Hardware für HD+ Server was wird benötigt?

[Bodo-1]

AW: Hardware für HD+ Server was wird benötigt?

Du musst einen Linux konformen Editor haben wie Zb Note++ ( kostenlos )

Du machst aber am besten jetzt alle Änderungen direkt über dein oscam Webinterface und rührst nicht mehr mit ftp in den Dateien herum !

Jede Änderung die über die FTP Verbindung machst bedarf einem Oscam Reboot.

Wenn du alles über das Webif von Oscam machst dann musst du so gut wie nie Rebooten
und trozdem sind alle Änderungen direkt wirksam .

 

[Butalo]

AW: Hardware für HD+ Server was wird benötigt?

Device Error bedeutet das der Pad den du da angeben hast nicht passt du deinem Reader .
Wenn die Karte korrekt eingelsen wird , steht Card OK im Webinterface .

Versuch es mal mit :

/dev/sci1 oder aber mit /dev/sci0

danach oscam neustarten

Hab es versucht bringt in dem Fall leider nichts gebracht.... Bei den Readern ist bei Status alles rot :-(

 

[supraracer]

AW: Hardware für HD+ Server was wird benötigt?

Starte OScam mal über das WebIF neu und poste das Log ab Start über das Einlesen der Karte.
Dazu noch deine aktuelle oscam.server posten. Alles schön übersichtlich im Spoiler versteht sich.

-supraracer

 

[f01]

AW: Hardware für HD+ Server was wird benötigt?

...nochmal langsam
Hast du die Änderungen im WebIf gemacht oder über ftp und Editor?
Dann allerdings wue Bodo sagte mit linuxkonformen Editor?

gesendet mit Tapa

 

[Bodo-1]

AW: Hardware für HD+ Server was wird benötigt?

Zeig uns doch bitte mal den gesamten Inhalt deiner Oscam.Server

Du hast da sicherlich einen kleinen Fehler drin

 

[Butalo]

AW: Hardware für HD+ Server was wird benötigt?

Ich mach nun alle Änderungen nur noch über des webif.... mein oscam.server sieht nun so aus:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11209
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = v14
protocol = internal
device = /dev/sci0
services = !hdplus
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2


[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
group = 2
emmcache = 1,1,2,0

- - - - - - - - - -

Wird es niergend wo angezeigt das die Karte funktionstüchtig ist aber nicht aufgeladen?

Ich hab die Karte ja gebraucht gekauft, nachher tut die nicht mehr....

 

[tulpenknicker]

AW: Hardware für HD+ Server was wird benötigt?

Du hast bei beiden readern den gleichen device. device = /dev/sci0. Einer sollte auf device = /dev/sci1 geändert werden...je nachsem welcher in welchem schacht steckt

 

[Bodo-1]

AW: Hardware für HD+ Server was wird benötigt?

Du kannst nicht bei beiden Karten den gleichen Pfad angeben device = /dev/sci0


Bei RSA und Boxkey kontrollier mal das keine Leerzeichen drin sind .
Bitte setzt deine Configs zukünftig in Spoiler

Edit: Tulpi mal wieder schneller :agree:

 

[Butalo]

AW: Hardware für HD+ Server was wird benötigt?

Ich hab einen CI Schacht (obere) und einen kleinen (eins drunter) ich weiß nicht welcher für 0 oder 1 steht... Hab nun beide Kombinationen getestet und zwischendrin ein Neustart gemacht... Und diesmal immer der V14 und der HD01 nen unterschiedlichen /sci gegeben...

Hier ist eine LiveLog:

