gelöst OSCAM läuft aber leider keine EMM: Der Client ist ein HTPC mit Mediaportal und Digital-Devices Cine V2 TV-Karte

[LennyW]

Hallo!
Nachdem die Entschlüsselung mit meiner V13 in einer Easymouse an einer Synology DS413j jetzt läuft, fehlen mir noch die EMM für die Verlängerung. Der Client ist ein HTPC mit Mediaportal und Digital-Devices Cine V2 TV-Karte. Ich schätze, dass ich dazu noch einen Fehler in den Einstellungen habe. Kann mir dabei jemand helfen?

Server:

Spoiler: oscam.conf

[global]
logfile = /var/packages/oscam/target/var/log/oscam.log
logduplicatelines = 1
pidfile = /var/packages/oscam/target/var/run/oscam.pid
clientmaxidle = 0
nice = -10
maxlogsize = 100
waitforcards = 0
dropdups = 1
lb_mode = 0
lb_save = 300
lb_retrylimit = 900
lb_stat_cleanup = 48
lb_savepath = /var/packages/oscam/target/var/log/stat
ecmfmt = [CAID:c] [PID] [SID:s] [L:l]
failbantime = 120
failbancount = 5

[newcamd]
port = 9001@0B01:000000
key = 11223344556677889900AABBCCDD
keepalive = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
listen_port = 11500
delayer = 1
user = user1
boxtype = pc

[cs357x]
port = 23145
suppresscmd08 = 1

[cccam]
port = 16001
nodeid =
version = 2.3.0
reshare = 1
reshare_mode = 1
stealth = 1
updateinterval = 20

[webif]
httpport = 9000
httpuser =
httppwd =
httpscript = /var/packages/oscam/target/etc/script
httptpl = /var/packages/oscam/target/etc/template
httprefresh = 5
httpshowmeminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 120

Spoiler: oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11218
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = user1
pwd = user1
au = 1
group = 1

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11218
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skyv13
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ins7e11 = 15
ndsversion = 2
disablecrccws_only_for = 09C4:000000;098C:000000;098D:000000

Client:

Spoiler: oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11381
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 1
logfile = stdout
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
usrfile = /tmp/user.log

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
listen_port = 11500
delayer = 1
user = user1
boxtype = pc

[webif]
httpport = 80
httpuser = oscam
httppwd =
httphelplang = de
httpallowed = 127.0.0.1
httpemmsclean = 256

Spoiler: oscam.user

[account]
user = user1
au = 1
group = 1

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11381
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V13
protocol = cs357x
device = 192.168.178.50,23145
user = user1
password = user1
inactivitytimeout = 30
group = 1
disablecrccws = 1
cccversion = 2.3.0
disablecrccws_only_for = 0500:050F00;09C4:000000;098C:000000;098D:000000

Ich habe bestimmt irgendwo etwas vergessen. Kann mir jemand helfen?

LG LennyW

 

[Tec-Hi]

Hi

wurde für beide Geräte mindestens die r11517 empfehlen,
könnte man die oscam.version des Clienten einseihen,
zu Finden In WebIF der OScam unter Files -> oscam.version,
so wie Log vom Start an des Servers.

HF

 

[LennyW]

Beim Oscam Server kann ich r11517 bestätigen

Spoiler: oscam version

Unix starttime: 1557851473
Starttime: 14.05.2019 18:31:13
Version: oscam-1.20_svn-r11517
Compiler: arm-marvell-linux-gnueabi-ssl-libusb-pcsc
Box type: generic (generic)
PID: 6535
TempDir: /volume1/@appstore/oscam/var/log
GBox tmp_dir: not defined using: /volume1/@appstore/oscam/var/log
ConfigDir: /volume1/@appstore/oscam/etc/
WebifPort: 9000

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: no
IPv6 support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

Oscam Win aus mdvbapi scheint Version r11381 zu sein. Wie kann ich das aktualisieren?
Ich hätte auch kein Problem damit die EMM manuell einzutragen. Ich bräuchte nur die Quelle.
Alternativ könnte ich auch mit DeltaCam und der Karte nur die EMM loggen. Das wäre aber ziemlich aufwendig.

