Freetz Image für FB 7330SL

[kaese1032]

AW: Freetz Image für FB 7330SL

oscam hab ich installiert
wo kann ich sehen das easymouse erkannt wird
was brauche ich für das image noch wenn keine external dabei ist
kann ich den spoiler so übernehmen

nun wie folgt

Spoiler

• 2014/11/08 23:10:31 568D50 r skyv14 [mouse] card detected
• 2014/11/08 23:10:31 566F20 r hdplus [mouse] card detected
• 2014/11/08 23:10:32 566F20 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 00 50 31
• 2014/11/08 23:10:32 566F20 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/08 23:10:32 566F20 r hdplus [mouse] Setting baudrate to 39638 bps
• 2014/11/08 23:10:32 566F20 r hdplus [mouse] Calculated work ETU is 25.27 us reader mhz = 368
• 2014/11/08 23:10:32 566F20 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/08 23:10:32 568D50 r skyv14 [mouse] ATR: F8 00
• 2014/11/08 23:10:32 568D50 r skyv14 [mouse] ERROR: Could not read reader->convention
• 2014/11/08 23:10:32 568D50 r skyv14 [mouse] Error activating card.
• 2014/11/08 23:10:33 566F20 r hdplus [mouse] card system not supported
• 2014/11/08 23:10:33 566F20 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/08 23:10:34 568D50 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2014/11/08 23:10:34 568D50 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/08 23:10:34 568D50 r skyv14 [mouse] Setting baudrate to 39638 bps
• 2014/11/08 23:10:34 568D50 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
• 2014/11/08 23:10:34 566F20 r hdplus [mouse] ATR: F5 FE 0F 7D F2 AF 69 00 AD F5 F0 FF FF F5 73
• 2014/11/08 23:10:34 566F20 r hdplus [mouse] ERROR: Could not read reader->convention
• 2014/11/08 23:10:34 566F20 r hdplus [mouse] Error activating card.
• 2014/11/08 23:10:34 568D50 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/08 23:10:36 566F20 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2014/11/08 23:10:36 566F20 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/08 23:10:36 566F20 r hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/11/08 23:10:36 566F20 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/08 23:10:38 568D50 r skyv14 [mouse] card system not supported
• 2014/11/08 23:10:38 568D50 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/08 23:10:39 566F20 r hdplus [mouse] card system not supported
• 2014/11/08 23:10:39 566F20 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/08 23:10:39 566F20 r hdplus [mouse] card initializing error
• 2014/11/08 23:10:40 568D50 r skyv14 [mouse] ATR: FF B4 E7 37 5B BF F5 FE 0F 7D F2 AF
• 2014/11/08 23:10:40 568D50 r skyv14 [mouse] ERROR: Could not read reader->convention
• 2014/11/08 23:10:40 568D50 r skyv14 [mouse] Error activating card.
• 2014/11/08 23:10:41 568D50 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2014/11/08 23:10:41 568D50 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/08 23:10:41 568D50 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/11/08 23:10:41 568D50 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/08 23:10:45 568D50 r skyv14 [mouse] card system not supported
• 2014/11/08 23:10:45 568D50 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/08 23:10:45 568D50 r skyv14 [mouse] card initializing error

 

[rolu2]

AW: Freetz Image für FB 7330SL

In dem Image ist alles drin. Eine external ist nur dabei,wenn wir Sachen ausgelagert haben beim Imagebau

Wie sind die Easymouse eingestellt? Siehe dazu hier die

Sie müssen registriert sein, um Links zu sehen.

Den Inhalt im Spoiler kannst du erstmal übernehmen.

Der rsakey und boxkey ist nicht vollständigt. Google hilft dir weiter den vollständigen einzutragen

 

[kaese1032]

AW: Freetz Image für FB 7330SL

OK

easymouse ist so eingestellt rot und grün LED haben auch schon abwechselnd geblinkt

Problem mit dem rsakey finde nichts

Ist der spoiler so ok (siehe oben)

 

[rolu2]

AW: Freetz Image für FB 7330SL

Die Karten werden nicht erkannt. Fang doch bitte mal erst mit der v14 an.

Treiber so einstellen

Du musst angemeldet sein, um Bilder zu sehen.

