HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

tausend · 8. Dezember 2014

Ich habe eine etwas abenteuerliche Konfiguration meiner Karten, die für ein paar Monate so laufen soll.

Die V14 Karte steckt in meiner Fritzbox und läuft.
Neu dazu kommt jetzt eine HD02 Karte, die im internen Reader des Gigablue HD QUAD Receivers laufen soll.
Da ich die HD02 Karte aber noch nicht aufgeladen habe, kann ich nicht checken, ob alles korrekt läuft.
Kann man das anhand des OSCAM LOGS vom GIGABLUE sehen?
Ich möchte nicht die 60 Euro zahlen, und dann lüppt das so nicht...

LOG

2014/12/08 19:38:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9815 (mipsel-openpli40-linux-gnu-libusb)
2014/12/08 19:38:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 20190
2014/12/08 19:38:50 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/08 19:38:50 0 s signal handling initialized
2014/12/08 19:38:50 0 s V14 [cs357x] creating thread for device 192.168.0.1
2014/12/08 19:38:50 0 s HD02 [internal] creating thread for device /dev/sci0
2014/12/08 19:38:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/08 19:38:50 0 s waiting for local card init
2014/12/08 19:38:50 55FC60 r HD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=369, cardmhz=368)
2014/12/08 19:38:50 55DE30 p cs357x proxy 192.168.0.1:20197
2014/12/08 19:38:50 55DE30 p V14 [cs357x] proxy initialized, server 192.168.0.1:20197
2014/12/08 19:38:50 77700468 h webif: decompressed 150696 bytes back into 357872 bytes
2014/12/08 19:38:50 77700468 h HTTP Server running. ip=0.0.0.0 port=83
2014/12/08 19:38:51 55FC60 r HD02 [internal] card detected
2014/12/08 19:38:51 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX XX XX XX XX XX XX XX
2014/12/08 19:38:51 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 19:38:51 55FC60 r HD02 [internal] Calculated work ETU is 8.67 us reader mhz = 369
2014/12/08 19:38:56 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 19:38:56 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 19:38:57 55FC60 r HD02 [internal] detect native nagra card
2014/12/08 19:39:02 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 19:39:05 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 19:39:05 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 19:39:05 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 19:39:05 55FC60 r HD02 [internal] Calculated work ETU is 8.67 us reader mhz = 369
2014/12/08 19:39:10 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 19:39:10 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 19:39:10 55FC60 r HD02 [internal] card system not supported
2014/12/08 19:39:10 55FC60 r HD02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/08 19:39:11 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 19:39:11 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 19:39:11 55FC60 r HD02 [internal] Calculated work ETU is 100.81 us reader mhz = 369
2014/12/08 19:39:16 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 19:39:21 55FC60 r HD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/12/08 19:39:22 55FC60 r HD02 [internal] detect native nagra card
