Oscam seit heute Morgen down

[analog0815]

Hallo,



seit heute Morgen ist mein TV Bild schwarz. Kann mir jmd evtl. sagen was los ist? :smile:

Spoiler

2020/01/04 14:37:44 00000000 s (main) System name = Linux
2020/01/04 14:37:44 00000000 s (main) Host name = oc
2020/01/04 14:37:44 00000000 s (main) Release = 4.19.66-v7+
2020/01/04 14:37:44 00000000 s (main) Version = #1253 SMP Thu Aug 15 11:49:46 BST 2019
2020/01/04 14:37:44 00000000 s (main) Machine = armv7l
2020/01/04 14:37:44 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 672
2020/01/04 14:37:44 00000000 s (config) services reloaded: 0 services freed, 16 services loaded, rejected 0
2020/01/04 14:37:44 00000000 s (config) userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2020/01/04 14:37:44 00000000 s (main) signal handling initialized
2020/01/04 14:37:44 00000000 s (config) 9 provid's loaded
2020/01/04 14:37:44 00000000 s (config) 161 service-id's loaded in 3 ms
2020/01/04 14:37:44 00000000 s (config) 16 tier-id's loaded
2020/01/04 14:37:44 00000000 s (led) LED support is not active. Can't detect machine type.
2020/01/04 14:37:44 00000000 s (net) monitor: Bind request failed (Cannot assign requested address), waiting another 119 seconds
2020/01/04 14:37:45 00000000 s (net) monitor: Bind request failed (Cannot assign requested address), waiting another 118 seconds
2020/01/04 14:37:46 00000000 s (net) monitor: initialized (fd=5, port=9999, ip=192.168.178.20)
2020/01/04 14:37:46 00000000 s (net) cs378x: initialized (fd=6, port=8888, ip=192.168.178.20)
2020/01/04 14:37:46 00000000 s (net) cccam: initialized (fd=7, port=11111)
2020/01/04 14:37:47 00000000 s (reader) KDG09 [mouse] creating thread for device /dev/ttyUSB0
2020/01/04 14:37:47 00000000 s (reader) vierK [cccam] creating thread for device 192.168.178.20
2020/01/04 14:37:47 00000000 s (main) waiting for local card init
2020/01/04 14:37:47 752C9AB1 p (reader) 192.168.178.20: resolved ip=192.168.178.20
2020/01/04 14:37:47 752C9AB1 p (reader) vierK [cccam] connecting to 192.168.178.20:11111
2020/01/04 14:37:47 0A895B9A h (webif) webif: decompressed 175903 bytes back into 426012 bytes
2020/01/04 14:37:47 0A895B9A h (webif) HTTP Server running. ip=0.0.0.0 port=83
2020/01/04 14:37:47 4B6F126E r (reader) KDG09 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2020/01/04 14:37:47 4B6F126E r (reader) KDG09 [mouse] card detected
2020/01/04 14:37:48 4B6F126E r (reader) KDG09 [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2020/01/04 14:37:48 4B6F126E r (reader) KDG09 [mouse] Setting baudrate to 9600 bps
2020/01/04 14:37:49 752C9AB1 p (cccam) init error from reader vierK
2020/01/04 14:37:49 752C9AB1 p (reader) vierK [cccam] proxy initialized, server 192.168.178.20:11111
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [mouse] Card type: KLPV
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [mouse] Rom version: 10LM
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [mouse] Credit available on card: 0 euro
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [mouse] found card system videoguard2
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [videoguard2] card detected
2020/01/04 14:37:50 4B6F126E r (reader) KDG09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2020/01/04 14:37:51 4B6F126E r (reader) KDG09 [mouse] ATR: 3F AA 15 99 02 50 00 78 33 B0 45 69 FF 4A 50 F0 69 03 4B 4C 03
2020/01/04 14:37:51 4B6F126E r (reader) KDG09 [mouse] Setting baudrate to 153600 bps
2020/01/04 14:37:52 4B6F126E r (reader) KDG09 [mouse] Card type: KLPV
2020/01/04 14:37:52 4B6F126E r (reader) KDG09 [mouse] Rom version: 10LM
2020/01/04 14:37:52 4B6F126E r (reader) KDG09 [mouse] Credit available on card: 0 euro
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] FuseByte: 25
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] Region Code: DEU00001
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] Country Code: DEU
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] Pincode read: 4444
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] PCB settings: FF FF FF FF
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] ready for requests
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [mouse] found card system videoguard2
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] card detected
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] ------------------------------------------------------------------
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] +---------+----------+---------------------+---------------------+
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0012 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 001a --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0013 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 001e --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 001f --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0028 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0038 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 003a --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 003c --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 003e --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 007b --| 2020/01/03-00:00:00 | SKY Unbekannt [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 007d --| 2020/01/03-00:00:00 | Sky Sport SD [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0081 --| 2020/01/03-00:00:00 | Sky Bundesliga [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 008e --| 2020/01/03-00:00:00 | Beate Uhse [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00e4 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00e5 --| 2020/01/03-00:00:00 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00fa --| 2020/01/03-00:00:00 | SKY Unbekannt [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00f3 --| 2020/01/03-00:00:00 | Blue Movie SD Info [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00f4 --| 2020/01/03-00:00:00 | KD Unbekannt [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00fe --| 2020/01/03-00:00:00 | KD Unbekannt [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 00ff --| 2020/01/03-00:00:00 | SKY Unbekannt [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 01 ---|-- 012d --| 2020/01/22-00:00:02 |
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 01 ---|-- 0133 --| 2020/01/22-00:00:02 | KD Kabel Privat HD [NDS]
2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] ------------------------------------------------------from-ins70--
2020/01/04 14:37:54 00000000 s (main) init for all local cards done
2020/01/04 14:37:54 00000000 s (emmcache) loaded 7 emmcache records from /usr/local/etc/oscam.emmcache in 1 ms
2020/01/04 14:37:54 00000000 s (emmcache) loaded 7 emmstat records from /usr/local/etc/oscam.emmstat in 1 ms
2020/01/04 14:37:54 00000000 s (anticasc) anti cascading disabled
2020/01/04 14:37:54 6BB9F4CE c (client) plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2020/01/04 14:37:54 6BB9F4CE c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2020/01/04 14:37:54 6BB9F4CE c (dvbapi) ERROR: Could not detect DVBAPI version.
2020/01/04 15:07:39 752C9AB1 p (reader) vierK [cccam] connecting to 192.168.178.20:11111


