oscam update - keine karten werden mehr erkannt!?

[chross]

Hallo Leute!

Hab vorhin ein oscam-Update gemacht (auf meiner Freetzbox) und nun erscheint immer ein Error bei der Karte bzw. dem Reader.

Der oscam-Log gibt folgendes aus:

Spoiler

2013/10/25 19:50:15 571510 r SkyS02 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/10/25 19:50:16 571510 r SkyS02 [mouse] Warning: Card returned error on setting ifsd value to 251
2013/10/25 19:50:17 571510 r SkyS02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/25 19:50:18 571510 r SkyS02 [mouse] T1 Resync command error, trying to reactivate!
2013/10/25 19:50:20 571510 r SkyS02 [mouse] ATR: 3F ..... 43 36 61
2013/10/25 19:50:20 571510 r SkyS02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/25 19:50:20 571510 r SkyS02 [mouse] Setting baudrate to 187500 bps
2013/10/25 19:50:20 571510 r SkyS02 [mouse] Calculated work ETU is 5.33 us
2013/10/25 19:50:20 571510 r SkyS02 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/10/25 19:50:21 571510 r SkyS02 [mouse] Warning: Card returned error on setting ifsd value to 251
2013/10/25 19:50:21 571510 r SkyS02 [mouse] card system not supported
2013/10/25 19:50:21 571510 r SkyS02 [mouse] Normal mode failed, reverting to Deprecated Mode
2013/10/25 19:50:22 571510 r SkyS02 [mouse] ATR: 3F FF 95 ...... 36 61
2013/10/25 19:50:22 571510 r SkyS02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/25 19:50:22 571510 r SkyS02 [mouse] Calculated work ETU is 62.00 us
2013/10/25 19:50:22 571510 r SkyS02 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/10/25 19:50:23 571510 r SkyS02 [mouse] Warning: Card returned error on setting ifsd value to 251
2013/10/25 19:50:24 571510 r SkyS02 [mouse] detect native nagra card
2013/10/25 19:50:25 571510 r SkyS02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/25 19:50:26 571510 r SkyS02 [mouse] T1 Resync command error, trying to reactivate!
2013/10/25 19:50:28 571510 r SkyS02 [mouse] ATR: 3F FF ..... 52 65 76 47 43 36 61
2013/10/25 19:50:28 571510 r SkyS02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/25 19:50:28 571510 r SkyS02 [mouse] Setting baudrate to 187500 bps
2013/10/25 19:50:28 571510 r SkyS02 [mouse] Calculated work ETU is 5.33 us
2013/10/25 19:50:28 571510 r SkyS02 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/10/25 19:50:29 571510 r SkyS02 [mouse] Warning: Card returned error on setting ifsd value to 251
2013/10/25 19:50:30 571510 r SkyS02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/25 19:50:31 571510 r SkyS02 [mouse] T1 Resync command error, trying to reactivate!
2013/10/25 19:50:32 571510 r SkyS02 [mouse] ATR: 3F FF 95 00 FF......34 32 20 52 65 76 47 43 36 61
2013/10/25 19:50:32 571510 r SkyS02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/25 19:50:32 571510 r SkyS02 [mouse] Setting baudrate to 187500 bps
2013/10/25 19:50:32 571510 r SkyS02 [mouse] Calculated work ETU is 5.33 us
2013/10/25 19:50:32 571510 r SkyS02 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/10/25 19:50:33 571510 r SkyS02 [mouse] Warning: Card returned error on setting ifsd value to 251
2013/10/25 19:50:33 571510 r SkyS02 [mouse] card system not supported
2013/10/25 19:50:33 571510 r SkyS02 [mouse] card initializing error

Habt ihr da eine Idee?

oscam.server:

Spoiler

[reader]
label = SkyS02
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 2
emmcache = 1,3,2
mhz = 600
cardmhz = 600

 

[wylly31]

AW: oscam update - keine karten werden mehr erkannt!?

Nimm mal Fritzbox vom Strom und starte neu. Wenn das nichts bringt gehe mal auf eine etwas niedrigere Version.