Pogoplug E02 Debian Cardserver mit IPC

[Osprey]

AW: Pogoplug E02 Debian Cardserver mit IPC

Hi, sehr gute Entscheidung. Achte darauf das es Typ E02 ist. Und nochwas du brauchst dich hier nicht entschuldigen wenn du eine Frage hast. Die Mods hier sind schwer okay egal ob joopastron oder mxer...
Du bist ja nicht im ci Modul Bereich LG Osprey

 

[Zoran78]

AW: Pogoplug E02 Debian Cardserver mit IPC

ich suche gerade Ebay, Amazon etc durch. Was ist eigentlich, wenn der Pogoplug gebraucht ist und der Besitzer diesen schonmal angemeldet hat?
Habe ich dadurch Nachteile?

 

[Osprey]

AW: Pogoplug E02 Debian Cardserver mit IPC

Bei Amazon sind das neue und e02. Gebraucht geht auch aber wenn der vorbesitzer denn schon angemeldet hat in der Cloud ist etwas umständlich, die in californien müssen den für dich freischalten oder du gehst seriell drauf. Lieber 5.- Euro mehr und bei Amazon neu.

 

[Ruska]

AW: Pogoplug E02 Debian Cardserver mit IPC

Am besten ... Komplett die Datei leeren & dann die Zeilen einfügen !!!
Und schauen bei Copy & past , das keine Leerzeichen am Anfang der Zeilen sind.

Genau die Zeilen kopieren , vom HowTo .



Also ich komme nicht weiter.
Vielleicht kann jemand mir erklären
wie ich
1: die Datei leeren kann
2: die Zeilen aus dem How To einfügen kann
3: Welche Tasten für Copy & past ich drücken muß.
Sorry dass ich mich so dumm anstelle. Gibt es eine Hilfeanweisung für Putty.
Gruß
Ruska

 

[Alex]

AW: Pogoplug E02 Debian Cardserver mit IPC

1: die Datei leeren kann

Lösch die Datei mit folgendem Befehl:

rm -f /etc/apt/sources.list

Dann die Datei neu anlegen und mit dem Editor öffnen:

nano /etc/apt/sources.list

Zum Schluss mit STRG+O und STRG+X spreichern

2: die Zeilen aus dem How To einfügen kann

Mit 'nem simplen Rechtsklick

3: Welche Tasten für Copy & past ich drücken muß.

Wenn du aus Putty was rauskopieren willst einfach nur kopieren, landet dann automatisch in der Zwischenablage

 

[Ruska]

AW: Pogoplug E02 Debian Cardserver mit IPC

Jetzt läuft das Upgraden. Vielen Dank für die Hilfe.
Was ich aber noch immer nicht verstehe, sind die Felder unten bei Putty zum Beispiel Get Help ^G . Was muß ich da machen um wirklich Hilfe zu bekommen ?
Bei diesen Feldern bin ich noch ratlos was anzuklicken ist um das gewünschte Eregebnis zu bekommen.
Gruß Ruska

 

[Alex]

AW: Pogoplug E02 Debian Cardserver mit IPC

Get Help ^G

Da verwechselst du was. Das sind Optionen im Editor "nano"
Wenn du puuty verwendest musst du dich damit anfreunden, mit der Tastatur zu arbeiten, nicht mit der Maus.

^G steht in diesem Fall für STRG+G

 

[schnuffy1de]

AW: Pogoplug E02 Debian Cardserver mit IPC

Hi
Welchen reader könnt ihr empfehlen für die v13 und Pogo?