 

[kaese1032]

AW: Freetz Image für FB 7330SL

Hallo hab ich geändert

Live.log

Spoiler

• 2014/11/09 12:19:03 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
• 2014/11/09 12:19:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3071
• 2014/11/09 12:19:03 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2014/11/09 12:19:03 0 s [Emu] OSEmu (built-in) version 706
• 2014/11/09 12:19:03 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/11/09 12:19:03 0 s signal handling initialized
• 2014/11/09 12:19:03 0 s 159 service-id's loaded in 9 ms
• 2014/11/09 12:19:03 0 s 161 tier-id's loaded
• 2014/11/09 12:19:03 0 s 4 provid's loaded
• 2014/11/09 12:19:03 0 s cccam: initialized (fd=6, port=12000)
• 2014/11/09 12:19:03 0 s emulator [emu] creating thread for device emulator
• 2014/11/09 12:19:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/11/09 12:19:03 0 s waiting for local card init
• 2014/11/09 12:19:03 57FC00 h webif: decompressed 155240 bytes back into 367148 bytes
• 2014/11/09 12:19:03 57FC00 h HTTP Server running. ip=0.0.0.0 port=83
• 2014/11/09 12:19:03 55BB00 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2014/11/09 12:19:04 55BB00 r emulator [emu] card detected
• 2014/11/09 12:19:05 55BB00 r emulator [emu] found card system emu
• 2014/11/09 12:19:05 55BB00 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 12:19:06 0 s init for all local cards done
• 2014/11/09 12:19:06 0 s anti cascading disabled

 

[rolu2]

AW: Freetz Image für FB 7330SL

In dem Log wird kein reader abgefragt. Poste nochmal deine oscam.server

Gesendet von meinem JY-G3 mit Tapatalk

 

[kaese1032]

AW: Freetz Image für FB 7330SL

Ok hier

oscam.server

Spoiler

[reader]
label = hdplus
enable = 1
protocol = easymouse
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = hdplus
smargopatch = 1
caid = 1830
rsakey =
boxkey =
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

[reader]
label = skyv14
protocol = easymouse
device = /dev/ttyUSB0
autospeed = 0
fallback = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D,8070540000011D
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 300
ndsversion = 2

 

[rolu2]

AW: Freetz Image für FB 7330SL

Es gibt kein protocol = easymouse

Bitte mal so eintragen

Spoiler

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
#ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D,8070540000011D
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 300
ndsversion = 2

Edit. den HD+Reader komplett weg lassen erst mal

 

[kaese1032]

AW: Freetz Image für FB 7330SL

OK jetzt

Spoiler

• 2014/11/09 13:18:37 55BF00 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Card type: P1TV
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Rom version: 20AA
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Credit available on card: 0 euro
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Extended 4C detected
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] FuseByte: 25
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Region Code: 00BO0102
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Country Code: DEU
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Pincode read:
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] PCB settings: FF FF FF FF
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] ready for requests
• 2014/11/09 13:18:38 55BF00 r skyv14 [mouse] found card system videoguard2
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] card detected
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: af1a, expiry date: 2014/09/30-01:01:00
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 2710, expiry date: 2014/02/09-00:01:00
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0065, expiry date: 2014/12/06-00:00:00 SKY
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0066, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0067, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0068, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0069, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 006b, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 006f, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 007b, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 007d, expiry date: 2014/12/06-00:00:00 Sky
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 008e, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c0, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c7, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c8, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c9, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00ca, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00cb, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00d4, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00f3, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00fa, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00ff, expiry date: 2014/12/06-00:00:00
• 2014/11/09 13:18:44 0 s init for all local cards done
• 2014/11/09 13:18:44 0 s anti cascading disabled

 

[rolu2]

AW: Freetz Image für FB 7330SL

Das sieht doch schon mal top aus,deine V14 wird gelesen. Jetzt weiter mit der HD+
dazu das in die oscam.server rein

Spoiler

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
rsakey = BF3****D5
boxkey = A7**7C
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

rsakey und boykey ersetzen und easymouse mit karte ran und oscam neu starten

Schau mal do wo du die oscam runtergeladen hast vom Image aus. Habe da einen neuen Ordner angelegt.

Sollte dir helfen

Edit: Hast du eine weisse oder schwarze HD+?

Der Readereintrag ist für eine Weisse

 

[kaese1032]

