OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

[Nambo]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

habe jetz oscam.server so geändert
[reader]
label = Kabel_bw
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 2
emmcache = 1,3,2
CAID = 098E
services = Kabel_bw
ident = 000000
BoxID = 12345678
cardmhz = 375

011/04/03 17:02:55 B78136C0 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4879 (i686-pc-linux)
2011/04/03 17:02:55 B78136C0 s version=1.00-unstable_svn, build #4879, system=i686-pc-linux, nice=-1
2011/04/03 17:02:55 B78136C0 s client max. idle=120 sec, debug level=0
2011/04/03 17:02:55 B78136C0 s max. logsize=10240 Kb
2011/04/03 17:02:55 B78136C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/04/03 17:02:55 B78136C0 s auth size=5004
2011/04/03 17:02:55 B78136C0 s services reloaded: 0 services freed, 0 services loaded
2011/04/03 17:02:55 B78136C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/03 17:02:55 B78136C0 s signal handling initialized (type=sysv)
2011/04/03 17:02:55 B78136C0 s 9 service-id's loaded
2011/04/03 17:02:55 B78136C0 s oscam.tiers loading failed
2011/04/03 17:02:55 B78136C0 s 1000 provid's loaded
2011/04/03 17:02:55 B78136C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/03 17:02:55 B78136C0 s monitor: initialized (fd=7, port=988)
2011/04/03 17:02:55 B78136C0 s camd33: disabled
2011/04/03 17:02:55 B78136C0 s camd35: initialized (fd=8, port=20248)
2011/04/03 17:02:55 B78136C0 s cs378x: disabled
2011/04/03 17:02:55 B78136C0 s newcamd: Bind request failed, waiting another 119 seconds
2011/04/03 17:02:55 B78136C0 s newcamd: initialized (fd=9, port=22000, ip=192.168.178.24, crypted)
2011/04/03 17:02:55 B78136C0 s CAID: 098E
2011/04/03 17:02:55 B78136C0 s provid #0: 000000
2011/04/03 17:02:55 B78136C0 s cccam: disabled
2011/04/03 17:02:55 B78136C0 s radegast: disabled
2011/04/03 17:02:55 B78136C0 s http thread started
2011/04/03 17:02:55 B78136C0 s creating thread for device /dev/ttyUSB0
2011/04/03 17:02:55 B78136C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/03 17:02:55 B78136C0 s waiting for local card init
2011/04/03 17:02:55 B780B280 r reader thread started (thread=B780B280, label=kabel_bw, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=375)
2011/04/03 17:02:55 B7812280 h HTTP Server listening on port 16002
2011/04/03 17:02:57 B780B280 r kabel_bw card detected
2011/04/03 17:03:04 B780B280 r ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00 
2011/04/03 17:03:05 B780B280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/03 17:03:08 B780B280 r card system not supported
2011/04/03 17:03:08 B780B280 r Normal mode failed, reverting to Deprecated Mode
2011/04/03 17:03:15 B780B280 r ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00 
2011/04/03 17:03:16 B780B280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/03 17:03:20 B780B280 r card system not supported
2011/04/03 17:03:20 B780B280 r card initializing error
2011/04/03 17:03:20 B78136C0 s init for all local cards done
2011/04/03 17:03:20 B78136C0 s anti cascading disabled

@tyrotronic was für eintrag hast du im cardclient.conf

 

[GTD Bastion]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

Und nochmal...

setzte im Reader deprecated = 1 !!!

