Raspberry Pi 3 B+ + Easymouse 2 Allgemeine Fragen

Koksderdrache · 8. September 2018

Hab es gelöst bekommen! Man hat beim Start die Auswahl gehabt Oscam zu installieren. Allerdings musste man separat über den Feed noch die Configs laden... Da muss erst einmal jemand drauf kommen...

bl0w · 8. September 2018

Dann mal die Configs anpassen und schauen ob sich die Box mit deinem Server verbindet und was hell wird. Am besten mal deine aktuellen configs vom Server und vom Client hier als Spoiler einstellen zur kontrolle

Koksderdrache · 8. September 2018

Laut der SImple Coonfig muss ich ja den server wie folgt bearbeiten:

oscam.server Beispiel

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.100.90,23456
user = user
password = passwd
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Bei mir sieht das nun so aus, basierend auf den configs, die mir bl0w korrigiert hat:

oscam.server auf Client

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.178.56,16002
user = receiver1
password = passwd
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Meine Frage,
oscam.user auf Server sieht so aus:

oscam.user

# OSCam Konfiguration IPC - oscam.user

[account]
user = receiver1
description = VKD
au = 1
group = 1

Was gebe ich bei Password an? oder lösche ich den befehl beim client einfach raus da nicht definiert?

Danke im voraus, mal wieder

EDIT:

Aktueller Log Server:

2018/09/08 12:09:47 00000000 s (main) System name = Linux
2018/09/08 12:09:47 00000000 s (main) Host name = raspi-ipc
2018/09/08 12:09:47 00000000 s (main) Release = 4.14.50-v7+
2018/09/08 12:09:47 00000000 s (main) Version = #1122 SMP Tue Jun 19 12:26:26 BST 2018
2018/09/08 12:09:47 00000000 s (main) Machine = armv7l
2018/09/08 12:09:47 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 12594
2018/09/08 12:09:47 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/08 12:09:47 00000000 s (main) signal handling initialized
2018/09/08 12:09:47 00000000 s (reader) G09 [mouse] creating thread for device /dev/ABO1
2018/09/08 12:09:47 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/08 12:09:47 00000000 s (main) waiting for local card init
2018/09/08 12:09:47 29BB5158 h (webif) webif: decompressed 177453 bytes back into 436236 bytes
2018/09/08 12:09:47 29BB5158 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75133
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 1 value 03 time_us 16545
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 2 value 40 time_us 21
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 3 value 57 time_us 16221
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 4 value 5b time_us 20
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 5 value bf time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 6 value f5 time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 7 value ff time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 8 value 3f time_us 51
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 9 value 33 time_us 14808
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 10 value f2 time_us 20
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 11 value 57 time_us 18
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 12 value 69 time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 13 value 00 time_us 21
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 14 value ad time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 15 value f5 time_us 18
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 16 value f0 time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 17 value fe time_us 19
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 18 value 3f time_us 15789
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 19 value 2d time_us 20
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 20 value cd time_us 18
2018/09/08 12:09:47 33147B75 r (reader) G09 [mouse] Flush readed byte Nr 21 value 3f time_us 20
2018/09/08 12:09:48 33147B75 r (reader) G09 [mouse] Buffers readed 21 bytes total time_us 139788
2018/09/08 12:09:48 33147B75 r (reader) G09 [mouse] Reader initialized (device=/dev/ABO1, detect=cd, mhz=357, cardmhz=357)
2018/09/08 12:09:48 33147B75 r (reader) G09 [mouse] card detected
2018/09/08 12:09:48 33147B75 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75117
2018/09/08 12:09:50 33147B75 r (reader) G09 [mouse] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2018/09/08 12:09:50 33147B75 r (reader) G09 [mouse] Kabel Deutschland G0x recognized
2018/09/08 12:09:50 33147B75 r (reader) G09 [mouse] Setting baudrate to 153600 bps
2018/09/08 12:09:50 33147B75 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75113
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Card type: KLPV
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Rom version: 10LM
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Credit available on card: 0 euro
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] FuseByte: 05
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Region Code:
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Country Code: DEU
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] Pincode read: 8220
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] PCB settings: FF FF FF FF
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] ready for requests
2018/09/08 12:09:51 33147B75 r (reader) G09 [mouse] found card system videoguard2
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] card detected
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] ------------------------------------------------------------------
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2018/09/08 12:09:51 33147B75 r (reader) G09 [videoguard2] +---------+----------+---------------------+---------------------+
2018/09/08 12:09:52 33147B75 r (reader) G09 [videoguard2] ------------------------------------------------------from-ins70--
2018/09/08 12:09:52 00000000 s (main) init for all local cards done
2018/09/08 12:09:52 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/09/08 12:09:52 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/09/08 12:09:52 00000000 s (anticasc) anti cascading disabled
2018/09/08 12:09:52 70BA1061 c (client) plain dvbapi-client granted (anonymous, au=off)
2018/09/08 12:09:52 70BA1061 c (dvbapi) dvbapi channelcache loaded from /var/etc/oscam.ccache
2018/09/08 12:09:52 70BA1061 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

