gelöst Oscam Hd+ HD02 Karte geht seit kurzen nicht mehr

[Oradigi]

Ich hatte im Oktober aufgrund der bekannten Sky Umstellungen in einer Drembox DM800SE einen lokalen HD02 Reader unter Oscam konfiguriert. Dier lief auch bis vor kurzen, aber seit heute nicht mehr. Geändert habe ihc an den Konfigurationen nichts.
Bin ratlos...
Logfile:

Spoiler

2019/12/19 21:59:03 0043B378 r   (reader) hd02_hdplus_card_black [internal] card detected
2019/12/19 21:59:04 0043B378 r   (reader) hd02_hdplus_card_black [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2019/12/19 21:59:06 0043B378 r   (reader) hd02_hdplus_card_black [internal] detect native nagra card
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [internal] ready for requests
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [internal] found card system nagra
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] ROM:    D N A S P 1 8 0
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] REV:    M e r 0 0 0
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] SER:    ############
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] CAID:   1843
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] Prv.ID: 00 00 34 11 (sysid)
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] Prv.ID: 00 00 00 00
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] IRD ID: ############
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] active to: 2019/12/18 11:59
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] -----------------------------------------
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] |id  |tier    |valid from  |valid to    |
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] +----+--------+------------+------------+
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] |8011|0066    |2012/10/26  |2013/10/27  |
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] |8011|0067    |2010/01/19  |2010/01/20  |
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] |8011|0BEA    |2019/10/23  |2020/10/23  |
2019/12/19 21:59:07 0043B378 r   (reader) hd02_hdplus_card_black [nagra] -----------------------------------------
2019/12/19 21:59:08 00000000 s     (main) init for all local cards done

Schalte ich jetzt auf einen HD+ Sender dann...

Spoiler

2019/12/19 21:46:05 3A109627 c   (dvbapi) Demuxer 0 found 11 ECMpids and 4 STREAMpids in caPMT
2019/12/19 21:46:05 3A109627 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19EE ANY CHID PMTPID 0062 VPID 02FF
2019/12/19 21:46:05 3A109627 c   (dvbapi) Demuxer 0 found 11 ECMpids and 4 STREAMpids in PMT
2019/12/19 21:46:05 3A109627 c      (ecm) anonymous (1843@000000/0000/EF76/89:5057FEA809BC2CEEA1AFDB924DCB90A8): not found (305 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 21:46:06 3A109627 c      (ecm) anonymous (1843@000000/0000/EF76/89:5057FEA809BC2CEEA1AFDB924DCB90A8): not found (80 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 21:46:06 3A109627 c      (ecm) anonymous (1843@000000/0000/EF76/89:5057FEA809BC2CEEA1AFDB924DCB90A8): not found (1 ms) by hd02_hdplus_card_black - kabel eins HD

Files:
oscam.server:

Spoiler

[reader]
label                         = hd02_hdplus_card_black
protocol                      = internal
device                        = /dev/sci0
key                           = 0102030405060708091011121314
caid                          = 1843
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cd
mhz                           = 540
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
saveemm-u                     = 1

oscam.dbvapi

Spoiler

#P: 09C4
#I: 0            
##############   HDplus HD02  ##################
#M: 1843:000000 1843:003411
P: 1843 1
#I: 1833

oscam.user

Spoiler

[account]
user                          = DM800HD_ClientA
description                   = local
au                            = 1
group                         = 1
cccmaxhops                    = 0

oscam.conf

Spoiler

[global]
logfile                       = /tmp/oscam.log
clienttimeout                 = 9999
clientmaxidle                 = 400
netprio                       = 1
nice                          = -1
usrfile                       = /tmp/oscamuser.log
#emmlogdir                     = /media/hdd
emmlogdir                     = /etc/tuxbox/oscam/
disablecrccws                 = 1

[cache]

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
user                          = local-hdfreak
boxtype                       = dreambox