LG LennyW

 

[Tec-Hi]

Hi

noch den Log vom Start an des Servers,

Teste mal die :

HF

 

[black86]

Denke zwar nicht dass es eine Rolle spielt aber cccversion = 2.3.0 bei cs357x brauchst du in oscam.server beim Client nicht.

 

[Oller]

Der server und der client sind doch laut deiner IP im gleichen Netz. Wieso gehst du dann mit der mdvbapi nicht direkt auf den server ?

 

[LennyW]

@Tec-Hi : werde ich heute abend versuchen, danke!
@black86: kann ich ja mal löschen und versuchen, ob es einen Unterschied macht
@Oller: Ja, Server und Client sind im gleichen Netz. Ich hatte es in den diversen Anleitungen, die ich verwendet habe so verstanden, dass ich beide OSCAM benötige und bin sehr froh, dass es funktioniert. Ich poste später mal meine mdvbapi.ini. Daran sollte man doch erkennen können wie mdvbapi konfiguriert ist, oder?

Vielen Dank an alle die mir hier helfen!

 

[Oller]

Die Oscam im PC brauchst du nur wenn der server in einem anderen Netz ist oder die dvbapi vom server schon in benutzung ist ( wenn der server ein receiver ist ). In deinem Fall ist aber beides nicht zutreffend. Trage in die mdvbapi.ini einfach die IP vom server ein.
Und dann noch über die WebIF vom server in die oscam.dvbapi P : 09C4 eintragen

 

[Tec-Hi]

Hi

gehts hier gar nicht mehr, um "OSCAM läuft aber leider keine EMM" ?

HF

 

[LennyW]

Doch, das ist das Problem. Wenn ich mein System aber vereinfachen kann ist das für die Fehlersuche vielleicht hilfreich. Ich schaue mal nach was ich eingetragen habe.

Mmmmmh! Es sieht so aus als würde die mdvdapi.ini schon direkt auf den Server verweisen. Dann ist die OSCAM am Client wohl inaktiv, vermute ich.
In der ini steht:

Spoiler: mdvdapi.ini

[oscam]
host=192.168.178.50
port=11500

[options]
debug=31

In der oscam.dbvapi steht nur :"File does not exist or no file selected!"

Was muss ich da eintragen um EMM zu erhalten?

 

[pehedima]

Es handelt sich in erster Linie nicht um ein oscam Problem.

Der Client ist ein HTPC mit Mediaportal und Digital-Devices Cine V2 TV-Karte

mit

... mdvbapi ...

Der Client ist für das senden von EMMs zuständig und der hat mit oscam selbst nichts zu tun.
Schau mal bzgl. der mdvbapi Konfiguration in unserem DVBViewer Bereich.

Weiterhin wäre mal die oscam.log von Server sinnvoll, damit wir mal sehen was da überhaupt läuft.

 

[LennyW]

Danke!