2020/01/04 15:13:45 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2020/01/04 15:13:45 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Tier expired
2020/01/04 15:13:45 0C2CBFC4 c (ecm) solo (09C7/0065/A6): not found (75 ms) by KDG09 - Universal TV HD
2020/01/04 15:13:46 0C2CBFC4 c (ecm) solo (1834/0065/89): rejected caid (0 ms) (invalid caid 0x1834)
2020/01/04 15:13:47 0C2CBFC4 c (ecm) solo (1861/0065/89): rejected caid (0 ms) (invalid caid 0x1861)
2020/01/04 15:13:48 0C2CBFC4 c (ecm) solo (09FD/0065/39): rejected caid (0 ms) (invalid caid 0x09FD)
2020/01/04 15:13:53 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2020/01/04 15:13:53 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Tier expired
2020/01/04 15:13:53 0C2CBFC4 c (ecm) solo (09C7/0065/A6): not found (79 ms) by KDG09 - Universal TV HD
2020/01/04 15:13:54 0C2CBFC4 c (ecm) solo (1834/0065/89): rejected caid (0 ms) (invalid caid 0x1834)
2020/01/04 15:13:55 0C2CBFC4 c (ecm) solo (1861/0065/89): rejected caid (0 ms) (invalid caid 0x1861)
2020/01/04 15:13:56 0C2CBFC4 c (ecm) solo (09FD/0065/39): rejected caid (1 ms) (invalid caid 0x09FD)

Besten Dank.

 

[ghost0815]

EMM´s geblockt?

