Balu-700
Hacker
Hey
Seid heute will die HD 02 im Smargo nicht mehr
Smargo hängt an einer Fritte 7270 mit S02
So2 wird gelesen und funzt.
ich hab nix geändert.
Hier mal die Fehlermeldung im Log:
Kan mir jemand den Fehler erklären??
Den Smargo kann ich mit Telnet an der Fritte ansprechen.
Die HD 02 Karte funzt im Schacht von ener Dream 800se mit CCcam und Scam
Danke Balu
Seid heute will die HD 02 im Smargo nicht mehr
Smargo hängt an einer Fritte 7270 mit S02
So2 wird gelesen und funzt.
ich hab nix geändert.
Hier mal die Fehlermeldung im Log:
- hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
- 2014/12/29 21:25:42 4FB498 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
- 2014/12/29 21:25:42 4FB498 r hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
- 2014/12/29 21:25:42 4FB498 r hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
- 2014/12/29 21:25:43 4FB498 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
- 2014/12/29 21:25:43 4FB498 r hdplus [smartreader] Card responded ok for ifsd request of 28
- 2014/12/29 21:25:44 4FB498 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
- 2014/12/29 21:25:44 4FB498 r hdplus [smartreader] T1 Resync command succesfull ifsc = 28
- 2014/12/29 21:25:46 4FB498 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
- 2014/12/29 21:25:46 4FB498 r hdplus [smartreader] T1 Resync command succesfull ifsc = 28
- 2014/12/29 21:25:46 4FB498 r hdplus [smartreader] card system not supported
- 2014/12/29 21:25:46 4FB498 r hdplus [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
- 2014/12/29 21:25:46 4FB498 r hdplus [smartreader] card initializing error
- #Readereinstellungen fuer ein schwarze HD+Karte
- Oscam Server
[reader]
label = hdplus
enable = 1
protocol = smartreader
device = 001:003
device_out_endpoint = 0x82
#services = hdplus
smargopatch = 1
caid = 1843
rsakey = natürlich eingetragen
boxkey = natürlich eingetragen
ecmwhitelist = 89
detect = cd
mhz = 368
cardmhz = 368
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001
Kan mir jemand den Fehler erklären??
Den Smargo kann ich mit Telnet an der Fritte ansprechen.
Die HD 02 Karte funzt im Schacht von ener Dream 800se mit CCcam und Scam
Danke Balu
Zuletzt bearbeitet von einem Moderator: