Moin Moin,
ich habe folgendes problem:
Ich habe mühselig mein HS bzw CS eingerichtet, es lief 5 Tage super;
doch jetzt funzt nur noch der Server! Alle Clients sind dunkel:/
Ich habe die Netzwerkeinstellungen gecheckt,die CCcam gecheckt, ich weiß keinen Rat!?
Ich betreibe HS und CS ,
Server eine dBox 2
Glj Image
EXT. Cardreader (Smartmouse/Easymouse)
CCcam 2.2.1
N: 127.0.0.1 15005 User1 Pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: USER1 PASS1
F: USER2 PASS2
F: USER3 PASS3
F: USER4 PASS4
SERVER LISTEN PORT : 12000
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 00 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
#N: { 02 }
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 02 } 172.16.1.1 28007
L: { 00 }
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
#H: { 07 }
H: { 00 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 01 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
Als Client habe ich im HS 1. eine coolstream hd1
mit der oscam 1.00.0.5068
und Mgcamd 1.35 austria
mg.cfg
#---Oscam Config Creator---
M: { 01 }
C: { 01 }
A: { 03 }
U: { 01 } 0x12c0
T: { 00 }
G: { 32 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 00 } username password
S: { 03 } 80
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 00 }
oscam.conf
#---Oscam Config Creator---
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log
maxlogsize = 256
Saveinithistory = 1
[webif]
HttpPort = 15005
HttpUser = dyndnsname
HttpPWD = dyndnspw
HttpRefresh = 10
HttpAllowed = 192.168.xxx.xxx-192.168.xxx.xxx
Httpdyndns = MYDYNDNS.dyndns.org
HttpReadOnly = 1
[cccam]
Port = 15005
Reshare = 1
Ignorereshare = 1
Version = 2.1.1
oscam.server
#---Oscam Config Creator---
[reader]
Label = CCcamRemote1
Protocol = cccam
Device = 192.168.xxx.xxx,15005
User = User1
Password = pass1
Group = 4
[reader]
Label = CCcamRemote2
Protocol = cccam
Device = 192.168.xxx.xxx,15005
User = User2
Password = pass2
Group = 5
oscam user
#---Oscam Config Creator---
[account]
User = user1
Pwd = pass1
Group = 4,5
AU = 1
cccmaxhops = 3
cccreshare = 1
[account]
User = user2
Pwd = pass2
Group = 4,5
AU = 1
cccmaxhops = 3
cccreshare = 1
und 2. eine dBox2
CCcam 2.2.1
C: 192.168.xxx.xxx 12000 user pass
IM CS Nutze ich 2 Clients
auch jeweils die dBox2
CCcam 2.1.1
C: MYDYNDNS.dyndns.org 12000 user pass no
Mein router ist als dyndns Server eingerichtet und funzt auch!
Die Ports sind auch Freigeschaltet!
Ich hoffer hier hat jemand Lust zu Helfen
Danke Dee
ich habe folgendes problem:
Ich habe mühselig mein HS bzw CS eingerichtet, es lief 5 Tage super;
doch jetzt funzt nur noch der Server! Alle Clients sind dunkel:/
Ich habe die Netzwerkeinstellungen gecheckt,die CCcam gecheckt, ich weiß keinen Rat!?
Ich betreibe HS und CS ,
Server eine dBox 2
Glj Image
EXT. Cardreader (Smartmouse/Easymouse)
CCcam 2.2.1
N: 127.0.0.1 15005 User1 Pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
F: USER1 PASS1
F: USER2 PASS2
F: USER3 PASS3
F: USER4 PASS4
SERVER LISTEN PORT : 12000
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 00 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
#N: { 02 }
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 02 } 172.16.1.1 28007
L: { 00 }
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
#H: { 07 }
H: { 00 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 01 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
Als Client habe ich im HS 1. eine coolstream hd1
mit der oscam 1.00.0.5068
und Mgcamd 1.35 austria
mg.cfg
#---Oscam Config Creator---
M: { 01 }
C: { 01 }
A: { 03 }
U: { 01 } 0x12c0
T: { 00 }
G: { 32 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 00 } username password
S: { 03 } 80
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 00 }
oscam.conf
#---Oscam Config Creator---
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log
maxlogsize = 256
Saveinithistory = 1
[webif]
HttpPort = 15005
HttpUser = dyndnsname
HttpPWD = dyndnspw
HttpRefresh = 10
HttpAllowed = 192.168.xxx.xxx-192.168.xxx.xxx
Httpdyndns = MYDYNDNS.dyndns.org
HttpReadOnly = 1
[cccam]
Port = 15005
Reshare = 1
Ignorereshare = 1
Version = 2.1.1
oscam.server
#---Oscam Config Creator---
[reader]
Label = CCcamRemote1
Protocol = cccam
Device = 192.168.xxx.xxx,15005
User = User1
Password = pass1
Group = 4
[reader]
Label = CCcamRemote2
Protocol = cccam
Device = 192.168.xxx.xxx,15005
User = User2
Password = pass2
Group = 5
oscam user
#---Oscam Config Creator---
[account]
User = user1
Pwd = pass1
Group = 4,5
AU = 1
cccmaxhops = 3
cccreshare = 1
[account]
User = user2
Pwd = pass2
Group = 4,5
AU = 1
cccmaxhops = 3
cccreshare = 1
und 2. eine dBox2
CCcam 2.2.1
C: 192.168.xxx.xxx 12000 user pass
IM CS Nutze ich 2 Clients
auch jeweils die dBox2
CCcam 2.1.1
C: MYDYNDNS.dyndns.org 12000 user pass no
Mein router ist als dyndns Server eingerichtet und funzt auch!
Die Ports sind auch Freigeschaltet!
Ich hoffer hier hat jemand Lust zu Helfen
Danke Dee