[webif]
httpport                      = 88
httphelplang                  = de
httprefresh                   = 10
httphideidleclients           = 0
httpallowed                   = 10.0.0.1-192.168.254.254
hideclient_to                 = 15
httpemmgclean                 = 0

oscam.version

Spoiler

Unix starttime: 1576789142
Starttime:      19.12.2019 21:59:02
Version:        oscam-1.20_svn-r11517
Compiler:       mipsel-unknown-linux-gnu
Box type:       dm800se (generic)
PID:            3092
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/oscam/
WebifPort:      88

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            yes
IPv6 support:                            no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                yes
scam:                                    yes
serial:                                  yes
constant CW:                             yes
Pandora:                                 yes
ghttp:                                   yes

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       yes
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  no
cardreader_db2com:                       yes
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

Wer kann bitte helfen?

 

[DarkStarXxX]

Die Karte braucht EMMs

active to: 2019/12/18 11:59

 

[Smiley007]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = local-hdfreak
boxtype = dreambox

user = local

Oscam neu starten und das Startlog posten

 

[Oradigi]

Hallo... danke ich habe den Fehler gefunden...

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
#user                          = local-hdfreak
user                          = DM800HD_ClientA
boxtype                       = dreambox

Falscher User für dvbapi :coldsweat:

 

[filius00]

Falscher User für dvbapi

Du erzählst Stuss...
@Smiley007 hat geschrieben was nicht passt...
"local" heißt auch so und nicht 800 sonstwas

Man kann es auch vermatschen wie du es jetzt gedreht hast - viel Spass damit!

Richtig wäre
user = local
description = 800 sonstwas.....
wobei description gar nicht in den User sondern in den Server gehört.

 

[Oradigi]

Die Karte braucht EMMs

hat sie jetzt wieder verpasst bekommen.

2019/12/19 22:22:51 0043B378 r   (reader) hd02_hdplus_card_black [nagra] active to: 2020/02/09 11:59

Du erzählst Stuss...

den user kann ich doch bezeichnen:blush:, wie ich möchte

 

[Pilot]

den user kann ich doch bezeichnen:blush:, wie ich möchte

Nein
der username muß gleichlautend sein, wie der, der dvbapi drin steht.

 

[Oradigi]

Spoiler

2019/12/19 22:28:22 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:E5B04FD3B37C95A9929C80D516B082DA): found (373 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 22:28:28 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:E3E82513D58A9B0E1B71D5B542344439): found (360 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 22:28:34 0043B378 r   (reader) hd02_hdplus_card_black [nagra] DM800HD_ClientA emmtype=global, len=139 (hex: 0x8B), cnt=1: written (562 ms)
2019/12/19 22:28:43 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:32D5D0440E9292FEEE0B76E3CB0F3D35): found (362 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 22:28:47 0043B378 r   (reader) hd02_hdplus_card_black [nagra] DM800HD_ClientA emmtype=global, len=139 (hex: 0x8B), cnt=1: written (565 ms)
2019/12/19 22:28:58 0043B378 r   (reader) hd02_hdplus_card_black [nagra] DM800HD_ClientA emmtype=global, len=139 (hex: 0x8B), cnt=1: written (567 ms)
2019/12/19 22:28:59 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:15AB018FE68EBE246204E0FAA6DB31CA): found (897 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 22:29:13 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:A930D2844052E6D44F0F6360F1A701BB): found (356 ms) by hd02_hdplus_card_black - kabel eins HD
2019/12/19 22:29:28 3A109627 c      (ecm) DM800HD_ClientA (1843@000000/0000/EF76/89:0CA3F0C8135498A47EBA465A3E9D2795): found (361 ms) by hd02_hdplus_card_black - kabel eins HD

der username muß gleichlautend sein, wie der, der dvbapi drin steht.

Klar, und genau das war doch der Fehler!
Die dvbapi war in der oscam.conf für "local-hdfreak" enabled und das habe ich auf den einzigen user in der oscam.user "DM800HD_ClientA" geändert.
Damit wurden auch wieder EMMs geschrieben.

Danke an alle.