2014/12/08 19:39:25 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 19:39:28 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 19:39:28 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 19:39:28 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 19:39:28 55FC60 r HD02 [internal] Calculated work ETU is 8.67 us reader mhz = 369
2014/12/08 19:39:33 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 19:39:33 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 19:39:37 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 19:39:41 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 19:39:41 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 19:39:41 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 19:39:41 55FC60 r HD02 [internal] Calculated work ETU is 8.67 us reader mhz = 369
2014/12/08 19:39:46 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 19:39:46 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 19:39:46 55FC60 r HD02 [internal] card system not supported
2014/12/08 19:39:46 55FC60 r HD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/08 19:39:46 55FC60 r HD02 [internal] card initializing error
2014/12/08 19:39:47 0 s init for all local cards done
2014/12/08 19:39:47 0 s anti cascading disabled
2014/12/08 19:39:47 56D850 c plain dvbapi-client granted (gblue, au=auto (2 reader))
2014/12/08 19:39:47 56D850 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2014/12/08 19:39:51 56D850 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/12/08 19:39:51 56D850 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/12/08 19:39:51 56D850 c [ADD PID 2] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/12/08 19:39:51 56D850 c [ADD PID 3] CAID: 186A ECM_PID: 1ECC PROVID: 000000
2014/12/08 19:39:51 56D850 c [ADD PID 4] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/12/08 19:39:51 56D850 c [ADD PID 5] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/12/08 19:39:51 56D850 c Found 6 ECMpids and 7 STREAMpids in PMT
2014/12/08 19:39:51 56D850 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2014/12/08 19:39:51 56D850 c New program number: EF10 (1830:EF10 unknown) [pmt_list_management 3]
2014/12/08 19:39:51 56D850 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1ACC ANY CHID PMTPID 0060 VPID 00FF
2014/12/08 19:39:51 55DE30 p 192.168.0.1: resolved ip=192.168.0.1
2014/12/08 19:39:51 55DE30 p V14 [cs357x] connecting to 192.168.0.1:20197
2014/12/08 19:39:56 56D850 c gblue (098C&000000/0641/EF10/98:187964963F852E13BA47A081323D86AD): timeout (5001 ms) by V14
2014/12/08 19:39:56 56D850 c gblue (098C&000000/0641/EF10/98:187964963F852E13BA47A081323D86AD): not found (1 ms) by V14
2014/12/08 19:39:57 56D850 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2014/12/08 19:39:57 56D850 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1ACC ANY CHID PMTPID 0060 VPID 00FF
2014/12/08 19:40:02 56D850 c gblue (098C&000000/0641/EF10/98:187964963F852E13BA47A081323D86AD): timeout (5001 ms) by V14
2014/12/08 19:40:06 56D850 c gblue (098C&000000/0641/EF10/98:E975A3B4E4D20B6E4541C15DC3D23FEE): timeout (5000 ms) by V14
2014/12/08 19:40:06 56D850 c gblue (098C&000000/0641/EF10/98:E975A3B4E4D20B6E4541C15DC3D23FEE): not found (3753 ms) by V14
2014/12/08 19:40:06 56D850 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2014/12/08 19:40:07 56D850 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1ACC ANY CHID PMTPID 0060 VPID 00FF