Wie Poste ich im OScam Bereich richtig

Hallo Zusammen, leider kam es in der Vergangenheit immer wieder dazu, dass sich Leute nicht richtig aritkulieren konnten. Daher möchten wir euch auf diesem Wege mal zeigen, welche Informationen eure Post von Problemen, Fragen etc. enthalten sollten. Aber bevor ihr hier eine Frage zum x-ten mal...

www.digital-eliteboard.com

Deine Tiers sind abgelaufen..

2020/01/04 14:37:53 4B6F126E r (reader) KDG09 [videoguard2] |-- 00 ---|-- 0012 --| 2020/01/03

 

[analog0815]

Hallo ghost0815,

danke für deine Antwort. Wie kann ich diese wieder aktivieren/verlängern? habe ich zum ersten Mal so eine Sache.

Viele Grüße

 

[waves]

Blocker rausnehmen, oder die Configs hier posten.

 

[analog0815]

besten Dank für eure Hilfe. Hier meine configs (Server):

Spoiler

oscam.config
[global]
logfile = /usr/local/etc/oscam/oscam.log
nice = -1
maxlogsize = 2560
preferlocalcards = 2
emmlogdir = /usr/local/etc/oscam/emm.log
ecmfmt = c/s/l

[cache]

[cs378x]
port = 88888
serverip = 192.168.178.20

[cccam]
port = 11111
nodeid = FCFA3ED11053159C
version = 2.3.0
reshare = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapi
boxtype = dreambox

[monitor]
port = 9999
serverip = 192.168.178.20

[webif]
httpport = 83
httpuser = xxxx
httppwd = xxxx
httpcss = /usr/local/etc/carbon.v3.css
httptpl = /usr/local/etc/picon/
httppiconpath = /usr/local/etc/picon/
httphelplang = de
httprefresh = 30
httphidetype = You
httpshowpicons = 1
httppiconsize = 50
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server
[reader]
label = KDG09
protocol = mouse
device = /dev/ttyUSB0
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
ident = 09C7:000000
group = 1
emmcache = 1,3,2,0
ndsversion = 2

[reader]
label = vierK
protocol = cccam
device = 192.168.178.20,11111
user = xxx
password = xxx
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

ocam.user
[account]
user = test1
pwd = test1
caid = 09C7
monlevel = 1
au = 1
group = 1
cccmaxhops = 1
cccreshare = 1

[account]
user = test2
pwd = test12
group = 1

[account]
user = dvbapi
suppresscmd08 = 1
au = 1
group = 1

edit: Spoiler angepasst. hoffe es klappt wieder

 

[waves]

Bitte Spoiler verwenden.....

Configs vom Client der au machen soll?

Was sind Server und Client für Geräte?

Wenn Du im Webinterface unter Reader schaust, kommen da überhaupt irgendwelche EMM'S?

 

[cojo]

teile deine server mal in verschiedene Groups auf,als group = 1 und group = 2
eim User machst du dann mal au = KDG09
Danach Oscam neu starten

 

[waves]

Welcher Moderator da auch jetzt gerade editiert hat...... es wäre schon sinnvoll so zu editieren, dass nicht dreiviertel der Configs weg sind......

 

[Pilot]

Das war ich.
Leider weiß ich nicht, wie das passiert ist.
Hoffentlich kann der TE die Configs ergänzen
Bitte um Entschuldigung

 

[datamen]

@Pilot @waves .... Das ist mehr ein Fehler in der Boardsoftware !!

Ist mir schon öfter aufgefallen das in "langen Spoilern" der kleine Text "Zum Vergrößern anklicken ..." fehlt.

1 - 2 mal F5 und bisschen warten hilft meistens ........

 

[waves]

@Pilot

Shit happens :smirk: :mask:

 

[analog0815]

meinen config post habe ich angepasst. ich probier das mal mit den Gruppen aus

und hier die vom client:

Spoiler

oscam.config
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface

oscam.server
[reader]
label = vierK
protocol = cccam
device = 192.168.178.20,11111
user = test1
password = test1
keepalive = 1
reconnecttimeout = 60
group = 1

oscam.user
[account]
user = dvbapi
au = 1
group = 1

Bitte Spoiler verwenden.....

