Sky dunkel. no matching reader.... bitte um Hilfe

[lachsbrot]

Hallo zusammen,
ich habe leider ein Problem, was ich nicht lösen kann. Vielleicht könnt ihr mit hier weiter helfen.
Ich habe einen Igel als Server und eine VU als Client. Beides lief bis vor kurzem perfekt.
Seid zwei Tagen ist das Problem, das es finster ist.

Die V13 zeigt

CARDOK​

Sie müssen registriert sein, um Links zu sehen.

an, was ja heisst das die tiers abgelaufen sind. Dies zeigt auch das Lirelog an.
EMM werden im Reader nicht mit gepostet, jedoch über 3000 NOK.
Im Livelog ist:

Spoiler

• 2015/01/12 18:41:11 8E46F78 c encrypted cs378x-client 192.168.178.20 granted (stube, au=auto (2 reader))
• 2015/01/12 18:41:11 8E46F78 c stube (1702/0013/93): rejected group (0 ms) (no matching reader)
• 2015/01/12 18:41:12 8E46F78 c stube (1833/0013/89): rejected group (0 ms) (no matching reader)
• 2015/01/12 18:41:13 8E25160 r v13 [videoguard2] classD3 ins54: no cw --> Tier expired
• 2015/01/12 18:41:13 8E46F78 c stube emm-request sent (reader=v13, caid=09C4, auprovid=000000)
• 2015/01/12 18:41:13 8E46F78 c stube (09C4/0013/B3): not found (133 ms) by v13

Im oscam.server ist folgendes eingestellt

Spoiler

[reader]
label = v13
protocol = mouse
device = /dev/ttyUSB0
keepalive = 1
smargopatch = 1
autospeed = 0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
nagra_read = 2
mhz = 600
ident = 09C4:000000
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
ndsversion = 2

Nach restart folgende log:

Spoiler

• 2015/01/13 10:14:10 8E25160 r v13 [mouse] Card type: P1TV
• 2015/01/13 10:14:10 8E25160 r v13 [mouse] Rom version: 10A7
• 2015/01/13 10:14:10 8E25160 r v13 [mouse] Unable to get smartcard credit
• 2015/01/13 10:14:10 8E25160 r v13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
• 2015/01/13 10:14:10 8E25160 r v13 [mouse] found card system videoguard2
• 2015/01/13 10:14:10 8E25160 r v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/01/13 10:14:10 8E25160 r v13 [videoguard2] card detected
• 2015/01/13 10:14:10 8E25160 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
• 2015/01/13 10:14:10 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75130
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] Setting baudrate to 153600 bps
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75130
• 2015/01/13 10:14:12 8E25160 r v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Card type: P1TV
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Rom version: 10A7
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Unable to get smartcard credit
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] FuseByte: 25
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Region Code: 00BO0102
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Country Code: DEU
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] Pincode read: 9673
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] PCB settings: FF FF FF FF
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] ready for requests
• 2015/01/13 10:14:13 8E25160 r v13 [mouse] found card system videoguard2
• 2015/01/13 10:14:13 8E25160 r v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/01/13 10:14:13 8E25160 r v13 [videoguard2] card detected
• 2015/01/13 10:14:13 8E25160 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 007b, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 007d, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 0081, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 008e, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00c0, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00c7, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00c8, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00c9, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00ca, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00e4, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00e5, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00f3, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:14 8E25160 r v13 [videoguard2] tier: 00fa, expiry date: 2015/01/10-00:01:00
• 2015/01/13 10:14:17 0 s init for all local cards done
• 2015/01/13 10:14:17 0 s anti cascading disabled

 

[dia]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

dir fehlt das blockemm-u=1
löschen nagra_read = 2
welche oscam hast du drauf

 

[czutok]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

deine karte ist seit 3 tagen abgelaufen expiry date: 2015/01/10

also karte erstmal mit EMM's versorgen oder manuel schreiben , dann wird wider alles hell

 

[lachsbrot]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

deine karte ist seit 3 tagen abgelaufen expiry date: 2015/01/10

also karte erstmal mit EMM's versorgen oder manuel schreiben , dann wird wider alles hell

Danke für die schnelle Unterstützung.