oscam.server auf GIGABLUE

[reader]label = V14
protocol = camd35
device = 192.168.0.1,20197
caid = 098C
user = gblue
password = gblue
#ident = 0500:023800;0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000
group = 1
#audisabled = 1

[reader]
label = HD02
protocol = internal
detect = CD
device = /dev/sci0
services = hdplus
caid = 1843
group = 1
emmcache = 1,3,2
rsakey = BF358BXXXX
boxkey = A764XXX
ecmwhitelist = 1843:89
mhz = 369
cardmhz = 368

dodo83 · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

die Karte wird nicht eingelesen
probiere mal mit CARDMHZ auf 2700
eventuell mal AUTOSPEED deaktivieren und mit den MHZ werten rumprobieren

tausend · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

Vielen Dank für die schnelle Antwort...!

Log mit CARDMHZ = 2700

2014/12/08 20:03:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9815 (mipsel-openpli40-linux-gnu-libusb)
2014/12/08 20:03:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 22564
2014/12/08 20:03:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/08 20:03:13 0 s signal handling initialized
2014/12/08 20:03:13 0 s V14 [cs357x] creating thread for device 192.168.0.1
2014/12/08 20:03:13 0 s HD02 [internal] creating thread for device /dev/sci0
2014/12/08 20:03:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/08 20:03:13 0 s waiting for local card init
2014/12/08 20:03:13 55FC60 r HD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.69 MHz
2014/12/08 20:03:13 55DE30 p cs357x proxy 192.168.0.1:20197
2014/12/08 20:03:13 55DE30 p V14 [cs357x] proxy initialized, server 192.168.0.1:20197
2014/12/08 20:03:13 77700468 h webif: decompressed 150696 bytes back into 357872 bytes
2014/12/08 20:03:13 77700468 h HTTP Server running. ip=0.0.0.0 port=83
2014/12/08 20:03:14 55FC60 r HD02 [internal] card detected
2014/12/08 20:03:15 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 20:03:15 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:03:15 55FC60 r HD02 [internal] TEST tempo mhz check = 500 mhz
2014/12/08 20:03:15 55FC60 r HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/12/08 20:03:20 55FC60 r HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/08 20:03:20 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 20:03:21 55FC60 r HD02 [internal] detect native nagra card
2014/12/08 20:03:23 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 20:03:24 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 20:03:24 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 XX
2014/12/08 20:03:24 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:03:24 55FC60 r HD02 [internal] TEST tempo mhz check = 500 mhz
2014/12/08 20:03:24 55FC60 r HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/12/08 20:03:29 55FC60 r HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/08 20:03:29 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 20:03:29 55FC60 r HD02 [internal] card system not supported
2014/12/08 20:03:29 55FC60 r HD02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/08 20:03:30 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 71 XX
2014/12/08 20:03:30 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:03:30 55FC60 r HD02 [internal] TEST tempo mhz check = 500 mhz
2014/12/08 20:03:30 55FC60 r HD02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/12/08 20:03:35 55FC60 r HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/08 20:03:42 55FC60 r HD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/12/08 20:03:43 55FC60 r HD02 [internal] detect native nagra card
2014/12/08 20:03:50 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 20:03:57 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 20:03:57 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 71 XX
2014/12/08 20:03:57 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:03:57 55FC60 r HD02 [internal] TEST tempo mhz check = 500 mhz
2014/12/08 20:03:57 55FC60 r HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/12/08 20:04:02 55FC60 r HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/08 20:04:02 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 20:04:04 55FC60 r HD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/08 20:04:05 55FC60 r HD02 [internal] T1 Resync command error, trying to reactivate!
2014/12/08 20:04:06 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 71 XX
2014/12/08 20:04:06 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:04:06 55FC60 r HD02 [internal] TEST tempo mhz check = 500 mhz
2014/12/08 20:04:06 55FC60 r HD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/12/08 20:04:11 55FC60 r HD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/12/08 20:04:11 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 20:04:11 55FC60 r HD02 [internal] card system not supported
2014/12/08 20:04:11 55FC60 r HD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/08 20:04:11 55FC60 r HD02 [internal] card initializing error
2014/12/08 20:04:11 0 s init for all local cards done
2014/12/08 20:04:11 0 s anti cascading disabled
2014/12/08 20:04:11 56D850 c plain dvbapi-client granted (gblue, au=auto (2 reader))
2014/12/08 20:04:11 56D850 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2014/12/08 20:04:14 56D850 c Found 0 ECMpids and 8 STREAMpids in PMT
2014/12/08 20:04:14 56D850 c [DVBAPI] Receiver wants to demux srvid 6F83 on adapter 0000 camask 0001 index 0000 pmtpid 15FE
2014/12/08 20:04:14 56D850 c New program number: 6F83 (FFFE:6F83 unknown) [pmt_list_management 3]

sieht das besser aus?

wie deaktiviere ich autospeed?

und wieso zerschiests mir meine SPOILER???

dodo83 · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

nöö
das gleiche, RESYNC ERROR

der RSA und BOXKEY ist aber komplett in der Config

kannst du eventuell einen externen Reader testen?
oder probiere mal auch andere OScam versionen oder auch mal ein anderes Image...