Spoiler

2016/03/22 23:03:19 00000000 s (main) System name = Linux
2016/03/22 23:03:19 00000000 s (main) Host name = vusolose
2016/03/22 23:03:19 00000000 s (main) Release = 3.13.5
2016/03/22 23:03:19 00000000 s (main) Version = #1 SMP Tue Jan 19 02:18:36 CET 2016
2016/03/22 23:03:19 00000000 s (main) Machine = mips
2016/03/22 23:03:19 00000000 s (main) Stb model = dm8000
2016/03/22 23:03:19 00000000 s (main) Stb vumodel = vusolose
2016/03/22 23:03:19 00000000 s (main) Stb boxtype = vusolose
2016/03/22 23:03:19 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9562
2016/03/22 23:03:19 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2016/03/22 23:03:19 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/03/22 23:03:19 00000000 s (main) signal handling initialized
2016/03/22 23:03:19 00000000 s (reader) v14 [internal] creating thread for device /dev/sci0
2016/03/22 23:03:19 00000000 s (reader) hd01 [internal] creating thread for device /dev/sci1
2016/03/22 23:03:19 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/03/22 23:03:19 00000000 s (main) waiting for local card init
2016/03/22 23:03:19 6DDF66D1 r (reader) v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2016/03/22 23:03:19 6DDF66D1 r (reader) v14 [internal] Reader sci internal, detected box type: vusolose
2016/03/22 23:03:19 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:19 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:19 01032DD0 h (webif) webif: decompressed 166195 bytes back into 397152 bytes
2016/03/22 23:03:19 01032DD0 h (webif) HTTP Server running. ip=192.168.0.10 port=8080
2016/03/22 23:03:20 6DDF66D1 r (reader) v14 [internal] card detected
2016/03/22 23:03:21 6DDF66D1 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2016/03/22 23:03:21 6DDF66D1 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/03/22 23:03:21 6DDF66D1 r (reader) v14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2016/03/22 23:03:21 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:21 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:23 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:23 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:25 6DDF66D1 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 3099452
2016/03/22 23:03:25 6DDF66D1 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/03/22 23:03:25 6DDF66D1 r (reader) v14 [internal] Card responded ok for ifsd request of 251
2016/03/22 23:03:25 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:25 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:26 6DDF66D1 r (reader) v14 [internal] detect native nagra card
2016/03/22 23:03:27 6DDF66D1 r (reader) v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2016/03/22 23:03:27 6DDF66D1 r (reader) v14 [internal] card system not supported
2016/03/22 23:03:27 6DDF66D1 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2016/03/22 23:03:27 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:27 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:28 6DDF66D1 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2016/03/22 23:03:28 6DDF66D1 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/03/22 23:03:28 6DDF66D1 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2016/03/22 23:03:29 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:29 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:31 6DDF66D1 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 3099573
2016/03/22 23:03:31 6DDF66D1 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/03/22 23:03:31 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:31 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:33 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:33 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:35 6DDF66D1 r (reader) v14 [internal] Warning: Card returned error on setting ifsd value to 251
2016/03/22 23:03:35 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:35 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:36 6DDF66D1 r (reader) v14 [internal] detect native nagra card
2016/03/22 23:03:37 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:37 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:39 6DDF66D1 r (reader) v14 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/03/22 23:03:39 2D810D7E r (reader) hd01 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
2016/03/22 23:03:39 2D810D7E r (reader) hd01 [internal] Cannot open device: /dev/sci1
2016/03/22 23:03:39 2D810D7E r (reader) hd01 [internal] Deactivating card
2016/03/22 23:03:39 2D810D7E r (reader) hd01 [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
2016/03/22 23:03:42 6DDF66D1 r (reader) v14 [internal] T1 Resync command error, trying to reactivate!
2016/03/22 23:03:43 6DDF66D1 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2016/03/22 23:03:43 6DDF66D1 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/03/22 23:03:43 6DDF66D1 r (reader) v14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2016/03/22 23:03:46 6DDF66D1 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 3099532
2016/03/22 23:03:47 6DDF66D1 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/03/22 23:03:47 6DDF66D1 r (reader) v14 [internal] Card responded ok for ifsd request of 251
2016/03/22 23:03:48 6DDF66D1 r (reader) v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2016/03/22 23:03:48 6DDF66D1 r (reader) v14 [internal] card system not supported
2016/03/22 23:03:48 6DDF66D1 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/03/22 23:03:48 6DDF66D1 r (reader) v14 [internal] card initializing error
2016/03/22 23:03:48 00000000 s (main) init for all local cards done
2016/03/22 23:03:48 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/03/22 23:03:48 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/03/22 23:03:48 00000000 s (anticasc) anti cascading disabled
2016/03/22 23:03:48 548F76B9 c (client) plain dvbapi-client granted (anonymous, au=off)
2016/03/22 23:03:48 548F76B9 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2016/03/22 23:03:48 548F76B9 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32

- - - - - - - - - -

Spoiler

test test test

 

[dodo83]

AW: Hardware für HD+ Server was wird benötigt?

hi,
CI zählt nicht im Bezug auf die Softcam,
wenn du nur einen Kartenslot hast ist dieser über /dev/sci0 erreichbar

deaktiviere den v14 Reader am besten oder lösche erstmal und starte neu

EDIT
laut log wird die Karte auf dem v14 Reader erkannt ... /dev/sci0 ist richtig, nur eben für den Hdplus Reader

 

[Butalo]

AW: Hardware für HD+ Server was wird benötigt?