Aktueller Log Client:

2018/09/08 12:09:58 00000000 s (main) System name = Linux
2018/09/08 12:09:58 00000000 s (main) Host name = dm520
2018/09/08 12:09:58 00000000 s (main) Release = 3.4-4.0-dm520
2018/09/08 12:09:58 00000000 s (main) Version = #31 SMP Tue Jul 18 10:13:41 CEST 2017
2018/09/08 12:09:58 00000000 s (main) Machine = mips
2018/09/08 12:09:58 00000000 s (main) Stb model = dm525
2018/09/08 12:09:58 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3089
2018/09/08 12:09:58 00000000 s (emu) OSCam-Emu version 769
2018/09/08 12:09:58 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/08 12:09:58 00000000 s (main) signal handling initialized
2018/09/08 12:09:58 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.178.56
2018/09/08 12:09:58 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/09/08 12:09:58 00000000 s (main) waiting for local card init
2018/09/08 12:09:58 3F7DB76D r (emu) Stream key delayer initialized
2018/09/08 12:09:58 3F7DB76D r (emu) Stream relay server initialized
2018/09/08 12:09:58 00000000 (emu) INFO: FFDecsa parallel mode = 64
2018/09/08 12:09:58 3F7DB76D r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/09/08 12:09:58 0830340E p (cccam) Remote-CCcam configuration error!
2018/09/08 12:09:58 0830340E p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.178.56:16002
2018/09/08 12:09:58 0830340E p (cccam) Remote-CCcam configuration error!
2018/09/08 12:09:58 6634DB02 h (webif) webif: decompressed 197118 bytes back into 471000 bytes
2018/09/08 12:09:58 6634DB02 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/09/08 12:09:59 3F7DB76D r (reader) emulator [emu] card detected
2018/09/08 12:10:00 3F7DB76D r (reader) emulator [emu] found card system emu
2018/09/08 12:10:00 3F7DB76D r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 12:10:00 3F7DB76D r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/09/08 12:10:00 00000000 s (main) init for all local cards done
2018/09/08 12:10:00 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/09/08 12:10:00 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/09/08 12:10:00 00000000 s (anticasc) anti cascading disabled
2018/09/08 12:10:00 4EC78519 c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2018/09/08 12:10:00 4EC78519 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/09/08 12:10:00 4EC78519 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/09/08 12:10:11 0830340E p (cccam) Remote-CCcam configuration error!
2018/09/08 12:11:42 0830340E p (-) -- Skipped 6 duplicated log lines --
2018/09/08 12:12:47 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:13:52 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:14:57 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:16:02 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:17:07 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:18:12 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:19:17 0830340E p (-) -- Skipped 5 duplicated log lines --
2018/09/08 12:20:22 0830340E p (-) -- Skipped 5 duplicated log lines --

Ich mach nun erst mal einen Sendersuchlauf und schau, ob ich die Privaten in HD rein bekomme.

bl0w · 8. September 2018

Du musst natürlich am Server (letzter Spoiler) auch ein Passwort vergeben.
Also einfach nach user= receiver1 noch eine Zeile mit password = passwd (selber wie im Reader an Client)

Koksderdrache · 8. September 2018

Hab ich angepasst und werde gleich berichten!

