override.conf ? Was mach ich falsch

[rupfnudel]

hallo erst mal,
bin absoluter anfänger mit linux.habe es so weit das vdr läuft. ( nach 2wochen :emoticon-0144-nod
mein problem ist das die hd-sender von sky nicht laufen. sc funkt eigendlich ganz gut. denn ORF und HD+ und sky-s laufen auch.
ich kann nur keinen log machen, weil ich im sc-plugin im OSD Menü Meldungsprotokolierung->Log to Syslog. nichts hab?

an override.conf hab ich viele versucht ohne erfolg.

Spoiler

#ecmprio:{S19.2E:}0d05:0500:1843:1833:1702
#tunnel:{1833:S19.2E:}1702:nagra-beta
#ignore:{*}alle:anderen:CAIDs

#ecmprio:{S19.2E:}1843:1702:1833
#tunnel:{1833:S19.2E:}1702:nagra-beta

#tunnel:{1833::}1702:nagra-beta

ecmprio:{S19.2E:}1702:1833
tunnel:{1833:S19.2E:}1702:nagra-beta
tunnel:{1834:S19.2E:}1722:nagra-beta

#ecmprio:{S19.2E:}1702:1833
#tunnel:{1833::]1702:nagra-beta
#tunnel:{1834::}1722:nagra-beta

#tunnel:{1834:s:}1722:nagra-beta

(mate-system-log) geht, aber kann da nichts raus lesen!

läuft ein sky-sender (sd) kommt der syslog:

Nov 11 11:42:49 andi-GA-78LMT-S2P vdr: message repeated 6 times: [ [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [discovery] Received valid discovery message VDR xineliboutput DISCOVERY 1.0#015#012Client: 255.255.255.255:37890#015#012#015
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server address: 127.0.0.1#015#012Server version: xineliboutput-2.0.0-cvs#015#012#015
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Client 0 connected: 127.0.0.1:43257
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262144 bytes
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Trying PIPE connection ...
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1386
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] removing /var/lib/vdr/plugins/xineliboutput/pipes.1386
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cBackgroundWriterI initialized (buffer 2048 kb)
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cTcpWriter initialized (buffer 2048 kb)
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Pipe open
Nov 11 11:42:52 andi-GA-78LMT-S2P vdr: [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:43:16 andi-GA-78LMT-S2P vdr: message repeated 8 times: [ [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:43:17 andi-GA-78LMT-S2P vdr: [1386] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Nov 11 11:43:19 andi-GA-78LMT-S2P vdr: [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory

dann auf ein sky- (hd) sender:

Nov 11 11:42:49 andi-GA-78LMT-S2P vdr: message repeated 6 times: [ [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [discovery] Received valid discovery message VDR xineliboutput DISCOVERY 1.0#015#012Client: 255.255.255.255:37890#015#012#015
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server address: 127.0.0.1#015#012Server version: xineliboutput-2.0.0-cvs#015#012#015
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Client 0 connected: 127.0.0.1:43257
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262144 bytes
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Trying PIPE connection ...
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1386
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] removing /var/lib/vdr/plugins/xineliboutput/pipes.1386
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cBackgroundWriterI initialized (buffer 2048 kb)
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] cTcpWriter initialized (buffer 2048 kb)
Nov 11 11:42:51 andi-GA-78LMT-S2P vdr: [1642] [xine..put] Pipe open
Nov 11 11:42:52 andi-GA-78LMT-S2P vdr: [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:43:16 andi-GA-78LMT-S2P vdr: message repeated 8 times: [ [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:43:17 andi-GA-78LMT-S2P vdr: [1386] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Nov 11 11:43:19 andi-GA-78LMT-S2P vdr: [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:45:01 andi-GA-78LMT-S2P vdr: message repeated 34 times: [ [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [1386] switching to channel 360
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [4695] TS buffer on device 1 thread ended (pid=1386, tid=4695)
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [4694] buffer stats: 114116 (2%) used
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [4694] receiver on device 1 thread ended (pid=1386, tid=4694)
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [4731] receiver on device 1 thread started (pid=1386, tid=4731, prio=high)
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [4732] TS buffer on device 1 thread started (pid=1386, tid=4732, prio=high)
Nov 11 11:45:02 andi-GA-78LMT-S2P vdr: [1386] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [1386] retuning due to modification of channel 360
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [1386] switching to channel 360
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [4732] TS buffer on device 1 thread ended (pid=1386, tid=4732)
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [4731] buffer stats: 59784 (1%) used
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [4731] receiver on device 1 thread ended (pid=1386, tid=4731)
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [4734] receiver on device 1 thread started (pid=1386, tid=4734, prio=high)
Nov 11 11:45:03 andi-GA-78LMT-S2P vdr: [4735] TS buffer on device 1 thread started (pid=1386, tid=4735, prio=high)
Nov 11 11:45:04 andi-GA-78LMT-S2P vdr: [1667] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory

bei HD+ kommt das:

Nov 11 11:59:15 andi-GA-78LMT-S2P wpa_supplicant[801]: wlan0: CTRL-EVENT-SCAN-STARTED
Nov 11 11:59:40 andi-GA-78LMT-S2P vdr: message repeated 14 times: [ [4986] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory]
Nov 11 11:59:41 andi-GA-78LMT-S2P vdr: [4968] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Nov 11 11:59:43 andi-GA-78LMT-S2P vdr: [4986] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4986] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4968] switching to channel 169
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4993] TS buffer on device 1 thread ended (pid=4968, tid=4993)
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4992] buffer stats: 468684 (11%) used
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4992] receiver on device 1 thread ended (pid=4968, tid=4992)
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [5015] receiver on device 1 thread started (pid=4968, tid=5015, prio=high)
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [5016] TS buffer on device 1 thread started (pid=4968, tid=5016, prio=high)
Nov 11 11:59:46 andi-GA-78LMT-S2P vdr: [4968] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [4968] retuning due to modification of channel 169
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [4968] switching to channel 169
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [5016] TS buffer on device 1 thread ended (pid=4968, tid=5016)
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [5015] buffer stats: 43052 (1%) used
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [5015] receiver on device 1 thread ended (pid=4968, tid=5015)
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [5017] receiver on device 1 thread started (pid=4968, tid=5017, prio=high)
Nov 11 11:59:48 andi-GA-78LMT-S2P vdr: [5018] TS buffer on device 1 thread started (pid=4968, tid=5018, prio=high)
Nov 11 11:59:49 andi-GA-78LMT-S2P vdr: [4986] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264: Found NAL SPS at offset 6/151
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: profile_idc 100
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: pic_width: 120 mbs
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: pic_height: 34 mbs
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: frame only flag: 0
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: MBAFF
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: cropping 0 0 0 2
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: aspect_ratio_idc 1
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] H.264 SPS: -> video size 1920x1080, aspect 1:1
Nov 11 11:59:51 andi-GA-78LMT-S2P vdr: [5017] [xine..put] Detected video size 1920x1080
Nov 11 11:59:52 andi-GA-78LMT-S2P vdr: [4986] ERROR (lirc.c,43): /var/run/lirc/lircd: No such file or directory

was mach ich falsch?

hab auch noch das gelesen ...Damit der tunnel funktioniert benötigt das sc-plugin neben "cardclient" noch die "nagra" Erweiterung (nicht sc_nagra). ?
ich selber hab aber unter synaptic nur die install.

Nagra system for vdr-plugin-sc
Cryptoworks system for vdr-plugin-sc
Cardclient system for vdr-plugin-sc

mit "nagra" allein finde ich bei mir nichts! (in synaptic ) wie bekomm ich das !

bin für tip dankbar:ja

 

[dippes]

Mit Karten HD+ 1830 und S02 1702 sollte das so aussehen.

Den Rest löschen

tunnel:{1833:S19.2E:}1702:nagra-beta
ignore:{*}0648:1837:1843:09c4:0d95:098c:09af:09c7:1722:1861:1860:0d00:0500:0b00:1817:1818:1819
ecmprio:{S19.2E:}1830:1702:1833

wenn deine Karten nicht local sind reicht cardclient.

 

[rupfnudel]

AW: override.conf ? Was mach ich falsch

danke dir dippes,
habs mal versucht,
und es läuft :emoticon-0117-talki