tausend · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

danke, da war ein Leerzeichen im RSA... :emoticon-0145-shake

neuer log mit 2700

2014/12/08 20:30:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9815 (mipsel-openpli40-linux-gnu-libusb)
2014/12/08 20:30:43 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 25016
2014/12/08 20:30:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/12/08 20:30:43 0 s signal handling initialized
2014/12/08 20:30:43 0 s V14 [cs357x] creating thread for device 192.168.0.1
2014/12/08 20:30:43 0 s HD02 [internal] creating thread for device /dev/sci0
2014/12/08 20:30:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/08 20:30:43 0 s waiting for local card init
2014/12/08 20:30:43 55DE30 p cs357x proxy 192.168.0.1:20197
2014/12/08 20:30:43 55DE30 p V14 [cs357x] proxy initialized, server 192.168.0.1:20197
2014/12/08 20:30:43 55FC60 r HD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=369, cardmhz=0)
2014/12/08 20:30:43 77700468 h webif: decompressed 150696 bytes back into 357872 bytes
2014/12/08 20:30:43 77700468 h HTTP Server running. ip=0.0.0.0 port=83
2014/12/08 20:30:44 55FC60 r HD02 [internal] card detected
2014/12/08 20:30:44 55FC60 r HD02 [internal] ATR: 3F FF 95 00 FF 91 81 71 XX
2014/12/08 20:30:44 55FC60 r HD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/08 20:30:44 55FC60 r HD02 [internal] Calculated work ETU is 8.67 us reader mhz = 369
2014/12/08 20:30:49 55FC60 r HD02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
2014/12/08 20:30:49 55FC60 r HD02 [internal] Card responded ok for ifsd request of 160
2014/12/08 20:30:50 55FC60 r HD02 [internal] detect native nagra card
2014/12/08 20:30:51 55FC60 r HD02 [internal] found card system nagra
2014/12/08 20:30:51 55FC60 r HD02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/08 20:30:51 55FC60 r HD02 [nagra] ROM: D N A S P 1 8 0
2014/12/08 20:30:51 55FC60 r HD02 [nagra] REV: M e r 0 0 0
2014/12/08 20:30:51 55FC60 r HD02 [nagra] SER: ############
2014/12/08 20:30:51 55FC60 r HD02 [nagra] CAID: 1843
2014/12/08 20:30:51 55FC60 r HD02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/12/08 20:30:51 55FC60 r HD02 [nagra] Prv.ID: 00 00 00 00
2014/12/08 20:30:51 55FC60 r HD02 [nagra] IRD ID: ############
2014/12/08 20:30:51 55FC60 r HD02 [nagra] active to: 2014/04/10 12:59
2014/12/08 20:30:51 55FC60 r HD02 [nagra] -----------------------------------------
2014/12/08 20:30:51 55FC60 r HD02 [nagra] |id |tier |valid from |valid to |
2014/12/08 20:30:51 55FC60 r HD02 [nagra] +----+--------+------------+------------+
2014/12/08 20:30:51 55FC60 r HD02 [nagra] |8011|0066 |2013/02/16 |2014/02/17 |
2014/12/08 20:30:51 55FC60 r HD02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/12/08 20:30:51 55FC60 r HD02 [nagra] -----------------------------------------
2014/12/08 20:30:52 55FC60 r HD02 [nagra] ready for requests
2014/12/08 20:30:52 0 s init for all local cards done
2014/12/08 20:30:52 0 s anti cascading disabled
2014/12/08 20:30:52 566C48 c plain dvbapi-client granted (gblue, au=auto (2 reader))
2014/12/08 20:30:52 566C48 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2014/12/08 20:30:54 566C48 c Found 0 ECMpids and 8 STREAMpids in PMT
2014/12/08 20:30:54 566C48 c [DVBAPI] Receiver wants to demux srvid 6F83 on adapter 0000 camask 0001 index 0000 pmtpid 15FE
2014/12/08 20:30:54 566C48 c New program number: 6F83 (FFFE:6F83 unknown) [pmt_list_management 3]

wenn ich jetzt freischalte, müsste es laufen, oder?

dodo83 · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

passt jetzt vom log her

tausend · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

So, lüppt alles.
HD02 bei HDPlus online bezahlt.
Ab damit in den internen Reader und nach 45sec war alles hell.

Besten Dank für den Support!!!