 

[Nambo]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

Und nochmal...

setzte im Reader deprecated = 1 !!!

habe eingefügt

>> OSCam <<  cardserver started at Sun Apr  3 17:22:19 2011
-------------------------------------------------------------------------------
2011/04/03 17:22:19 B78106C0 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4879 (i686-pc-linux)
2011/04/03 17:22:19 B78106C0 s version=1.00-unstable_svn, build #4879, system=i686-pc-linux, nice=-1
2011/04/03 17:22:19 B78106C0 s client max. idle=120 sec, debug level=0
2011/04/03 17:22:19 B78106C0 s max. logsize=10240 Kb
2011/04/03 17:22:19 B78106C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/04/03 17:22:19 B78106C0 s auth size=5004
2011/04/03 17:22:19 B78106C0 s services reloaded: 0 services freed, 0 services loaded
2011/04/03 17:22:19 B78106C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/03 17:22:19 B78106C0 s signal handling initialized (type=sysv)
2011/04/03 17:22:19 B78106C0 s 9 service-id's loaded
2011/04/03 17:22:19 B78106C0 s oscam.tiers loading failed
2011/04/03 17:22:19 B78106C0 s 1000 provid's loaded
2011/04/03 17:22:19 B78106C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/04/03 17:22:19 B78106C0 s monitor: initialized (fd=7, port=988)
2011/04/03 17:22:19 B78106C0 s camd33: disabled
2011/04/03 17:22:19 B78106C0 s camd35: initialized (fd=8, port=20248)
2011/04/03 17:22:19 B78106C0 s cs378x: disabled
2011/04/03 17:22:19 B78106C0 s newcamd: Bind request failed, waiting another 119 seconds
2011/04/03 17:22:20 B78106C0 s newcamd: Bind request failed, waiting another 118 seconds
2011/04/03 17:22:21 B78106C0 s newcamd: Bind request failed, waiting another 117 seconds
2011/04/03 17:22:22 B78106C0 s newcamd: initialized (fd=9, port=22000, ip=192.168.178.24, crypted)
2011/04/03 17:22:22 B78106C0 s CAID: 098E
2011/04/03 17:22:22 B78106C0 s provid #0: 000000
2011/04/03 17:22:22 B78106C0 s cccam: disabled
2011/04/03 17:22:22 B78106C0 s radegast: disabled
2011/04/03 17:22:22 B78106C0 s http thread started
2011/04/03 17:22:22 B78106C0 s creating thread for device /dev/ttyUSB0
2011/04/03 17:22:22 B78106C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/03 17:22:22 B78106C0 s waiting for local card init
2011/04/03 17:22:22 B7808280 r reader thread started (thread=B7808280, label=kabel_bw, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=375)
2011/04/03 17:22:22 B780F280 h HTTP Server listening on port 16002
2011/04/03 17:22:25 B7808280 r kabel_bw card detected
2011/04/03 17:22:31 B7808280 r ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00 
2011/04/03 17:22:32 B7808280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/03 17:22:37 B7808280 r card system not supported
2011/04/03 17:22:37 B7808280 r card initializing error
2011/04/03 17:22:37 B78106C0 s init for all local cards done
2011/04/03 17:22:37 B78106C0 s anti cascading disabled

das muß am cardclient.conf liegen?

 

[GTD Bastion]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

Was hat deine Cardclient.conf mit Oscam zu tun?
Das Problem liegt bei der initialisierung.

Nehm mal in der Oscam.conf alles was mit Newcamd zu tun hat raus und teste nochmal.

 

[tyrotronic]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

@Nambo


hier mal meine

# OSCam Konfiguration IPC - oscam.conf

[global]

nice = -1
WaitForCards = 1
logfile = /var/log/ipc/oscam.log
maxlogsize = 10240

[newcamd]
key = 0102030405060708091011121314
port = 33500@098E:000000
httpport = 9999
httpuser = user
httppwd = pass
httpcss =
httptpl =
httpscript =
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 0
httpreadonly = 0

#Oscam server

[reader]
label = Kabel_bw
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
CAID = 098E
services = Kabel_bw
ident = 000000
BoxID = 12345678
cardmhz = 375


oscam.service

[Kabel_bw]
caid=098e
#srvid= all
srvid=EF10,EF11
provid=000000


#Oscam user


[account]
user = kabw
pwd = kabw
group = 1
monlevel = 4
au = kbw
services = Kabel_bw
caid = 098E
ident = 098E:000000



suche noch die kabelbw srvid

habe hier diese aber die funktioniert nicht
#OSCAM.SRVID created by Hk2k2, last change 0402111505

