockfile exists, but its older then 5 minutes. Removing lockfile."
touch "/tmp/CCcamCheck.lock"
fi
else
touch "/tmp/CCcamCheck.lock"
fi
## script-config checks...
if [ ! -d "$CCcamPLOG" ]; then
echo $ROT "ERROR: Directory $CCcamPLOG does not exist - Check paths and permissions!" ; $NORM
proc_exit
fi
if [ ! -w "$CCcamPLOG/$CCcamCLOG" ]; then
echo $ROT "ERROR: Can not write to $CCcamPLOG/$CCcamCLOG - Check paths and perms!" ; $NORM
proc_exit
fi
if [ ! -e $CCcamPATH/$CCcamBIN ]; then
echo $ROT "ERROR: Can not find CCcam binary: $CCcamPATH/$CCcamBIN - Check paths and perms!" ; $NORM
proc_exit
fi
if [ ! -e $CCcamPLOG/$CCcamCLOG ]; then
touch $CCcamPLOG/$CCcamCLOG
fi
# read configs ((c) SEG74)
proc_Get_CCcamcfg() {
CCUSER=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
CCPASS=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
CCPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
CCTPORT=$(grep -i "TELNETINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
CCTUSER=$(grep -i "TELNETINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
CCTPASS=$(grep -i "TELNETINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
#echo "CCUSER: $CCUSER"; echo "CCPASS: $CCPASS"; echo "CCPORT: $CCPORT"
#echo "CCTUSER: $CCTUSER"; echo "CCTPASS: $CCTPASS"; echo "CCTPORT: $CCTPORT"
}
proc_Get_CCcamcfg
if [ "$DETECTCHECK" = "yes" -a "$TELNETPORT" != "" -a "$CCTPORT" != "" ]; then
if [ ! "$TELNETPORT" = "$CCTPORT" ]; then
echo $ROT "ERROR: Your script-config isnt the same as your CCcam configuration!"
echo "Your script setting: $TELNETPORT ... But in your CCcam.cfg is TELNETINFO-port: $CCTPORT"; $NORM
proc_exit
fi
proc_Get_Packager
fi
case "$1" in
start)
echo "[SCRIPT] $1:"
start_cam
;;
stop)
echo "[SCRIPT] $1:"
stop_cam
;;
restart)
echo "[SCRIPT] $1:"
stop_cam
sleep 10
start_cam
;;
check)
echo "[SCRIPT] $1:"
check_run
;;
card*)
echo "[SCRIPT] $1:"
check_cards
;;
respond*)
echo "[SCRIPT] $1:"
check_respond
;;
[lL][oO][gG])
echo "[SCRIPT] $1:"
monitor_log
;;
conf*)
echo "[SCRIPT] $1:"
proc_Get_Editor
edit_file $1
;;
*)
echo "Usage: $0 [start|stop|restart|check|cards|respond|log|conf]"
;;
esac
proc_exit