EDIT:

Server sagt:

2018/09/08 12:30:24 00000000 s (main) System name = Linux
2018/09/08 12:30:24 00000000 s (main) Host name = raspi-ipc
2018/09/08 12:30:24 00000000 s (main) Release = 4.14.50-v7+
2018/09/08 12:30:24 00000000 s (main) Version = #1122 SMP Tue Jun 19 12:26:26 BST 2018
2018/09/08 12:30:24 00000000 s (main) Machine = armv7l
2018/09/08 12:30:24 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 626
2018/09/08 12:30:24 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/08 12:30:24 00000000 s (main) signal handling initialized
2018/09/08 12:30:24 00000000 s (reader) G09 [mouse] creating thread for device /dev/ABO1
2018/09/08 12:30:24 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/08 12:30:24 00000000 s (main) waiting for local card init
2018/09/08 12:30:24 60A0FE98 h (webif) webif: decompressed 177453 bytes back into 436236 bytes
2018/09/08 12:30:24 60A0FE98 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75127
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 1 value 03 time_us 3292
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 2 value 40 time_us 15044
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 3 value 77 time_us 16238
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 4 value 5b time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 5 value bf time_us 26
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 6 value f5 time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 7 value ff time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 8 value 3f time_us 16049
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 9 value 33 time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 10 value f2 time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 11 value 57 time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 12 value 69 time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 13 value 00 time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 14 value ad time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 15 value f5 time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 16 value f0 time_us 24
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 17 value fe time_us 10
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 18 value 3f time_us 14511
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 19 value 2d time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 20 value cd time_us 11
2018/09/08 12:30:24 51661F43 r (reader) G09 [mouse] Flush readed byte Nr 21 value 3f time_us 11
2018/09/08 12:30:25 51661F43 r (reader) G09 [mouse] Buffers readed 21 bytes total time_us 141584
2018/09/08 12:30:25 51661F43 r (reader) G09 [mouse] Reader initialized (device=/dev/ABO1, detect=cd, mhz=357, cardmhz=357)
2018/09/08 12:30:25 51661F43 r (reader) G09 [mouse] card detected
2018/09/08 12:30:25 51661F43 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75119
2018/09/08 12:30:26 51661F43 r (reader) G09 [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2018/09/08 12:30:26 51661F43 r (reader) G09 [mouse] Kabel Deutschland G0x recognized
2018/09/08 12:30:26 51661F43 r (reader) G09 [mouse] Setting baudrate to 9600 bps
2018/09/08 12:30:27 51661F43 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75119
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] Card type: KLPV
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] Rom version: 10LM
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] Credit available on card: 0 euro
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] found card system videoguard2
2018/09/08 12:30:28 51661F43 r (reader) G09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 12:30:28 51661F43 r (reader) G09 [videoguard2] card detected
2018/09/08 12:30:28 51661F43 r (reader) G09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2018/09/08 12:30:28 51661F43 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75125
2018/09/08 12:30:29 51661F43 r (reader) G09 [mouse] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2018/09/08 12:30:29 51661F43 r (reader) G09 [mouse] Kabel Deutschland G0x recognized
2018/09/08 12:30:29 51661F43 r (reader) G09 [mouse] Setting baudrate to 153600 bps
2018/09/08 12:30:30 51661F43 r (reader) G09 [mouse] Buffers readed 0 bytes total time_us 75133
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Card type: KLPV
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Rom version: 10LM
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Credit available on card: 0 euro
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] FuseByte: 05
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Region Code:
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Country Code: DEU
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] Pincode read: 8220
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] PCB settings: FF FF FF FF
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] ready for requests
2018/09/08 12:30:31 51661F43 r (reader) G09 [mouse] found card system videoguard2
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] card detected
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] ------------------------------------------------------------------
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2018/09/08 12:30:31 51661F43 r (reader) G09 [videoguard2] +---------+----------+---------------------+---------------------+
2018/09/08 12:30:32 51661F43 r (reader) G09 [videoguard2] ------------------------------------------------------from-ins70--
2018/09/08 12:30:32 00000000 s (main) init for all local cards done
2018/09/08 12:30:32 00000000 s (anticasc) anti cascading disabled
2018/09/08 12:30:32 0B6D9887 c (client) plain dvbapi-client granted (anonymous, au=off)
2018/09/08 12:30:32 0B6D9887 c (dvbapi) dvbapi channelcache loaded from /var/etc/oscam.ccache
2018/09/08 12:30:32 0B6D9887 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2018/09/08 12:31:21 51661F43 r (reader) G09 [videoguard2] classD1 ins5C: failed
2018/09/08 12:32:45 51661F43 r (-) -- Skipped 6 duplicated log lines --

und Client Sagt:

1970/01/01 01:00:24 00000000 s (main) System name = Linux
1970/01/01 01:00:24 00000000 s (main) Host name = dm520
1970/01/01 01:00:24 00000000 s (main) Release = 3.4-4.0-dm520
1970/01/01 01:00:24 00000000 s (main) Version = #31 SMP Tue Jul 18 10:13:41 CEST 2017
1970/01/01 01:00:24 00000000 s (main) Machine = mips
1970/01/01 01:00:24 00000000 s (main) Stb model = dm525
1970/01/01 01:00:24 00000000 s (main) The current system time is smaller than the build date (May 25 2018). Waiting up to 60 seconds for time to correct
2018/09/08 12:31:25 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 231
2018/09/08 12:31:26 00000000 s (emu) OSCam-Emu version 769
2018/09/08 12:31:26 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/08 12:31:26 00000000 s (main) signal handling initialized
2018/09/08 12:31:26 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.178.56
2018/09/08 12:31:26 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/09/08 12:31:26 00000000 s (main) waiting for local card init
2018/09/08 12:31:26 15E6E4AF r (emu) Stream key delayer initialized
2018/09/08 12:31:26 15E6E4AF r (emu) Stream relay server initialized
2018/09/08 12:31:26 15E6E4AF r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/09/08 12:31:26 00000000 (emu) INFO: FFDecsa parallel mode = 64
2018/09/08 12:31:26 7813E38D p (reader) 192.168.178.56: resolved ip=192.168.178.56
2018/09/08 12:31:26 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:31:26 43AC3263 h (webif) webif: decompressed 197118 bytes back into 471000 bytes
2018/09/08 12:31:26 43AC3263 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/09/08 12:31:27 15E6E4AF r (reader) emulator [emu] card detected
2018/09/08 12:31:28 15E6E4AF r (reader) emulator [emu] found card system emu
2018/09/08 12:31:28 15E6E4AF r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 12:31:28 15E6E4AF r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/09/08 12:31:28 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:31:28 7813E38D p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.178.56:16002
2018/09/08 12:31:28 00000000 s (main) init for all local cards done
2018/09/08 12:31:28 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/09/08 12:31:28 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/09/08 12:31:28 00000000 s (anticasc) anti cascading disabled
2018/09/08 12:31:28 48A8D831 c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2018/09/08 12:31:28 48A8D831 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/09/08 12:31:28 48A8D831 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/09/08 12:31:41 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:31:43 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:31:54 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:31:56 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:32:07 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:32:09 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:32:20 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:32:22 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:32:29 48A8D831 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C7 ECM_PID: 1AC1 PROVID: 000000
2018/09/08 12:32:29 48A8D831 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1861 ECM_PID: 1ABD PROVID: 000000
2018/09/08 12:32:29 48A8D831 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1834 ECM_PID: 1AC0 PROVID: 000000
2018/09/08 12:32:29 48A8D831 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09FD ECM_PID: 1ABF PROVID: 000000
2018/09/08 12:32:29 48A8D831 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/09/08 12:32:30 48A8D831 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT
2018/09/08 12:32:33 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:32:34 48A8D831 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/09/08 12:32:35 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:32:38 48A8D831 c (dvbapi) Demuxer 0 stop descrambling program number C35F (09C7@000000:C35F unknown)
2018/09/08 12:32:39 48A8D831 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in PMT
2018/09/08 12:32:46 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:32:48 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:32:59 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:33:01 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:33:12 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:33:14 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:33:25 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:33:27 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:33:38 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:33:40 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:33:51 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:33:53 7813E38D p (cccam) init error from reader Remote-CCcam
2018/09/08 12:34:04 7813E38D p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:16002
2018/09/08 12:34:06 7813E38D p (cccam) init error from reader Remote-CCcam

Und Pro7HD bleibt dunkel.

bl0w · 8. September 2018

Dein Client kann sich nicht zum Server Connection. Da stimmt noch was in der config nicht.

