Support OSCAM Probleme mit OpenELEC+Easymouse2

Killamp · 13. Dezember 2015

Hallo zusammen

Ich habe mir vor kurzem einen Raspberry Pi 2b mit OpenELEC als Betriebssystem und einer Easymouse 2 zusammen gesteckt.
Diese Konstellation soll bei mir, mein neuer TV Server werden. Ich habe über Openelec das OSCam r10615 Paket installiert.
Die Easymouse habe ich an einem USB Hub mit Externen Stromversorgung anschlossen.

Die Treiber sind alle installiert und die Mouse wird mir über SSH auch korrekt angezeigt.

Es handelt sich bei meiner Karte um eine UM02

Ich habe das Problem das er meine Karte einfach nicht entschlüssel will.
Aus meiner Sicht erkennt er auch die Karte aber irgendwie zickt OSCAM rum. Die UM02 läuft in meiner Gigablue einwandfrei.
Und ich habe hier 2x ne Easymouse liegen und bei beiden kommt der selbe Fehler, weswegen ich einen Hardwaredefekt ausschließe.
Ich muss einen Konfigurationsfehler gemacht habe und wollte euch bitten mal drüber zu schauen.

Bei der Easymouse selbst sind alle 4 schalter nach unten Richtung Kartenslot geschoben.
5V
phoenix Modus
3.58 MHz

Das wird mir im Log angezeigt beim Starten von OSCAM.

2015/12/13 18:13:39 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75125
2015/12/13 18:13:39 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75122
2015/12/13 18:13:39 569050 r (reader) UM02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2015/12/13 18:13:40 569050 r (reader) UM02 [mouse] card detected
2015/12/13 18:13:40 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75129
2015/12/13 18:13:41 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75136
2015/12/13 18:13:42 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75122
2015/12/13 18:13:43 569050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:13:44 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75119
2015/12/13 18:13:45 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75121
2015/12/13 18:13:46 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75137
2015/12/13 18:13:48 569050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:13:48 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75127
2015/12/13 18:13:49 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75156
2015/12/13 18:13:50 569050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75133
2015/12/13 18:13:52 569050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:13:52 569050 r (reader) UM02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/13 18:13:52 569050 r (reader) UM02 [mouse] card initializing error

Hoffe ihr könnt mir Helfen.

LG

dodo83 · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

wenn die Easymouse auf 358 eingestellt ist sollte auch der wert im Reader stehen, nicht 368

am besten die Maus auf 6MHZ stellen und im Reader MHZ auf 600, läuft erfahrungsgemäß besser

Killamp · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

Wow danke für die Fixe Antwort das ging ja echt schnell

Hab eben mal als erstes die werte 368 auf 358 korrigiert. hat leider nichts gebracht und als Zweites dann 6MHZ eingestellt und Werte angepasst. Leider immer noch der selbe Fehler

Hast du evtl. noch eine andere Idee

LG Killamp

dodo83 · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

Maus per Dip Schalter auf UNTEN UNTEN OBEN OBEN und im Reader mhz = 600 ?
neu gestartet mal?

bitte log ab start der oscam auch posten

Killamp · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

...genau die Dip stehen auf UNTEN UNTEN= Richtung Karte und OBEN OBEN weg von der Karte