Spoiler: oscam live log

• 2019/05/15 18:21:34 00000000 s (main) System name = Linux
• 2019/05/15 18:21:34 00000000 s (main) Host name = WissNAS
• 2019/05/15 18:21:34 00000000 s (main) Release = 2.6.32.12
• 2019/05/15 18:21:34 00000000 s (main) Version = #23824 Tue Feb 12 16:48:38 CST 2019
• 2019/05/15 18:21:34 00000000 s (main) Machine = armv5tel
• 2019/05/15 18:21:34 00000000 s (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 8664
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2019/05/15 18:21:34 00000000 s (main) signal handling initialized
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (net) cs357x: initialized (fd=5, port=23145)
• 2019/05/15 18:21:34 00000000 s (net) newcamd: initialized (fd=6, port=9001)
• 2019/05/15 18:21:34 00000000 s (net) -> CAID: 0B01 PROVID: 000000
• 2019/05/15 18:21:34 00000000 s (net) cccam: initialized (fd=7, port=16001)
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/ttyUSB0
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 00000000 s (emmcache) loaded 0 emmcache records from /volume1/@appstore/oscam/var/log/oscam.emmcache in 0 ms
• 2019/05/15 18:21:34 00000000 s (emmcache) loaded 0 emmstat records from /volume1/@appstore/oscam/var/log/oscam.emmstat in 0 ms
• 2019/05/15 18:21:34 00000000 s (anticasc) anti cascading disabled
• 2019/05/15 18:21:34 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:34 7CCEF11A c (client) plain dvbapi-client granted (user1, au=auto (1 reader))
• 2019/05/15 18:21:34 7CCEF11A c (dvbapi) dvbapi channelcache loaded from /volume1/@appstore/oscam/etc/oscam.ccache
• 2019/05/15 18:21:34 7CCEF11A c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
• 2019/05/15 18:21:34 331790C6 h (webif) webif: decompressed 180635 bytes back into 446056 bytes
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CSS.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2221490740;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/FOOTER.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;16619484;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/HEADERSHORT.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;267516716;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JQUERY.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1860189373;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JSCRIPT.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3536674531;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CLIENTHEADLINEBIT.tpl is in the old template format without revision info. Please consider upgrading it!
• 2019/05/15 18:21:34 331790C6 h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3093935193;1.20_svn;11517;-->
• 2019/05/15 18:21:34 331790C6 h (webif) HTTP Server running. ip=:: port=9000
• 2019/05/15 18:21:34 013C632E r (reader) skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2019/05/15 18:21:35 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:35 013C632E r (reader) skyv13 [mouse] card detected
• 2019/05/15 18:21:36 013C632E r (reader) skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2019/05/15 18:21:36 013C632E r (reader) skyv13 [mouse] Setting baudrate to 9600 bps
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [mouse] Card type: P1TV
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [mouse] Rom version: 10A7
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [mouse] Unable to get smartcard credit
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [mouse] found card system videoguard2
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [videoguard2] card detected
• 2019/05/15 18:21:38 013C632E r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
• 2019/05/15 18:21:39 013C632E r (reader) skyv13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
• 2019/05/15 18:21:39 013C632E r (reader) skyv13 [mouse] Setting baudrate to 153600 bps
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] Card type: P1TV
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] Rom version: 10A7
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] Unable to get smartcard credit
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] FuseByte: 25
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] Region Code: 00BO0102
• 2019/05/15 18:21:40 013C632E r (reader) skyv13 [mouse] Country Code: DEU
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] Pincode read: 1898
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] PCB settings: FF FF FF FF
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] serial: xxx, BoxID: 12345678, baseyear: 2004
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] ready for requests
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [mouse] found card system videoguard2
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] card detected
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] ------------------------------------------------------------------
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] +---------+----------+---------------------+---------------------+
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0038 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 003a --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 003b --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 003c --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 003d --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 003e --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0037 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0068 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0069 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 006a --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 006b --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0065 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0066 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0067 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 006f --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0070 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0071 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0072 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0073 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007b --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0074 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0075 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007d --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0077 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0081 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 008e --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00d4 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e4 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e5 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00f0 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00f3 --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00ff --| 2019/06/04-01:00:00 |
• 2019/05/15 18:21:41 013C632E r (reader) skyv13 [videoguard2] ------------------------------------------------------from-ins70--
• 2019/05/15 18:21:42 331790C6 h (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:42 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:43 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:44 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:45 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:46 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:47 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument
• 2019/05/15 18:21:48 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument

 

[pehedima]

Da würde ich mal sagen, da läuft oscam nicht richtig.
Wo kommt die denn her?
Erstmal eine andere installieren.

Poste mal bitte die oscam.version

 

[LennyW]

Das ist die oscam-11517-1.88f6281.spk vom Nimloth SPK Server: Oscam auf Synology DS413j
Es gibt eine aktualisierte Datei (oscam 11518). Behalte ich die Einstellungen wenn ich diese installiere?

 

[pehedima]

Sicherer ist, die Configs vorher zu speichern.
Ich weiß nicht, was in diesen Paketen alles enthalten ist.