Fall noch jemand eine solche Konfiguration bauen möchte hier nochmal die Rahmenbedingungen und configs:

V14 steckt im SMARGO Reader in der Fritzbox
HD02 steckt im internen Reader im GIGABLUE HD QUAD

oscam.conf GIGABLUE
-----------

[dvbapi]
enabled = 1
au = 1
user = gblue

[webif]
httpport = 83
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255
appendchaninfo = 1

--------------------

oscam.user GIGABLUE
------------------

[account]
user = gblue
au = 1
group = 1
----------------

oscam.server GIGABLUE
--------------------

[reader]
label = V14
protocol = camd35
device = 192.168.0.1,20197
caid = 098C
user = gblue
password = gblue
group = 1

[reader]
label = HD02
protocol = internal
detect = CD
device = /dev/sci0
services = hdplus
caid = 1843
group = 1
emmcache = 1,3,2
rsakey = BF358B5461863***
boxkey = A7642F***
ecmwhitelist = 1843:89
mhz = 369
cardmhz = AUTOSPEED
------------------------------

oscam.conf FREETZ
-----------------------------

[global]
disablelog = 1
logfile = /var/media/ftp/uStor01/logs/oscam.log
clienttimeout = 10000
fallbacktimeout = 2000
nice = -1
maxlogsize = 200
waitforcards_extra_delay = 800
preferlocalcards = 1

[cs357x]
port = 20197

[newcamd]
port = 10001@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12001
nodeid = 20C90***

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 1
hideclient_to = 30

[webif]
httpport = 83
httpcss = /var/media/ftp/uStor01/service/oscam/style.css
httphelplang = de
httprefresh = 10
httphideidleclients = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30

-----------------------------

oscam.user FREETZ
----------------------------

[account]
user = user
pwd = pass
caid = 098C
monlevel = 1
au = 0
group = 1
cccmaxhops = 1
cccreshare = 1

[account]
user = monitor
pwd = monitor

[account]
user = vdr-sc
pwd = vdr-sc
caid = 098C
au = 0
group = 1

[account]
user = whz
pwd = whz
caid = 098C
suppresscmd08 = 1
au = v14
group = 1

[account]
user = gblue
pwd = gblue
caid = 098C
suppresscmd08 = 1
au = v14
group = 1
------------------------------------

oscam.server FREETZ
-----------------------------------

[reader]
label = v14
enable = 1
#protocol = mouse
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
ins7e11 = 15
ndsversion = 2
boxid = 12345678
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126-127,131,141-255
---------------------------

4gx35 · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

normalerweise reicht der proxy reader, um die v14 auf der giga hell werden zu lassen,
device sci0 sagt dann wo die hd+ karte im receiver liegt, wo gibt es denn cardclient.conf ?
höre ich jetzt zum ersten mal
auf der fritte musst du einen proxy reader anlegen, der die hd+ karte shared,
also etwa wie v14 auf der giga, ich würde immer erst cccam verwenden, da das auch meist alle clients können,
camd35 gibt es mit dieser bezeichnung bei aktueller oscam auch nicht mehr

tausend · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

cardclient.conf war Unsinn und stammt aus meinen Reelboxzeiten.
Grundsätzlich läuft alles mit obigen Einstellungen.
Sind da gravierende Fehler drin, die meine Konfiguration bremsen oder so?

4gx35 · 8. Dezember 2014

AW: HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

das schlimmste übel ist blockemm-bylen, nicht mehr verwenden,
wenn du pairing sicher verhindern willst

Suche

Suche

HD02 Karte intern (Gigablue HD Quad) und V14 in Fritzbox, geht das?

tausend

Ist gelegentlich hier

dodo83

tausend

Ist gelegentlich hier

dodo83

tausend

Ist gelegentlich hier

dodo83

tausend

Ist gelegentlich hier

4gx35

tausend

Ist gelegentlich hier

4gx35

Ähnliche Themen

Spenden Unterstützung