Configs vom Client der au machen soll?

Was sind Server und Client für Geräte?

Wenn Du im Webinterface unter Reader schaust, kommen da überhaupt irgendwelche EMM'S?

sorry hatte ich überlesen. configs client habe ich gepostet, server ist ein raspberry pi 3 sowie eine Duo2 und eine zero4k . unter den Readern bei EMM steht überall eine null. beim log kommt jetzt folgendes:

Spoiler

• (ecm) test (09C7/C35C/69): not found (71 ms) by KDG09
• 2020/01/04 17:57:32 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2020/01/04 17:57:32 0FABF50E c (ecm) test (09C7/C35C/69): not found (60 ms) by KDG09
• 2020/01/04 17:57:42 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2020/01/04 17:57:42 0FABF50E c (ecm) test (09C7/C35C/69): not found (53 ms) by KDG09
• 2020/01/04 17:57:52 4B6F126E r (reader) KDG09 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2020/01/04 17:57:52 0FABF50E c (ecm) test (09C7/C35C/69): not found (51 ms) by KDG09

 

[cojo]

Du sollst nicht im log schauen

Wenn Du im Webinterface unter Reader schaust, kommen da überhaupt irgendwelche EMM'S?

 

[waves]

server ist ein raspberry pi 3

Warum ist in Deinen Configs dann hier ein dvbapi angelegt? Und dann auch noch mit Boxtype dreambox?
Sorry, aber weißt Du wozu das überhaupt da ist?

Wozu ist der zweite Reader ins eigene Netzwerk? Noch irgendeine Karte in irgendeinem anderen Gerät? Wenn ja, warum nicht im Raspi?

Scheint so, als wäre das eine etwas größere Baustelle.......

 

[analog0815]

Hallo zurück,

danke für eure Rückmeldungen. Ich habe mal die Zeit genutzt und ein bisschen rumgespielt. Bild habe wieder hinbekommen. Ab und zu ruckelt es, aber nicht übermäßig. Ich habe jetzt folgende EInstellungen:

Spoiler: Oscam Server (raspi 3)

CONFIG
[global]
logfile = /usr/local/etc/oscam/oscam.log
nice = -1
maxlogsize = 2560
preferlocalcards = 1
emmlogdir = /usr/local/etc/oscam/emm.log
ecmfmt = c/s/l

[cache]

[cccam]
port = 11111
nodeid = FCFA3ED11053159C
version = 2.3.0
reshare = 1

[webif]
httpport = 83
httpuser = user
httppwd = pwd
httphelplang = de
http_prepend_embedded_css = 1
httprefresh = 30
httppiconsize = 50
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

USER1 (VU Duo2)
[account]
user = user1
pwd = user1
caid = 09C7
monlevel = 1
au = 1
group = 1
cccmaxhops = 1
cccreshare = 1

USER2 (VU zero4K)
[account]
user = user2
pwd = user2
group = 1

Oscam.Server
[reader]
label = KDG09
protocol = mouse
device = /dev/ttyUSB0
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
ident = 09C7:000000
group = 1
emmcache = 1,3,2,0
ndsversion = 2

[reader]
label = vierK
protocol = cccam
device = 192.168.178.20,11111
user = user3
password =user3
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Spoiler: Config Duo2

oscam.config
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = user1
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface


User
[account]
user = user1
pwd =user1
au = 1
group = 1


OScam.server
[reader]
label = vierK
protocol = cccam
device = 192.168.178.20,11111
user = user1
password = user1
keepalive = 1
reconnecttimeout = 60
group = 1

Spoiler: zero4k

oscam.config
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = user3
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface

User
[account]
user = user3
password = user3
group = 1

OScam.server
[reader]
label = vierK
protocol = cccam
device = 192.168.178.20,11111
user = user3
password = user3
keepalive = 1
reconnecttimeout = 60
group = 2

Ich habe aber das Gefühl, dass das irgendwie noch nicht so rund ist. Bin über Verbesserungsvorschläge glücklich

Einen schönen Abend noch.