EMMs selber erstellen geht wie? Was muss ich eintragen?

- - - - - - - - - -

dir fehlt das blockemm-u=1
löschen nagra_read = 2
welche oscam hast du drauf

Habe ich im Oscar.server nachgetragen und neu gestartet. Sollte hier somit warten, ob die EMM nun mit angeboten werden.

 

[czutok]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

nicht selbst erstelen sondern selbst schreiben

du must dir die emms schreiben lasen im log , dann kanst du die manuel auf die karte schreiben ( machen jetzt alle die ne v14 haben , ist gegen pairing )

 

[lachsbrot]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

Oscam habe ich gestern update gemacht.

• OSCAM: 1.20-unstable_svn Build: r10155 Compiler: i486-linux-gnu

 

[dia]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

er kann keine bekommen weil ihm das fehlt
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-unknown = 1

 

[czutok]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

und deswegen ist es auch dunkel geworden , weil er die emms blokiert hat

jetzt am besten das was dia geschriben hat eintragen , den einschalt impuls anforden und die emms logen , dann den pasendes auf die karte manuel schreiben

 

[lachsbrot]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

habe nun folgendes eingetragen. dia als Vorlage...

Spoiler

[reader]
label = v13
protocol = mouse
device = /dev/ttyUSB0
keepalive = 1
smargopatch = 1
autospeed = 0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
nagra_read = 2
mhz = 600
ident = 09C4:000000
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-unknown = 1

- - - - - - - - - -

hier nochmal zur Kontrolle die Oscar.conf auf dem Igel:

Spoiler

[global]serverip = xxxxxxxx
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 256
ecmfmt = c/s/l
emmlogdir = /var/log/ipc/
saveinithistory = 1

 

[lachsbrot]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

und deswegen ist es auch dunkel geworden , weil er die emms blokiert hat

jetzt am besten das was dia geschriben hat eintragen , den einschalt impuls anforden und die emms logen , dann den pasendes auf die karte manuel schreiben

Wo finde ich dann die EMMs? Wenn ich diese manuell nachtragen muss, sollte ich hier die Basis haben.

 

[dia]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

die findest du unter var-log-ipc
die datei heisst dann v13_uniquemm.log
das muss noch raus
löschen nagra_read = 2

 

[lachsbrot]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

aaahhh... OK... ist raus. Danke für das Feedback... Neustart und warten....

 

[czutok]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

emmlogdir = /var/log/ipc/ - da landen deine logs

und nicht nur warten sondern bei sky den freischalt impuls anfordern , wird schneller gehen als warten

 

[pehedima]

AW: Sky dunkel. no matching reader.... bitte um Hilfe

Im reader solltest aber folgendes wieder einfügen:

ndsversion = 2

Die Parameter serverip und saveinithistory aus der oscam.conf entfernen.

 

[lachsbrot]

emmlogdir = /var/log/ipc/ - da landen deine logs

und nicht nur warten sondern bei sky den freischalt impuls anfordern , wird schneller gehen als warten

Hast recht. Warten ist blöd Habe nun auf der Skyseite den Freischaltimpuls angeklickt.

habe nun die VU auf Sky krimi am laufen. Leider nach wie vor dunkel.
per FTP auf die Igel und mal nachgeschaut, v13_uniquemm.log ist nicht zu sehen. Dauert es länger?

es kommen im ipc Ordner keine EMMs an... Ist etwas falsch in den Einstellungen???

ich habe nun die Oscar neu gestartet und das Log hier angehängt. Vielleicht kommt hier ein Fehler raus. Ich kann keinen entdecken.

