Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

Support Audi A3 - MIB-S – Supportthread (MIB1 MSTD) Panasonic

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!
Hey, thanks for the instruction :D

i had the same problem and i was able to restored my mmi to the original state. But unfortunately the version displayed on the MMI is the wrong one. Is there any way to change the version to the orginal one? The original version was Mstd_Eu_AU_P2440

thanks
 
eah i know but it bothers me, but anyways thanks :Dhow can i do the patch the right way when i have the version MSTD_EU_AU_P2440?
 
Zuletzt bearbeitet von einem Moderator:
In my opinion best way is to copy the original FEC_DB on SD Card, and edit it yourself with the correkt values.

But i dont know if this is possible also with the firmware MSTD_EU_AU_P2440
 
Hi @TheBlackSheep ,

I am trying to change FECs in my MSTD_EU_AU_P2440.
Dry run - when I try to modify Activators by Enthusiast FEC_DB file via SQLite browser I cannot find any related information about FECs.

Du musst dich Anmelden oder Registrieren um diesen Inhalt sichtbar zu machen!
@try5021 After restoring your original FEC_DB I understand that new maps are still not working for you? The only result is that you have MSTD_EU_AU_P3151 version visible now in MMI?
 
Zuletzt bearbeitet von einem Moderator:
Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Ich hab bereits MSTD_EU_AU_P5101 und habe mir dann das Kartenmaterial für 2023 auf einer SD-Karte gekauft. Ist aus Spanien gekommen. Mit Versand knapp 50,- EUR, statt für 199,- bei Audi.
Den Aktivator und das Patch kann man auch aus Spanien bekommen. Ist etwas teuerer.
Nach dem Kauf habe ich diverse Seiten gelesen. Vor einem Jahr gab es wenig bis garnichts für den MIB1.
Die Links sind in den oberen Post zu lesen.
Ich hab mit inzwischen weiterbelesen...
1. Patch für P5101 und Kartenfreischalten (SFC) in den Links
2. SD-Karte: Für den Patch und aktivator egal.
Für die Karten nicht egal. Da muss die CID stimmen, eine mögliche ist auch in den obigen Post zu finden.
Da ich etwas Lust zum Thema hatte, hab ich mit Ubuntu installiert und die CID von meiner ersten Karten und meiner neuen Karte ausgelesen. Dazu benötigst du Ubuntu, welche ich als USB-Stick habe. Wichtig ist dazu zu sagen, dass ich etwa 3-4 Laptops bzw. SD-Kartenlesegeräte ausprobieren musste. Ist auch zu bei den obigen Links alles gesammelt. Auch das Programm zum lesen und schreiben der CID. Zum schreiben brauchst du eine SD-Karte die das kann. Dafür gibt es in den obigen Links auch Empfehlungen. Hier kann man auch bei ebay oder aliexpress sich eine SD-Karte kaufen und die CID entsprechend mitteilen
Ich habe, weil ich Lust drauf habe, eine dieser Samsung Evo Plus 64D bestellt, kommt hoffentlich bald. Dann kann ich sehen ob es die richtige war und es so klappt in den ganzen Anleitungen. Theorectisch brauche ich das nicht mehr machen, ich will nur wissen, ob das alles so klappt. Zu den Karten aus Spanieren kommt jetzt nochmal 15,- bis 20,- EUR für ne Kartte, bei der ich die CID selbst ändern kann, wenn es denn die richtige ist. Gerne würde ich auch eine SD-Karte bestellen mit der CID drauf, dies benötige ich aber nicht, also spar ich dort die 15,- bis 20,- EUR. Wissen würde ich das trotzdem gerne.


Nachtrag 31.12.
Habe die Karte bekommen, mit der kurzen Aussage, dass die CID änderbar ist. Hab es mit Ubuntu und mmc64 bzw. mit Samsung_Cid probiert
Ändern konnte ich die bisher nicht. Sieht aber anders aus, als bei den anderen. Die Fehlermeldung bei mm64 hab ich noch entschlüsselen können, google gibt da nicht so richtiges her.
Werde noch etwas rumspielen, z.B. habe ich Ubuntu nie installiert, sondern immer nur "Try Ubuntu" benutzt, da wäre mehr drin. Und 1-2 andere Ideen habe ich auch noch.

Sollte ich eine SD-Karte mit bestimmter CID benötigen, dann bestelle ich mir diese dann direkt.
 
Zuletzt bearbeitet:
Hi,

Short summary on MSTD_EU_AU_P2440 software - until now it's no success.
My MMI is 8V0 035 864 A produced on 01.2013.
I was not trying tu upgrade the software to MSTD_EU_AU_K3151 because I like too much playing my Spotify playlist via bluetooth (BT lost after K3151 upgrade as some users reported here).

So I have run Activator, backed up FEC_DB in safe place.
Played a little with pase.bat
Bluetooth works independentely with original FEC_DB or the one provided by Enthusiast ( maybe it's a good sign to decide to update to 3151? :) )
Displayed version of Train now is MSTD_EU_AU_P5101 (but I am sure it's fake, the real one is still *2440 ).
Activation keys displayed correctly, 022000f0 allowed and with the most recent maps 02200030 supported.

After inserting SD Card with correct CID and P106 maps after some seconds of loading I only get the message "The navigation data are not enabled."

The only idea how I can proceed now is to update K3151 - if it's still possible.
Any feedback welcome.
 
After the patching of the unit now the unit have no navi enabled and bluetooth is not working. I dont have history of software version before the client do this patch by his own. Any fix for the unit that have no backup? This is the error shown after inserting the softwer or the patch...
 

Anhänge

  • 1.jpg
    1.jpg
    116,4 KB · Aufrufe: 65
  • 2.jpg
    2.jpg
    86,3 KB · Aufrufe: 65
There are several solutions to this problem. You can replace the nor chip and clone the otp area together with rpkpsh4 from another unit, you can also update the partitions manually, you can do a bypass for signature verification. I think that whoever shared this pseudo activator should feel obliged to explain everything.
 
Gibt`s so MIB1 Panasonic Radios ohne Bluetooth? Habe eins und als FEC Code drin, 5000 (Bluetooth) verfügbar, aber nicht installiert. Jetzt wäre mein Frage, wie kann ich den FEC Code aktivieren? Reines VCDS codieren geht logischerweise nicht.
 
Zurück
Oben