Das Log nach einem Kompletten Reboot des RPi

2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 69 value 00 time_us 14217
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 70 value 0e time_us 11651
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 71 value f0 time_us 37
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 72 value 00 time_us 14039
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 73 value 0e time_us 12736
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 74 value f0 time_us 55
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 75 value 00 time_us 14308
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 76 value 0e time_us 11343
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 77 value f0 time_us 235
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 78 value 00 time_us 13994
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 79 value 0e time_us 11358
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 80 value f0 time_us 1359
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 81 value 00 time_us 14336
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 82 value 0e time_us 11433
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 83 value f0 time_us 31
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 84 value 00 time_us 14129
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 85 value 0e time_us 11295
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 86 value f0 time_us 1310
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 87 value 00 time_us 14236
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 88 value 0e time_us 11461
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 89 value f0 time_us 38
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 90 value 00 time_us 14090
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 91 value 0e time_us 11524
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 92 value f0 time_us 1261
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 93 value 00 time_us 14422
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 94 value 0e time_us 11376
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 95 value f0 time_us 28
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 96 value 00 time_us 14279
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 97 value 0e time_us 11295
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 98 value f0 time_us 1339
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 99 value 00 time_us 14157
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 100 value 0e time_us 11582
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 101 value f0 time_us 28
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 102 value 00 time_us 14177
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 103 value 0e time_us 11367
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 104 value f0 time_us 1226
2015/12/13 18:45:05 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 105 value 00 time_us 14209
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 186 value 00 time_us 14162
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 187 value 0e time_us 11400
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 188 value f0 time_us 70
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 189 value 00 time_us 14212
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 190 value 0e time_us 11630
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 191 value f0 time_us 1069
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 192 value 00 time_us 14324
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 193 value 0e time_us 11239
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 194 value f0 time_us 32
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 195 value 00 time_us 14117
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 196 value 0e time_us 11198
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 197 value f0 time_us 1315
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 198 value 00 time_us 14137
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 199 value 0e time_us 11174
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 200 value f0 time_us 37
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 201 value 00 time_us 14376
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 202 value 0e time_us 11224
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 203 value f0 time_us 1262
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 204 value 00 time_us 13940
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 205 value 0e time_us 11299
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 206 value f0 time_us 1377
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 207 value 00 time_us 14130
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 208 value 0e time_us 11101
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 209 value f0 time_us 30
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 210 value 00 time_us 14020
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 211 value 0e time_us 12711
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 212 value f0 time_us 29
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 213 value 00 time_us 13783
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 214 value 0e time_us 11249
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 215 value f0 time_us 1226
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 216 value 00 time_us 14380
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 217 value 0e time_us 11165
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 218 value f0 time_us 26
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 219 value 00 time_us 13981
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Buffers readed 219 bytes total time_us 2007304
2015/12/13 18:45:06 9C7050 r (reader) UM02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
2015/12/13 18:45:07 9C7050 r (reader) UM02 [mouse] card detected
2015/12/13 18:45:07 9C7050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75135
2015/12/13 18:45:09 9C7050 r (reader) UM02 [mouse] ATR: FF FF FE EE FF FE FE 0E FF CE FF FF FF
2015/12/13 18:45:09 9C7050 r (reader) UM02 [mouse] ERROR: Could not read reader->convention
2015/12/13 18:45:09 9C7050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:45:09 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 1 value fe time_us 52811
2015/12/13 18:45:09 9C7050 r (reader) UM02 [mouse] Buffers readed 1 bytes total time_us 128087
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 1 value 0e time_us 2727
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 2 value f8 time_us 1427
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 3 value 0e time_us 5435
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 4 value 0e time_us 6874
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 5 value fe time_us 32
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 6 value ff time_us 2526
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 7 value fe time_us 4317
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 8 value ee time_us 9768
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 9 value fe time_us 5204
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 10 value fe time_us 4041
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 11 value ce time_us 5738
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 12 value ee time_us 4013
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 13 value 0e time_us 5504
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Flush readed byte Nr 14 value fe time_us 1622
2015/12/13 18:45:11 9C7050 r (reader) UM02 [mouse] Buffers readed 14 bytes total time_us 136615
2015/12/13 18:45:12 9C7050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75129
2015/12/13 18:45:13 9C7050 r (reader) UM02 [mouse] ATR: 0E 0E E0 0E E0 0E FF EE 0E
2015/12/13 18:45:13 9C7050 r (reader) UM02 [mouse] ERROR: Could not read reader->convention
2015/12/13 18:45:13 9C7050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:45:14 9C7050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75133
2015/12/13 18:45:15 9C7050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75150
2015/12/13 18:45:16 9C7050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75169
2015/12/13 18:45:17 9C7050 r (reader) UM02 [mouse] Error activating card.
2015/12/13 18:45:18 9C7050 r (reader) UM02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/13 18:45:18 9C7050 r (reader) UM02 [mouse] card initializing error

dodo83 · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

tue mal den Reader direkt mal am PI anschließen

2015/12/13 18:45:13 9C7050 r (reader) UM02 [mouse] ATR: 0E FE 0E E0 FE 0E E0 0E E0 0E E0 0E E0 0E E0 0E E0 0E FF EE 0E

2015/12/13 18:45:13 9C7050 r (reader) UM02 [mouse] ERROR: Could not read reader->convention

an der Config sollte es nicht liegen

Killamp · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

Hab jetzt mal die Mouse direkt angeschlossen, geht aber leider immer noch in einen Error

2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 26 value 7d time_us 11169
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 27 value 35 time_us 12781
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 28 value f5 time_us 11407
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 29 value 73 time_us 11279
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 30 value d3 time_us 11405
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 31 value b3 time_us 15533
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 32 value fb time_us 11509
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 33 value b5 time_us 11159
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 34 value 59 time_us 11421
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 35 value 91 time_us 11335
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 36 value 1d time_us 11305
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 37 value f3 time_us 12468
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 38 value 93 time_us 11116
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Flush readed byte Nr 39 value b7 time_us 11163
2015/12/13 18:59:00 8311B8 r (reader) UM02 [mouse] Buffers readed 39 bytes total time_us 515301
2015/12/13 18:59:01 8311B8 r (reader) UM02 [mouse] ATR: 3F FF 95 00 FF 91 34 32 20 62 65 76 48 30 36 12
2015/12/13 18:59:01 8311B8 r (reader) UM02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/12/13 18:59:01 8311B8 r (reader) UM02 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2015/12/13 18:59:01 8311B8 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75161
2015/12/13 18:59:01 8311B8 r (reader) UM02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/12/13 18:59:02 8311B8 r (reader) UM02 [mouse] Warning: Card returned error on setting ifsd value to 251
2015/12/13 18:59:03 8311B8 r (reader) UM02 [mouse] detect native nagra card
2015/12/13 18:59:04 8311B8 r (reader) UM02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/12/13 18:59:05 8311B8 r (reader) UM02 [mouse] T1 Resync command error, trying to reactivate!
2015/12/13 18:59:05 8311B8 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75139
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] ATR: 3F FF 95 3F FF 95 49 4E 41 53 50 31 34 50 20 52 65 76 47 30 36 12
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] Init card protocol T15, FI=1, F=372, D=1, N=255
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] Setting baudrate to 9600 bps
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] ERROR: Parse_ATR returned error
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] ERROR: Unknown protocol type 15
2015/12/13 18:59:06 8311B8 r (-) -- Skipped 1 duplicated log lines --
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] card system not supported
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/13 18:59:06 8311B8 r (reader) UM02 [mouse] card initializing error