Sent from my Nokia Lumia 820 using Tapatalk

 

[Alex]

AW: Pogoplug E02 Debian Cardserver mit IPC

Easymouse 2 oder Apollreader

 

[lct]

An dir ist ein Lehrer verloren gegangen ALEX
Gut erklärt!!!

gesendet über Tapetalk

 

[yallah2001]

AW: Pogoplug E02 Debian Cardserver mit IPC

Hallo zusammen,


Ich bekomme irgenwie Samba nicht ans laufen
es scheitert bei der HDD einbindung
Bis zu diesen Punkt geht alles
diesen Befehl wird leider nicht angenommen

mount –t ntfs-3g /dev/sdb1 /media/share

weiter unten der Log

Spoiler

login as: root
root@192.168.178.100's password:
Linux pimpmypogo 3.2.0-4-kirkwood #1 Debian 3.2.46-1 armv5tel
Willkommen am Debian CS-Server IPC
IPC Befehle : ipc : i
CCcam Befehle : cccam : c
OScam Befehle : oscam : o
NewCS Befehle : newcs : n
Camd3 Befehle : camd3 : c3
sBox Befehle : sbox : s
Last login: Thu Nov 28 12:17:09 2013 from 192.168.178.112
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes
255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd4c090ed

Device Boot Start End Blocks Id System
/dev/sdb1 2 1953519615 976759807 83 Linux
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000204883968 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525164 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd783d39d

Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953521663 976759808 83 Linux
root@pimpmypogo ~ > apt-get update
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates Release.gpg
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates Release
Hit

Sie müssen registriert sein, um Links zu sehen.

stable Release.gpg
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge Release.gpg
Hit

Sie müssen registriert sein, um Links zu sehen.

stable Release
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge Release
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/main Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/contrib Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/non-free Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/main armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/contrib armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/non-free armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/contrib Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/main Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/main Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/updates/non-free Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge Release.gpg
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/contrib Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge/contrib armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/non-free Sources
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/main armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/contrib armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/non-free armel Packages
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/contrib Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/main Translation-en
Ign

Sie müssen registriert sein, um Links zu sehen.

sarge/contrib Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

stable/non-free Translation-en
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge Release
Hit

Sie müssen registriert sein, um Links zu sehen.

sarge/contrib armel Packages
Ign

Sie müssen registriert sein, um Links zu sehen.

sarge/contrib Translation-en
Reading package lists... Done
root@pimpmypogo ~ > apt-get install ntfs-3g
Reading package lists... Done
Building dependency tree
Reading state information... Done
ntfs-3g is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
samba is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > mount ntfs-3g /dev/sdb1 /media/sharemount
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount /dev/sdb2 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share

Vielen dank für eure Hilfe

Gruß

 

[Osprey]

AW: Pogoplug E02 Debian Cardserver mit IPC

Hi,
Laut fdisk-l hat deine sdb1 schon ein Linux Format sodass du nicht auf ntfs mounten musst. LG Osprey

 

[mxer]

AW: Pogoplug E02 Debian Cardserver mit IPC

mount point /media/share does not exist ---> Also erstmal den Ordner anlegen.

Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? ---> Du mußt /dev/sdb nehmen, nicht /dev/sdb1.

 

[yallah2001]

AW: Pogoplug E02 Debian Cardserver mit IPC

Hallo,



vielen dank fürs schnelle Feedback
Ich glaube ich habe alle Kommandos ausprobiert
aber es will einfach nicht mounten
was mache ich bloss falsch?


verzweifelte Grüsse

Spoiler

Reading state information... Done
samba is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > mount ntfs-3g /dev/sdb1 /media/sharemount
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount /dev/sdb2 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb': Invalid argument
The device '/dev/sdb' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb /media/sharemount
mount: mount point /media/sharemount does not exist
root@pimpmypogo ~ > mount /dev/sdb /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > nano /etc/samba/smb.conf
root@pimpmypogo ~ > mount /dev/sdb /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t /dev/sdb /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000204883968 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525164 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd783d39d

Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953521663 976759808 83 Linux
root@pimpmypogo ~ >
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/share
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb /media/share
NTFS signature is missing.
Failed to mount '/dev/sdb': Invalid argument
The device '/dev/sdb' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t /dev/sdb /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t /dev/sdb1 /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t /dev/sdb1 /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ >

 

[Osprey]

AW: Pogoplug E02 Debian Cardserver mit IPC

Yo, lass das ntfs-3g weg wenn es keine ntfs Partition ist.
mount /dev/sdb1 /media/share