#Kabelbw Caid:098e
098E:000000:003C "Premiere Star - Kinowelt TV [NDS KabelBW]"
098E:000000:003D "Premiere Star - TCM Germany [NDS KabelBW]"
098E:000000:003E "Premiere Star - AXN Deutschland [NDS KabelBW]"
098E:000000:0040 "Premiere Star - Playhouse Disney Germany [NDS KabelBW]"
098E:000000:0041 "Premiere Star - Toon Disney Deutschland [NDS KabelBW]"
098E:000000:0042 "Premiere Star - Boomerang Germany [NDS KabelBW]"
098E:000000:0043 "Premiere Star - E.Clips [NDS KabelBW]"
098E:000000:6FFF "Premiere Star - MTV Music [NDS KabelBW]"
098E:000000:3393 "Premiere Star - Animax [NDS KabelBW]" gleiche prob mit dem smargo
098E:000000:3394 "Premiere Star - Cartoon Network Germany [NDS KabelBW]"
098E:000000:4461 "Premiere Star - Sat 1 Comedy [NDS KabelBW]"
098E:000000:4462 "Premiere Star - Kabel Eins Classics [NDS KabelBW]"
098E:000000:3331 "Premiere Star - NASN (P) [NDS KabelBW]"


ps : ich kann nur sagen hatte das gleiche prob mit dem smargo mit der easymouse2 gings dann ohne probs mit smargo läuft meine kabelbw karte nur im CCcam

 

[GTD Bastion]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

Thema hat sich erledigt, da es inzwischen läuft

 

[tyrotronic]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

suche noch die kabelbw srvid

habe hier diese aber die funktioniert nicht
#OSCAM.SRVID created by Hk2k2, last change 0402111505

#Kabelbw Caid:098e
098E:000000:003C "Premiere Star - Kinowelt TV [NDS KabelBW]"
098E:000000:003D "Premiere Star - TCM Germany [NDS KabelBW]"
098E:000000:003E "Premiere Star - AXN Deutschland [NDS KabelBW]"
098E:000000:0040 "Premiere Star - Playhouse Disney Germany [NDS KabelBW]"
098E:000000:0041 "Premiere Star - Toon Disney Deutschland [NDS KabelBW]"
098E:000000:0042 "Premiere Star - Boomerang Germany [NDS KabelBW]"
098E:000000:0043 "Premiere Star - E.Clips [NDS KabelBW]"
098E:000000:6FFF "Premiere Star - MTV Music [NDS KabelBW]"
098E:000000:3393 "Premiere Star - Animax [NDS KabelBW]" gleiche prob mit dem smargo
098E:000000:3394 "Premiere Star - Cartoon Network Germany [NDS KabelBW]"
098E:000000:4461 "Premiere Star - Sat 1 Comedy [NDS KabelBW]"
098E:000000:4462 "Premiere Star - Kabel Eins Classics [NDS KabelBW]"
098E:000000:3331 "Premiere Star - NASN (P) [NDS KabelBW]"

 

[Nambo]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

ich habe mir jetz easysmartmouse2 zugelegt da smargo jedesmal aussetzer hatte
wo sollen die jumper vom easysmartmouse sein?

Lieferzustand

5V Phönix 3.579MHZ

 

[tyrotronic]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

alle unten 5volt,phönix,3,57

 

[tyrotronic]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

hatt jemand schon ne srvid für kabelbw ????

 

[GTD Bastion]

AW: OSCAM KABELBW und HD+ KARTE gehen ständig zu wie abhilfe schaffen !!need help!!

au dir doch einfach selber eine!?
Du siehst doch auf was für einem Kanal du schaltest...daraus baust du dir eine eigene.