EDIT: Habs geschafft. Hab wieder alle Dips nach unten gestellt auf 358mhz und die Mouse direkt angeschlossen es funktioniert. Danke für deine Hilfe

Killamp · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

Zu früh gefreut. Er hat die Karte wieder mit nem Error drin stehen nach dem ich ein TV Programm angemacht habe und zum nächsten geschaltet hab. UFF das ist ja zum verrückt werden

2015/12/13 19:17:53 C6E050 r (reader) UM02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/12/13 19:17:53 C6E050 r (reader) UM02 [mouse] Card responded ok for ifsd request of 251
2015/12/13 19:17:54 C6E050 r (reader) UM02 [mouse] detect native nagra card
2015/12/13 19:17:56 C6E050 r (reader) UM02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/12/13 19:17:56 C6E050 r (reader) UM02 [mouse] T1 Resync command succesfull ifsc = 251
2015/12/13 19:17:58 C6E050 r (reader) UM02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/12/13 19:17:58 C6E050 r (reader) UM02 [mouse] T1 Resync command succesfull ifsc = 251
2015/12/13 19:17:58 C6E050 r (reader) UM02 [mouse] card system not supported
2015/12/13 19:17:58 C6E050 r (reader) UM02 [mouse] Normal mode failed, reverting to Deprecated Mode
2015/12/13 19:17:58 C6E050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75208
2015/12/13 19:18:00 C6E050 r (reader) UM02 [mouse] ATR: 3F FF 95 00 FF 91 61 81 FE 47 00 44 4E 41 53 50 55 34 39 20 52 65 76 47 30 36 12
2015/12/13 19:18:00 C6E050 r (reader) UM02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/12/13 19:18:00 C6E050 r (reader) UM02 [mouse] Calculated work ETU is 103.91 us reader mhz = 358
2015/12/13 19:18:00 C6E050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75138
2015/12/13 19:18:00 C6E050 r (reader) UM02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/12/13 19:18:02 C6E050 r (reader) UM02 [mouse] Warning: Card returned error on setting ifsd value to 251
2015/12/13 19:18:03 C6E050 r (reader) UM02 [mouse] detect native nagra card
2015/12/13 19:18:04 C6E050 r (reader) UM02 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/12/13 19:18:06 C6E050 r (reader) UM02 [mouse] T1 Resync command error, trying to reactivate!
2015/12/13 19:18:06 C6E050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75129
2015/12/13 19:18:08 C6E050 r (reader) UM02 [mouse] ATR: 3F FF 3F FF 95 00 FF 91 91 71 FE 47 00 44 4K 41 53 78 31 34 32
2015/12/13 19:18:08 C6E050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75708
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] Warning: D=0 is invalid, forcing D=1
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] Init card protocol T0, FI=3, F=744, D=1, N=149
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] Setting baudrate to 4800 bps
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] Calculated work ETU is 207.82 us reader mhz = 358
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] Buffers readed 0 bytes total time_us 75134
2015/12/13 19:18:09 C6E050 r (reader) UM02 [mouse] ATR Fsmax is 8 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/12/13 19:18:13 C6E050 r (reader) UM02 [mouse] card system not supported
2015/12/13 19:18:13 C6E050 r (reader) UM02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/13 19:18:13 C6E050 r (reader) UM02 [mouse] card initializing error

dodo83 · 13. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

andere Easymouse?
oder mal nur das USB Kabel tauschen...
wenn du es Direkt angeschlossen hast, dein Netzteil ist auch ausreichend?

Killamp · 14. Dezember 2015

AW: OSCAM Probleme mit OpenELEC+Easymouse2

...mit der anderen Mouse war genau das gleiche. Ich hab aber das Problem gestern noch beseitigen können. Die Treiber habe ich noch einmal neu eingespielt dann ging es.

Danke und LG

Suche

Suche

Support OSCAM Probleme mit OpenELEC+Easymouse2

Killamp

Newbie

dodo83

Killamp

Newbie

dodo83

Killamp

Newbie

dodo83

Killamp

Newbie

Killamp

Newbie

dodo83

Killamp

Newbie

Ähnliche Themen

Spenden Unterstützung