Ah ich glaube ich habs:

am Server muss in der oscam.user folgendes stehen:

[account]
user = receiver1
pwd = receiver1
description = VKD
group = 1
au = 1

am client muss die oscam.server so aussehen:

[reader]
label = raspi
description = Oscam on raspi
protocol = cccam
device = ip,port
user = receiver1
password = receiver1
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
ccckeepalive = 1

Koksderdrache · 8. September 2018

Ich glaube ich habe den Fehler gefunden.

In der OScam.conf auf dem Server hätte ich den Punkt Server IP unter cccam nicht korrigiert. OScam.conf auf Server sieht nun so aus:

[global]
serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096

[cccam]
port = xxxxx
serverip = 192.168.178.56
version = 2.3.0
reshare = 1
stealth = 1
updateinterval = 20
recv_timeout = 4000

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 11500
user = mdvbapi
boxtype = pc

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0

bl0w · 8. September 2018

Du musst den Port den du in deiner oscam.conf unter [cccam] eingetragen hast (ist bei der gerade xxxxx) auch in der oscma.server am client verwenden.
Der Port 16002 ist der Port von deinem Webinterface und darf nicht in der oscam.server eingetragen sein.

Koksderdrache · 8. September 2018

Also lösche ich den Eintrag am Client raus und ersetze ihn auch durch x oder muss ich einen freien Port sowohl auf Server, als auch auf Client definieren?

bl0w · 8. September 2018

Ja genau du musst am Server einen Port definieren (anstatt xxxxx, ich würde irgendwas zwischen 40000 und 50000 nehmen) und den selben port auch am client dann in der oscam.server angeben (device = 192.168.178.56,PORT)

Koksderdrache · 8. September 2018

Okay super, werde ich direkt ausprobieren.

EDIT:
WIr kommen der Sache näher. Nun meckern er, dass die Zugangsdaten usr/pwd Invalid sind

2018/09/08 13:04:49 00000000 s (main) System name = Linux
2018/09/08 13:04:49 00000000 s (main) Host name = dm520
2018/09/08 13:04:49 00000000 s (main) Release = 3.4-4.0-dm520
2018/09/08 13:04:49 00000000 s (main) Version = #31 SMP Tue Jul 18 10:13:41 CEST 2017
2018/09/08 13:04:49 00000000 s (main) Machine = mips
2018/09/08 13:04:49 00000000 s (main) Stb model = dm525
2018/09/08 13:04:49 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1475
2018/09/08 13:04:49 00000000 s (emu) OSCam-Emu version 769
2018/09/08 13:04:49 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/08 13:04:49 00000000 s (main) signal handling initialized
2018/09/08 13:04:49 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.178.56
2018/09/08 13:04:49 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/09/08 13:04:49 00000000 s (main) waiting for local card init
2018/09/08 13:04:49 71519413 p (reader) 192.168.178.56: resolved ip=192.168.178.56
2018/09/08 13:04:49 71519413 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:41234
2018/09/08 13:04:49 7B7CAA43 r (emu) Stream key delayer initialized
2018/09/08 13:04:49 7B7CAA43 r (emu) Stream relay server initialized
2018/09/08 13:04:49 7B7CAA43 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/09/08 13:04:49 00000000 (emu) INFO: FFDecsa parallel mode = 64
2018/09/08 13:04:49 62010238 h (webif) webif: decompressed 197118 bytes back into 471000 bytes
2018/09/08 13:04:49 62010238 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/09/08 13:04:50 7B7CAA43 r (reader) emulator [emu] card detected
2018/09/08 13:04:50 71519413 p (cccam) cccam(r) Remote-CCcam: login failed, usr/pwd invalid
2018/09/08 13:04:50 71519413 p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.178.56:41234
2018/09/08 13:04:51 7B7CAA43 r (reader) emulator [emu] found card system emu
2018/09/08 13:04:51 7B7CAA43 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/08 13:04:51 7B7CAA43 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/09/08 13:04:51 00000000 s (main) init for all local cards done
2018/09/08 13:04:51 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/09/08 13:04:51 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/09/08 13:04:51 00000000 s (anticasc) anti cascading disabled
2018/09/08 13:04:51 0E029F69 c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2018/09/08 13:04:51 00000000 >> OSCam << cardserver log switched, version nn2-git-1528-r7, build r (mipsel-oe-linux)
2018/09/08 13:04:51 0E029F69 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/09/08 13:04:51 0E029F69 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/09/08 13:05:03 71519413 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:41234
2018/09/08 13:05:04 71519413 p (cccam) cccam(r) Remote-CCcam: login failed, usr/pwd invalid
2018/09/08 13:05:16 71519413 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:41234
2018/09/08 13:05:17 71519413 p (cccam) cccam(r) Remote-CCcam: login failed, usr/pwd invalid
2018/09/08 13:05:29 71519413 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:41234
2018/09/08 13:05:30 71519413 p (cccam) cccam(r) Remote-CCcam: login failed, usr/pwd invalid
2018/09/08 13:05:42 71519413 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.56:41234
2018/09/08 13:05:43 71519413 p (cccam) cccam(r) Remote-CCcam: login failed, usr/pwd invalid