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Tue Jan 13 14:17:36 2015
-------------------------------------------------------------------------------
2015/01/13 14:17:36 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10155 (i486-linux-gnu)
2015/01/13 14:17:36 0 s System name = Linux
2015/01/13 14:17:36 0 s Host name = debian
2015/01/13 14:17:36 0 s Release = 3.2.0-4-686-pae
2015/01/13 14:17:36 0 s Version = #1 SMP Debian 3.2.63-2+deb7u2
2015/01/13 14:17:36 0 s Machine = i686
2015/01/13 14:17:36 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6218
2015/01/13 14:17:36 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/01/13 14:17:36 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/01/13 14:17:36 0 s signal handling initialized
2015/01/13 14:17:36 0 s cs378x: initialized (fd=5, port=xxxxx, ip=xxxx)
2015/01/13 14:17:36 0 s cccam: initialized (fd=6, port=xxxxxx, ip=xxxxx)
2015/01/13 14:17:36 0 s v13 [mouse] creating thread for device /dev/ttyUSB0
2015/01/13 14:17:36 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2015/01/13 14:17:36 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/13 14:17:36 0 s waiting for local card init
2015/01/13 14:17:36 8E2F408 p cs357x proxy 127.0.0.1:xxxx
2015/01/13 14:17:36 8E2F408 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:xxxx
2015/01/13 14:17:36 8E3AE40 h webif: decompressed 157758 bytes back into 374028 bytes
2015/01/13 14:17:36 8E3AE40 h HTTP Server running. ip=xxxx port=xxxxx
2015/01/13 14:17:36 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75159
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 1 value 03 time_us 2029
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 2 value 00 time_us 74937
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 3 value 57 time_us 976
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 4 value 5b time_us 975
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 5 value 3f time_us 972
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 6 value f7 time_us 975
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 7 value fe time_us 986
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 8 value 7d time_us 980
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 9 value f2 time_us 983
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 10 value 1f time_us 971
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 11 value 69 time_us 975
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 12 value 00 time_us 977
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 13 value ad time_us 981
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 14 value f5 time_us 12
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 15 value f1 time_us 948
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 16 value ff time_us 979
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 17 value ff time_us 976
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 18 value f5 time_us 977
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 19 value 73 time_us 981
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 20 value 7f time_us 976
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 21 value ff time_us 978
2015/01/13 14:17:36 8E25160 r v13 [mouse] Flush readed byte Nr 22 value 57 time_us 979
2015/01/13 14:17:36 8E25160 r v13 [mouse] Buffers readed 22 bytes total time_us 171145
2015/01/13 14:17:36 8E25160 r v13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2015/01/13 14:17:37 8E25160 r v13 [mouse] card detected
2015/01/13 14:17:37 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75133
2015/01/13 14:17:38 8E25160 r v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/01/13 14:17:38 8E25160 r v13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/01/13 14:17:38 8E25160 r v13 [mouse] Setting baudrate to 9600 bps
2015/01/13 14:17:38 8E25160 r v13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2015/01/13 14:17:38 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75139
2015/01/13 14:17:38 8E25160 r v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/01/13 14:17:39 8E25160 r v13 [mouse] Card type: P1TV
2015/01/13 14:17:39 8E25160 r v13 [mouse] Rom version: 10A7
2015/01/13 14:17:39 8E25160 r v13 [mouse] Unable to get smartcard credit
2015/01/13 14:17:39 8E25160 r v13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2015/01/13 14:17:39 8E25160 r v13 [mouse] found card system videoguard2
2015/01/13 14:17:39 8E25160 r v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/13 14:17:39 8E25160 r v13 [videoguard2] card detected
2015/01/13 14:17:39 8E25160 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/01/13 14:17:39 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75129