AW: Freetz Image für FB 7330SL

Hallo

Spoiler

• 2014/11/09 15:27:13 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
• 2014/11/09 15:27:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8623
• 2014/11/09 15:27:13 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2014/11/09 15:27:13 0 s [Emu] OSEmu (built-in) version 706
• 2014/11/09 15:27:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/11/09 15:27:13 0 s signal handling initialized
• 2014/11/09 15:27:13 0 s 159 service-id's loaded in 9 ms
• 2014/11/09 15:27:13 0 s 161 tier-id's loaded
• 2014/11/09 15:27:13 0 s 4 provid's loaded
• 2014/11/09 15:27:13 0 s cccam: initialized (fd=5, port=12000)
• 2014/11/09 15:27:13 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
• 2014/11/09 15:27:13 0 s hdplus [mouse] creating thread for device /dev/ttyUSB1
• 2014/11/09 15:27:13 0 s emulator [emu] creating thread for device emulator
• 2014/11/09 15:27:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/11/09 15:27:13 0 s waiting for local card init
• 2014/11/09 15:27:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2014/11/09 15:27:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1
• 2014/11/09 15:27:13 55C928 h webif: decompressed 155240 bytes back into 367148 bytes
• 2014/11/09 15:27:13 55C928 h HTTP Server running. ip=0.0.0.0 port=83
• 2014/11/09 15:27:13 568AF8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2014/11/09 15:27:13 564E98 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
• 2014/11/09 15:27:14 568AF8 r emulator [emu] card detected
• 2014/11/09 15:27:14 564E98 r skyv14 [mouse] card detected
• 2014/11/09 15:27:15 568AF8 r emulator [emu] found card system emu
• 2014/11/09 15:27:15 568AF8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:27:15 564E98 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:27:15 564E98 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:27:15 564E98 r skyv14 [mouse] Setting baudrate to 39638 bps
• 2014/11/09 15:27:15 564E98 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
• 2014/11/09 15:27:15 564E98 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/09 15:27:16 564E98 r skyv14 [mouse] card system not supported
• 2014/11/09 15:27:16 564E98 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/09 15:27:18 564E98 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:27:18 564E98 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:27:18 564E98 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/11/09 15:27:18 564E98 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/09 15:27:19 564E98 r skyv14 [mouse] card system not supported
• 2014/11/09 15:27:19 564E98 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:27:19 564E98 r skyv14 [mouse] card initializing error
• 2014/11/09 15:28:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2014/11/09 15:28:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1
• 2014/11/09 15:29:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
• 2014/11/09 15:29:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1

Bei Status im Webif no data,error,unknown

wo meinst du neuen Ordner gefunden

unterseite ist weiß

 

[rolu2]

AW: Freetz Image für FB 7330SL

Teste mal erst die HD+ einzelen

Oscam.server

Spoiler

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF3****D5
boxkey = A7**7C
ecmwhitelist = 92
detect = cd
mhz = 358
cardmhz = 358
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

Den v14 reader deaktivieren.Dazu überall eine # vor den Eintragen

Unter Neuste OSCamversionen sollst du auf Download OSCam-Binary klicken. Wenn du auf unseren oscamserver bist, wirdt du schon sehen was ich meine


Edit: Was steht auf der HD+ drauf H01 oder H02

 

[kaese1032]

AW: Freetz Image für FB 7330SL

Spoiler

• 2014/11/09 15:46:18 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
• 2014/11/09 15:46:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12321
• 2014/11/09 15:46:18 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2014/11/09 15:46:18 0 s [Emu] OSEmu (built-in) version 706
• 2014/11/09 15:46:18 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/11/09 15:46:18 0 s signal handling initialized
• 2014/11/09 15:46:18 0 s 159 service-id's loaded in 9 ms
• 2014/11/09 15:46:18 0 s 161 tier-id's loaded
• 2014/11/09 15:46:18 0 s 4 provid's loaded
• 2014/11/09 15:46:18 0 s cccam: initialized (fd=5, port=12000)
• 2014/11/09 15:46:18 0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
• 2014/11/09 15:46:18 0 s emulator [emu] creating thread for device emulator
• 2014/11/09 15:46:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/11/09 15:46:18 0 s waiting for local card init
• 2014/11/09 15:46:18 559EF8 h webif: decompressed 155240 bytes back into 367148 bytes
• 2014/11/09 15:46:18 559EF8 h HTTP Server running. ip=0.0.0.0 port=83
• 2014/11/09 15:46:18 563FE8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2014/11/09 15:46:19 5621B8 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
• 2014/11/09 15:46:19 563FE8 r emulator [emu] card detected
• 2014/11/09 15:46:19 5621B8 r hdplus [mouse] card detected
• 2014/11/09 15:46:20 563FE8 r emulator [emu] found card system emu
• 2014/11/09 15:46:20 563FE8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:46:21 5621B8 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:46:21 5621B8 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:46:21 5621B8 r hdplus [mouse] Setting baudrate to 38400 bps
• 2014/11/09 15:46:21 5621B8 r hdplus [mouse] Calculated work ETU is 25.98 us reader mhz = 358
• 2014/11/09 15:46:21 5621B8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
• 2014/11/09 15:46:22 5621B8 r hdplus [mouse] card system not supported
• 2014/11/09 15:46:22 5621B8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/09 15:46:23 5621B8 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:46:23 5621B8 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:46:23 5621B8 r hdplus [mouse] Calculated work ETU is 103.91 us reader mhz = 358
• 2014/11/09 15:46:23 5621B8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
• 2014/11/09 15:46:24 5621B8 r hdplus [mouse] card system not supported
• 2014/11/09 15:46:24 5621B8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:46:24 5621B8 r hdplus [mouse] card initializing error
• 2014/11/09 15:46:25 0 s init for all local cards done
• 2014/11/09 15:46:25 0 s anti cascading disabled

ich habe nur eine karte hd+ ist dazugebucht

den ordner habe ich gefunden:emoticon-0111-blush

 