OK dodo83 hab ich gemacht, nun sieht es wie folgt aus:

oscam.server

Spoiler

[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
group = 2
emmcache = 1,1,2,0






#[reader]
#label = v14
#protocol = internal
#device = /dev/sci0
#services = !hdplus
#caid = 098C
#boxid = 12345678
#ins7e11 = 15
#detect = cd
#mhz = 450
#cardmhz = 2700
#group = 1
#emmcache = 1,1,2,0
#blockemm-unknown = 1
#blockemm-u = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1
#ndsversion = 2

und die Live Log:

Spoiler

• 2016/03/22 23:15:45 00000000 s (main) System name = Linux
• 2016/03/22 23:15:45 00000000 s (main) Host name = vusolose
• 2016/03/22 23:15:45 00000000 s (main) Release = 3.13.5
• 2016/03/22 23:15:45 00000000 s (main) Version = #1 SMP Tue Jan 19 02:18:36 CET 2016
• 2016/03/22 23:15:45 00000000 s (main) Machine = mips
• 2016/03/22 23:15:45 00000000 s (main) Stb model = dm8000
• 2016/03/22 23:15:45 00000000 s (main) Stb vumodel = vusolose
• 2016/03/22 23:15:45 00000000 s (main) Stb boxtype = vusolose
• 2016/03/22 23:15:45 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 10671
• 2016/03/22 23:15:45 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2016/03/22 23:15:45 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2016/03/22 23:15:45 00000000 s (main) signal handling initialized
• 2016/03/22 23:15:45 00000000 s (reader) hd01 [internal] creating thread for device /dev/sci0
• 2016/03/22 23:15:45 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2016/03/22 23:15:45 00000000 s (main) waiting for local card init
• 2016/03/22 23:15:45 6DDF66D1 r (reader) hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2016/03/22 23:15:45 6DDF66D1 r (reader) hd01 [internal] Reader sci internal, detected box type: vusolose
• 2016/03/22 23:15:45 2D810D7E h (webif) webif: decompressed 166195 bytes back into 397152 bytes
• 2016/03/22 23:15:45 2D810D7E h (webif) HTTP Server running. ip=192.168.0.10 port=8080
• 2016/03/22 23:15:46 6DDF66D1 r (reader) hd01 [internal] card detected
• 2016/03/22 23:15:47 6DDF66D1 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2016/03/22 23:15:47 6DDF66D1 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/03/22 23:15:47 6DDF66D1 r (reader) hd01 [internal] Calculated work ETU is 7.11 us reader mhz = 450
• 2016/03/22 23:15:50 6DDF66D1 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 3099614
• 2016/03/22 23:15:50 6DDF66D1 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
• 2016/03/22 23:15:50 6DDF66D1 r (reader) hd01 [internal] Card responded ok for ifsd request of 251
• 2016/03/22 23:15:51 6DDF66D1 r (reader) hd01 [internal] detect native nagra card
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [internal] ready for requests
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [internal] found card system nagra
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] ROM: D N A S P 1 4 2
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] REV: R e v G C 6
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] SER: ############
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] CAID: 1830
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] Prv.ID: 00 00 00 00
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] IRD ID: ############
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] active to: 2016/04/18 12:59
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] -----------------------------------------
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] |id |tier |valid from |valid to |
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] +----+--------+------------+------------+
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] |8011|0064 |2010/02/10 |2011/02/11 |
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] |8011|0BEA |2011/02/23 |2013/05/17 |
• 2016/03/22 23:15:52 6DDF66D1 r (reader) hd01 [nagra] -----------------------------------------
• 2016/03/22 23:15:53 00000000 s (main) init for all local cards done
• 2016/03/22 23:15:53 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2016/03/22 23:15:53 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2016/03/22 23:15:53 00000000 s (anticasc) anti cascading disabled
• 2016/03/22 23:15:53 4E11BA68 c (client) plain dvbapi-client granted (anonymous, au=off)
• 2016/03/22 23:15:53 4E11BA68 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2016/03/22 23:15:53 4E11BA68 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)

 

[Bodo-1]

AW: Hardware für HD+ Server was wird benötigt?

na ist doch Prima , passt Karte wird eingelesen .

Nur hast du scheinbar kein gültiges Entilemt auf der Karte , abgelaufen oder wie war das noch schnell mit der Karte ?

 

[dodo83]

AW: Hardware für HD+ Server was wird benötigt?

das AU wird aber nicht gehen da der DVBapi nicht zugeordnet wird

• 2016/03/22 23:15:53 4E11BA68 c (client) plain dvbapi-client granted (anonymous, au=off)

Configs bitte posten

 

[tulpenknicker]

AW: Hardware für HD+ Server was wird benötigt?

Jetzt müsste nur noch ein gültiges enti auf die karte und du hast hd+

 

[Bodo-1]

AW: Hardware für HD+ Server was wird benötigt?

@Butalo

Am besten Postest du nochmal alle deine jetzigen Configs in Spoilern , dann haben wir mal einen kompletten Überblick :emoticon-0144-nod:

Du bist mittlerweile auf dem richtigen Weg um endlich Hd+ zu schauen, das wird schon .