Auf dem Server muss die Config unter OScam.user logischer weise zu den OScam.server auf dem Client passen, richtig?

Also so:
OScam.user auf Server:

[account]
user = receiver1
password = 123456
description = VKD
au = 1
group = 1

OScam.server auf Client:

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.178.56,41234
user = receiver1
password = 123456
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Sollte doch so passen, oder?

bl0w · 8. September 2018

Fast

Am Server muss es in der oscam.user so heißen:

[account]
user = receiver1
pwd = 123456
description = VKD
au = 1
group = 1

Koksderdrache · 8. September 2018

Und siehe da, es werde Licht. Meine Güte bin ich begeistert.
Wand soll ich sagen? Danke, ich bin wirklich begeistert über eure Geduld und Hilfsbereitschaft. Kenne ich so auch anders!

Das bedeutet jetzt konkret, dass ich Sky auf die g09 buchen lassen kann und in der Theorie nichts weiter machen muss an der Config?!
Wenn ich jetzt das ganze übers Internet machen möchte, läuft das ganze über Dyndns und ich muss anstelle der lokalen Server IP eben die dyndns eintragen und portforwarding für 41234 in der Fritte einstellen, richtig?

Kannst du mir ggf auch noch eine Beispiel Config für mehrere User nennen? Im übrigen kommt meine HD+ Karte Montag an, dann geht es entsprechend um einen zweiten Reader und vermutlich das konfigurieren von einer 2. Gruppe, richtig?

bl0w · 8. September 2018

Na sehr gut das klingt doch super.

Ja genua du kannst dir nun Sky auf die G09 aufschalten lassen und das sollte dann ohne Anpassungen funktionieren.
Wenn du das ganze von außen machen möchtest, musst du wie du richtige gesagt hast an der Fritte den Port 41234 freigeben und an den Raspi weiterschicken.
Von außen gibt man dann am client in der oscam.server einfach device = dyndns,41234 ein und damit verbindet man sich dann zu dir aufn raspi

Wenn du noch mehr user am server haben willst, dann musst du einfach den ganzenen eintrag kopieren und drunter wieder einfügen also zum beispiel:

[account]
user = receiver1
pwd = 123456
description = VKD
au = 1
group = 1

[account]
user = receiver2
pwd = 1234567
description = VKD
au = 1
group = 1

[account]
user = receiver3
pwd = 12345678
description = VKD
au = 1
group = 1

[account]
user = receiver4
pwd = 123456789
description = VKD + SAT
au = 1
group = 1,2

Wenn deine HD+ Karte kommt, dann musst du die am Server unter oscam.server (da wo deine G09 eingerichtet ist) einrichten und ich würde dort dann group = 2 vergeben.
Dann musst du den usern (siehen mein spoiler drüber) einfach group = 1,2 mitgeben (die die sat und kabel haben) und dann bekommen auch nur die das HD+ weitergegeben

Der Eintrag für die HD02 sieht dann so aus:

[reader]
label = HD02
protocol = mouse
device = /dev/HD02
autospeed = 0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
cardmhz = 368
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1

Koksderdrache · 8. September 2018

Perfekt. Kopiere ich mir so schon mal ab.

Eine letzte Frage: Gibt es Erfahrungswerte wie viel user man mit meiner Config stabil versorgen kann?

Suche

Suche

Raspberry Pi 3 B+ + Easymouse 2 Allgemeine Fragen

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

bl0w

Power Elite User

Koksderdrache

Ist gelegentlich hier

Ähnliche Themen

Spenden Unterstützung