[rolu2]

AW: Freetz Image für FB 7330SL

Wenn du nur ein V14 hast und HD+ dazugebucht hast, brauchst du auch nur den Readereintrag für die v14.

Das hättest du ja schon mal viel früher sagen können

 

[kaese1032]

AW: Freetz Image für FB 7330SL

wusst ich nicht

Spoiler

• 2014/11/09 15:55:57 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
• 2014/11/09 15:55:57 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13969
• 2014/11/09 15:55:57 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2014/11/09 15:55:57 0 s [Emu] OSEmu (built-in) version 706
• 2014/11/09 15:55:57 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/11/09 15:55:57 0 s signal handling initialized
• 2014/11/09 15:55:57 0 s 159 service-id's loaded in 8 ms
• 2014/11/09 15:55:57 0 s 161 tier-id's loaded
• 2014/11/09 15:55:57 0 s 4 provid's loaded
• 2014/11/09 15:55:57 0 s cccam: initialized (fd=5, port=12000)
• 2014/11/09 15:55:57 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
• 2014/11/09 15:55:57 0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
• 2014/11/09 15:55:57 0 s emulator [emu] creating thread for device emulator
• 2014/11/09 15:55:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/11/09 15:55:57 0 s waiting for local card init
• 2014/11/09 15:55:57 568AF8 h webif: decompressed 155240 bytes back into 367148 bytes
• 2014/11/09 15:55:57 568AF8 h HTTP Server running. ip=0.0.0.0 port=83
• 2014/11/09 15:55:57 55C928 r skyv14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=22 Invalid argument)
• 2014/11/09 15:55:57 55C928 r skyv14 [mouse] Cannot open device: /dev/ttyUSB0
• 2014/11/09 15:55:57 566CC8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2014/11/09 15:55:57 564E98 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
• 2014/11/09 15:55:58 566CC8 r emulator [emu] card detected
• 2014/11/09 15:55:58 564E98 r hdplus [mouse] card detected
• 2014/11/09 15:55:59 566CC8 r emulator [emu] found card system emu
• 2014/11/09 15:55:59 566CC8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:55:59 564E98 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0
• 2014/11/09 15:55:59 564E98 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:55:59 564E98 r hdplus [mouse] Setting baudrate to 38400 bps
• 2014/11/09 15:55:59 564E98 r hdplus [mouse] Calculated work ETU is 25.98 us reader mhz = 358
• 2014/11/09 15:55:59 564E98 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
• 2014/11/09 15:56:00 564E98 r hdplus [mouse] card system not supported
• 2014/11/09 15:56:00 564E98 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/09 15:56:01 564E98 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:56:01 564E98 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:56:01 564E98 r hdplus [mouse] Calculated work ETU is 103.91 us reader mhz = 358
• 2014/11/09 15:56:01 564E98 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
• 2014/11/09 15:56:02 564E98 r hdplus [mouse] card system not supported
• 2014/11/09 15:56:02 564E98 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:56:02 564E98 r hdplus [mouse] card initializing error
• 2014/11/09 15:56:57 55C928 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
• 2014/11/09 15:56:58 55C928 r skyv14 [mouse] card detected
• 2014/11/09 15:57:00 55C928 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:57:00 55C928 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:57:00 55C928 r skyv14 [mouse] Setting baudrate to 39638 bps
• 2014/11/09 15:57:00 55C928 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
• 2014/11/09 15:57:00 55C928 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/09 15:57:01 55C928 r skyv14 [mouse] card system not supported
• 2014/11/09 15:57:01 55C928 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/11/09 15:57:02 55C928 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
• 2014/11/09 15:57:02 55C928 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2014/11/09 15:57:02 55C928 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/11/09 15:57:03 55C928 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2014/11/09 15:57:04 55C928 r skyv14 [mouse] card system not supported
• 2014/11/09 15:57:04 55C928 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/11/09 15:57:04 55C928 r skyv14 [mouse] card initializing error
• 2014/11/09 15:57:04 0 s init for all local cards done
• 2014/11/09 15:57:04 0 s anti cascading disabled