2015/01/13 14:17:41 8E25160 r v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/01/13 14:17:41 8E25160 r v13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/01/13 14:17:41 8E25160 r v13 [mouse] Setting baudrate to 153600 bps
2015/01/13 14:17:41 8E25160 r v13 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/01/13 14:17:41 8E25160 r v13 [mouse] Buffers readed 0 bytes total time_us 75130
2015/01/13 14:17:41 8E25160 r v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/01/13 14:17:42 8E25160 r v13 [mouse] Card type: P1TV
2015/01/13 14:17:42 8E25160 r v13 [mouse] Rom version: 10A7
2015/01/13 14:17:42 8E25160 r v13 [mouse] Unable to get smartcard credit
2015/01/13 14:17:42 8E25160 r v13 [mouse] FuseByte: 25
2015/01/13 14:17:42 8E25160 r v13 [mouse] Region Code: 00BO0102
2015/01/13 14:17:42 8E25160 r v13 [mouse] Country Code: DEU
2015/01/13 14:17:42 8E25160 r v13 [mouse] Pincode read: 9673
2015/01/13 14:17:42 8E25160 r v13 [mouse] PCB settings: FF FF FF FF
2015/01/13 14:17:42 8E25160 r v13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/01/13 14:17:42 8E25160 r v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/01/13 14:17:42 8E25160 r v13 [mouse] ready for requests
2015/01/13 14:17:42 8E25160 r v13 [mouse] found card system videoguard2
2015/01/13 14:17:42 8E25160 r v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/13 14:17:42 8E25160 r v13 [videoguard2] card detected
2015/01/13 14:17:42 8E25160 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 007b, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 007d, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 0081, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 008e, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00c0, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00c7, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00c8, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00c9, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00ca, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00e4, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00e5, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00f3, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:43 8E25160 r v13 [videoguard2] tier: 00fa, expiry date: 2015/01/10-00:01:00
2015/01/13 14:17:46 0 s init for all local cards done
2015/01/13 14:17:46 0 s anti cascading disabled
2015/01/13 14:17:46 8E4ADB8 c encrypted cs378x-client 192.168.178.xx granted (stube, au=auto (2 reader))
2015/01/13 14:17:46 8E4ADB8 c stube (1702/0017/93): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:46 8E4ADB8 c stube (1833/0017/89): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:47 0 --- Skipped 1 duplicated log lines ---
2015/01/13 14:17:47 8E25160 r v13 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/13 14:17:47 8E4ADB8 c stube emm-request sent (reader=v13, caid=09C4, auprovid=000000)
2015/01/13 14:17:47 8E4ADB8 c stube (09C4/0017/B3): not found (148 ms) by v13
2015/01/13 14:17:47 8E4ADB8 c stube (09AF/0017/92): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:48 8E4ADB8 c stube (098C/0017/98): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:49 8E4ADB8 c stube (1702/0017/93): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:50 8E4ADB8 c stube (09AF/0017/92): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:51 8E4ADB8 c stube (098C/0017/98): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:52 8E4ADB8 c stube (1702/0017/93): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:53 8E4ADB8 c stube (1833/0017/89): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:53 8E25160 r v13 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/13 14:17:53 8E4ADB8 c stube (09C4/0017/B3): not found (132 ms) by v13
2015/01/13 14:17:58 8E4ADB8 c stube (1702/0017/93): rejected group (0 ms) (no matching reader)
2015/01/13 14:17:59 8E4ADB8 c stube (1833/0017/89): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:00 8E25160 r v13 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/13 14:18:00 8E4ADB8 c stube (09C4/0017/B3): not found (132 ms) by v13
2015/01/13 14:18:00 8E4ADB8 c stube (09AF/0017/92): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:01 8E4ADB8 c stube (098C/0017/98): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:05 8E4ADB8 c stube (1702/0017/93): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:06 8E4ADB8 c stube (1833/0017/89): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:07 8E25160 r v13 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/13 14:18:07 8E4ADB8 c stube (09C4/0017/B3): not found (134 ms) by v13
2015/01/13 14:18:07 8E4ADB8 c stube (09AF/0017/92): rejected group (0 ms) (no matching reader)
2015/01/13 14:18:08 8E4ADB8 c stube (098C/0017/98): rejected group (0 ms) (no matching reader)