VU+ Solo2 Receiver und Sogno HD800 V3 mit Sky V13 wird hell; HD02 Karte nicht

[Micki Maus]

Hallo Gemeinde,
bei mir läuft die Solo2 als Server und die Sogno als Client mit der Sky V13 einwandfrei.
Nun habe ich eine alte HD02 Karte gefunden und über die HD+ Seite aktiviert.
Karte in den oberen Reader gesteckt aber nichts tut sich, Bild bleibt schwarz.
In der Client-Box hab ich die Karte ausprobiert und da wurde das Bild hell. Nur wenn sie da läuft bringt mir das ja nichts.
Weis vielleicht jemand einen Rat was falsch ist?
Im Oscam Webif bekomme ich immer diese Meldung angezeigt:

Spoiler

• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2015/11/20 15:19:11 4D520803 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/11/20 15:19:39 4D520803 c (-) -- Skipped 5 duplicated log lines --
• 2015/11/20 15:19:39 4D520803 c (reader) HD02 [nagra] Successfully added EMM to /etc/tuxbox/config/HD02_global_emm.log
• 2015/11/20 15:19:40 4D520803 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Anbei habe ich mal die Log vom Start an und meine Config kopiert.


Logfile

Spoiler

• 2015/11/20 15:19:01 1FBC6191 r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------from-ins70--
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [internal] ready for requests
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [internal] found card system nagra
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] ROM: D N A S P 1 8 0
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] REV: M e r 0 0 0
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] SER: ############
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] CAID: 1843
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] Prv.ID: 00 00 34 11 (sysid)
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] Prv.ID: 00 00 00 00
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] IRD ID: ############
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] active to: 2016/01/21 03:00
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] -----------------------------------------
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] |id |tier |valid from |valid to |
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] +----+--------+------------+------------+
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] |8011|0066 |2011/11/23 |2012/11/23 |
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] |8011|0BB8 |2015/11/16 |2016/01/09 |
• 2015/11/20 15:19:02 2590F345 r (reader) HD02 [nagra] -----------------------------------------
• 2015/11/20 15:19:03 00000000 s (main) init for all local cards done
• 2015/11/20 15:19:03 00000000 s (emmcache) loaded 30 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
• 2015/11/20 15:19:03 00000000 s (emmcache) loaded 30 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
• 2015/11/20 15:19:03 00000000 s (anticasc) anti cascading disabled
• 2015/11/20 15:19:03 4D520803 c (client) plain dvbapi-client granted (lokal, au=auto (4 reader))
• 2015/11/20 15:19:03 0F0308FD c (client) anonymous disconnected from 192.168.178.24
• 2015/11/20 15:19:03 4D520803 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2015/11/20 15:19:03 4D520803 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2015/11/20 15:19:04 2909076D c (client) encrypted cccam-client 192.168.178.24 granted (lokal, au=auto (4 reader))
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
• 2015/11/20 15:19:07 4D520803 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2015/11/20 15:19:11 4D520803 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/11/20 15:19:39 4D520803 c (-) -- Skipped 5 duplicated log lines --
• 2015/11/20 15:19:39 4D520803 c (reader) HD02 [nagra] Successfully added EMM to /etc/tuxbox/config/HD02_global_emm.log
• 2015/11/20 15:19:40 4D520803 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11086
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l/y

[cache]

[cccam]
port = 33333
serverip = 192.168.178.xxx
nodeid = 61EE0C25101C13E0
version = 2.3.0
reshare = 1

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = lokal
boxtype = dreambox

[webif]
httpport = xxx
httpuser = lokal
httppwd = xxxx
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.0.255,255.255.255.255
http_status_log = 1

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11086
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
protocol = internal
device = /dev/sci0
services = sky_v13
lb_whitelist_services = sky_v13
caid = 09C4,098C
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = HD02
description = hdplus02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = A7..........C
rsakey = BF35.....................A4DD5
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,3,2,0

[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = 192.168.178.xxx,xxxxxx
user = lokal
password = oscam
services = sky_v13,hd01
lb_whitelist_services = sky_v13,hd01
inactivitytimeout = 30
group = 3
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE

oscam.user

Spoiler

[account]
user = lokal
pwd = xxxxx
keepalive = 1
au = 1
group = 1,2,3
cccignorereshare = 0

[account]
user = client1
pwd = xxxx
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
user = client2
pwd = oscam
uniq = 3
keepalive = 1
group = 1,2
cccreshare = 0
cccignorereshare = 0

oscam.dvbapi

Spoiler

P: 1834
p: 09C4
I:0

besten Dank

 

[4gx35]

AW: VU+ Solo2 Receiver und Sogno HD800 V3 mit Sky V13 wird hell; HD02 Karte nicht

dvbapi muss 1843 heissen, aber für client ebenfalls oscam.dvbapi oder cccam.prio anlegen,
sonst hd+ services beim reader v13 blocken

 

[Micki Maus]

AW: VU+ Solo2 Receiver und Sogno HD800 V3 mit Sky V13 wird hell; HD02 Karte nicht

Ach, bin ich blöd.
dvbapi geändert, und es funzt.
Tausend Dank